Reboot your iPhone or iPad correctly. How to reboot an iPad


What brought you to this article is such a common problem as iPad freezing. Despite the fact that it may seem completely frivolous, some serious problems can go hand in hand with it, primarily affecting operating system tablet.

Freezing can occur due to many factors and its “treatment” will also depend on the specific case. Next, we will look at the most common of them and offer options for getting rid of this annoying glitch.

Causes and solutions to freezes

Each case of device freezing is individual.

In general, several categories of problems can be distinguished:

  • lack of response to key presses or interaction with the sensor;
  • inability to get to the “Home” screen;
  • iPad freezes and won't turn off in sleep mode;
  • the gadget does not respond to attempts to turn it off;
  • Freezing when updating or resetting settings;
  • white screen appears.

For these failures, the ways to get rid of them will also be different. We'll talk about this in more detail later.

When updating

If the iPad freezes during the update process, then to restore its functionality you will need to delete current version software and return the one that was installed before it.

For this we need:


Important! Make sure that cables or power to the tablet are not disconnected during the update process. Even if the process completes successfully, the device may not have files needed for it to complete. correct operation. In the future, this can lead to serious problems and the need to reinstall the OS.

When resetting

The most common cause of freezing is internal errors tablet. What to do if one of them appeared right during the update or firmware of the device? Is your tablet frozen and unresponsive?

Problems in in this case there may be several:

  • software error;
  • problem with the firmware file;
  • The update process failed.

When faced with one of them, you should understand that they are quite serious and can lead to errors in the operation of the device in the future. The solution may be to reflash and update again.

Attention! To avoid such problems, it is recommended to use a known working firmware file and not interrupt the tablet update process .

When turned on on apple

Another common mistake is the device freezing on the apple - the startup screensaver.

Most probable reasons This iPad behavior may be considered:


  • start the update again;
  • remove applications causing the conflict;
  • reinstall the OS using proven firmware;
  • remove contaminants or take the device for repair.

It also happens that the tablet’s operation is interrupted by the appearance of a white screen. The reasons for this phenomenon may be hidden in both software and hardware failures.

To help get rid of this problem:

  • Turn off iPad by holding down the Home and Sleep buttons for about 10 seconds;
  • the so-called “hard reset” - pressing the “Home” button located on the front side of the device and the “Power” button located on top.

Important! You must hold the buttons until full reboot tablet until the splash screen with an image of an apple appears on the screen. During forced restart data is not deleted from the device.

Video: Treatment of an idevice from the “eternal apple”

How to restart iPad if it's frozen

If any iPad problems Often a simple reboot is sufficient. But when frozen, it may not respond to normal restarts, touches, and pressing other keys.

Will help forced reboot, which is quite simple to do:


If the problem persists, repeat this procedure, then contact a repair shop.

Note! The reboot time for each specific case can range from 2 to 30 seconds. After this, the device will be ready for use again and the information on it will be completely saved. This process is similar for iPad 2, as well as other devices Apple.

Separately, it is worth mentioning that the tablet freezes due to mechanical damage.

The most common of them are:


If after this iPad operation If you have problems, you should pay attention to several points:

  1. if moisture gets on the device, it must be removed immediately using a soft cloth, sponge or dry wipes;

Important! A hairdryer is also suitable for this, but it is very important not to use heating modes - this can lead to overheating and subsequent breakdown of the device. You can remove moisture from it only with cold air and very carefully.

  1. try not to leave the iPad in the sun for a long time and carry it only in a bag, protecting it from bad weather;
  2. Clean your tablet from dust in a timely manner, either on your own or by contacting a service center;
  3. after a fall, if errors continue to appear again and again, we recommend that you seek professional help.

Attention! It is recommended to disassemble the tablet yourself only if you already have similar experience.

So, we have looked at all the most common reasons that can lead to a tablet freezing. In many of the above cases, the problem that has arisen can be easily solved at home, but when the failure is not software, but hardware in nature, optimal solution there will be a call to a specialist.

Tablet computers have become a part of our lives. Gradually, they have eliminated the need for everyday use of a personal computer, since for the average user there are vanishingly few tasks that cannot be performed from an iPad. Of course, if we are talking about something heavy and resource-intensive, a tablet is indispensable. But we are talking about the average user who surfs the Internet, communicates in instant messengers, social networks, watches videos, checks email, and plays casual games. If it is not important for the user big screen, and he prefers to do all this while sitting on the couch rather than at a table, then the iPad is more than enough.

Even a schoolchild can restore the functionality of the gadget

However, despite the excellent quality of hardware in Apple tablets, even they sometimes have performance problems. Abnormal operation of the device may require a reboot. But besides freezing, it may be required in other situations that are quite harmless.

When to reboot

Uninterrupted operation of the device is what manufacturers strive for and what users want. In theory, this is how it should be, but reality puts everything in its place: the uptime (working life without rebooting and shutting down) of a mobile device such as an iPad is limited; this is due to running applications that take up memory. If all the memory is occupied, the tablet freezes. Before you restart your iPad, check to see if any of the following can be unloaded from memory. running applications. It may be possible to get by without crashing. The fact is that with this action, the data stored in memory will not be saved, and you will lose the result of your work. If you managed to reboot your iPad normally, then that’s very good.

A standard reboot, by the way, is performed according to the same scheme for all Apple devices: Press and hold the power key until a window prompting you to turn off the power appears. Press this button, it will turn off, and then hold it again to turn the device back on. If you do this regularly (say, once every 1-2 days), then the device’s memory will always be free, and there will be no lags in the interface. The iPad will not freeze and will work normally.

As you understand, you can restart an iPad not only if it is frozen. After installing a heavy application, updating system settings or firmware, a restart may also be required. But these are all standard modes that do not require an emergency reset of the device. But restarting an iPad or iPad mini if ​​it's frozen is a little different.

An emergency situation

The fact is that when the entire memory of the device is occupied, it does not respond to system calls. It is not clear what to do if the iPad freezes, because the power button does not turn it off at the hardware level, but generates a call to a software procedure at the operating system level. Apple engineers provided for this possibility and added the ability to force a reboot to the iPad if it freezes and does not respond to requests. As practical experience shows, testing and modifying applications in the AppStore still does not guarantee their flawless operation. Therefore, such an action sometimes needs to be done.

For emergency reboot On the iPad, you need to simultaneously press the power button and the Home button and hold them in this state for 10–15 seconds. A logo with a bitten apple will appear on the screen, and the device will begin the restart procedure: it will urgently end applications without saving data, delete all environment variables from memory, unload the stack and terminate all processes. After this, the operating system will receive a signal to immediately reboot.

Needless to say, this should only be done as a last resort. All work will be lost, and if you, for example, tried to send important message, you will have to dial it again. On the other hand, if the iPad freezes, what else can you do but reboot it? This will bring the device back to life and reboot iOS into in working condition. Please note that this combination of buttons is typical for the entire line of Cupertino devices. Standardization adds convenience to the user, because there is no need to remember one reboot algorithm for the iPad and another, say, for the iPad mini.

Afterword

So, now you know how to restart a frozen iPad. This should only be done as a last resort. At the same time, we recommend doing a regular reboot periodically in order to free operating system resources from application data that clogs up memory. If the iPad freezes constantly, most likely one of the installed applications is simply taking up all the space. available memory. In this case, simply delete it.

Articles and Lifehacks

New owners of iOS devices are constantly faced with various kinds of difficulties when trying to master their operation. In particular, a very common question remains: how to restart ipad. At first glance, this operation seems to be the simplest, but in reality it turns out that not everyone can understand it intuitively. So let's get started.

Reboot the iPad in the standard way

If we are interested in the most common reboot, we hold down the power button, that is, “Power” (depending on the iPad model, it can be located on the top or side) and wait until the prompt to turn off the device appears. Turn off the tablet and turn it on again, holding the power button until the “apple” logo appears.

Why might a regular reboot be necessary? If the tablet, for example, freezes, or to clear the RAM. Now - about a more radical method.

Experienced users of the Apple system probably know this procedure, and have resorted to it more than once. As a rule, it saves you from software failures (both minor and more significant), helps if the tablet is frozen, and in general serves as a quick alternative to a standard reboot. In other words, you simply need to know about it.

So, how to restart your iPad this way? We simultaneously press “Home” (the only hardware key on the front side of the gadget) and the already familiar “Power” button for ten seconds until the logo appears on the screen.

If we performed a hard reboot due to some kind of failure, but the problem was not resolved, it may be worth trying something more radical measures– for example, reinstalling firmware or rolling back user settings.

If the iPad does not react in any way to our actions and does not turn on, it is recommended to connect it to the charger and leave it in this position for half an hour (or even an hour). If the charging screen still does not appear, you should check the connector, Charger and USB cable for damage or dirt, and make sure everything is securely connected.

If your tablet takes too long to boot, or the boot process does not progress beyond the Apple logo, you need to connect it to your computer using a USB cable and open iTunes client. After this, you should perform a hard reboot in this connected state and proceed to recovery or update. If we select "Update" iTunes app will attempt to reinstall the system without losing important data.

How to restart ipad. What to do if your iPad is frozen. Options, ways to solve the problem.


Almost every owner of an Apple device is not immune from incorrect operation of their device. Faced with the problem of Apple freezing electronic gadget, when the iPhone or iPad does not respond to any actions - touching the screen, pressing the “Home”, “Power” keys, does not wake up from sleep mode, inexperienced users begin to panic. In fact similar problem, unless of course it lies in technical malfunction device problem can be solved very simply, and there is no need to resort to the services of service center specialists. You just need restart ipad, iPhone. In this review, we will look at the reasons for “freezing” of “Apple” equipment, simple effective ways, options for solving this problem.

Rebooting iPad

While using an Apple device, users may encounter that the tablet freezes while working with some application or program, the device does not go to the Home screen, there is no interaction with the sensor, the device does not respond to key presses, does not turn off, freezes on the apple long time Doesn't wake up from sleep mode. What to do, if iPad frozen, how to restart iPad? To resume the correct operation of the device, first of all, it is necessary to find out the reasons for such a malfunction in the operation of the electronic gadget.

An iPad or other Apple may freeze due to technical problems, failures in the operation of electronic modules, errors in the software, or failure to update the firmware. iPad freezes may occur if moisture, dust, or foreign objects get inside the device case, as well as if the tablet overheats/overcools.

Most often, incorrect operation of the device is caused precisely by failures, errors in software. Therefore, do not rush to contact the service center; in most cases, the problem can be solved yourself by restarting your iPad.

How to restart iPad

You can reboot Apple devices and restart the system:

  • in a standard way;
  • hard reboot (Hard Reset);
  • by rebooting with software options.

Standard iPad reboot

If the iPad is not frozen, but you need to restart it standard method, press the Power button until a slider appears with the words “Turn off”. Once the slider is displayed, use your finger to move it to the right. Shutting down will take from five to 20 seconds. You can see the shutdown status icon in the center of the display. Then turn on the iPad by quickly pressing the Power key. After a while, the “apple” logo will appear on the display and the tablet will boot again.

Power key on all iPad models, iPod touch located at the top of the device. On an iPhone, the Power key can be at the top or on the right, depending on the model of the mobile device.

Hard reboot iPad

A hard reboot is performed if the iPad is frozen and does not respond to actions. In this case, simultaneously press the “Home” key, which is located on the front side of the tablet, and the Power key. Hold it until the device is completely rebooted, until a white apple appears on the screen. Sometimes such a procedure can take from two to twenty seconds. A hard reset can be used for other Apple devices.

After turning off, after a few seconds the device will start on its own and will be ready for use.

Software reboot method



This method is used in case of a malfunction of the “Power” key. Reboot the device without resorting to physical buttons you can use the Asisstive Touch function, to activate which go to Settings->General->Universal Access->Assistive Touch.

After launching the Asisstive Touch panel, select the “Device” item. Click on the “Lock Screen” tab without releasing your finger. After two or three seconds, a shutdown slider will appear on the screen, which we move to the right, after which the iDevice will turn off. To start the device without Power buttons, connect the iPad to the PC via a USB cable. The device will boot as normal.

Important! During the process of rebooting the device, the RAM is cleared, but all media files (games, programs, applications), and personal settings will be saved. After reboot, if the device supports a SIM card, enter the password.

Now let's look at other options that led to the iPad freezing.

What to do if your iPad is frozen

Option 1

If the iPad freezes while working with a program or application. does not respond to any actions, this behavior of the device is most likely due to the installation of “crooked” software. To solve the problem, you need to force close the program. For this:

Press and hold the “On/Off” button of the gadget until the “Turn Off” and “Cancel” buttons appear.

Release the power button and press the “Home” key for five seconds.

The application should complete its work, after which the desktop appears.

If this doesn't help, reboot iPad standard or any other method described above. If the device freezes when launching the same applications and programs. We recommend removing them from your device or reinstalling them from the “Purchased” section.

Option 2

If the gadget does not respond to touch, pressing the Home and Power buttons will help force a reboot of the Apple device. Essentially this is the same Reset on your PC. To restart your iPad, simultaneously hold down the “Power” and “Home” buttons for 6-10 seconds. After such actions, the tablet should reboot and you can resume work.

Option 3

If there is an image on the display, but the tablet does not respond to pressing or other user actions, simultaneously hold down the “Home” and “Sleep/Wake” keys for at least ten seconds.

Option 4

iPad stuck on apple this problem may occur if there is a failure during the update, incorrect installation applications, programs, mechanical impact to the device. If the “eternal apple”, the company’s fruit logo, is displayed on a black background, restore working condition devices is only possible by connecting the iPad to the PC using special application iTunes.

It is also possible to solve this problem by reinstalling the software, removing conflicting software,

Option 5

It often happens that after leaving your iPad turned on at night, in the morning the device does not respond to touch, the buttons do not function, the screen does not light up, simultaneously hold down the On/Off and Home keys for about ten seconds. Until the screen lights up, the Apple logo will not light up.

Important! If during the reboot process iPad display The cable will be displayed - connect the tablet to the PC via a USB cable, restore the device via iTunes.

Option 6

If when turning on the iPad appears White screen, you can fix this problem by simultaneously holding down the “Home” and “Sleep” keys for ten seconds. A hard reboot of the Apple gadget will also help.

Important! You need to hold down the buttons until the device is completely rebooted, until the screensaver with the Apple logo appears on the display.

iPad freezes intermittently

During operation, faced with the problem of periodic glitches in the operation of the device, if the iPad or iPhone often freezes, the methods described above do not help, most likely you will have to reflash the iOS mobile device, returning to the factory settings.

In most cases, the reason why the iPad freezes is due to internal device errors that can occur during the process of firmware updating or updating the device. Perhaps the cause is a software error, problems in the firmware file, or a failure during the update. What to do if the iPad is frozen and does not respond to actions? You need to understand that any failures in the software will lead to incorrect operation devices.

To do this, we perform the following steps:

  • We connect the iPad to a PC or laptop.
  • Open the iTunes main page and go to the management menu for your device.
  • Select your device in the list that opens.
  • In the “Devices” menu, select and click on the “Restore” tab, after which the process of restoring the gadget will begin.

Advice! To reset the device parameters, you may have to use DFU mode.

After following the steps above to restart your iPad latest version iOS, iTunes will notify you with a message: do you want to set up the device as new or restore all settings from backup copy, saved, for example, in online cloud services.

If all methods for solving this problem did not lead to positive result, iPad freezes, most likely the problem is of a technical nature. And in this case, diagnostics are required, the assistance of specialists from an authorized service center. It is practically impossible to repair a device without experience or equipment.

Sometimes the iOS device freezes and newbies constantly face the following problem: How to restart iPhone, iPad or iPod Touch? It would seem like a simple operation, but, nevertheless, it’s still worth explaining how it’s done. And simply this knowledge is useful in itself. There are 3 ways to reboot the system.

  • Standard method

Standard method

In fact in the usual way There is rarely a need to reboot the device. But sometimes, in case of some glitches or before starting a heavy game, a reboot is required.

If your iPhone, iPad, or iPod Touch is not frozen, and you just need to restart it for one reason or another, then press the Power button until the slider with the words “Turn Off” appears.

When the slider appears, move the slider to the right with your finger. The iPad will begin to shut down. Shutdown may last 10-20 seconds - you will see the shutdown status in the middle of the screen (a barely noticeable icon in the center).

Next, turn on the iPad: this can be done by quickly pressing the Power button. After a while, an apple icon will appear on the screen and the device will reboot.

Note: The Power button on all iPad and iPod Touch models is located at the top of the device (the only button). On iPhones, this button is located at the top (iPhone 5S, 5C and older) or on the right (iPhone 6, 6 Plus and later).

Tough reboot iPhone, iPad or iPod Touch is used when your iDevice is frozen and does not respond to any actions.

So, let's take the device in hand. Press the button Home(it’s the only one on the front side) and at the same time a button Power, which is at the top (for iPhone 6, 6 Plus and newer on the right). Hold until a complete reboot (a white apple appears on the screen).

The device will turn off and restart itself.

The third reboot method is the trickiest - it is suitable for those who have a faulty Power button, or people with disabilities. The Assistive Touch function comes to the rescue, which can be activated through: Settings->General->Accessibility->Assistive Touch. As with taking screenshots, there is a small life hack that allows you to reboot iOS programmatically without resorting to physical buttons.

Launch the Asisstive Touch panel, then click on “Device”

Select “Lock Screen” and keep your finger on it without releasing it.

After 2-3 seconds, a screen with a “Turn Off” slider will appear. Slide it to the right and the iDevice will turn off. To turn on your iPhone, iPad, iPod without the Power button, simply connect the device via a USB cable to your computer. The device will boot in normal mode.

What happens during a reboot? Cleared RAM. The programs and games that are installed on your iPhone or iPad will not disappear anywhere. The settings are also not reset, but after rebooting you will need to enter the PIN code of the SIM card that is inserted into the iPhone/iPad.

The instructions are relevant for everyone iPad models, iPhone and iPod Touch!


2024 gtavrl.ru.