Update megaphone operator settings. The inscription “Carrier” opposite the operator line in the settings of the iPhone and iPad - what is it and what to do


Recently, due to the iOS 12.1.2 bug, iPhone users began to notice problems with cellular communications, calls and Internet access on their smartphones.

Usually when similar problems in the left top corner iPhone screen the message “No network” is displayed. In addition, a message appears on the screen indicating that the operator settings update was unsuccessful. Your smartphone will not be able to make calls or access cellular data until it is updated.

Below we will tell you several ways to solve the cellular connection problem on iPhone.

How to solve cellular communication problems oniPhone WithiOS 12.1.2

There is a temporary solution that involves changing your iPhone settings. Not all users will like it, but at least the method works. It's better than nothing.

  1. Open the application Settings on your iPhone.
  2. Select cellular.
  3. Select Calls byWi– Fi and press the switch to enable the function. For some, this may already solve the problem.
  1. Go back and select Data Options.
  2. Click Turn onLTE and select Data only.


In most cases, the problem will be fixed and services cellular communications will start working again. However, you will not be able to use Wi-Fi calling and voice messages via LTE. For some users, it was enough to change only one of these settings.

You don't have to restart your smartphone for the changes to take effect, but it won't hurt. You can use a regular reboot rather than a forced reboot.

Updating operator settings

For some users, even after changing the settings, a message appears indicating that the operator settings update was unsuccessful. In this case, you should request an update from the operator itself and, if available, install it. These updates are not part of the software update. Here's how to install them:

  1. Connect your iPhone to the Wi-Fi network if you haven't done so before.
  2. Open the application Settings and go to Basic.
  3. Select About this device, scroll to section Operator, wait a moment and if an update appears, click Update.

The update will not be available for everyone, but it’s still worth checking, because it can solve all problems.

If you've tried all the methods and the problems persist, you may want to try something else.

  • Force restart iPhone:
    • How to Force Restart iPhone 8 and iPhone 8 Plus
  • Reset your iPhone's network settings, but be aware that you'll have to re-enter your passwords afterwards. Wi-Fi networks to connect.
  • If calls on iPhone work and Mobile Internet no, use tips on how to solve Internet problems.
  • Save backup copy your iPhone and then restore it.
  • Check if available iOS update, and install it.
  • Contact your carrier and/or Service Apple support, if none of this helped.


Good luck to everyone!
Just a few hours ago the problem with iMessage activation& FaceTime with the operator from the subject (check!), when a new one immediately surfaced...
Has gained new iPhone 5c, inserted SIM card Megafon S-Z(St. Petersburg) and did not automatically receive operator settings via the cellular network: network settings/data transfer/answering machine, etc. (although on the previous iPhone 5 I always received everything automatically, I didn’t change the SIM card).
I called Apple Care and they replied that for the new phones 5c and 5s there have been some changes in the firmware and data from the operator is now received by the device in some other format. Those. operators need to send them some other way. They also noted that before official release of these devices in Russia, it is difficult for them to comment on what is happening at Megafon. At the same time, they said that MTS and Beeline should not have such problems on new devices (for obvious reasons).
Well, what to do, I entered the settings manually - the Internet and mms work. But the sad thing is this...
1) the operator’s logo is now MegaFon RUS (it was simple and neat MegaFon) - takes up a lot of space in the upper left corner and constantly moves left and right (I know that Megafon sends the operator’s display to MegaFon over the network)
2) the answering machine does not work, in the Phone application, when you click on the corresponding button, a message appears on the screen - see screenshot (as you know, enter it manually in the settings iPhone phones impossible)
3) if you go to Settings->Phone-> there is no item (if I don’t confuse the name) “MegaFon Services”, where there was an answering machine, rescue service, etc. (see screenshot)
4) maybe something else, I unfortunately don’t know, the entire list of settings that the operator sends via the cellular network to subscribers when they install a SIM card in a new device
That is, roughly speaking, the phone did not automatically accept the settings from the operator via the cellular network (because apparently it does not understand them now) and they naturally were not registered in the device for correct operation(Let me remind you that on iPhone 5, with the same SIM card, all settings were accepted correctly).
There is confirmation that the 5s has the same canoe.
+ on top of that, every time you connect 5c to your computer (it started immediately after successful activation), iTunes displays a window asking you to update the operator settings (see screenshot). Well, if you remember, it was like this on early firmware, the tuna downloaded the MegaFon_ru.ipcc file from Apple servers and uploaded it to the device. Naturally fill in/don't fill in - it didn't help, because... As far as I know, starting from iOS 4.0, operator settings come automatically via cellular network when a SIM card is inserted into a new device.
It’s clear that it’s just stupid to wait, but I wonder how things are going for you, dear owners of the new 5c and 5s phones?!?! Megafon St. Petersburg is of course most interested. Well, any thoughts on the topic, welcome...
Thank you for your attention!

All Apple users mobile gadgets, which are known to work on operating membrane iOS knows that there is a possibility on the mobile platform. The user, when he needs to update the settings, can carry out this procedure without unnecessary difficulties. At the same time, he has the opportunity to choose in which mode to do this. Note that in currently Both manual and automatic modes are available.


If we talk about the operator settings in more detail, they are files small size. They contain parameters from Apple and provider cellular services. Among those present in them there are settings and call parameters. These files also contain settings for data transfer and messages. In addition to them, there are settings for the modem and answering machine. Notifications about the installation of updates come to gadgets from time to time.


If you decide that it’s time to spend on your gadget, then in order to do this in manual mode, you need to perform the following sequence of actions:


1. First of all, you need to make sure that your iPhone is connected to global network. Once you are sure of this, you should open the Settings app.

2. Next action you need to go to the Basic menu, and then follow the About this device item.

3. Then all you have to do is wait. If the update option is available, the user may see the “ ” window. When new settings appear, a corresponding notification will appear on the user’s gadget. In addition, the owner of the gadget will be asked to install the application.

Sometimes by operators mobile communications so-called mandatory updates are released. In this case, the notification received on the user’s device informs that the update has been downloaded and its installation has been completed. There is no Refresh button. Instead there is “OK”.


Mandatory loading of operator settings is required when setting up. It is worth saying that they are only available for supported providers. In the event that the user does not use the services of a partner operator, then operational settings it can be done manually.


If you need to find out which version of settings are installed on your gadget, then in this case you need to go to the Settings section. Then proceed to Basic. And then go to About this device. In the “Operator” field you can find the information you are interested in.

Every phone connected to the Megafon network wonders how to set up the Internet? Without the correct settings, it will be impossible to use the network and MMS. This also applies to regular phones, and widely used smartphones.

When you install a SIM card in any modern mobile device, it is configured automatically. However, sometimes it happens that the settings themselves were not installed or were not registered - then you need to configure the phone manually. This review will tell you how automatic configuration occurs, as well as how to enter the settings yourself.

Ordering Internet settings from Megafon

Using SMS commands, the user can get Megafon Internet settings for his phone. If you need to set up access, you must send to the number 5049 number “1”, after which you will receive an SMS containing your profile settings. You need to save them and activate your profile, then try to log into the network. On Megafon, GPRS settings are also available in help desk, to do this, dial the number 0500, name the model of the phone you are using and wait for a service SMS with the settings.

Having visited the Megafon website, on it, in the Self-Service Services section, you can find another subsection with Settings mobile devices, in which they are ordered individual settings, suitable for any model mobile phone. We select the phone brand, model, as well as the ordered data in the drop-down lists, below we enter the phone number used to send the required settings.

Internet settings Megafon manually

APN (or access point) settings on Megafon can be done manually. To do this, create a new profile, containing the following data:

  • Profile name: indicate, for example, Megafon (absolutely any names are acceptable here);
  • Home page: type megafon.ru (you can also enter any address, since this setting concerns home page, used by the phone's built-in browser);
  • Access point: enter internet;
  • Authentication: select “normal”;
  • Login with password: no need to fill out.

There may be settings for a proxy server, but it is recommended to disable the use of a proxy; you do not need to fill in any data here. After filling specified settings, by opening the browser, you can try to launch the Internet on your phone.

If you need to figure out how to set up the Internet on Megafon using 3G technology, then there is no need to additional settings third generation network, just go to the item called “Properties” mobile networks» and check that there is a search for a WCDMA network (or the forced registration function for WCDMA networks is installed).

When making the above settings, remember that the menu item in which the Internet profile settings are located, depending on specific model smartphone may be different. In addition, there may also be differences in the names of the fields to be filled in, for example, “Access Point”, as well as “APN” - this is a similar name.

Setting up MMS on Megafon

Procedure MMS settings for the Megafon operator is almost identical to the order for the Internet. To get a working function that allows you to receive and also send multimedia MMS messages, you need to send the number “3” to the number 5049. After a short time, a message will be sent to your phone containing necessary settings: you need to save them, then apply them and try to send MMS to any Megafon number. In the same way, you can order automatic settings through the Megafon website, having previously selected your phone model from the list provided there.

Setting up MMS on your phone manually

In cases where take automatic settings or it was not possible to install them, you will have to enter the settings manually. To do this, create a profile on your phone, indicating the data below:

  • Profile name: you can simply type MMS (you can enter anything);
  • Server address or home page: indicate http://mmsc:8002 (no changes);
  • Proxy: must be “enabled”;
  • Proxy address: enter the numbers 10.10.10.10;
  • Port field for the proxy used: 8080;
  • APN (or the name may be “Access Point”): mms;
  • The user and password fields do not need to be filled in.

As with setting up an Internet profile, some items may have different names depending on the smartphone you are using.

Setting up the Internet on Megafon 3G (4G) modems

Such popular 3G and 4G modems offered by Megafon are usually sold with the settings already made: after purchasing the device, it is connected to any USB port, after which you need to wait for the installation to complete, which starts automatically control program modem After this, everything is ready to go online.

If the data that was present in the automatically created profile was lost, then you can configure the Megafon-modem manually. To do this, you need to create a profile and it states the following:

  • Profile name: specify any name, for example Internet Megafon;
  • Access point or APN: internet;
  • Number to call: dial *99# in the field;
  • The username and password field is not required.

You are now ready to check if you have an Internet connection.


2024 gtavrl.ru.