The MSI laptop does not see the network.

The computer stubbornly does not see wi-fi. I believe that the driver has failed, because... device manager only shows wired connection (1).

I tried to use your instructions for installing the driver, but I can’t find the right one anywhere. I have quite old model laptop MSI MS-16GK, and on the MSI website all drivers are only for newer models. In addition, I can’t figure out whose network adapter I have - in the properties it says Realtek (2)

And the supplier definition is issued by both Realtek and Ralink. On the Ralink website there is nothing even close to suitable, but on the realtek website everything is for XP or Vista, and I have seven. Tell me where to find a suitable one? Or does the driver have nothing to do with it at all?

Answer

Yes, in Device Manager you really don't have a Wi-Fi adapter. Try clicking on the "View" item there and checking the "Show hidden devices". I wonder if something will change. The strange thing is that there are not even unknown devices. To be honest, this is very similar to a breakdown, or disabling the Wi-Fi module itself inside the laptop. If this is the case, then the driver will not help.

Realtek- This is a network card. It has nothing to do with Wi-Fi. You still have it in the device manager and it works.

Ralink is a Wi-Fi adapter that has disappeared from Device Manager. For some reason.

The problem is that WiFi adapter no even how unknown device, so that we can view its properties, find out its VEN and DEV and find drivers.

Your laptop is very similar to the FX610. It is on the MSI website (msi.com/Laptop/support/FX610.html#down-driver&Win7%2064) and there are Wireless LAN drivers for it. There is Atheros Wireless LAN, and msi Wireless Lan_6891. Here you can try it. There is no driver for Ralink.

You can also try programs like DriverPack Solution.

(5 votes, average: 4,20 out of 5)

Very often, laptop users encounter troubles when turning on or setting up Wi-Fi. The procedure itself seems quite simple, but difficulties and snags often arise due to which the laptop does not connect to wi-fi. What to do if the Internet suddenly stops working? To answer this question, here are recommendations on how to deal with troubles when your laptop does not see WiFi.

For turn on wifi, you need to do two simple steps. And these actions will depend on the manufacturer and model of the laptop. First, we present the inclusion options for the most popular manufacturers.

How to enable WiFi on a laptop

• If laptop ASUS does not connect to wifi, you will have to press the key combination FN + F2.
• Same settings on laptop Packard bell And Acer can be called by the keyboard shortcut FN + F3.
• Laptop HP contains a special button with a symbolic antenna on it. But there are models in which wi-fi can be easily turned on by pressing FN + F12. There are also options for HP laptops that have a regular button with an antenna design.
• Chinese manufacturer Lenovo provided an option where the connection is connected using the FN + F5 key combination. But there may also be models that have a special switch for wireless networks.
• Depending on the model on a Samsung laptop, you can connect to a wireless network using the FN, F9, or F12 keys.

In order for a laptop to connect to wi-fi, each manufacturer came up with their own original ways. To view this procedure in detail, you should use the user manual included with the laptop. Almost everyone modern laptop equipped with an FN button. It allows you to perform the most different functions to connect the device with other devices. If, for some reason, such a button is missing, then instead there is a switch or another special button. All of them are easily recognized by their characteristic antenna pattern.

Reboot the router

Before you start troubleshooting the problem of lack of Internet. Reboot your router by turning it off and on. In this case, all router settings are saved.

Checking and setting up drivers

When making settings on a laptop, you need to check whether the necessary drivers for this are present and their functionality. The purpose of this check is that the drivers must be present and involved in this moment. To do this, you will have to enter the “Control Panel”, then select “Network and Internet” and here open the “Network and Sharing Center” item. shared access", in the left column select "Change adapter settings"

A window will open showing two items, Wi-Fi and Ethernet. The screenshot below shows that the laptop is connected to the network via WiFi, and network cable not connected.

If in the adapter wifi recording is not displayed, then this is a clear sign of a driver problem. In addition, a sign of driver failure may be yellow icon with an exclamation point.

There are times when there is no entry for the adapter at all. This means that the drivers are not installed and the system does not see the adapter. Drivers can be installed from the disk that came with the laptop or found on the manufacturer's website.

If a yellow exclamation mark is displayed, click on it with the mouse and select “Enable” in the window that appears.

Also, the reason that wi-fi stopped working may be the power saving mode, which is involved in given time. To disable it you need:

1. enter the “Control Panel”;
2. find the item “Power supply”;
3. select "High performance";

Having dealt with all these simple manipulations, you can put things in order with the wi-fi drivers.

Turn on the wi-fi adapter

To connect the wi-fi adapter we also perform a number of steps. Open the “Control Panel”, then select “Network and Internet” and here open the “Network and Sharing Center” item, in the left column select “Change adapter settings”. There is "Wireless" network connection", which is a wi-fi adapter. In order to connect to wi-fi, you need to open the dialog box with the right mouse button and here use the “Enable” item.

Connecting to the access point

All that's left to do is connect to the access point. But first of all, you should make sure that it is active. In the right corner at the bottom of the screen you need to find the wi-fi shortcut on the taskbar. If you click on it, a dialog box for managing networks will appear. To connect, you need to select a network and then click “Connect”.

There are times when the system is password protected and asks you to enter it. The system will not be able to connect to the access point until the password is entered. In the presence of open point access, the system connects automatically.

The whole process is considered wifi settings on a laptop.

Once you have carried out all these manipulations, you will not have to do them constantly. But there were cases that for some reason wifi reasons won't want to connect. Often solving connection problems comes down to pressing hotkey and inclusion the desired option. Therefore, if the laptop stops connecting to the Internet, the first thing you need to do is check whether it is turned on.

The laptop uses a lot of energy to maintain an Internet connection. Therefore, it often happens that wi-fi stops working due to the use of economy mode.

External obstacles

It is worth remembering that if the Internet suddenly stops working, the reason may not only be present in the laptop. Wifi depends on external factors, because the radio signal can be weakened by environmental influences. Walls, ceilings, floors, and other obstacles weaken the access point signal and the client device signal. The system always displays the signal level in the form of bars. How stronger signal- the more sticks. The signal at 1-2 short points is quite weak and often because of this it is not possible to use the Internet. It happens that the system does not see the signal at all.

If the laptop does not see WiFi, do not be upset, the problem is often very minor. By following the above recommendations, you can easily learn how to correct errors. And the laptop will always be reliably connected to the Internet.

Wifi is turned on on the msi cx500, cx620, cr650, ge70, u124dx, cx623, cr630, x370, ge620dx, cr500, cr61 laptop according to a scheme that is illogical with all the others.

You don't need a lot of intelligence. Essentially, the process can be divided into two conventional stages.

The first step is to determine whether the msi wifi driver is installed on your laptop.

The second is to directly enable it using a keyboard shortcut and an additional button.

Specialist. the button to disable/enable wifi is not available on all msi laptops, so if one is not found, we simply skip this step.

Why does the manufacturer often install additional buttons. Wifi consumes a lot of power, so if you don't use it, work in progress from the battery - it is advisable not to turn it on.

How to check the presence of a wifi driver in an msi laptop

To do this, go to the network adapters section.

We are interested in the line with the word wireless - this is an adapter. Your name may differ from what is shown in the picture below.

Such modules are produced by several manufacturers - accordingly, the names will be different, for example, from Atheros or Broadcom.

Also, the adapter can be disabled, then instead of the “disable” line, as in the figure above, you will see enable.

If the adapter is not detected, then you definitely need to install the driver

Please note that if there is no driver, then in the device manager there will be a line with a yellow exclamation mark - unknown device.

How to turn on Wi-Fi on an MSI laptop using keys and buttons

If the manufacturer of msi laptops has provided a special feature to enable wifi. button, it is usually located near the power button.

Only since new models are constantly coming out can it be elsewhere. Therefore, carefully inspect the case - on the sides, front, near the keyboard.

It is not difficult to detect it - almost always an antenna is drawn on it directly or near it.

As for the keys, this is usually the combination - Fn + F11. Only if it doesn’t work, try other options with the F1……….F12 keys, while holding down the Fn key.

An antenna is also usually drawn on the key. That's all. Turned on wifi - great. No - we describe the problem in the comments. Good luck.

Category: Uncategorized

Many users sooner or later encounter this problem. There may be various reasons why Wi-Fi on a laptop does not work. Perhaps you recently installed a new operating system, purchased new router or reflashed the old one and others.

In general, if you also find yourself in this situation, and you are unable to connect your laptop to a Wi-Fi network, then in this article we will look at several methods that should help you connect your laptop to Wi-Fi.

Let's start with the simplest - reboot the router. To do this, you need to unplug the power supply, wait 10 seconds and plug it back in. Then restart your operating system.

Network diagnostics

Do network diagnostics. Although many are quite skeptical about this advice, but sometimes it can help too. Right-click on the wireless network icon in the tray and select "Diagnosing problems". Windows will scan and if it finds a problem, it will suggest ways to solve it.

If after this, the laptop still does not see Wi-Fi, check Is the Wi-Fi adapter turned on on the laptop?.

Find the wireless network icon on one of the F1-F12 buttons, for me it’s F2. Also, on the button itself, near the power button or touchpad, there should be a light indicator that indicates that Wi-Fi is on. Specifically in my case, if Wi-Fi is turned off, the indicator light is on. To turn it on, press the combination Fn+F2.

You also need to check that the network card is enabled. To do this, right-click on the wireless network icon in the tray and select "Network and Sharing Center".

In the next window click "Change adapter settings".

If you have "Wireless network connection» highlighted in grey, right-click on it and select “Enable”.

After this, the icon should become colored. This indicates that the network adapter is enabled and the laptop can connect to the Wi-Fi network.

Checking drivers

Check drivers network adapter . Click “Start” and write in the search bar "Device Manager" and follow the found link.

Expanding the list "Network adapters". Required adapter will be called something like: model name and “ Wireless Network Adapter" (may be written Wi-Fi).

First you need to make sure it is turned on. Therefore, right-click on it, and if there is an item in the menu "Engage", click on it.

Now pay attention that there is no yellow one near the adapter Exclamation point or a red cross. If you have it as in the figure below, then everything is fine with the installed drivers. If you have one of the mentioned signs (in the picture I indicated with an arrow what it might look like), you need to install or update the drivers.

If your laptop came with a disk with drivers for installed devices, use it and reinstall the driver. If this does not help and the laptop still cannot connect to Wi-Fi, go to the official website of your laptop manufacturer, download the drivers for the network adapter from there and install them.

You can read about installing drivers in the article:.

Also, to update or install missing drivers, you can use the free Driver Pack Solution program.

Checking the WLAN AutoConfig Service

This service is responsible for wireless network adapters, and if it is not running, the adapters will be unavailable, and accordingly, the laptop will not be able to connect to Wi-Fi.

Go to the Start menu and write “Services” in the search bar. Let's move on to the relevant point.

Then we look in the list "WLAN AutoConfig Service", right-click on it and, if it is disabled, click “Run”.

Checking router settings

Router settings can go wrong, and not always through the user’s fault. Perhaps it was just password changed network access.

If your wireless network icon is muted and has a yellow star next to it, click on it with the mouse, select the network and try to connect to it, after finding out if the access password has changed. This may be the reason.

Now let's go to the router settings. There is already a detailed article on this topic on the website; by clicking on the link, you can read it.

If, for some reason, they are lost for you, you need to adjust them. In my case, you need to follow the link "Wireless Network Settings Wizard". You may have slightly different menu items, it all depends on the router model, but you need to do the same.

Make sure you check the box "Enable wireless connection".

Also pay attention to the section network information(LAN). You may need to change the settings here according to your provider.

I hope that at least one of the tips helped you solve the question: why the laptop does not connect to Wi-Fi, and now your device is successfully connected to the network.

Rate this article:

(3 ratings, average: 4,67 out of 5)

Webmaster. Higher education with a degree in Information Security. Author of most articles and computer literacy lessons

Related Posts

Discussion: 13 comments

I tried everything to connect to the network after the children stumbled on something on the computer... And this article...... It wasn’t even an article, but a picture that helped solve the problem for a teapot like me.. All I had to do was press two buttons to connect to the F5/Fn router and everything worked….

Answer

Hello, a user’s comment helped me, attach it to the article because I’m probably not the only one, this is what he writes
SALEX 12/03/2017 at 00:00 I tried everything: I have firewood and wi fi is on and in the device manager everything is fine, but the network is gone. Finally I found a way out: “You go into the control panel, find hardware and sound, it has the name “Configure default mobility settings”, go there, a window appears” Windows Mobility Center “, in the Wireless network column you need to activate the “Connect a wireless network” button and a connection with the router will immediately appear. After connecting, enter the password and enjoy. Good luck.”

It’s probably not worth saying that every modern user of computer systems, when buying a laptop, tries to use all its capabilities to the maximum. Among them, one of the most important places is occupied by the convenience of working on the Internet using a wireless module Wi-Fi connections. It would seem that what could be simpler than turning on the wireless network access mode? For some, the question of how to turn on Wi-Fi on a laptop causes quite a lot of difficulties. And that's why.

General principles for enabling Wi-Fi on laptops

Unfortunately, there is no single rule that provides a solution to the problem of how to turn on WiFi on a laptop. The only thing that can be said for sure is a problem associated with the presence of a receiving (transmitting) device in the laptop computer itself.

Not all users know how to determine it, believing that the presence of a network card and its installed driver is already the key to successfully enabling access to wireless connection with a virtual network. It is clear that when purchasing a laptop, you should immediately check the presence of such a module in the hardware configuration itself. Any specialist can tell you if there is such a module on board. As a last resort, you can pay attention to the markings on main panel to the right and left of the touchpad. As a rule, there is a special icon in the form of an antenna with a signal, as well as an indicator that signals that the Wi-Fi network is currently connected.

Old laptop models

With regard to outdated laptop models, we can say that if Wi-Fi module there is simply no such thing, you don’t even have to try to connect to a private virtual network with a specific access point. This configuration simply cannot detect it.

On the other hand, some older models have a special switch on the body, which is responsible for turning on the Wi-Fi module. However, this configuration is becoming a thing of the past. Basically all manufacturers modern models laptops replace such switches by using keyboard shortcuts like Fn+F(...).

This is the most common combination of so-called “hot” keys. True, in different models on modern laptops it can be different.

Modern systems and access point detection

If we talk about modern computer systems, the question of how to enable WiFi on a laptop comes down to only two things. The first is automatic detection virtual network access points (VLAN). The second is to enter a password if the network is secure.

In some cases, you may need to configure access in manual mode. This is especially true for operating systems like Linux or Mac OS X, which, by the nature of their protection and depending on the version, may simply not automatically enable access to the virtual network.

In general, this is correct, however, these systems are the most secure. It’s not that viruses weren’t created for them, they simply don’t work in them. With Windows operating systems the situation is different. On the one hand, they are able to determine available networks and access points automatically. On the other hand, they are the least secure even if the antivirus, firewall or any other function of blocking the penetration of unwanted and spyware, viruses, etc. In this sense, even the firewall itself, configured to the maximum level of security, can block connections to Wi-Fi points of wireless networks (VLANs). In this case, you will either have to disable it or reduce the security level, as well as change the security settings in any Internet browser used by default on the system.

Now you can go directly to how to turn on Wi-Fi on a laptop from different manufacturers. Each of them offers its own shortcut or combination of hotkeys. Describing further actions Regarding how to enable WiFi on a laptop, we will assume that the access point to the wireless network is detected automatically, and you only need to enter the password to access the virtual network.

MSI laptops

How to turn on WiFi on MSI laptop? To do this, the user, regardless of the operating system, will need to use the Fn+F10 key combination.

DELL laptop. How to enable WiFi?

DELL laptops also have own system configuration that allows you to make automatic search access point and connectivity to it. IN in this case you must use the Fn+F2 keys, although in some models this combination may not be active. More on this later.

ASUS laptops

Now let's look at the question of how to enable WiFi on an ASUS laptop. As a rule, for this in almost all models you can use the Fn+F2 key combination. Among other things, you may need to enable the adapter itself in the Control Panel or BIOS.

ACER laptops

Problem related to turning on Wi-Fi on ACER laptop, is also solved quite simply. To do this, use the Fn+F3 keys. However, in some models, say the A-Series, this configuration can be changed.

HP laptops (Hewlett Packard)

Turning on WiFi on an HP laptop is as easy as on any other computer system of its type. The hotkey combination Fn+F12 is used here. As they say, it couldn't be simpler.

SAMSUNG laptops

Finally, let's look at the problem of how to enable WIFi on SAMSUNG laptop any modification. In this case, there are two solutions that directly depend on the model. The fact is that there are two options for enabling a connection to a wireless network: sharing keys Fn+F12 or Fn+F10. It all depends on the laptop model.

If all else fails. Windows Standard Tools

Unfortunately, keyboard shortcuts or buttons for enabling access to Wi-Fi networks do not always work. There can be quite a lot of reasons for this. Without going into technical details, let's focus on the most well-known ones.

First of all, you need to check if the device is present in the BIOS. By default it is enabled. If not, you need to enable it manually. Now important point is to check in Device Manager. Surely there is no need to explain how it is accessed.

Here you need to find the adapter itself. In most cases, it is labeled as Atheros... Wireless, where the "..." represents the model number. Right click mouse, you need to select the adapter itself and by clicking you need to activate the “Enable” line (if the adapter is turned off). Otherwise, if there is no such line, we can assume that the adapter itself is turned off.

In some cases, you may need to access the View menu and select the Show hidden devices command. It is quite possible that in some cases you will even need to update the device driver.

True, you shouldn’t delude yourself. Herself operating system Windows in most cases simply “swears”, saying that the most suitable diver in the system is already installed. Here it is better to use the driver disk that comes with the laptop upon purchase.

Even if this does not help, you should pay attention to some tests of the hardware itself. You can find a lot of tools for this, both in software and in disassembling the laptop manually. You never know, maybe the train has come loose somewhere.

There is one more option worth noting. Sometimes you may even need to restart the Wi-Fi router itself. To do this, you just need to disconnect it from electrical network for about 10 seconds. After this, access to wireless networks The VLAN will be generated automatically.