Setting up MTS Internet: All possible options. Manual Internet setup

Mobile phones are essentially mini radio transmitters that provide high-quality communication without interference or difficulty. This is the core of modern latest technologies, which allow any subscriber to have access to the Internet.

What is GPRS and its capabilities

One of them, the GPRS system, allows clients mobile operators in Russia and Ukraine, transmit messages to each other via internal network and the Internet. Each subscriber is allocated its own channel, which is tuned to the communication channel GPRS systems.

This provides the ability to exchange information; when installing such a system, clients can:

• almost instantly gain access to any information on the Internet;
• connect any gadget to it: smartphone, tablet, laptop;
• pay for actual access to the Internet (exactly the amount of information that was redirected);
• receive transport monitoring data from satellite;
• use GPRS in telemetry systems;
• get safe remote access to databases, workstations, information servers.

How to connect GPRS?

To be able to use mobile GPRS Internet, two conditions must be met:

• you need a mobile phone or modem that supports GPRS technology;
• connect the device (modem) to the computer or establish access directly on the phone.

Information on how to obtain MTS GPRS settings can always be found on the company’s website or in communication stores.

To be able to receive and send MMS messages and access the Internet from your phone, you need to configure your mobile phone. This can be done in two ways: automatic and manual.

Automatic GPRS settings MTS

When you insert a SIM card into your phone, you immediately receive an SMS with Internet settings, which are saved automatically in your mobile device. But if this does not happen, then they need to be ordered in any of the following ways:

• by number 0876;
• by sending an SMS to number 1234 with the text attached;
• through your personal account.

When ordering a service by automatic connection In the SMS message sent to number 1234, you must write the text that you must select from the list below:

• Internet – ability to connect GPRS-Internet settings;
• MMS - connectivity MMS settings;
• WAP - WAP-GPRS connectivity;
• empty message— ability to connect Internet-GPRS and MMS settings;
• CSD - ability to connect WAP-CSD settings.

After receiving SMS with automatic settings, you need to Necessarily save on your phone. After saving the settings and rebooting the phone, you need to make sure the selected settings are correct. parameters-settings MTS GPRS.

Setting up GPRS MTS on your phone manually

Before connecting to the mobile Internet manually, you need to create a profile indicating the APN access point, login and password. The following data is entered into the phone settings:

• profile name - MTS Internet;
• data channel - GPRS;
• APN access point - internet.mts.ru;
• Username;
• password.

The next steps to connect depend on the operating system installed on your phone. All changes are saved and the phone reboots.

Setting up through your personal account

You can order an Internet connection through your Personal Account on the MTS website. To do this, you need to enter information about the telephone model, the installed operating system, and the subscriber number.

If none of the methods work, then you should contact a communication salon.

Accessible Internet without settings

Not everyone knows that the operator has a “Access without settings” service, using which you can gain access to the Network. This is possible even if the settings are incorrect or missing altogether.

Use this service on permanent basis the operator does not recommend it, so you need to install everything as soon as possible necessary settings on mobile device.

This service is very convenient when access to the Internet is urgently needed, but you cannot get settings. In addition, it connects for free and without subscription fee. As you can see, setting up GPRS access to the MTS Internet network is quite simple, and automatic method takes no more than 1 minute, very light and convenient.

There are several options for setting up MTS Internet, done automatically or manual mode. Detailed description These procedures will help even an inexperienced user to easily adjust Internet access.

Proper configuration of 3G Internet allows you to get correct access to the Network from any device, be it a phone, modem or router. Typically, all installations occur automatically at the moment of registering data on the network. If this does not happen, then you can use one of several options and configure everything yourself.

Automatic Internet setup MTS

Installation new SIM card- This the simplest way set all parameters on the device to automatic mode without your participation. But unfortunately, this procedure is not always successful. In particular, this applies to outdated models. In this case, to gain access to the Network, you can use two methods to automatically configure mobile Internet: using the official website or sending SMS from your phone.

Automatic installation of mobile Internet on the MTS website

To open access to the Network on your phone, you need to go to the company’s official website in the “Internet and TV” section and click the tab "Help and Service". After this the page will open www.mts.ru/mobil_inet_and_tv/help/settings/settings_phone, which will contain information about the network installation.

There is a window here with detailed description actions to obtain basic parameters. To do this you need to take several steps:

1. Enter your phone number in the special window. will be sent to it automatic parameters for installation.
2. Before sending, you must pass the “Anti-robot” check, which is presented in the form of a group of images.

After confirming the request, the system should send the parameters to the phone within a few minutes. You need to save them and then reboot your phone. Only after this will they come into force.

Automatic installation of mobile Internet using SMS notifications

Using this method, you can access the Internet using your phone in just one action. To do this, you need to send an empty message to number 1234. In response, the service will send an SMS with data for access to the Network. In addition, the messages contain additional information for installing MMS.

Manual setting

If automatic 3G Internet setup does not work, you can try to do it manually. To do this, you must enter manually in the device menu standard parameters:

• In the “profile name” column enter – MTS Internet. In principle, you can write any word you like here;
• indicate internet.mts.ru as APN or access point;
• transmission channel – GPRS;
• user (name) – mts;
• The current password is mts.

The data listed is the same for everyone operating systems. The only difference is the way they are entered.

Important:Depending on the device model, the menu interface may differ slightly. Therefore, the configuration paths described below are only approximate.

Operating system iOS

As a rule, devices with this operating system already initially have correct access to the Network. Therefore, manual configuration of the MTS mobile Internet may be necessary if the data suddenly disappears. In this case, you need to perform several actions:

• you need to open the “Settings” section;
• stop on the “Basic” tab;
• open the column "Cellular Data" and onwards « Cellular network data transmission";
• Next, enter the main parameters.

After entering the data, be sure to save it.

Android operating system

In order to enter manual settings on Android, you must follow the following instructions:

• enter the main menu;
• then open the tab « Wireless connection» , where we check the box in the item "Mobile Internet";
• after that we enter "Mobile networks" and enter the standard parameters for installing the Internet on the phone.

If at point "Mobile networks" there is no designated profile, you need to create it manually by clicking the window "Create a new connection point". Here we enter the same parameters as indicated above: name, APN, password, login. We leave the following data the same. On some models in the window "Authentication Type" instead of installing "Not installed" should be set to "No".

Windows Phone System

Manual settings of 3G Internet on Windows are carried out in several steps:

1. in the list of the main menu we find the corresponding tab;
2. open the window here "Data transfer";
3. select an item “Add an Internet access point”, where in the APN tab we indicate the standard parameters.

Important:for getting detailed instructions After installing the Internet, the company user can call service number 0890. When contacting from a landline phone or from a number of another operator, you should use the phone number 8 800 250 0890.

For convenient, comfortable and full use smartphone requires internet settings. To have access to the network from a smartphone, as well as to be able to fully use the services mms messages, you need to configure the device. To connect similar settings There are a couple of methods:

1. Manual installation;
2. In automatic mode;

Below are the methods that allow you to receive on your smartphone with the MTS operator automatic settings, and manual parameters to set Internet connection settings.

To order the necessary automatic installations you should send a message from your SIM card to phone number 1234. There is no need to write anything in the body of the letter. MTS also allows users not to send a message, but simply call the short number 0876. Both after one method and after the other, a message will be sent to your phone containing settings for the phone. Next, they should be saved. The phone, as a rule, offers to install and save them. When all data is saved, you should restart your mobile. If your phone has two SIM cards, then you need to make sure in the settings that MTS GPRS is selected. After this, Internet access will be open.

If some installations have already been made on the phone, then you can order from MTS only what is needed. To do this, when ordering, you need to select what exactly you are interested in by sending a message to short number 1234 , but in the body of the letter you need to write what you need:

1. Internet – will allow you to access the network;
2. MMS – settings will be sent only for receiving and sending mms messages;
3. WAP – WAP-GPRS settings;
4. An empty message allows you to save and set all the necessary settings.

In addition to ordering settings via phone, MTS also has the opportunity to make automatic settings using their official website or simply follow the link mts.ru/help/settings/settings_phone.

The site will provide information that all new phones must already have settings, but if they do not, then you need to enter your phone number in the appropriate box. After which you need to pass a short test, so the site eliminates the possibility of hacking. Next, a message with Internet settings should be delivered to the device. If they do not come, then it is already necessary to use manual mode.

You can also use other services to send to your phone necessary settings. Eg, this procedure allows you to make a service. For example, this procedure can be done by the service mobile.yandex.ru. All you need to do is indicate the MTS operator, then write the phone number in the required column and indicate which phone (model) will be used. In a couple of minutes you should receive settings for using the network. The SMS message will be password protected, and the key for the message will be written on the site.

Another request method for automatic installations via the Internet assistant from MTS. In addition, it allows you to change tariffs and other subscriptions. In the assistant, you will need to select which way you want to send the settings, and then follow the established instructions.

Manual installation mode

If there is no way to get the installation, for some reason, then it makes sense to install everything manually. In order to perform a similar procedure, you need to go into the device and open “Settings”. Next, a list of items will appear from which we select an Internet connection. Depending on the device model, such an item may have different names, the main thing is that it is responsible for connecting to the network. After this item is opened, you need to enter the following data yourself:

1. Name: MTS Internet;
2. Data channel: GPRS;
3. Access point: inetrnet.mts.ru;
4. Name: mts;
5. Password: mts

To access the network, establishing a WAP connection is not recommended today, since the tariffs are significantly higher than GPRS. This information You can check at the MTS communication salon or with the operator

After the Internet is installed, you need to check if everything is working, and also make sure that there is traffic on the phone and a special subscription has been installed that allows you to use the network.

Modern technologies allow a person to be completely mobile, and wireless Internet– have access to literally any information. GPRS technology today is considered the most popular around the world and provides access to fundamentally new services that were previously unavailable. So, you can access the Internet at any time at a speed that suits you and at the same time enjoy favorable rates.

What is GPRS service

The abbreviation GPRS itself translates as General Packet Radio Service, which means the transmission of data packets using cellular communications. The concept of the technology is to provide permanent connection access the Internet from your phone or via modem. That is why GPRS can be used by anyone who has a modern phone, smartphone, laptop, tablet, organizer or computer (using a flash drive modem). Installing GPRS allows you to surf the Internet, download and exchange information, watch movies and listen to music online, in general, use unlimited resources.

The organization of data transmission on the network occurs according to the following scheme: a person receives his personal channel, which the system uses for voice transmission via modem. The modem, in turn, is built into mobile terminal and sends data through a dedicated channel. GPRS makes this channel available to a specific subscriber and supports transmission within a particular cellular network (MTS, Beeline, Megafon, etc.).

GPRS technology has the following advantages:

• providing instant access to services (the subscriber does not need to call the provider);
• receiving full access to the Internet, as if you were using a regular wired connection;
• the ability to remotely work with WAP sites from a tablet, smartphone or laptop;
• favorable pricing (you only pay for the information downloaded or sent, and not for the time spent online);
• high speed (maximum 171.2 kbit/s).

How to connect GPRS

It's obvious that GPRS connection is comprehensively beneficial for the subscriber, especially if he has at his disposal unlimited Internet. But before considering the connection diagram, you should understand the principle of operation. So, to use the ability to transmit data using this technology, you need special terminators that can support GPRS mode.

There are 3 types of such terminals:

1. Class A – simultaneously voice connection and GPRS operation.
2. Class B – represents everything Cell phones and provides a voice connection with packet data, but not at the same time. This means that the subscriber will not be able to simultaneously communicate on the phone and transfer data (send music, watch movies, etc.).
3. Class C – represented by CF, PCMCIA cards, as well as USB adapters(modems-flash drives). Allows packet data, but does not support voice connection. Modern laptops and Ultrabooks are sold with built-in cards, but they can be purchased separately, just like a USB adapter.

The above information gives a superficial understanding of the principles of GPRS operation and allows you to choose the best option.

To activate the GPRS service on your phone, you need to contact your operator (MTS, Beeline, Tele2). The operator number can be found on the official website. Packet data transmission technology is only possible for modern phones, supporting the corresponding settings.

Another nice thing about working with technology is that you no longer need cables and adapters to connect your phone to a computer - you can easily transfer data over the Internet.

Important: the data transfer speed is affected by several circumstances: network congestion, modern equipment. And if outdated equipment can be updated, then if for work GPRS operator allocated an insufficient number of timeslots, the speed will always be insufficiently high.

How to disable GPRS

Each mobile operating system automatically connects to the Internet, where it searches for and installs new updates for applications and performs OS maintenance. For this reason, you should first check the cost of roaming abroad or even in another area and only then decide whether it is profitable to use GPRS in your case. This question is especially relevant for corporate clients, which are calculated retroactively.

If tariff plan has ceased to be profitable, or you want to disable GPRS for any other reason, this is quite easy to do. Let's consider a step-by-step disabling of the technology using the example of a smartphone based on Android OS.

Disabling GPRS occurs in several stages:

This way you can disconnect from a specific access point of a telecom operator (MTS, Beeline, Megafon, etc.). If you need to turn off data transfer, return to the previous “Access Points” menu and uncheck the box next to “Mobile Data”.

How to set up GPRS on your phone

Today, all subscribers of leading mobile cellular operators can use GPRS: MTS, Megafon, Beeline, Tele2 and a number of smaller operators.

Below will be given step-by-step instruction By GPRS settings through Moscow MTS. These settings are suitable for computers (laptops), as well as smartphones, modems and any other portable equipment.

Setting up GPRS on a phone with MTS is as follows:

If after performing all the above steps GPRS service does not work, please contact help desk MTS (Beeline, Megafon, Tele2, etc.). Each individual region or region has its own settings, which can be found over the phone or on the official website of the mobile operator.

MTS is the largest operator in Russia. There is no place where people have not heard about him. One of the most popular services of the company is mobile access to the Internet anywhere in the coverage area. More and more subscribers are becoming active users of the service, which is facilitated by the excellent quality of the Internet and the constantly growing coverage area.

Mobile operators are trying to create competition for Internet providers

But in order to start using global network, you need to configure the service in the device menu. In most cases, the configurations are already made by the phone, but sometimes they have to be made manually. This scares many, but there is nothing complicated here. Read how to set up MTS mobile internet on Android and other mobile platforms.

Automatic settings

The operating company is doing its best to ease the efforts of customers by automating the process as much as possible. One of these features is automatic settings. How can I get them?

• From your phone or tablet, if it supports this function, send a message containing “Internet” to 1234.
• On the MTS website page http://www.mts.ru/mobil_inet_and_tv/help/settings/settings_phone/ you can order settings by finding your model and entering the phone number. Settings can be obtained for most known models. If yours is not on the list, then follow the instructions on the page.

• An excellent opportunity to request parameters - use Personal account. If you already use it, then in the “Settings” section, order them for yourself in a convenient way. If not, register. By following the link https://login.mts.ru/amserver/UI/Login, select “Receive password via SMS”, add the number and enter the received password in the appropriate field.

In all three cases, a service message will be delivered, which you just need to open on your phone. The settings are saved and activated independently. Only in some cases will you have to do everything manually.

Manual setting

Regardless of the platform, when creating an access point, you must specify the following:

Name - MTS internet
APN - internet.mts.ru
Login - mts
Password - mts.

The only thing that will differ is the sequence of actions on each platform.

Android

On your phone, go to Settings - Wireless & networks - More - Mobile network- Access points. Create a new one and save it on your Android phone.

Be sure to turn on data transfer.

iOS

iPhone owners don't have to suffer for long either. In new iOS versions go to Settings - cellular- Cellular data - Cellular data network.

Windows Phone 8

Although Microsoft is gradually losing mobile market, setting up the MTS Internet is no more difficult: Settings - Access point - “+” to create new point. After registering the parameters, enable it and data transfer.

Mobile modem or router

It is best to buy such a device in company salon communications. When you connect the modem for the first time, the proprietary utility starts. All parameters will be entered automatically after choosing a tariff. You can set up the router through its web interface. All necessary information for access is indicated in the instructions.

Using your phone as a modem

If your phone is Android or iOS, you only need to activate the item in the settings.

Android: Settings - Wireless networks - More - Modem mode.

iPhone: Settings - Cellular - Modem mode.

Can be used in mode wireless point and distribute the Internet via Wi-Fi, or in USB modem mode. In the first case, you will need to come up with a password wireless network. In the second case, the computer recognizes the connection as a connection via local network. No additional movements are required.

In conclusion

Do you understand how to configure Mobile Internet MTS on Android phone and other platforms? First try to order automatic installations, and only if the attempt fails, do everything manually.