The speaker on the iPhone got wet, what should I do? Apple service center addresses

Surely many of you have accidentally dropped your mobile device in water. For example, the iPhone fell into a bathtub, sink, river, got wet in the rain, etc. In principle, the situations are common. Everything, as they say, depends on the human factor. But sometimes, even the most thrifty owners have something happen to their phones. Yes, the situation is unpleasant. Some will think that they can go buy new phone. But in vain, because today there are many ways to bring the device back to life.

Of course, when an iPod or iPhone gets wet, the owner of the phone doesn’t even know what to do next. It is worth noting that Repair iPhone is still possible. Of course, you can contact specialists for professional repairs. But in this case, there is no guarantee that repairing the mobile device will be cheap. Only those devices and equipment whose warranty has not yet expired are repaired free of charge. Therefore, it is better to entrust the work of such a complex device to professionals.

Still, don't be upset. After all, there are several simple ways get your device working again. So, your iPhone is wet, what should you do?

• iPod or iPhone is better do not turn it on immediately, as in this case the device may receive even more damage, which will ultimately lead to its death;
• The device must be dried from moisture. To do this, you need to wipe it, sometimes shake it. In some cases, you can, of course, use such a household and most common appliance as a hair dryer, but still do it carefully. It must be remembered that it is better not to overheat complex electronic devices, as this will negatively affect their further operation. If you use a low temperature when drying with a hairdryer and take frequent breaks, then the iPod or iPhone will “come to life” and will work in its own way. normal mode;
• An excellent way out of the situation would be bags with silicone balls, as they are able to perfectly absorb moisture. To ensure that the device dries quickly, simply place it in a plastic container or bag filled with bags of silicone beads or silica gel. So, in a maximum of two days, the iPod or iPhone will be completely dry. It is worth noting that the device should not be turned on under any circumstances during such drying;
• Rice can also help dry out your iPod or iPhone quickly. Drying time is at least a day. This method is proven and safe.

We can conclude that there is no need to create panic when your iPhone or iPod gets wet. The main thing is not to turn on the device until it is dry, otherwise you can immediately go buy a new device. There are many ways to dry a device. It is better, of course, to choose one that will not harm the device.

You do not know fear, if you haven’t looked into the eyes of those who dropped the iPhone into the water.

This can happen to anyone. And always at the wrong time. The situations are different, the result is the same: smartphone survives last days , hours, and sometimes even minutes. Now what happens next depends only on your actions. The line between a pile of expensive metal and a fully functional smartphone is thin, crossing out urban legends.

What happens to the iPhone in its last hours, how to turn back time and why traditional methods are doubly dangerous- further in our article, based on the experience of hundreds of thousands of unhappy iPhone and iPad owners.

Water is not a toy for iPhone

You need to know the enemy by sight. Especially one without which human life is impossible. Natural water, no matter where it comes from, is the worst enemy of electronics. Ever wondered why this happens? Contrary to what some people believe, the liquid itself does not stop the electronics from working and doing their job. It's about water, or more precisely, its chemical composition.

The water you drink, bathe in, and wash your hands with is much more complex than it appears at first glance. Bottled, flowing, spring, sea, river water - water available to humans, occurring in nature or processed for drinking, contains microscopic salt ions and minerals. You see them without a microscope almost every day. For example, in the form traces remaining on the window after rain. Or on the glass above the sink.

Salts and minerals – an important part drinking water and one of the reasons why a person simply must drink in order to survive. It is the mineral composition that makes us prefer one bottled water manufacturer to another: the ratio of minerals and salts in the liquid determines it taste. All this is not in distilled water - and therefore it is not recommended for a person to drink it. With any liquid, the same minerals and salts are washed out of the body, and if the usual drinking water makes up for the loss, then the “dead” one harms the health of the body.

Why do you need distilled water at all? Salts and minerals present in ordinary natural water tend to precipitate and accumulate with time. Moreover, they are all chemically active elements capable of oxidation reactions– i.e. upon contact with oxygen, damage the structure of metal and other materials. This is why distilled water, in particular, is recommended for use with steam irons. Good for electronics and metal, bad for humans.

Do you know another property of ions in water? They're not bad conduct electricity. Some naturally have a positive charge, while others have a negative charge. Hence the legendary electrical conductivity of ordinary, natural water.

An electronic device that gets into natural water and continues to work comes into close, simultaneous contact with ions of negative and positive charges. The flow from the energy source in the device instantly closes on itself. This is called "short circuit". It often causes irreparable damage all components of the device that conduct electricity in this circuit.

Dropping a working smartphone, tablet, computer, or anything else into the water electronic device, you arrange an instant local Apocalypse inside the case. The more significant the contact of internal components with water, the more serious the consequences will be. Of course, it’s better never to do this - but life dictates its own rules.

I dropped my iPhone in the water. What to do?

Immediately remove the smartphone from the water and turn it off if it does not turn off on its own. If you don't have an iPhone, just as quickly open the case cover and take out the battery.

You can exhale, but you cannot relax. In these seconds, the further fate of the device was decided. A switched-on device under water could experience a powerful short circuit, and if water gets inside the case, these short circuits can (and will) be repeated until you turn off the power completely. Since the battery cannot be removed from the iPhone, your situation remains extremely difficult. Even when turned off, there remains a source of energy inside, which does not need to receive commands from you in order to exchange impulses with water and fry a couple of microcircuits on motherboard. Hours and minutes are still counting.

Wipe thoroughly device, removing all visible water. If you don't own necessary tools for parsing iPhone cases, cancel things without delay go to the service center. And not the one in official stores operators and hypermarkets. Go there - Right way say goodbye forever to the device, the data on it and, of course, money.

You need to go directly to repairmen. On the way, make sure that your smartphone does not turn back on without your knowledge. In no case don't wrap put it in towels and in general in any fabric: this way you will increase the humidity inside the case, which will increase the chances of saying goodbye to the gadget several times. Feet in hand - and forward.

Having handed over the device to qualified specialists - not indifferent consultants of retail stores, but to the repairmen themselves - you can breathe out and wait for the call. And you'll have to wait at least until tomorrow. Maybe a week. Every case unique: someone is lucky and the water does not penetrate to the motherboard. In such cases, thorough cleaning and drying is sufficient. And for someone, some microprocessor on the board will die, and then the repair time will stretch for days, sometimes weeks due to the search necessary components for replacement.

Don't rush to get upset. The most important thing is that in the current situation you everything was done correctly. But what if you don't have the opportunity immediately go to service? Suddenly you have to wait until tomorrow? From now on, the fantasy of home-grown geniuses can take over you. There are many things on the Internet that are not recommended in such cases. They usually don’t think with their heads at all.

Traditional medicine and deceptive confidence

Various forums are full of advice on how to "revive" a sunken iPhone. On the surface there are dozens of stories about device owners who have done several simple procedures- and voila, a miracle happened, and from then on everyone lived happily ever after. Let's not deny: in some cases people really lucky. But relying on “maybe” is the last thing you want to do when it comes to a thousand-dollar smartphone.

So, you turned it off and wiped the device dry with shaking hands. In no case don't use a hairdryer: hot air will speed up the evaporation of the liquid, but can easily damage internal components and provoke accelerated destruction of contacts on the board. If you have a suitable screwdriver and you you know What are you doing, you can try to disassemble the gadget completely. But what to do next?

Traditional medicine has come up with many ways to help the “drowned,” but one of them is many times more popular than all the others. Network wisdom says: if put the iPhone in a container with rice, in the morning it will become dry even inside and will work as before. As usual with such recipes, partly this helpful advice. And partly very harmful - because deceptive.

The method is as follows. Immediately after the incident, you turn off the device and wipe it from moisture. You pour as much rice as possible into a plastic container and put your iPhone inside. Including in disassembled form. The real “wise men” add here that the container or bag must be closed tightly. Keep the device inside not more 24 hours. After this time, you will need to thoroughly clean the headphone and Lightning connectors from rice crumbs. At this point the procedure is supposedly completed.

What in reality happens in this container? Let's look at a case where an iPhone is placed there, barely touching the water. If nothing really gets inside the case, after a day you remove a very live, fully functional device. Rice absorbs remaining moisture, including microscopic droplets remaining in shallow openings in the housing. In particularly successful cases, this may indeed be sufficient.

I did not just mention that rice is a very deceptive measure of salvation. It can and will absorb water. Only water is not so bad. They pose a much greater danger minerals and salts, inevitably dissolved in it. The liquid, having evaporated from the circuit boards and cables of the iPhone, will leave behind crystals that are invisible to naked eye, but extremely dangerous for electronics.

Deposits of salts and minerals remaining on the board, upon contact with oxygen, begin to oxidize. The process is accompanied by slow erosion of sensitive, vital parts in the device. The consequences for the user can be very different: from strange glitches that one would like to attribute to firmware problems, to real problems, such as a suddenly failing wireless module or loss of screen sensitivity with false positives.

Do you think evil repairmen are trying to intimidate you? Unfortunately, you are not the first and not the last who then comes to them after rice with a dead “pipe”. Having believed in the healing qualities of cereals, people continue to use smartphones, not realizing that they are carrying a device in their pocket that is condemned to death. One day something will fail and everyone will be offended. Even the service center, whose specialists will have to do several times more work to replace contacts and chips.

What happens to an iPhone after it gets into water?

During my visit to the service center, I briefly touched on the topic of “drowned people”. Further communication with one of the masters led to the writing of a separate article, which you are reading right now. Together with Alexander, I invite you to consider in detail, what happens to the internal components of the iPhone after immersion in water. And not in 15 minutes, but over several days, or even weeks.

Every day, iPhones with various breakdowns are brought to the service. Interestingly, some of them are actually caused by long-term contact of the device with water. The owner may have already forgotten about what happened or believed in a miraculous healing. And all this time, slowly and surely, what was happening inside rotting very important electronic components. Nobody likes unfounded statements, so let's get down to business.

All smartphones that came into service due to contact with water are treated as an emergency are sorting it out down to the last cable and screw. Each spare part that has traces of water is blown through with a pressurized air stream, and then inspected in detail for more serious damage. Some of them cannot be restored: for example, a camera module whose seal has been broken. Be you at least a hundred times a master with capital letters, the spare part will have to be replaced with a new one.

Usually, serious cases Water getting inside the case leaves marks on the motherboard. From this moment on, Russian roulette begins - both for the repairman and for the owner of the device. It’s one thing when, after contact with water, you can limit yourself to replacing the speaker or microphone, and quite another when the motherboard is in danger of decomposing. Anyone who has ever experienced iPhone breakdowns knows: the motherboard is the most expensive part Apple smartphone , and getting a new one is not only difficult, but also expensive- almost the same as going to the store and buying a new device.

Helps children with difficult and tedious work special equipment. For example, this powerful soldering station. It is she (and straight arms, of course) that allows you to lift gadgets with rotten chips and contacts “from your knees.”

More than one hundred iPhones and iPads came to life at the tip of this soldering machine. During the shooting, I noticed: Alexander’s hands absolutely motionless, no tremor. I wanted to joke about this topic then, but then the microscope was inappropriately moved. The childish love for such things instantly knocked all other thoughts out of my head. The male (and largest) half of the site’s readers will understand me.

Microscope not intended for a research biologist: after all, the scale of electronics is a little larger. This tool allows you to very quickly find problem areas on microchips and circuit boards. Having suppressed the desire to put absolutely all the objects in the room there, I suggested looking at the “motherboard” of the iPhone, which had completely collided with water. To begin with, a more or less living copy was found belonging to the iPhone 5 from the year before last.

So, at first glance, everything is in perfect order with the board. This misconception is the main problem with drowned iPhones: damage from water and oxidation may be minimal, but the effect will be critical. First and absolutely necessary action, which awaits all wet devices - removal of salts and minerals, as well as from oxidizing metal.

Have you thought about seeing an unusual unit? Everything is much simpler. Experience shows that for this purpose it is quite enough to use a toothbrush with soft bristles. Naturally, this is not done dry: a special solution Contact Cleaner, applied to the brush, removes traces of oxidation and salt residues from the board.

As soon as the solution dries, it’s time damage assessment. There is no way to do this without a microscope, especially during subsequent soldering. Together with Alexander, I looked inside with the camera lens. It turned out quite normally, just like a macro photo.

Do you see the water? I don't see it either. In fact, she was no longer there. But salts and minerals managed split one of the connectors on the motherboard into which the cable from the display is attached. What could be the danger of such a situation? Oddly enough, the device works fine from the outside. But this impression is wrong.

There were problems there some. Firstly, the iPhone did not want to connect to the network. Probably one of the chips associated with wireless communication, was damaged. And secondly, touch screen worked very poorly. Every now and then false clicks were triggered, but real ones were not registered at all. Working with a smartphone was extremely problematic. But the owner of this particular device got off well. There are worse situations.

Do you think that iPhone was unlucky? "This Khan"– Alexander confirms sadly, guessing my thoughts. Theoretically, it is possible to restore such a board, but the amount of work involved is simply unimaginable. In addition to powerful multi-stage cleaning, this will require check absolutely all chips, right down to the little ones. The owner of this gadget either threw the smartphone at washing machine and left it there overnight, or simply took it out and scored on it, remembering it a couple of days later.

This is what an iPhone looks like for those who believe in rice, hair dryers and others Tales of the Vienna Woods. And for those who postpone a trip to the service until better times.

Returning to the still breathing specimen, I noticed several other signs of contact with the liquid. "That's not the worst part"- the master seems to be encouraging. Returning to the microscope, I look at reverse side, where the wireless communication chips are located.

If an insect's leg is torn off, it may still live. But not for long. And painful. This iPhone feels about the same way, the contacts of one of the chips in which rotted by themselves due to the owner’s negligence. I don’t know about you, but for me personally, watching all this was very sad. Perhaps someone didn’t have time to deliver it earlier. Or I just didn't know. Or maybe they read great ones and didn’t read them at all harmful advice on the Internet and decided that “first aid” would be enough.

This is what a typical drowned man looks like, who was lucky. Spots under the screen, broken connection, wildly glitchy touchscreen. The most annoying thing is that in most cases all this could have been avoided.

The moral of this story is this. Did you drown your iPhone? Go ahead to the service. Fast! And leave the rice on breakfast.

Forewarned - forearmed

You are probably in a panic right now and don’t know what to do as your iPhone fell into water(toilet, bathroom, puddle... it's not that important)? The most correct decision in this situation would be to visit a service center where your iPhone will be disassembled and drops of water will be removed from all hard-to-reach places ( average price behind this service in Moscow 1000 rubles). If for some reason you cannot take your phone to a workshop, try the method described below. Act as quickly as possible using the following steps:

STEP 1 Never turn on your iPhone (iPod, iPad)
STEP 2 Use a napkin to wipe off any remaining water and soak it from the charging/headphone socket
STEP 3 Don't try to dry your phone with a hairdryer
STEP 4 Place regular uncooked rice (not cooked!!!) into a bag or bowl.
STEP 5 Place the phone in it, release the air and seal the bag tightly
STEP 6 Do not open for at least 24 hours.

Now that you have done all this, you can exhale and read the article to the end.

ATTENTION!!! The steps above in no way guarantee that moisture will be removed from the interior of your phone. You should be well aware that in order to “completely dry” a wet iPhone, at a minimum, you need to disassemble it and examine the internal components. Possibly under a microscope. Even if the phone (seems to be) working normally, there may be moisture left somewhere inside, which can lead to corrosion over time. The consequences can be dire. You decide!

Background

Sometimes, waking up early in the morning, I have a desire to run along the river along forest paths to some invigorating music. I’m trying to keep myself in shape, you know, plus my brain thinks better and my mood lifts. When I go jogging I usually take iPod Nano— it is lightweight and not so noticeable in your shorts pocket. It was like that that time too. An easy 3km sprint, warm-up, swimming in the river... When I was about to go ashore and reached for a T-shirt... I heard a “gurgle” - my iPod went to feed the fish. The depth was only knee-deep, but this does not change the essence.

Pulling my gadget out of the water, I began to say goodbye to it. He served me for a long time and never let me down. And I’m throwing him into the abyss for this. And my soul felt so bad that I decided to try by any means to revive my little helper. I ran home, wiped the player dry, put it in a glass bowl and covered it “heavily” with the most ordinary rice. This method was suggested to me by a friend whose phone was lying on the windowsill in condensation dripping from the glass.

Do not try to turn on your device

It seems obvious to the ear that the fallen one should be included in water iPhone not worth it at all. But my hands are itching to press a button and check if my favorite phone or player is working. We need to overcome ourselves. By turning on a wet device, you only increase the risk of completely burning it.

How to dry an iPhone that fell into water

Once your device is on dry land, you need to get rid of all the water if possible. Any method is good for this - even light shaking can help the water come out.

Wipe off water from your phone

This point also seems logical and this is the first thing that each of us will do. But at this stage, you need to carefully examine the phone and soak up water from all accessible places. If necessary, use a cocktail straw - it is convenient for sucking water out of cracks and holes.

Be careful with the hairdryer

I've heard stories of someone "water curing" their iPhone using a hairdryer at home. Some are lucky, some are not. If you decide to use this device, I want to warn you a little. Use a hair dryer minimum level temperature. Overheating the device can fry sensitive components on the board. Well, naturally, the flow of air can drive water even deeper into the phone and short-circuit what is not yet closed.

“Rescue” pack of rice

All that now remains to be done is to fill the bathed device with raw (not to be confused with wet) rice. Rice acts in the same way as cilica gel packets and is a very good moisture absorber.

Leave your device in the bag/bowl of rice for at least 24 hours

After removing the iPhone from the rice, wipe it from rice dust and try to turn it on. If it does not turn on, connect to charger. If the phone still shows no signs of life, leave it to charge for 5-10 minutes. Perhaps the battery could not withstand the short circuit and was completely discharged. Otherwise, contact the service center.

Conclusion

Now you know what to do if your iPhone falls into water. My iPod Nano survived and still serves me today. There is no need to immediately despair and run out to buy a new phone or player. Simply leave your device covered in rice for 24 hours.

No matter how sad it may sound, but wet iPhone already will never be the same again. Even if you got rid of the moisture and successfully revived it, sooner or later you will encounter glitches or lags that did not exist before. Subsequently, part of the screen may fail, the battery will hold less charge, the buttons may not respond the first time you press them, the sound of the speaker may change, etc.

If you or one of your friends decides to purchase a used iPhone, then be sure to check the moisture sensors built into the case. Where to find them - .

To ensure your Apples are always healthy, don’t bathe them! Good luck!

Water damage is common problem mobile devices and cell phones. If a mobile device is exposed to water, it may cause a significant decrease in its value and void any manufacturer's warranty. Majority mobile phones, in including iPhone, have some kind of Liquid damage indicator (LDI).

iPhone 3G, 3GS, 4, 4S have indicators both in the headphone jack and on the bottom of the sync cable connector. iPhone 5 has one water damage indicator on the inside of the nano SIM card slot. It is located on the right side of the device.

The best way to see the indicator is to point a flashlight into the socket and look through magnifying glass. If iPhone has been immersed in liquid, this indicator will be activated and will appear red or pink color. If the indicator works, the repair will most likely not be covered under warranty.

For getting additional information, look on the website technical support Apple, and what to do if your touchscreen phone falls into water, you can read in the article at the link. Here we will give a few main points.

What to do if your iPhone gets wet:

• Turn off your phone immediately. Do not turn it on, charge it, or connect it to a computer or other device.
• Wipe your phone as best you can with a soft cloth.
• Remove the SIM card and remove any moisture from the headphone and charging jack.
• Then place the phone in silica gel or raw rice and leave it on it for 48 hours in a dry place. The rice will absorb the moisture that remains in the phone.

After 48 hours have passed, take out your phone, insert the SIM card, and try to turn it on. With a little luck you can save your iPhone from drowning.

When purchasing a used phone, pay attention to the color of the LDI indicator, which indicates that the device may have gotten wet. If it is missing, an indirect sign of the phone being drowned may be traces of oxidation on the open metal areas under the back cover.

Additional materials:

• New iPhone Apple is not eligible for any design awards. He looks exactly like old model. And the reaction to its debut was mixed, partly because it was […]
• Despite some disappointments that befell fans since iPhone release 4S, instead of the expected fifth generation of smartphones from Apple, the gadget, according to a report by "The Next Web", could quickly […]
• Apple is such a cunning company that loves to put some parameter in the specification and claim and claim that it is best indicator on the market in this area. Majority […]
• According to a Vietnamese source who works with an Apple component supplier, the iPhone 5S will likely have a 12-megapixel camera with improved […]

A gadget worth a thousand dollars falling into water is a real tragedy for the owner. He should immediately have before his eyes an impressive bill, which will be presented by the repairmen after the “reanimation” of the device, if it turns out to be possible. In such a situation, greed often takes precedence over common sense, and then the owner of the “drowned” iPhone begins to “dig” on the Internet, trying to find “folk” means of removing moisture.

Claim that effective ways There is no “traditional treatment”, of course, not a single qualified specialist will undertake it. At the same time, every technician will confirm that most of the advice found on the Internet is given by amateurs and can only push the iPhone to “death.” There is a list of mandatory actions that the owner of a “flooded” iPhone must perform; Going beyond this list and striving to take the initiative leads to huge risks.

For many users, it will probably be a revelation that water is far from the most dangerous liquid for mobile devices. Salts and minerals contained in water have a negative effect on equipment.. They are chemically active substances and during an oxidation reaction - that is, when they come into contact with oxygen - they damage the structure of the metal.

The danger of a liquid for equipment can be judged by the pH indicator - acidity level(or pH value). The lower the pH, the more dangerous the environment. Water is an absolutely neutral liquid - its pH value is 7. Liquids with more high level acidity is usually alkaline. For the iPhone, they pose the least threat.

You need to know the enemy by sight - what liquids can instantly destroy a gadget?

With long-term contact with the listed substances, it will no longer be possible to save the gadget..

On the contrary, almost harmless to a smartphone in terms of oxidation sea ​​water(pH = 8.0), ammonia(pH = 11.5), bleach(pH = 12.5). Distilled water is completely harmless, from which all salts and minerals have been completely removed.

Oxidation of smartphone elements is not the only danger. It should be remembered that water is an excellent conductor of electricity. That is why the penetration of liquid into the housing can provoke short circuits, which will be repeated until the power is turned off entirely. Even one short circuit may be enough to “fry” a couple of microcircuits; several similar short circuits will definitely send the gadget “to the next world.”

On how quickly and accurately it will act iPhone owner, depends on whether he will be able to “reanimate” the device.

Dropped your iPhone in water – what to do?

To save your Apple gadget from the destructive effects of water, you need to follow this algorithm of actions:

Step 1. Immediately remove your smartphone from the water. It is obvious: Even 10 seconds in liquid can be fatal for an iPhone. After 40 seconds there is no longer a chance to save the device.

Step 2. Turn off your iPhone - this way you will protect it from short circuits. If you have a screwdriver Pentalobe, disassemble the device and remove the battery.

Step 3. Remove the cover, if there is one, as moisture has probably accumulated under the accessory. There is no need to remove the film: This should only be done if there are water bubbles.

Step 4. Dry the iPhone - remove visible moisture using napkins or other available means. You can use a cocktail straw to suck water out of holes and connectors.

Step 5. Check moisture indicators. On iPhone 3GS, 4 and 4S there are two of them: the first is located in the headphone jack, the second in the dock connector. On devices of the 5th and 6th modifications there is only one sensor, and it is located in the SIM card slot.

Image: harvestcellular.net

IN in good condition indicators have White color . If the sensors are red, water has gotten inside. What does it mean? First of all, you can say goodbye to the guarantee.

Moisture sensors are the first thing you need to look at when purchasing a handheld gadget. Our website also gives other recommendations on how to check a used iPhone.

Step 6. Take your feet in your hands and go to the repairmen.

Protect yourself from possible flooding iPhone user It will be much cheaper than eliminating the consequences of an iPhone falling into the water. In many salon chains mobile communications You can find waterproof cases for Apple devices on sale at reasonable prices. Carrying such a case every day is problematic due to its impressive size, but if you plan to visit the beach or sauna, you should resort to its help.

Is it necessary to go to the service?

If a user accidentally spills a glass of water on a smartphone and immediately dries the device, he does not need to contact the service center: such short contact does not pose a significant threat. The user should leave the iPhone turned off for several hours (so that the moisture completely evaporates), then try to “start” the gadget. Now, if the device does not turn on, this is a reason to sound the alarm.

Another situation: the owner of an iPhone came to the beach, ran into the water and only then discovered that he had forgotten to take the mobile device out of his shorts pocket. In such a situation, you cannot do without contacting a service center.

You need to go directly to the repairmen, and not to the showroom where the iPhone was purchased. The seller will refuse repairs under warranty - the owner of the device will only lose precious seconds.

You will definitely have to pay: only manufacturing defects are eliminated free of charge, but not the consequences of user negligence. Another thing is that iPhone owners tend to exaggerate the amount they think it will cost to restore their Apple gadget. No one will present a five-figure invoice - the price of such repairs will be a maximum of 4 thousand rubles for iPhone 5/5S and 6 thousand rubles for iPhone 6th modification.

It is recommended to contact a repairman for diagnostics in any case, even if the iPhone appears to work perfectly and is not “buggy.” Penetration of water into the housing can cause rotting., the consequences of which the user will notice only after a couple of months.

Common symptoms of rotting are:

• Rapid battery discharge.
• Loss of screen sensitivity.
• Problems with the Wi-Fi module.
• The speaker does not work - the sound has disappeared completely or is very quiet. Water, penetrating through the protective mesh of the speaker, immediately hits the membrane. Dust begins to accumulate on the wet membrane. Even if you manage to remove moisture from the speaker (for example, using a cocktail straw), the dirt will remain - it will form a soundproof barrier. The speaker is one of the most vulnerable components of the iPhone.

Diagnostics at a service center will cost 500-800 rubles. Most likely, this service will generally be provided free of charge if you agree to subsequent repairs in the same organization.

What should you not do if your iPhone falls into water?

No matter what advice “pseudo-experts” give on thematic forums, when flooding your iPhone, you should never do the following things:

• Use a hair dryer to dry. Yes, the flow of warm air will accelerate the evaporation of moisture, but at the same time it will contribute to the destruction of internal components.
• Wrap iPhone in towels. By “wrapping up” the gadget, you will only achieve that the humidity inside the case will increase - therefore, you will push the iPhone to death.

Leaving a smartphone in a container with rice for 24 hours is also a so-so method. Rice is an excellent moisture absorber - there is no doubt that cereal will rid the iPhone of residual liquid. However, remove crystals of salts and minerals that have already settled down on the elements of the device, rice will not be able to, which means it will not prevent the oxidation reaction.

Image: ios-data-recover.com

In addition, when you remove the iPhone from the rice, you will find that all the holes are clogged with grain. If you still decide after using this “ folk method“Take the gadget to the workshop, be sure that they will remember you with an unkind word more than once.

Conclusion

If your iPhone is flooded, it is strongly recommended to visit a service center, at least so that the technicians can carry out diagnostics. There is a high probability that the consequences of “bathing” will not appear immediately, but after a few months – repairmen will neutralize this risk. Replace qualified assistance Specialists should not use “traditional methods of treatment” - most likely, you will only do more damage to the device.

If you want to completely avoid worrying about your Apple gadget being damaged by water, you should buy an iPhone 6S or 7. Both devices are protected from moisture to varying degrees: the 6th iPhone calmly stays under water for 10 minutes, 7- Oh, he’s not at all afraid of liquids.