ONLINE REQUEST FOR REPAIRS

your name

Phone number

Subject

Replacement of glass, screen, display on iPhone 4. A technician will visit for free. Guarantee for all types of work. We will do the work in a location convenient for you. We work only with Apple technology. Repair time is 15-30 minutes. We employ only professionals. After replacing the screen, your iPhone 4 will be like new, without any traces of repair. We are always happy to help you. Call now!

iPhone 4 boasts a significantly more advanced screen than previous models. IN in this case technical excellence means complication, which makes itself felt if there is a need to replace a damaged display. Touchscreen breakdown is a common phenomenon and definitely requires the immediate intervention of a professional technician. The main signs that the screen needs to be replaced are:

• appearance of cracks on glass;
• the appearance of deep scratches;
• the appearance of white or black spots;
• partial or complete absence reactions to touch.

This happens not only due to a fall, but also due to moisture getting inside the phone. The occurrence of any indicated malfunctions clearly indicates the need to change the display.

The meaning of special service

Replacing glass on iPhone 4 very different from the similar procedure for earlier models. Why shouldn’t you interfere with the operation of the device yourself or take it to dubious workshops? The answer is extremely simple:

• difficulty level – to change the display, you need to completely disassemble the phone. This requires impeccable knowledge technical features device, extreme accuracy and composure;
• Availability of quality parts - we only purchase the best components from reliable suppliers, we provide a guarantee for spare parts. Agree that it is difficult to buy a good compatible display on your own, and many unscrupulous workshops use cheap parts to get maximum revenue for repairs;
• speed – our service center carries out iPhone 4 display replacement very quickly, which makes it easy to restore the device’s operation, including in an emergency.

iPhone 4 screen features

This model is qualitatively different from others:

• starting with iPhone 4, the display module must be completely replaced, since Touchpad tightly glued to the monitor. This adds complexity, since repairs require disconnecting many cables, the delicate structure of which is extremely easy to damage;
• integrated into the display IPS matrix, providing a clear, contrasting image and a number of other qualities of the device. The new touchscreen display must be identical in quality to the old one so that the user continues to comfortably use all the capabilities of the smartphone;
• a large number of pixels – the difference with the iPhone 3 in terms of resolution is very large, new display four times superior to older models, offering the phone owner 960x640 pixels.

All this means that the Apple-Restore service center takes responsibility not only for the installation, but also for the selection of a similar display module. For this reason, you can be absolutely sure of high quality services, provision of guarantees.

The sequence of replacing glass on iPhone 4

The Apple-Restore specialist replaces the display quickly enough, but without complete disassembly It’s impossible to get by with a gadget. iPhone 4 glass replacement requires the following procedure:

• the external mounting screws are unscrewed and the cover is removed;
• the protective fasteners of the battery cable are removed;
• this cable must be disconnected from the motherboard;
• then carefully peel off and remove the battery;
• unscrew the screws protecting the speaker cable;
• this cable is disconnected;
• the motherboard and antenna are disconnected;
• another protection is unscrewed and removed;
• the camera is disconnected and removed;
• The SIM card tray and antenna are removed;
• the motherboard and vibration motor are removed;
• the speaker is removed;
• the corner and side screws are unscrewed;
• The damaged touchscreen along with the cables is carefully separated;
• the master takes the new display and assembles the smartphone in reverse order.

As you can see, it is important not to confuse the sequence of actions, to know what this or that part of the device looks like, to handle all connections as carefully as possible, and to separate glued parts. Disassembling a smartphone is only half the battle; then you also need to assemble it correctly. The Apple-Restore service employs only professionals who will promptly carry out all the manipulations, returning the gadget completely intact. As a result, there will be no traces of the specialist’s work left on the phone at all.

Additional benefits of servicing with us

In addition to being prompt, professional and providing high-quality parts, we can offer our customers other benefits:

• high-quality service - maintenance, communication with clients, consultations - all this is not an empty phrase, we care about the comfort of the customer. You can find all conditions, prices and other information on our website or check by phone. If you wish, you have the opportunity to conveniently wait for the repair to be completed and immediately receive a working gadget;
• favorable prices – reasonable cost of repairs has great importance. By contacting us, you spend a minimum of money for high-quality, high-quality repairs;
• iPhone 4 screen replacement in 15 minutes;
• discounts for regular customers - for those who contact us not for the first time, there is a 10% discount. Special prices also apply to those customers who submit an application through the website;
• Expert visit to replace iPhone glass– choose a convenient place and time to meet with our representative, who can come to your home, office, or even repair your phone in a cafe. It is enough to indicate all the necessary data in the application. Departure is carried out both within Moscow and in the region;
• Additionally, you can order installation protective film or glass to protect the main touchscreen from damage from a fall next time.

How to order repairs at the Apple-Restore service center?

To become our client, just contact Apple-Restore consultants at any in a convenient way: by phone, through the application form on the website or by ordering back call. You can also come directly to our office or call a specialist.

Perhaps you were looking for: model number: A1431, A1387, A1387. Year of manufacture 2011

Use this guide to replace your iPhone 4's cracked or damaged display.

All necessary parts and tools are included in the kit for self-replacement, which you can purchase in our store.

• Back panel - 3 steps;
• Battery - 3 steps;
• Motherboard- 13 steps;
• Speaker - 2 steps;
• Display - 9 steps;
• New Module- 1 step.

Tools:

• Pentagonal P2 Pentalobe screwdriver for iPhone;
• Sucker;
• Phillips screwdriver #000;
• Plastic opening tools;
• Flat screwdriver 2.5mm;

Instructions for replacing the iPhone 4 screen - Rear panel

Step 1

Before disassembling your iPhone, make sure it is turned off.

Your iPhone 4 back cover can be secured with either two #000 Phillips screws or two Pentalobe screws (second image). Check what screws you have and choose the right screwdriver to remove them.

Remove the two 3.6mm Pentalobe or Phillips #000 screws next to the power connector.

The pentagonal screwdriver must be used very carefully, as it can strip the threads on the screws.

Step 2

Press back panel fingers and pull towards the top edge of the device.

The panel will move approximately 2 mm.

Step 3

Pinch the back panel with your fingers and remove it from the mobile, or alternatively use a small suction cup.

Be careful not to damage the plastic clips attached to the back panel.

If you are installing a new back panel, be sure to remove the plastic protective sticker on the inside of the camera lens and a sticker with a large black area next to the lens.

Instructions for replacing the iPhone 4 screen - Battery

Step 4

Remove the one 2.5mm Phillips screw holding the battery connector to the board.

Some devices may have two screws, one of which binds the pad, which is located above the screw indicated in red in the photo.

Step 5

Using a plastic tool, carefully pry the battery connector cover up and away from the socket on the board.

Be very careful to lift only the battery cable, not the connector on the board. If you lift the connector, you may tear it completely off.

Remove the metal clip covering the antenna connector.

Step 6

Pull the plastic tab to remove the battery from the device.

Do not remove the plastic tab from the device.

You may need to use a plastic tool to loosen the adhesive under the battery.

Remove contact clamp from the device.

Before reconnection battery connector, make sure the terminal clip (highlighted in red) is correctly positioned next to the battery connector.

Before assembly, it is necessary to clean all metal parts of the clamping contacts, as well as the connecting parts, from grease (for example, with Windex). Oil from your fingers can cause battery problems.

Instructions for replacing the iPhone 4 screen - Motherboard

Step 7

Use the SIM eject tool (or a paper clip) to remove the SIM card.

This may require significant effort.

Remove the SIM card and its frame.

Step 8

Remove the following screws:

• One 1.2mm Phillips screw;
• One 1.6mm Phillips screw.

Remove the thin steel cover of the power cable.

Before assembly, it is necessary to clean all metal parts of the steel lid from grease (for example, with Windex). Oil from your fingers can cause interference.

Step 9

Using a plastic tool, carefully lift up and disconnect the power cable from the motherboard at the two short ends of the connector.

Step 10

Carefully Slide the power ribbon cable away from the motherboard and bottom speakers.

Do not use excessive force to move the cable. This may cause it to rupture.

Step 11

Use a plastic tool to separate the bottom antenna connector from the socket on the motherboard.

Step 12

Remove the 1.9mm Phillips screw attaching the bottom of the logic board to the inner case.

Step 13

Remove the next five screws securing Wi-Fi antenna to motherboard:

• One 2.3mm Phillips screw;
• Two 1.6 mm Phillips screws;
• One 1.4mm Phillips screw;
• One 4.8mm Phillips screw.

When assembling, start with the 4.8mm Philips screw and then move to the 2.3mm screw. This is necessary so as not to confuse and damage the train.

Also ensure that the 4.8mm Philips screw is installed correctly during assembly. It is the base for the Wi-Fi antenna and is often the culprit for poor Wi-Fi reception after assembly.

Step 14

Use the plastic opening tool to slightly lift the top edge of the Wi-Fi antenna away from the motherboard.

Carefully Pull the Wi-Fi antenna latches away from the inner frame. This can be done with a fingernail, the tip of a utility knife, or tweezers.

Remove the Wi-Fi antenna from the device. Be sure to make sure that the metal latches on the top of the cover where the 4.8mm screw is attached, and the 4.8mm screw itself, are not lost. This is the main reason for Wi-Fi not working after assembly.

Before assembly, it is necessary to clean all metal parts of the steel cover in contact with the connectors from grease (for example, with Windex). Oil from your fingers can cause interference. The connectors themselves cannot be cleaned with this product!

Step 15

Using the opening tool, carefully lift the rear camera connector up from its socket on the motherboard.

Remove rear camera.

Step 16

Remove small round white sticker(warranty sticker and water indicator) covering the screw near the battery tab.

Remove the 2.4mm Phillips screw that was hidden under the sticker.

Step 17

Using the tip of the opening tool, carefully disconnect the following cables from the board:

• Sensor cable (lift from below);
• Display cable (lift from below);
• Cable for headphone jack/sound control buttons (lift from above);
• Top microphone/power button cable (lift from top);
• Front camera cable (lift from above).

Step 18

Use a flathead screwdriver to remove the 4.8mm fastener near the headphone jack.

When assembling the device, this fastener will set the height of the Wi-Fi shield removed in step 13. If not tightened, the shield will be higher than desired and the back panel will not be able to be installed as in step 2. The shield should be flush with the headphone jack.

When assembling the motherboard, make sure that the edge of the motherboard is under the circled fasteners, otherwise the screws will not fit.

When reassembling, make sure that the small rubber pad is attached to the top of the motherboard. Without this part, the motherboard may damage the cables near it.

Step 19

Carefully remove the motherboard from the iPhone, being mindful of any cables you may encounter.

Be careful not to damage the small gold prong (marked in red, at the top of the device), it is very fragile.

When assembling, be careful not to cover the bottom antenna cable under the motherboard.

Instructions for replacing the iPhone 4 screen - Speaker

Step 20

Remove one 2.4mm Phillips screw securing the speaker to the frame.

Step 21

Remove the Speaker from the device.

Before reattaching the speaker housing to the inner frame, ensure that the four small EMI pins are below the edge of the display frame.

Before assembly, all metal-to-metal contacts between the EMI pins and the inner frame, as well as the brass screw groove, must be cleaned of grease. Oil from the fingers can cause interference with operation.

Instructions for replacing the iPhone 4 screen - Display

Step 22

Remove the following two screws securing the vibrator to the inner frame:

• One 6mm Phillips screw;
• One 1.4mm Phillips screw.

Remove the vibrator from the device.

Step 23

Remove the 1.5mm Phillips screw securing the front panel next to the headphone jack.

Step 24

Remove the three 1.5mm large-head Phillips screws along the side of the volume button.

Step 25

Remove the 1.5mm Phillips screw near the microphone.

Step 26

Remove the 1.5mm Phillips screw next to the power connector ribbon cable.

Step 27

Remove the three 1.5mm Phillips screws from the side of the SIM card.

Keep an eye on the washers under each screw.

Tip: You don’t have to completely unscrew the screws around the perimeter of the case, but only loosen them by 2/3; this should be enough to subsequently separate the screen from the case.

Remove the 1.5mm Phillips screw near the rear camera.

Step 28

Carefully insert the edge of the opening tool between the rubber frame of the front glass panel and the steel inner frame.

Do not try to insert the tool between the glass and the rubber frame.

Carefully bend the top edge of the front panel away from the steel frame.

Step 29

Slowly and carefully lift the top edge of the front panel away from the steel frame.

Continue to pull the front panel out of the steel frame until it slowly begins to separate from the adhesive underneath the area. Home buttons.

Carefully pull the bottom edge of the module away from the steel inner frame.

Be careful! If the Home button sticks to the front panel, you may break its cable.

Do not turn the module over or remove it completely from the frame. This may damage the cable.

If the glass is cracked, removing the panel may cause it to bend, causing small pieces to fly off. Before doing this step, cover windshield film, then detach it over the trash can. Wearing safety glasses is also a smart move.

Step 30

Disconnect the cable and carefully remove it from the steel frame.

Before attaching the front panel to the steel frame, make sure that the cable is not folded or stuck between the inner frame and the front panel. This may damage it.

When the front panel is installed correctly, the sensor cable and display cable should be in close proximity to each other, the same length, and should just hang over the steel frame.

Make sure the cables are not stuck between the screen and frame.

When replacing the module, you must remember that you may have to use a speaker grille and a clear plastic ring around it. front camera from an old/damaged module. This will depend on the configuration of the new part.

Fair, not overpriced and not underestimated. There should be prices on the Service website. Necessarily! without asterisks, clear and detailed, where technically possible - as accurate and concise as possible.

If spare parts are available, up to 85% of complex repairs can be completed in 1-2 days. Modular repairs require much less time. The website shows the approximate duration of any repair.

Warranty and responsibility

A guarantee must be given for any repairs. Everything is described on the website and in the documents. The guarantee is self-confidence and respect for you. A 3-6 month warranty is good and sufficient. It is needed to check quality and hidden defects that cannot be detected immediately. You see honest and realistic terms (not 3 years), you can be sure that they will help you.

Half the success in Apple repair is the quality and reliability of spare parts, so a good service works with suppliers directly, there are always several reliable channels and its own warehouse with proven spare parts current models so that you don't have to waste extra time.

Free diagnostics

This is very important and has already become a rule good manners for the service center. Diagnosis is the most difficult and an important part repair, but you do not have to pay a penny for it, even if you do not repair the device as a result of it.

Service repairs and delivery

Good service values ​​your time, so he offers free shipping. And for the same reason, repairs are carried out only in the workshop of a service center: they can be done correctly and according to technology only in a prepared place.

Convenient schedule

If the Service works for you, and not for itself, then it is always open! absolutely. The schedule should be convenient to fit in before and after work. Good service works on weekends and holidays. We are waiting for you and working on your devices every day: 9:00 - 21:00

The reputation of professionals consists of several points

Company age and experience

Reliable and experienced service has been known for a long time.
If a company has been on the market for many years and has managed to establish itself as an expert, people turn to it, write about it, and recommend it. We know what we are talking about, since 98% of incoming devices in the service center are restored.
Other service centers trust us and refer complex cases to us.

How many masters in areas

If there are always several engineers waiting for you for each type of equipment, you can be sure:
1. there will be no queue (or it will be minimal) - your device will be taken care of right away.
2. you give to Macbook repair an expert in the field of Mac repairs. He knows all the secrets of these devices

Technical literacy

If you ask a question, a specialist should answer it as accurately as possible.
So that you can imagine what exactly you need.
They will try to solve the problem. In most cases, from the description you can understand what happened and how to fix the problem.

Thanks to this guide, you can do it yourself. Replacing the display module will give you new glass, touch screen and LCD display. The LCD screen is glued to the glass at the factory and it is very difficult to separate them without damage. After successful replacing the display module in iPhone 4, we recommend protecting your new display from scratches, it is necessary install protective film.

iPhone 4 disassembly tools

• Plastic tools Opening
• Small flathead screwdriver
• Spudger
• iPhone 4 5-point Pentalobe screwdriver if iPhone has external pentalobe screws
• iPhone SIM card removal tool or paperclip

Step 1 — iPhone 4 Back Panel

iPhone 4 back cover May have either a 2#000 Phillips screw or an Apple 5-Point "Pentalobe" screw. Check what screws your model has and make sure you also have the right screwdriver to remove them.

Remove the two 3.6mm Pentalobe or Phillips #000 screws next to the dock connector. During reassembly, we recommend that you replace the 5-point screws with the same type as Phillips screws.

Step 2 - Remove the back panel

Press the back panel at the top of the iPhone 4 and slide the panel back 2mm.

Step 3 – Remove the back cover of iPhone 4

Step 4 - iPhone 4 Battery

Remove the one 2.5mm Phillips screw holding the battery connector to the board. Some models may have 2 screws, one of which holds the pad, which is located above the screw.

Step 5 - Metal Connector

Use iPod opening tool To remove the battery connector, pry it close to the top and bottom edges of the iPhone 4. Be very careful to only lift the metal connector, not the black connector on the motherboard. If you try to lift the board connector, you may break the connector completely.

Step 6 - Remove the battery from the iPhone 4

Pull the transparent plastic tab to remove it iPhone battery. Be careful when removing the battery with the plastic tab. On some models, Apple uses a large amount of adhesive, which makes it almost impossible to remove the battery this way, and therefore the plastic tab can be torn off.

To remove the batteries, use a plastic scribe. To do this, pick up the battery on the right side, since there is no glue used at all.

Remove the battery.

Before replacing or reinstallation batteries, make sure contact pads(shown in red) are correctly located next to the battery.

Before assembly, make sure all metal contact pads are clean, if not, use a special lubricant such as Windex (96% ethanol alcohol, and make sure the contacts are dry after wiping). Oil on the fingers can impair the electrical conductivity of some contacts and cause interference.

Step 7 - Removing the SIM Card from the iPhone 4

Using the tool for removing the SIM card or a paper clip to remove the SIM card and its holder.

Step 8 - IPhone 4 Dock

Remove the following two screws:

• One 1.2mm Phillips
• One 1.6mm Phillips

Pull out the thin steel connector of the iPhone 4 cable management dock.

Before reassembling, be sure to clean the pads on the dock connector cable cover.

Step 9 - Dock Cable Connector

Gently lift the dock cable connector up and away from the system board.

Step 10 - Dock Cable

Carefully remove cable for docking station and lower speaker. Do not use excessive force to disconnect docking station cable from the system board, the cable can easily break.

Step 11 - Antenna

Disconnect the lower antenna connector at the top from its slot on the board.

Step 12 — Fastening the iPhone 4 motherboard

Remove the 1.9mm Phillips screw at the bottom that holds the motherboard to the case.

Step 13 - iPhone 4 Wi-Fi Antenna

Remove the next 5 screws securing Wi-Fi antenna to the board:

• One 2.3mm Phillips
• Two 1.6mm Phillips
• One 1.4mm Phillips
• One 4.8mm Phillips

When assembling, start with the 4.8mm Philips screw and then the 2.3mm. This is done in order not to confuse the sequence and avoid damage to the LCD and touch screen. Also make sure that the long 4.8mm Philips screw is put back in the correct order. Since it is the basis for Wi-Fi antennas and is often the culprit bad wifi reception after assembly.

Step 14 - Pull out the Wi-Fi antenna

Slightly lift the top edge of the Wi-Fi antenna away from the system board.

Pull out Wi-Fi antenna for iPhone 4. Try not to lose the metal clips on top cover and 4.8 mm screw. Their loss is the main reason bad Wi-Fi signal after assembly.

Step 15 — iPhone Rear Camera

Carefully lift and remove the rear camera from its slot on the board.

Step 16 - Warranty sticker and water ingress indicator

Remove the small round white sticker - this is warranty sticker and water ingress indicator, covering the screw next to the battery tab. Remove the 2.4mm Phillips screw that was hidden under the sticker.

Step 17 - Cables

Use the edge of the plastic opening tool to carefully pry the following connectors out of their sockets on the motherboard:

• touchscreen cable
• LCD screen cable
• headphone jack and cable volume buttons
• microphone
• front camera cable

Step 18

Using a small screwdriver, remove the 4.8mm screw next to headphone jack. When assembling the device, this screw sets the height WiFi screen , filmed earlier. The screen should be flush with the headphone jack.

When assembling the board, make sure that the edge of the board is under the circle, otherwise the screws will not fit.

When assembling, make sure that the small rubber gasket is in its place at the top iPhone 4 motherboard. Without this gasket on the motherboard, the cable around it may be damaged.

Step 19 - iPhone 4 Motherboard

Remove carefully system board iPhone 4, disconnecting any cables that might come in your way. Be careful not to damage the small gold plated contact (marked in red at the top) - it is a very fragile part.

Step 20 - Speaker

Remove one 2.4mm Phillips screw from the speaker housing towards the inside of the frame.

Step 21 - Speaker

Remove the housing iPhone speaker 4 .

Step 22 - Vibration Motor

Remove the next 2 screws holding vibration motor to the inner frame:

• One 6mm Phillips
• One 1.4mm Phillips

Pull out iPhone 4 vibration motor.

Step 23 - Headphone Jack

Remove the 1.5mm Phillips screw on the front panel next to headphone jack.

Step 24 – Volume Side Button on iPhone 4

Remove 3 large 1.5mm Phillips screws lengthwise side volume button on iPhone 4. Be careful not to lose the washers under each of the screws.

Step 25 - Microphone

Unscrew the 1.5mm Phillips screw near the bottom microphone.

Step 26 - Dock

Remove the 1.5 mm Phillips screw next to the ribbon cable from the connector docking station.

Step 27 — SIM card holder and sleep button

Unscrew the 3 large 1.5mm Phillips screws lengthwise SIM holder iPhone cards 4 . Don't forget the washers under each screw.

Unscrew the 1.5 mm Phillips screw near sleep buttons.

Step 28 - Opening the front panel of the iPhone 4

Insert the opening tool into the gap between rubber frame around a glass front panel and a steel internal frame. Do not try to insert the tool between the glass and the rubber frame.

Carefully lift the top edge of the front panel away from internal steel frame.

Step 29 - Separating the Front Panel

Carefully separate top edge of front panel from the inner steel frame.

Carefully separate bottom edge of front panel from the internal steel frame.

Be careful sometimes Home button sticks to the front panel and you can break the cable from it.

Step 30 - Touchscreen and screen cable

Before reattaching the front panel to the internal steel frame, ensure that cables from LCD screen and touchscreen are not twisted or pinched between the inner frame and the front module - this could damage the cable. When the front panel is installed correctly cable from LCD and touch screen should be next to each other and the same length, and should just hang over the steel frame.

When replacing the front module, remember that you may have to re-install change speaker grille And clear plastic rings around the anterior chamber. It all depends on where you bought it Iphone 4 spare parts.

After assembly, protect your new display from scratches by gluing it to protective film.

Step 31 — Replacing the Iphone 4 Screen

Usually new lcd screens for iphone 4 Come with red plastic film on the back l cd display. If you have one, use the tab near Home buttons to remove the film from lcd screen before installing a new one display on iPhone.

Video instructions for disassembling iPhone 4

The main, if not the only, damage to the iPhone4 is broken glass. Careless and careless handling of such equipment can lead to the phone losing its usual appearance and becoming a source of constant irritation for the owner.

How to replace broken glass on iPhone 4 yourself?

The main, if not the only, damage to the iPhone4 is broken glass. Careless and careless handling of such equipment can lead to the fact that a beautiful and convenient phone suddenly loses its usual appearance and becomes a source of constant irritation for the owner. A damaged screen with cracked glass causes discomfort when working with the phone, especially unsightly appearance device causes mass negative emotions. The iPhone 4 is designed to have a single glass and display module, so a display with broken glass renders the device unusable. further use. The first thing you can do in this case is to contact one of the service centers that repair mobile phones. Another option is to try to replace the broken screen unit yourself. For those owners who have an idea about mobile phones, Iphone 4 glass replacement is quite possible to carry out the repair yourself. The procedure for replacing a touchscreen is labor-intensive, so in addition to the availability the necessary tool, you need to be patient.

It is best to buy a new screen module in a specialized store, this will protect you from purchasing a counterfeit. The entire repair may not take much time, depending on the skills and availability of the right tools.

The repair will have to start with disassembling the entire phone. In order to gain access to the screen unit, you need to remove back cover. Then you need to disconnect the cable and battery. Then the protection of the upper loops is removed and only then the protection of the lower loop is removed charger. By following the order of disassembly, you can quickly gain access to the mobile phone display. When contacting cables, you must be extremely careful so as not to damage them. Then everything is done in order. Each functionality is removed in a certain sequence. After removing the GSM antenna, you should pay attention to the state of the water indicator. Depends on its color general state mobile device. Then comes the turn of the camera and microphone speaker.

The entire procedure for replacing the screen unit involves thoroughly disassembling the phone. Now that all the contents of the device have been removed, you can replace the glass of the iPhone 4, together with the display itself. You need to remove the broken module very carefully so that the parts broken glass did not hit the phone case. After thoroughly cleaning the phone case and the place where the new screen unit will be installed, you can install a new touchscreen and reassemble the device in the reverse order. The whole operation takes no more than an hour, especially since by replacing the module you can significantly save on repairs. A simple glass replacement operation, and the phone is like new again. IN service center In addition to the repair fee, the repair itself could take an indefinite period of time.