Lg won't load beyond the logo. What to do if your Android Lenovo phone is frozen


A smartphone is an important tool without which we find it difficult to spend even one day. When this device fails us, it can cause big or small troubles, but in any case it is unpleasant. It can be even more unpleasant when you don’t know what exactly happened to the smartphone. When it just doesn't turn on for some reason. If you have to deal with this, here are the things to look for to identify the cause.

Is it charged?


Yes, you may think it's stupid, but most of the time it's the smallest things that cause anxiety. There is a chance that you simply YouTubed your smartphone to death and did not notice how it was discharged. It's easy to check - connect your smartphone to a power source. It is worth remembering that in some cases the device may be so discharged that it will not even be able to immediately turn on or show a charge indication. Give him a few minutes of time.

Is your screen working?


There is a chance that your smartphone is working, but you simply cannot see the image on the screen. It's easy to check. Turn off your smartphone by long pressing the power key and then turn it on. If you hear the telltale sound of your device turning on but there is still no image on the screen, your screen is probably broken or there is a problem with your display drivers. In this case, you have a direct route to the workshop.

Did any moisture get in?


Most phones do not like water, and those that, according to manufacturers, are not afraid of it, do not like it either. If your phone gets wet, it may cause short circuit. Also, if moisture got in before, but the phone worked fine, it's possible that corrosion has simply corroded the contacts inside your phone. It is best to contact a workshop after exposure to moisture.

How did the phone behave before it was turned off?


If your smartphone was not working correctly before it stopped turning on, for example, it was simply too slow, then your problem may be solved by firmware. Shift software It’s better to trust a specialist if you don’t consider yourself one.

How is the battery doing?


Your phone may also not turn on or charge because the battery has failed. If you can look at it just by opening the lid, check to see if it is bulging. It is unsafe to use a swollen battery and must be replaced immediately. We have already discussed how to understand that the battery needs to be replaced.

Is your charger working?


If you put your smartphone on charge, but it shows no signs of life, I recommend trying a different charging cable, adapter, or even an outlet. Unfortunately, smart devices often fail. It is also worth adding that your connection connector may be faulty charger. Modern microUSB connectors are not very reliable. Check how the nest looks inside and whether it is wobbly.

Do you just see the logo?


If your phone still turns on but can't boot past the manufacturer's logo, it's a software problem called a bootloop. This problem may occur to you if you have recently updated or flashed your device. In this case, a factory reset, clearing the cache, or changing the software will probably help you. You can entrust this matter to specialists or check on the Internet how to reset settings on your smartphone model.

Based on materials from AndroidPit

Hi all. Today I would like to look at all the most common reasons why an Android smartphone may not turn on. I will not touch on situations where disassembling the phone and interfering with the electronics is required, since this is the work of completely different specialists.

If your smartphone or tablet suddenly suddenly stops turning on, you don’t have to immediately run to service center or a workshop and send it for repair. Most likely, there is a chance that you can do it on your own and save some money (programs for managing home accounting on Android, look for them on the blog). Below we will look at the main measures that can be taken if your Android smartphone or tablet does not turn on. So, let's get started.

Android phone won't turn on. 5 ways to solve the problem.

Method No. 1

From my own experience, I will say that in 80% of all cases, if they come to me with a problem that the phone does not turn on, the whole problem turns out to be a dead battery. And I understand perfectly well when they tell me that they’ve been charging their smartphone all day, but it still won’t turn on. Some devices have one unpleasant feature- if you discharge the battery too much, it will not charge, even if you keep it charging all day.

In this case, a frog-type charger will help us, which allows you to charge almost any battery directly by removing it from the phone. It is enough to recharge the battery in this way for 15 minutes. Then you insert it back and put the phone on charge as usual, everything should be OK.

If getting a frog is problematic for you, then you can use any old cell phone charger. Cut off the old plug and protect the wires.

Make sure that the charger is not connected to the outlet at this time.

We fix the exposed wires to the battery with tape for a few minutes.

Important. Do not reverse the polarity.

Method No. 2

Faulty charging. Of course, the second thing to check is the serviceability of the charger. Everything is simple here - we take a known working charger and try to charge our smartphone. If the process has started, then we buy a new one and rejoice. Although it sounds banal, it helps every fifth person.

Method No. 3

If the phone does not turn on, then perhaps it is simply frozen. To revive your device, we’ll use a long-known but still relevant method - remove the battery and reinsert it.

Unfortunately this technique doesn't work for many people. modern phones With non-removable battery. In this case, to reboot you need to find the reset button and press it, for example with a paper clip. It can be anywhere, but, as a rule, it is located near the SIM card slot or on the back of the smartphone or tablet. Near the reset button there is sometimes a message reset or off. The photo below is an example of the location of such a button in a smartphone.

Method No. 4

This method is applicable if your phone not only does not turn on, but does not turn on completely. For example, it gets stuck on your Android logo and nothing else happens. This happens due to a glitch in the smartphone software. Then a hard reset will help us ( hard reset) or, translated, hard reset. It is done differently for each device model. To find out how, enter the name of your phone and the words hard reset, for example LG G3 hard reset, in Google or Yandex and follow the instructions. In the future I hope to create a blog separate section on this topic.

Unfortunately, not all smartphones support hard reset; it depends on the recovery installed in the device. If you are interested in learning more about what it is, search the Internet.

For example, this function is not available by default in many Sony phones, but the manufacturer has provided the ability to restore the software using special utility Sony pc companion.

Method No. 5

Not often, but it still happens that smartphone won't turn on due to the fact that the contacts under the battery do not reach. To fix this, you need to use tweezers or a small screwdriver to bend the contacts to improve the connection to the battery. The main thing here is to avoid fanaticism, otherwise you will only make things worse.

Android phone gets stuck on the logo when turned on and won't boot further. What to do?

  1. Thank you very much helped))
  2. Ask him again)
  3. Delete Play Market and stop downloading
  4. The firmware is damaged. If there were no root rights, then you can try to restore it through recovery.
  5. The phone needs to be re-flashed - w3bsit3-dns.com help
  6. Hi all. I faced the same problem myself. But I was able to solve it very easily. I pressed the volume up button and turned on for 30-50 seconds. The phone turned off and then turned on normally.
  7. Do general reset phone (with loss of all data in memory):
    Option 1
    Turn off your phone.

    As soon as the recovery menu appears, you can release the buttons.



    Option2
    Turn off your phone. With the battery completely removed and inserted back.
    Press and hold the Volume Up + Volume Down + Power buttons.
    In the menu that appears, press Volume Up.
    In the menu that appears, select Wipe data/factory reset (move through the menu using the volume keys, confirm the selection with the Options button ( touch button with four squares))
    In the new menu, go down to Yes -- delete all user data and confirm your choice
    After that, select Reboot System.
  8. only flashing
  9. reflash
  10. It hangs on loading and after 2 minutes it reboots and does the same again. I reflashed it via flash tool. The flash drive showed everything ok but the problem remained the same
  11. Try http://your-mobila.ru/kak-sdelat-hard-reset-na-android.html
  12. guys, help me, I really need it, I have a problem with my tablet, when I turn on the tablet it freezes on the Android screensaver and does nothing, I even reset all the data and it doesn’t help!!!
  13. I had a situation where my phone just ran out of charge and just needed to be charged.
  14. Well, yes
  15. Yes, of course, I did everything as written, reset it and all that, I turn on my mobile phone and still the screensaver still hangs, so what should I do now?..
  16. I do everything exactly as described in all the tips from different sites, but the phone stops at the splash screen: SAMSUNG GALAXY S7 Android. I wanted to flash it again, but Odin does not see the phone, although the drivers are installed and it appears in the device manager when connected in Bootloader mode Android Bootloader Interface. Inclusion in others USB ports gives the same result. I tried to install the firmware from the SD card, it says, downloads the zip package and then Abort. When loading into Factory Mode all tests are running. What else can you do? As I understand it, it’s an insurmountable trifle of not being able to bypass bootloader errors, which even corrupted the firmware itself. Resetting the entire system to factory settings does not help. It's a shame that even though the phone's hardware is fully functional, the system simply won't boot ( Samsung Galaxy S7 SM-G930FD, Android 6/01). The Kies utility does not help, since it also “does not see the phone.” What else can you do?

As a result of hardware failure or OS malfunction, any Android smartphone may stop responding to the power button. Another common problem is when the phone does not turn on beyond the screen saver. At the same time, you can see on the screen the logo of the manufacturer or the standard “green robot” of the Android system, but then nothing happens.

If the gadget is stuck on the screensaver, there are 4 main reasons for the defect:

  1. Critical hardware failure as a result of water getting into the case, overheating of the board, or a strong shock. In this case, Android may start loading and finally fail.
  2. Incorrect actions when installing custom firmware, resulting in failure of the operating system.
  3. The memory card is incompatible with the device.
  4. An insufficient amount free memory, slowing down the switching process. In this case, the phone boots, but very slowly: within 3–5 minutes.

Phone stuck on startup screen

What you definitely shouldn’t do is disassemble the case yourself in an attempt to determine the cause of the breakdown. Without the appropriate skills, you can not only lose the warranty, but also completely “kill” the device. If you accidentally flood or drop your gadget, contact an official service center or a reliable technician for help.

We take out the memory card

Be sure to remove the memory card from the device. Almost half of all startup glitches are caused by this small memory chip. How to do this correctly, see the instructions for the device, universal method not here.

How to determine if the battery is good

A common cause of problems is battery failure. It is quite easy to determine the defect: if, when connected to the power adapter, a charging icon appears on the screen, increasing the charge level over time, everything is fine. But if, when you disconnect the charger, the gadget completely stops responding to button presses or refuses to charge, there is probably a problem with the battery or power connector. In this case, the only correct solution is to contact the manufacturer’s service center. For example, for owners Samsung lines Galaxy warranty service held at Samsung centers.

Virus infection

Quite a rare reason serious damage. In this case, there may be extraneous pictures on the smartphone screen instead of the download icon.

Solution: check third-party antivirus by connecting your smartphone to your PC.

If you suspect that malware has entered your system, you can try to find information on removing specific types of viruses on the forums of well-known developers of antivirus products: Dr. Web, Kaspersky and Nod32.

Software malfunctions

Most common reason Freezes when Android does not load beyond the logo. To fix the problem, try entering Recovery Mode:

  • For Samsung Galaxy with Bixby button - hold down the power switch, volume up and Bixby at the same time. When appears on the screen Samsung inscription, release the power.
  • For other Samsung gadgets - press the volume up and down buttons, as well as the lock button, then wait for the download icon to appear.
  • LG - hold down the volume down and power control, release after turning on the screen.
  • HTC - instructions are identical to LG devices.

After hitting Recovery menu, which is navigated using hardware buttons, you can take the following actions:

  • Clear cache by selecting Wipe Cache Partition using the volume rocker and lock button.
  • Produce full reset to factory settings, deleting all data. The Wipe Data/Factory reset option is responsible for this action. Please note that this action will delete all your data and return the device to its factory state.
  • After execution necessary settings, select Reboot System Now to attempt a reboot.

If the above steps did not help, all that remains is to flash the device manually using a computer and special programs. For example, for Samsung it is the Odin utility. For each device, the instructions and firmware themselves are different, necessary information You can find it specifically for your phone on the forums.

Conclusion

The smartphone freezing during the loading process can occur due to the most various reasons. In some cases, it is possible to solve the problem on your own; in others, only contacting a service center will help. Repair cell phones is not an easy task, and it should be trusted only to proven professionals. You should not look for help at the nearest market or try to disassemble the device with improvised means - this will only cause harm and void the warranty. To avoid similar breakdowns in the future, remember a few simple rules:

  • Do not flash your smartphone with Chinese “left” firmware without sufficient experience.
  • If you find a defect, do not panic and do not try to disassemble the device.
  • Use antivirus software and regularly scan your smartphone for malware.

Video







2024 gtavrl.ru.