What custom firmware is best to install on ps3. Installing firmware for Sony PS3


PS3 Super Slim is the third generation of PlayStation game consoles, the owner of which will be able to enjoy the console’s extensive capabilities and entertaining games. The Super Slim version differs from the Slim model in that it is 20% smaller in size and 25% lighter in weight. The device is equipped with a 250 or 500 GB drive. Using the console, you can not only play games, but also listen to music, surf the World Wide Web and send emails.

Firmware

http://dus01.ps3.update.playstation.net/update/ps3/image/us/2014_0826_8c5c36958ba5faacdc6e477797c051b8/PS3UPDAT.PUP

PS3 Super Slim firmware allows you to expand the functionality of the device, update software and restore functionality in case of system errors.

How to flash PS3 Super Slim

Method 1

  1. Download the firmware file for flashing and rename it to PS3UPDAT.PUP.
  2. Format the flash drive to FAT32, create a directory on it PS3/UPDATE, and then copy the firmware file there.
  3. Connect the flash drive to the PS3 Super Slim.
  4. Turn on your game console.
  5. On the screen, select "System update", then "Updating from storage media". Then follow the instructions on the screen.
  6. Wait for the firmware installation to complete.

Method 2

  1. Follow steps 1-3 from the previous method.
  2. With the console turned off, hold down the power button until you hear 2 short beeps, after which the PS3 Super Slim will turn off. Release the button.
  3. Press the power button again until you hear 1 short beep and then two short beeps.
  4. Perform all actions according to the instructions on the screen. The system update item will be located at the very end of the menu.
  5. During the update, the console will turn off several times. Do not press anything or turn off the power. After the firmware is completed, you will see a screen with the initial settings.

Before you start flashing your PS3 Super Slim, remove the disc from the drive, because if there is a disc in the drive, the update will start from there.

Not every owner of a PlayStation 3 console has the money and ability to hire a specialist to flash this console's firmware. If you are one of them, and you really want to play new games, then you can easily reflash your console at home. You will learn how to do this from this material, where we will look in detail at the process of flashing the PlayStation 3 console using the example of Rogero firmware - 4.55 v1.00.

Installing the firmware version on PS3

First of all, you need to find out what version of software your console is using. To do this, do the following:

    1. Launch your console.
    2. Go to Settings and go to System settings.


    1. Select item here System information, where the firmware version will be indicated.


Important! To use custom firmware, the installed software must be no higher than version 3.55.

Software update to version 3.55

If your console is compliant and has software version 3.55 installed, then skip this step.

To update the software to version 3.55, do the following:

  1. Open the USB flash drive on your computer, where you create a folder PS3, in which create another folder called UPDATE(all letters are capitalized).
  2. Download the image and unzip its contents, after which the file PS3UPDAT.PUP copy to folder UPDATE on a flash drive.
  3. Connect the flash drive to the PS3, then follow the path System update – Updating from storage media.
  4. When the update process is complete, restart your console.

Firmware installation

Well, now you have console version 3.55 and you can start installing the firmware itself. To do this, do the following:

  1. Download the firmware Rogero - 4.55 v1.00 via this link.
  2. Change the name of the downloaded file to PS3UPDAT.PUP.
  3. Unzip the contents of the image into a folder UPDATE on the flash drive that you created when updating the software version.
  4. Connect the USB flash drive to the console, then completely turn off the power to the console. After turning off the power, turn it back on.
  5. Hold down the power button of the console for several seconds (until the console turns on and turns off on its own).
  6. Hold the power button again until the PS3 beeps twice, then release the button.
  7. This will start the console in recovery mode. Here you need to use the joystick to enter System update.
  8. Wait for the update to complete, then reboot the console.

After completing all the above steps, the firmware of your console will be updated.


New release of Cobra custom firmware 4.76 from the developer Habib. The firmware contains a new patch, Cobra 7.20 (simpler than 7.2), and otheros is also present for the ability to install Linux on .

Firmware installation
Before installation, be sure to disconnect the Internet from the console!, and be sure to remove the Blu-Ray disc with the game from, if there is one in the drive (this is necessary because the PS3 is updated from the disc first).

Method No. 1



04. Turn on your PS3.
05. On PS3, select system update, update from storage medium, then follow the instructions on the screen.
06. Firmware installed.

Method No. 2
01. Rename the downloaded firmware file to PS3UPDAT.PUP.
02. Copy the firmware file PS3UPDAT.PUP to a USB flash drive (FAT32) to the PS3/UPDATE folder.
03. Insert the USB flash drive into the PS3.
04. Turn off your PS3.
05. Press and hold the power button until you hear two short beeps, after which the PS3 turns off, then release the button.
06. Press the power button again and hold it until you hear first one short beep, and then two short beeps, then release the button.
07. Do everything according to the instructions on the screen, select the system update located in the very last paragraph.
08. The PS3 will shut down several times (don't touch the console at this point) and will eventually bring you to the initial setup screen.
09. Firmware installed.

Already now, Sony PS3 owners are rejoicing with delight, because now you can completely simply and quickly flash your game console and freely download and install games. Today, we will introduce you to the step-by-step actions of PS3 firmware.

First, a little theory.

Jailbreak or simply firmware is changing/unlocking the software shell of your console. After flashing the firmware, your game console will be able to run games downloaded from the Internet without having a licensed disc, as well as install various applications written by craftsmen for the convenience of using the console.

Firmware history:

On December 29, 2010, a security flaw was found in the PS3.
On January 9, 2011, George Hotz (Geohot) released the first custom firmware of its kind for the PS3, which made it possible to run any software on a curling iron.
On January 17, 3.55 Waninkoko CFW was created and posted on the network
On January 18, 3.55 Wutangrza CFW was created and posted online
On January 19, 3.55 Kmeaw CFW was created and posted online
On January 27, the official 3.56 firmware was released
On January 29, 3.55 Waninkoko CFW version 2 was created and posted online

What you need to flash the console firmware:

1. Set-top box with firmware no higher than 3.55 (see below how you can check the firmware version of your console)

2. Flash drive formatted in the FAT32 file system

4. A little patience and attentiveness :)

How to check your firmware version?

Everything is very simple. To do this, follow these steps: Turn on the console and go to the menu “ Settings" — "System" — "System Information"- here your firmware version will be visible (example: 3.41, 3.55, etc.).

ATTENTION! To flash the set-top box, you must have official firmware 3.55 installed.

Firmware update methods.

There are 3 ways to update the firmware, let's look at each of them.

A) From a flash drive. Download the firmware. Next, create the “PS3” folder on the flash drive and the “UPDATE” folder in it (the names of both folders must be written in capital letters) and throw the downloaded firmware there.

ATTENTION! The firmware should be located approximately in the following path: H:/PS3/UPDATE/PS3UPDAT.PUP

b) From a flash drive, through the Recovery menu. To begin with, we prepare flash drives with firmware according to the instructions above (see paragraph “ A)", update from flash drive). Turn off the console. Place your finger on the console's power button and hold it until the console turns on and off. We remove our finger and press the console power button again and wait until we hear a double “peep-peep” (during the process, the console will beep but with a large interval, you need to hold it until the double peak), after which we remove the finger. The console will ask you to connect the game controller using a wire, which is what we must do.

Select the item “Firmware update” (it’s the last one in the list) and wait for it to finish.

Video of the whole process:

c) Via the Internet from XMB. ATTENTION!Using this method, the update will occur immediately to the latest firmware and if you need 3.55, then do not use this method!

Selecting custom firmware

At this stage, you will need to decide what custom firmware you will install for yourself. At the moment there are 4 versions of different firmware.

I would like to note that the quality of each firmware sometimes differs greatly for each user, which is why your task is to choose the best option for your console!

ATTENTION! It is more reliable to flash the console in the recovery menu (see above for the method of getting into the recovery menu). Although many people are able to carry out the necessary operations via XMB without any problems.

1. CFW by kmeaw.

This firmware already has built-in lv2.pkg (there is no need to install it separately, but you will still have to run it every time). Accordingly, there are NO bricks.

Firmware installation:

  1. If you have GEOHOT, then you can put it on top of it, without OFW.

Video instructions for installing firmware from kmeaw.

2. CFW from Geohot.

This firmware was the first. There is no chance of getting a brick with her. Games are launched from the internal hard drive using a previously found and installed game pkg file. This method allows you to run games without a disc in the drive! In the latest versions of managers, it is now possible to run games without pkg and even from external drives!

Firmware installation:

  1. We update to the original firmware 3.55. (3 methods are described above)
  2. Download the firmware from Geohot - HERE. And we update the system from a flash drive.

3. CFW from Waninkoko.

The first firmware with support for file managers! It is also possible to launch games from an external hard drive.
But first, let’s look carefully at which revisions of consoles can be updated with firmware!

You can see the revision number of your console on the back (bottom) cover. ATTENTION! There may also be numbers after the revision number (for example, CECHH08 is the same CECHH).

NOT slim consoles:

They are being bricked

  • CECHA = 256MB
  • CECHB = 256MB
  • CECHC = 256MB
  • CECHE = 256MB
  • CECHG = 256MB
  • CECHH = 16MB
  • CECHJ = 16MB
  • CECHK = 16MB
  • CECHL = 16MB
  • CECHM = 16MB
  • CECHP = 16MB
  • CECHQ = 16MB

Slim version:


Successfully

  • CECH-20..A = 16MB
  • CECH-20..B = 16MB
  • CECH-21..A = 16MB
  • CECH-21..B = 16MB
  • CECH-250.A = 16MB
  • CECH-250.B = 16MB
  • CECH-251.A = 16MB
  • CECH-251.B = 16MB

Firmware installation:

  1. Install the original firmware 3.55 (OFW). If you have CFW 3.55, then we do this through the recovery mod.
  2. Download the firmware - HERE.
  3. We update via a USB flash drive via XMB.

4. CFW from Waninkoko version 2

New firmware version from VanyaKokos. This time they promise no bricks. Otherwise the firmware is quite stable! It seems to be based on Hermes. People respond extremely positively.

Firmware installation:

  1. Install the original firmware 3.55 (OFW). If you have CFW 3.55, then we do this through the recovery mod. Some of the users installed it directly on the first version through the recovery menu and everything works great!
  2. Download the finished firmware - HERE.
  3. We update the finished firmware from a flash drive via XMB

ATTENTION! If the console constantly displays a message stating that the firmware version is the latest, flash it through the recovery menu!

5. CFW by Wutangrza

Prosha on which, according to rumors, there are no bricks. In principle, for the average user, except for 0% differences from "Waninkoko"- No. The only thing is that you will have to assemble the firmware yourself according to the manual (see below).

Firmware installation:

  1. Install the original firmware 3.55 (OFW). If you have CFW 3.55, then we do this through the recovery mod.
  2. Download the original firmware - HERE.
  3. Download the Wutangi patch - HERE.
  4. Download the program called: “bsdiff” - HERE.
  5. We write the original firmware, patch and downloaded program into one folder - (for example C:\cfw)
  6. Open the command line - Windows (press Win+R and type cmd) and go to the created folder (command: cd c:\cfw)
  7. Execute the following command - “bspatch PS3UPDAT.PUP CFW.PUP Wutangrza-3.55.patch”
  8. Rename the file “CFW.PUP” to “PS3UPDAT.PUP” and use it to update the set-top box from a flash drive via XMB
  9. Install the firmware from Geohot - “ CFW from Geohota» (we described it second)
  10. Download the package: lv2 - HERE. And install it
  11. Install the file manager you need

Error codes:

80010009 — Restore original EBOOT and SFO manually.

80029567 — This error occurs when the PKG is signed for a specific firmware, and not for the one you are installing on. Look for signed PKGs or install different firmware.

8002F997 — It is advisable to take another flash drive and format it to the FAT32 file system. Then repeat the operation.

8002B603 — It can be treated through recovery mod 4, item “Reconstruct database”

That's probably all. In the next article we will look at popular managers and how to work with them, how to record games from FTP to the console’s hard drive, as well as a detailed FAQ on all sorts of minor issues. Good luck!

The PlayStation 3 firmware significantly expands the functionality of the console: you can download games from the Internet, run additional programs, and copy games from friends.

  • After flashing the PlayStation 3 firmware, you get the opportunity launch any game downloaded from the Internet, on your console. You will have access to all the games that were released for these consoles, as any game can be found on torrents.
  • The game can be started both from a USB flash drive and from a hard drive(including from internal). You can copy games to the console either via a flash drive or via the network.
  • For the convenience of launching games and getting additional features, the console can be installed special programs: MultiMan, etc.
  • You can burn several games to your hard drive consoles and conveniently launch them from the list. No need to switch BR disks, just select the game and start.
  • I love it You can copy the game from the BR disk to internal memory, and the disk will no longer be needed after that. You can borrow a game from a friend or rental store, quickly copy it, and return the disc.

Which consoles are suitable for firmware?

To install the firmware, you must have the system version installed on your console no higher than 3.55. The current version can be viewed in the console settings - in the "System Information" section.

If the system version 3.56 or higher, then you first need to first prepare the set-top box for firmware. Accordingly, the service is more expensive (see price list below) and takes longer.

Please note that previously it was possible to flash only those consoles that were released no later than the beginning of 2011. Now In our workshops we carry out firmware for any PlayStation 3 models: Fat, Slim and Super Slim.

Previously, for set-top boxes for which downgrading the software version was not available, another hacking method was used instead of updating the firmware - . Now this method is no longer relevant, since all PS3s are flashed.


2024 gtavrl.ru.