How to charge apple watch. Only proprietary wireless charging is suitable for Apple Watch


21.05.2018 21.05.2018

WHAT IS THE ARTICLE ABOUT?

Two ways:

This article explains how to charge your Apple Watch, both using the included charger and using the Apple Watch stand.

Method 1: Use the Apple Watch charger

1. Connect the charger to a power outlet

The charging block side of the charger cable should plug into most standard electrical outlets. If the charger cable is separate from the wall end of the charger, first connect the rectangular end of the cord to the charger block port. The cord should only go in one direction.

2. Place the charger face up on a flat surface

The slightly wrinkled side of the charger disk should be facing up, and the flat side of the charger disk should be facing down on a flat, level surface.

3. Place your Apple Watch on a charger

The Apple Watch should be facing the charger. You'll notice a slight magnetic pull when you place the Watch on the charger, and the progress indicator and charge percentage will light up on the screen.

4. Leave your Apple Watch to charge

5. Place Apple Watch on your side to enable Nightstand mode

Nightstand mode uses snooze and stop signals on the buttons on Apple Watch. The screen displays the time and battery ring, as well as the date and next alarm.

Method 2: Use the Apple Watch stand

1. Buy an Apple Watch stand

Unlike watch docks, watch stands have spots that can power your Apple Watch.

2. Route the Apple Watch cord through the stand

How you do this will depend on the Apple Watch stand itself.

Some Apple Watch stands have a charger cable built into it, in which case you will need to connect the charger cable iPhone devices to the rear or side pillar.

3. Connect the charger to a power outlet

The charging block side of the charger cable should connect to most standard electrical outlets.

If the charger cable is separate from the wall end of the charger, first connect the rectangular end of the cord to the charger block port. The cord should only go in one direction.

You can also unplug the cable from your unit and then plug the rectangular end of the cable into your computer's USB port, provided it is USB port 3.0 with charging capability.

4. Place your Apple Watch back on the charger

Wherever the charging disc is located on the stand, the back of the Apple Watch must be attached to the back in order to charge.

5. Leave your Apple Watch to charge

You can track your charge progress by viewing the battery percentage at the bottom of the screen.

When the Apple Watch has "100% Charged" at the bottom of the screen, you must remove it from the charger.

6. Place your Apple Watch on your side to enable Nightstand mode

This is not possible for some Apple Watch stands. Nightstand mode uses snooze and stop signals on the buttons on Apple Watch. The screen displays the time and battery ring, as well as the date and next alarm.

Indicators at the top tell you if you're not connected to your iPhone or Wi-Fi, and if you have notifications. The charging indicator is never shown.

Brief summary

  • To charge your Apple Watch using a regular Apple Watch charger, start by connecting the charger side to the standard electrical outlet. Make sure the rectangular end of the cord is securely inserted into the unit and place the round end of the charger on a flat surface. With the charger side extended up, place back Apple Watch in a circle. You should feel a slight magnetic pull as the watch moves closer to the charger. Let the watch charge until “100% Charged” appears at the bottom of the screen.
  • Apple Watch can stay on the charger overnight if you use it in Nightstand mode.

Warnings

  • Avoid leaving your Apple Watch plugged into a charger during daily use.

In 2015 Apple company showed her vision of a “smart” watch, which was called Apple Watch. It is worth noting that it was rumors about their development that gave rise to great amount similar watches even before their release. In this article, we will look at how long a charger holds a charge, whether the battery is durable and how charging is done, we will look at the Apple Watch charging cable and what a power bank is ( power bank) for Apple Watch.

The device has a lithium-ion battery, which must have interesting feature– charging and its speed depends on the level of the battery and charge at the time of charging. Thus, we can say that the charge is not distributed evenly.

According to some studies, one percent of the charge reaches the device in an average of one minute. However, if the watch is 80 percent charged, the speed drops.

According to the same studies, from 10 percent to 80 it takes about 70 minutes, and to “get” to 100 you need to spend another 40 minutes. It is worth noting that the same data is indicated on the company’s website. It is worth charging the Apple Watch correctly in two approaches. But this is individual and depends on how much charge remains in the evening. Typically this figure is about half the charge. Thus up fully charged It takes one and a half to two hours, which in principle is not so bad.

It is recommended to charge the device as follows: half an hour in the morning, and then about 40 minutes in the evening. The numbers are approximate and sometimes vary by plus or minus 10 minutes. You can charge it when the watch has a lot of time with Apple Watches not required: during breakfast, shower, etc. If a training session is planned, the time increases accordingly.

The watch has an energy saving mode, but according to user reviews, this rarely happens even when they forgot to charge it in the morning. There are tips that can help you increase operating time; later we will reveal some of them in more detail:

  • Enable economy mode.
  • Monitor your battery charge using widgets on the main desktop with watch faces.
  • Install simpler dials.
  • Use less brightness.
  • Disable animations.
  • Set up notifications and select only the programs you need.
  • Play with the power of haptic notifications.

If the Apple Watch does not charge, then contact technical support or a service center about the problem.

Charging on Apple Watch

When the Apple device's charge is low, the creators recommend charging the watch by removing it from your hand.

In order to charge, you need to:

  • Connect the magnetic power cable and use a special case or docking station to charge the device. The Apple Watch charging cable is included, which is convenient. The charger itself must be connected to the network for it to charge.
  • Wait until the watch is fully charged. To find out that charging is on device goes or that they are charged, you need to see if there is green lightning on the screen.

Let's look at ways to save energy.

Using Eco Mode

If you turn on eco mode, the time will be displayed on the main dial, but the charge will be conserved. On the side you just need to press the button and the time will be displayed in the standard 24 hour format. It is worth remembering that in this mode the device does not sync with the iPhone and some other functions are also limited.

Enabling Eco Mode

This mode is activated when the overall charge level drops below 10%. The device notifies you about this and offers to use it. In the case when the battery is discharged almost to zero, the watch switches to this mode automatically.

In order to enable the mode yourself at any time, you must fulfill the following conditions:

  1. Swipe up on the home screen to open System Control Center.
  2. Next, select the battery charge level and press the economy mode, after which you need to confirm its choice.

Turning off eco mode

To turn off the mode, the following is required:

  1. Press and hold the side button until the Apple logo appears.
  2. Reboot the watch and possibly put it on charge.

Use the minimum required brightness

There is no standard and usual brightness adjustment in the device; it changes itself and adapts to external lighting. However, it is possible to independently choose one of 3 options automatic settings. This is done either through the watch itself or using an application on the phone. To do this you need:

  • Select "Brightness and text size".
  • Select the brightness that suits you best.

In winter, this value often reaches its minimum. In the summer or just in sunny times outdoors, you should choose those that are higher, otherwise it will be very difficult to make out what is written on it.

Disable animation

Animation not only wastes your battery, but, to be honest, it often lags. Although this was fixed in watchOS 2, problems still occur. To disable them you need to:

  • Open on iPhone app with a clock.
  • Then you need to select the item with the clock.
  • Select "Basic".
  • Go to accessibility.
  • Reduce movements to a minimum.

Use simpler watch faces

If there are colors on the dial other than black, then these places consume the most energy. It is for this reason that it is worth saving energy by using simple watch faces, where most of the screen is occupied by black elements. This is a feature of any device with an OLED display. Black parts of the screen mean those parts are turned off.

Similarly, if the dials are animated or these are bright photographs, then the charge will be spent more and faster. So the same popular dials with Mickey Mouse and Minnie Mouse are very wasteful. It is enough to select a regular dial and its various options.

It's worth playing with the power of haptic notifications

The default setting is that the watch vibrates on the user's hand. It is logical that the larger and stronger the vibration, the more charge is spent on its maintenance. To set up notifications and adjust vibration strength, you need to:

  • Open the clock app on your iPhone.
  • Then you need to select the item with the clock.
  • Select an item with sounds and tactile signals.
  • Set a lower vibration and balance it as desired.

Set up Apple Watch notifications

It’s better to place fewer ads to save not only battery power, but also nerves. It's worth noting that if notifications were initially turned off on the iPhone, they will be turned off on the watch, but this process can be adjusted as follows:

  • Open the clock app on your iPhone.
  • Then you need to select the item with the clock.
  • Select Notifications.
  • Turn off those notifications that are not of great importance.

Conclusion

As we can see from the article, the watch holds a charge for a long time. They charge quickly and the charging time reaches no more than 2 hours to 100%, that is, they do not take a long time. To increase the service life of your device, just use the tips presented above.

To call Siri say "Hey Siri" or pinch Digital Crown . Since the great and mighty does not yet fit into small body hours, you will have to conduct dialogues with the voice assistant in English. To open a program, say launch or open, then say its name.

Handoff and notifications

Like other devices, Apple Watch supports . This means you can easily launch the Weather app on your watch and then open it on your iPhone right where you left off.

In addition, Handoff works for notifications. For example, if you're viewing a message on your wrist, an icon will appear on your iPhone. social network for a quick start.

AirPlay

From Apple Watch you can stream music to your iPhone or speaker via . In the Music app press hard on the screen for the control icon to appear. Among them will be AirPlay. Tap on it and select the device on which you want to play the song.

Battery level

It's not as easy to see your battery level on Apple Watch (unless it's shown on the watch face) as it is on iPhone or iPad. Information about the remaining interest is displayed in Glance form (preview). While on the dial, swipe from bottom to top, and then scroll horizontally to find the widget with the battery level. From this menu you can also enter the watch into energy saving mode.

Screenshot

Scott Stein (CNET) is one of the lucky few. In his article, he talks about previously unknown features of the Watch.

In contact with

The Watch doesn't have any third-party watch faces

10 interchangeable watch faces Watch- a real masterpiece of design art. But you won’t find a single third-party Watch Face in the watch app store. Users of other smart watches - Pebble, Samsung Gears, devices on Android Wear— can easily download a new watch face from their repositories.

The Power Reserve function cannot be disabled without rebooting

If your battery Apple Watch already quite discharged, it will save you energy saving mode. It turns Watch into regular watch, showing only time. In this mode, the gadget will work much longer. But when you return home, charge the Watch and want to make it a smart watch again, you will have to resort to a reboot - otherwise Power Reserve cannot be turned off. It takes a minute to do everything about everything (reboot, launch Watch OS).

You can pay for purchases without Apple Pay

The QR code will help you. We reset it from iPhone to Watch via Apple app Passbook and pay. Scott did this trick with a Starbucks card - and he never needed an Apple one. payment service. An ideal option for those cases when the store does not yet accept payments via . In theory, there is nothing stopping you from doing the same with airline tickets and concert tickets.

Different bands fit different Apple Watch collections (but only one size)

If you want, you can easily buy an Apple Watch from the Sport collection and put a band from the more expensive Watch collection on it... as long as they are the same size. The strap for the 38 mm model will not fit the 42 mm Watch.

You can NOT use the Watch for calls with headphones

Alas, this is true. You can make or answer a call with Apple Watch and then pass it to . But putting on headphones or a headset, connecting them to a smartphone and making a call from the watch without taking the smartphone out of your pocket is not yet possible. Either a watch or an iPhone. Let's hope that an update to Watch OS will fix this extremely annoying problem.

Only proprietary wireless charging is suitable for Apple Watch

Scott tried charging the Watch using several wireless chargers that work with the most popular standards - Qi (pronounced "chee") and F4WP. Unfortunately, charging the watch requires an inductive Apple charger or branded accessory. In general, everything is as always.

Siri is very useful for working with Watch

“I never thought it could be so useful,” Scott writes. Long press on the Digital Crown or lift the watch and the phrase “ ” will activate voice assistant Apple. It’s very convenient to use your voice to launch applications, deal with calls, dictate messages and find something well hidden in the watch.

Tactile notification - very weak

In the literal sense of the word. Apple has gone overboard with the implementation of the principle of “do no harm” - the touch of the watch on the wrist is barely noticeable. The situation is partly fixable - just go to the sound/tactile notification settings and activate the Prominent Haptic item.

You can take screenshots of your Apple Watch screen

Incredible but true - all you have to do is press the Digital Crown and physical button below it, and the screen will light up with a flash. Watch just took a screenshot! The screenshot is sent to your iPhone's Photos app.

Watch backup stored on iPhone

If you need a reset Apple Watch to factory settings, the watch will be restored thanks to a copy of the data. It is stored in iPhone memory and includes all the data from the Watch, so you won't notice any differences. Scott tried the procedure in real life, everything worked perfectly.

Watch is compatible with other fitness gadgets

An Apple employee told the journalist that you can connect an external heart rate monitor to the watch. The connection occurs through bluetooth module. Perhaps in the future we will talk about other medical accessories, which will turn the Watch into an ideal gadget for lovers healthy image life.

Overview of the main features of Apple Watch







2024 gtavrl.ru.