How to enter the tp link router settings. TP-Link router settings: how to log into your personal account and more

A standard question that novice users ask is how to go into the settings of the TP-Link router, which they are trying to connect and configure themselves. Their main mistake is that they consider the router to be a peripheral device of the computer and it should be displayed in the device manager. This is an incorrect judgment.

The fact is that a modern WiFi router is a separate network device, which has its own processor, memory and operating system. Accordingly, go to the settings of the TP-Link router through the dispatcher Windows devices It won't work out for sure. In fact, everything here is quite simple. Simply follow the steps below.

How to find out the IP address of a router

The first step you need to start with is to find out what IP address your TP-Link router has. To do this, it is usually enough to simply turn it upside down and see what is written on the sticker:

As you can see in the example above, the IP address of the router on the local network is 192.168.1.1 . Sometimes, some models of TP-Link routers use IP.

IN Lately on modern models TP-Link routers indicate the IP address instead of Domain name devices on the network.

Usually this tplinkwifi.net, tplinklogin.net or tplinkmodem.net. This is very confusing for beginners, as they believe that this is the address of the manufacturer’s official website. But in fact, this is the domain name of the TP-Link Wi-Fi router, which was made specifically to make life easier for the user due to the fact that even the same model of modem or router, but with different firmware, may have different IP addresses.

Note: Pay attention to the contents of the fields Username And Password. This data will also be useful if you need to go into the settings of your TP-Link router. After setup, it is advisable to change the password to a more complex one for security purposes.

Access to TP-Link router settings

We have found out the address of the device on the local network. We also know the login and password to access the web configurator. Now, to go into the settings of your TP-Link router, you must first connect it with a cable to your computer or laptop. You can, of course, connect via WiFi, but to do this you need to know the Wi-Fi password.

Then launch the web Internet browser Explorer, Microsoft Edge or Google Chrome and in address bar enter the IP address of the TP-Link router, which is indicated on the sticker:

Accordingly, if the domain name is indicated on the sticker tplinkwifi.net or tplinklogin.net- you can write exactly this in the address bar:

If there are no problems with accessing the settings of the TP-Link router, then the next step will be an authorization window where you need to enter your username and password to enter the web interface.

If you are setting up a TP-Link router for the first time after purchase or after resetting it with the reset button, then enter the password from the sticker (usually admin).

On the most modern models, an automatic request will then appear to change the factory password “admin” to another, more complex one:

In the future, be sure to take into account the fact that the factory password has been changed and using it you will not be able to enter the router configuration interface.

Setting up a TP-Link router via phone

If necessary, you can go to the settings of the TP-Link router with mobile phone or tablet connected to it via WiFi. Everything is done exactly the same as on a regular PC: launch a web browser and enter the router address. The same web interface will open, but in a mobile format, oriented towards a small screen.

Another very handy tool to configure a TP-Link router via phone and tablet - this application TP-Link Tether. It is available in stores Android applications and Apple iOS.

The application for Wi-Fi routers TP-Link Tether provides a simple and intuitive user interface, designed for miniature mobile device. Despite this, it provides the same router configuration options as a full-fledged web interface. Moreover, due to the built-in technology support DLNA app allows you to watch videos on your smartphone and listen to music from a flash drive or portable disk connected to the router.

Among the interesting features of the Tether program are: interactive map clients, where you can find out who is connected to the router and from which devices.
If you have several TP-Link modems or routers on your network, then you can create a separate profile for each of them. Moreover, almost all modern models are supported.

Today in the media you can find a lot of information on setting wireless routers. They all relate to managing the router. However, the proposed materials rarely explain how to access the router settings. The purpose of this article is to provide detailed instructions on how to enter the router settings.

There is nothing complicated about this, any user can do it themselves this operation. You just need to follow the recommended steps. This way you can configure the router within a few minutes. In addition, from this article the reader will be able to learn about possible problems problems that you may encounter in your work, and also learn how to solve them.

Input data

To connect the router, you will need the router itself, a patch cord, Personal Computer or laptop. An eight-core cable is used as a patch cord " twisted pair”, which is crimped on both sides with RJ-45 clips. It should come included. For example, let's set up a TP-Link router. Products of this brand used by the majority of users in the domestic market. There really isn't much difference between manufacturers. All differences are only in the access point address, password and login. To find them out, just turn the device over and read the information written on the base of the router - IP-address, Password, Login. In most cases, the IP address is 192.168.1.1, and the password and login are admin.

Physical connection

First of all, you need to connect the router to a power source and make sure that it is in working condition. At least one light on the indicator panel should light up. One end of the patch cord must be connected to the computer's network card. The other end of the cable is connected to the router connector. Usually in the device network inputs and the outputs have different markings, it may even have different colour. To connect to the Internet, only one input is used, which has a WAN signature.

It is different from other ports, which are signed LAN. The connection to the computer must be made only through the LAN interface. You can use the LAN1 port to avoid confusion. When connecting devices, an LED lights up on the information panel of the router, which will inform the owner that the connection has occurred. Information will also appear on the computer screen indicating that it was successfully added to local network. On at this stage The user now has access to configuring the router in WEB interface mode.

Interface for configuration and management

Before entering the router setup menu, you need to decide on the WEB interface that will be used. For the WEB interface, the manufacturer recommends using standard browser Internet Explorer. It does not always display the control panel correctly, for this reason it is better to use alternative programs, such as Opera, Google Chrome, Mozilla Firefox. After opening the browser, you must enter the IP address in the address bar, which is indicated on the label on the base of the router (192.168.1.1 and 192.168.0.1), and then click “go”. In the window that appears, you need to enter the password and login, which should be written on the bottom of the router, and then press the “Login” or Enter button on the keyboard. Successful login provides the user with the router control panel.

Limitations in settings

Setting up the modem will not be possible if the network adapter does not work in automatic mode. This is evidenced by a light indicator in the tray, which is located in the lower right part of the screen next to the clock. He looks like Exclamation point in a red or yellow triangle. In this case, it is recommended to take a pen, a sheet of paper and perform it on the computer. the following actions:

— move the mouse cursor to the warning sign and click on it right click mice;
— select “Control Center” in the menu that appears;
— in the window that appears, on the left side edge, select “Change adapter settings”;
— select the desired icon from one of the proposed options; more often it is labeled as Ethernet, which has a logo with a warning. You need to right-click on it;
— select “Properties”;
— find the TCP/IPv4 inscription in the dialog box;
- click again on the “Properties” item;
— copy all the settings onto a piece of paper;
— check the box next to the “Receive automatically” menu in both fields;
- after that, click the “Ok” button and close all opening tabs.

Fighting with the network adapter

Setting up a router on a computer will not be possible if drivers are not installed on the computer. This is a completely possible scenario for the development of events after installation operating system. In this case, the Update Center will not even show the desired icon. After this you need to go to the official website of the manufacturer motherboard and download from there what you need software. It is also possible that the TCP/IPv4 inscription simply cannot be found. The user will not be able to find what he is looking for other than TCP/IPv6. To do this, there is an “Install” button in the same dialog box. Next, you need to select the “Protocol” item and in one of the proposed options, point to the desired TCP/IPv4 interface. In the event that none of the settings options network adapter If it doesn't help, you can try contacting a specialist. They will certainly be able to solve your problem.

Setting up a router: provider restrictions

Many providers provide users with their own routers to use their networks. Company administrators very often set own passwords to access the control panel. In such cases there are not many options. You can try to get access data from your provider, you can do full reset to factory settings. The second option assumes that the router settings will depend on the user. The factory login and password must be known to the owner. Before resetting the settings, you need to make sure that you are completely in control of the situation. After all, quite often the provider uses non-standard settings for connection - PPTP, PPPoE, VPN, etc. The user must have all the information to connect.

Wireless connection

If the user, before entering the router settings, discovers that there is no patch cord in the delivery kit, or there is no corresponding connector on the kit, do not despair. Most devices support access point control via wireless channel Wi-Fi. To do this, just establish a connection between the two devices. After this, you need to open the browser and repeat all operations related to entering the access point address. In cases where the router does not require authorization to access Wi-Fi, experts recommend that you still set a password to use wireless network. Otherwise, any attacker who is within the range of the router can not only reconfigure the access point for themselves, but also cause harm to all user devices.

Remote connection

It's one thing if you are setting up a TP-Link router or D-Link DIR. These inexpensive devices are limited to a WEB interface. There is no other way to access them. Owners of LinkSYS, ASUS, Zuxel, Cisco and other business-class routers can use remote connection to the device or COM-USB interface cable. Ease of management using the “console” snap-in is convenient because in a few seconds the router can be reconfigured to suit the owner’s needs.

For this purpose, scripts are created and sent to the router. Connection is quite simple. Using the Telnet and Putty programs, the user gains access to the IP address by entering a login and password for authorization. Then everything happens at the team level. They can be found in full not only in the instructions for the router, but also on the official website of the manufacturer in the “Administration” section: step-by-step setup router."

Conclusion

Surely the reader will agree that getting into the settings menu for a wireless access point is quite easy. The main thing is that both devices - a personal computer and a router - do not have manual settings. When connecting, any problem will indicate that the work network equipment has been corrected. Any user, having figured out how to enter the router settings, can easily connect to wireless point access and organize full control device.

The owner of the router should know that no matter what settings he makes, it will harm the personal computer or router physical level impossible. The most you can fear is reinstalling the operating system, as well as resetting the access point to factory settings. So you can safely perform any settings on the router.

A router (or router) is a device that allows you to easily organize a small-scale wireless network. This is convenient for providing Internet access within a residential apartment or small office. Each such device has enough a large number of settings options corresponding to certain operating modes of the device. Router manufacturers decided that the most convenient form access to the settings menu is a special web interface. Login to this web interface is carried out using the IP address 192.168.1.1 (as an option, the address 192.168.0.1 can be used) - for this you need to specify given address in the address bar of any browser. After which you will be asked to enter a password to access the device, which in turn can be changed in the settings. This standard way the easiest way to go into the settings of a router like tp-link.

The described method is so simple that you may have questions: why did we even start this whole conversation? The fact is that it is not always possible to get to the settings using the described method. Sometimes seemingly insurmountable obstacles arise on the way to this. Our story will tell you what to do in such cases. Three main reasons have been identified why the page at 192.168.1.1 cannot be opened. We will consider them in order.

Reason one: the device is not connected to the computer

In order to manipulate the router menu options, the device must be connected to the computer directly - using a cable. Those who complain about the inaccessibility of the 192.168.1.1 address and cannot log into the web interface often forget about this point.

Check that the connection between the router and computer is correct. The router's power cable must be plugged into a power outlet, and its other end must be connected to the “Power” connector of the hub. The second cable (with two latch-type connectors) should be inserted at one end into the LAN connector of the router, and the other into the input network card. The ISP wire must be connected to the connector marked “WAN” on the router. Only after this, logging into the web interface becomes possible.

Having connected all the cables as indicated above, you can try to open the browser and log in to 192.168.1.1. If this doesn't work, you can try other options.

Reason two: the router has a different IP address

It is unlikely, but possible, that the router menu is accessed at a different address than 192.168.1.1. How to determine more accurately the “coordinates” of the device. To do this, turn it over with the bottom cover facing up and look at what is written on the labels. Usually there is a link to the address and password for access. For a TP-Link router, this label looks like the picture below:

It is easy to see that the address on the label differs from the address 192.168.1.1 in one single digit. That's why they are so easy to confuse. Instead of 192.168.1.1, type 192.168.0.1 and you will probably be able to log in. Pay attention to the correctness of the numbers; it is quite possible that you simply made a mistake when entering. Accuracy, accuracy and accuracy again! It may turn out that even after this it will be impossible to log into the web interface. Rarely, but it happens, this is due to infidels network settings in Windows itself. Next we move on to discussing them.

Reason three: automatic IP and DNS retrieval is not set

For the normal functioning of the entities we need, it is necessary that in the network parameters Windows connections was exhibited automatic receipt IP addresses. There should not be manually set specific values.

• On the network tab, log in to the window "Internet Protocol Version 4 (TCP/IPv4)" by double clicking on recording of the same name from the list. Mark the values "Obtain an IP address automatically" And "Obtain DNS server address automatically".

After this, the login to the web interface should be unlocked and you should be able to log in. The input may be blocked for other reasons, for example due to equipment malfunction.

Guides on how to enter the control menu have already been compiled for almost every known router. Today we will tell you in detail and clearly show how to get into the settings on TP-Link devices(TL-WR841N, TL-WR720N, TL-WR741N, TL-WR940N, L-WR842N, TL-WR2543ND). This is quite easy to do, no more difficult than on other routers. This instruction focused on different models TP-Link, because they have almost no differences between themselves.

If you purchased a device for yourself and plan to set it up without resorting to outside help, then you should understand that you will definitely need to get into the toolbar. Setting up such routers is quite simple, the main thing is to follow all the recommendations from our portal. Even if all the settings are made by a specialist, during the operation of the device, you will probably encounter the need to change certain settings.

Situations often arise when you need to change your Wi-Fi password, find out a password you forgot, or update the firmware. And in every such situation, turning to a specialist for help is not always convenient and unprofitable from an economic point of view. You can do this yourself, without the support of a professional. The whole procedure will take a couple of minutes.

Enter TP-Link settings: 192.168.1.1, or 192.168.0.1

Key milestones:

• After the modem has been connected to the network and inserted network cable into the corresponding connectors connect with Wi-Fi router . This is done in two ways: directly WiFi networks or via cable(it is also possible to get to the settings menu even using tablet computer or a smartphone, but, nevertheless, it is more convenient to use a personal computer or laptop for these purposes). Let's now look at 2 connection options, and each item in detail using pictures.

Logging into the TP-Link settings panel when connected via network cable

The network cables required for connection must come with the device. The router must be connected to both the computer and the provider's network. On the router, the connection is made to the LAN connector (usually yellow).

• Then launch any browser and navigate to one of the unique addresses 192.168.0.1 or 192.168.1.1 . or the address of the page on which it will be available (based on a certain model router). Indicate the exact address at the bottom of the router case. In our case, the following address is written:

• After this, you will need to enter a username and password. According to standard settings, at wired connection- This admin And admin.

• In our case, we log in to the address indicated on the sticker and enter the standard login and password. If you have already changed them, you should provide new data.

• You can also access the router admin panel via 192.168.0(1).1 . Login will occur in a similar way.

• Login to the settings panel of the tp-link router (tl-wr720n) has been successfully completed.

Go to the router settings via WI-FI. Connect to TP-LINK wirelessly with or without a password

• 1 . If the router has already been configured and was set a password for the router(or simply known), then first you need to connect your modem to the broadcast network. To do this, click on the network icon, find your router and click “ Connect" and enter installed key(password). If Wi-Fi networks are not displayed, read the article.

Click next. A message will appear asking you to allow discovery of your computer within this network. Click " Yes", because as a result this network will be assigned to the one we need home group and there will be no possible problems with connection in the future.

After the network is connected and the password is entered into the browser line 192.168.1.1 or 192.168.0.1 (depending on the model) or to the address indicated on the router sticker (http) and go by pressing enter (example above in the pictures).

• 2. If you connecting for the first time(or you forgot your password and need to change it) , then in this case you can use 2 methods of connecting to the router (TP-LINK):

— As a password for the wireless network (in this case, if the modem is being configured for the first time, it will be called, for example: “TP-LINK_1234”) you can use the PIN indicated on the modem sticker. On the topic of inclusion wireless adapter and connections to WI-FI networks V .

— Or use a special system for connecting to a router via Wi-Fi without a password — WPS function. About what WPS is and how to use it in a separate article.

Hello! In almost every article in which I write about setting up routers, or about solving some problems with wireless networks, I write about how to enter the router’s control panel to change some parameters, etc. And frankly, I'm already tired of constantly writing the same thing :). So I decided to write about this in a separate article. Yes, and there is nothing to write about here, but still, many people have problems with this.

On almost all routers, even different companies, entering the settings is almost no different. But I will show using the example of TP-Link devices.

Let's first figure out how the router should be connected. Everyone (including me) recommends connecting it to a laptop at the time of setup. But, if you just want to make some settings, you can connect via a wireless network or even from a phone or tablet, nothing bad will happen.

Not when connected via Wi-Fi! Only via network cable!

This is understandable. You must be connected to your network. By cable or Wi-Fi.

Go to the control panel

Open any browser. Internet Explorer is also possible, but better than Chrome, Opera, etc.

Now attention! Take your router and look for a sticker on it that says miscellaneous information (model, version, etc.).

We need to look there IP address (usually 192.168.0.1, or 192.168.1.1) And password login to access settings. If you haven’t changed them, then these are most likely admin and admin.

As you can see, I have IP: 192.168.1.1. So we type this address in the browser, in the address bar, and go to it.

A window should appear asking for a password and login.

Enter the username and password that are written on the router. Not to be confused with the password for the Wi-Fi network!

If you have already changed this data during the setup process, then most likely you will have to change the password and login to the default ones again.

After pressing the button Send we get into the settings. Depending on model (firmware versions) and manufacturer, they may differ.

If you have any problems, be sure to read this article -