How to restore original settings on iPhone. How to reset an iPhone to factory settings quickly

Useful tips

To reset your iPhone to factory settings without a password, you need to use iTunes and a computer. Specifically, you need to erase data from the device (then, along with the rest of the information, the password will be deleted) or perform a recovery.

1. Data erasure procedure

Before starting any procedures, dump all data (photos, videos, audio and documents) onto a flash drive and remove it from the device, and also copy all contacts to the SIM card.

Important! You must have a computer with installed program iTunes, with which your iPhone was previously synchronized.

This procedure looks like this:

By using USB cable connect your iPhone to your computer.
Launch iTunes. At this stage, a window may appear in which you will need to enter a password. In this case, use the recovery procedure rather than erasing data. You can also try to use another PC/laptop, but it should also have synchronized with the iPhone before. If you are not prompted for a password, you can move on.
The program will create a backup copy. We'll have to wait a little. When this process is completed, you can continue working. Click on the “Restore iPhone...” button (or “Restore iPhone...” if the program is in English).

When prompted to select a recovery option, click Recover from iTunes copies" After that, select the most suitable copy by date and time. It is advisable to choose the one on which the settings have been reset. This may be the version that you created when you first connected after purchase.
Wait until the data is erased.

This way, the data along with the device settings will be erased. Or they will return to the state they were in before, before various problems appeared.

2. Recovery procedure

If for some reason you can’t use data erasure, here’s what you need to do:

Connect mobile device to your computer and launch iTunes with via USB cable.
Reboot your smartphone in hard mode. On latest models(8 and 8Plus) to do this, you first need to press the increase key (and immediately release it), then the volume down key, and then the screen lock button. On 7 and 7Plus, press the lock and volume down buttons at the same time. In 6s and older versions, you need to press “Home” and the lock button at the same time. After this, the iTunes branded icon will appear on the device’s screen.

At the same time, a window will appear on the computer screen in which you need to click the “Restore” button. Wait for the recovery process to complete.

After this, the device can be configured again.

3. What's the best thing to do?

It is best if any problems arise, including those related to forgotten passwords, contact support. How to do this is described.

To be specific, you will have to go to service center and ask to reset your device. You will need to say that you forgot your password.

To confirm that the smartphone is yours, take with you proof of purchase. This could be a purchase receipt, a warranty card with the owner's name on it, or something similar.

Attention! In some cases, you cannot reset your iPhone to factory settings. Read the article to the end to be sure that after resetting the settings, the phone will not require activation. I will give the necessary instructions.

If you decide to sell your iPhone or simply, for personal purposes, clear it of all photos, games, applications and other data and, as a result, return the smartphone to its factory settings, then the instructions in this lesson will help you!

You can reset your iPhone to factory settings using the built-in functions of the system. To do this, find Settings on one of the screens.

Going there we will need the Basic item.

We see two similar reset points. One of them " Reset all settings", which is responsible for resetting the settings to factory settings, but at the same time it saves important files. And the second point " Erase content and settings", in addition to resetting the settings, it also deletes all data from the iPhone.

The second option is most useful when selling a phone or in any other cases when you need to completely wipe the device and reset it to factory settings. Having decided on the type of reset, we click on it and in the drop-down menu click "" or " Reset all settings".

At the end of the reset procedure, the iPhone will restart and we will be prompted to perform initial settings: select a language, complete activation, enable or disable location services.

And of course, be extremely careful! Before you reset your iPhone to factory settings, make sure there are no important files, like photos and videos! Also check if the "Find iPhone" function is enabled (go to Settings - iCloud - Find iPhone).

With the Find My iPhone function enabled, after resetting the settings, you will need to enter your APPLE ID login and password that applies to your iCloud. If you do not have this data, then you cannot be performed full reset settings. Otherwise, you will not be able to activate the device until you enter the login and password for your APPLE ID.

Try turning off Find My iPhone! If you succeed, then you can now safely reset your iPhone to factory settings and not be afraid that it will freeze at the activation stage.

In addition to all of the above, just in case, before resetting the settings, I recommend using iTunes to make a backup copy of your device!

Hello everyone, dear readers, in today’s undoubtedly useful material, I will tell you how you can quickly and effortlessly reset your iPhone (4s – 5s) to factory settings, and delete all the information on it. You can do this, almost like any other operation in iOS, in just a few taps.

Possible reasons for resetting an iPhone (4s – 5s) to factory settings and erasing all files and data on this iPhone:

Sale. The most obvious and understandable reason. If you are going to sell your iPhone (4s - 5s), then of course you need to delete all data on it so that third parties do not get hold of it;
Poor speed. Also, one of the reasons for resetting the iPhone or iPad is its low performance and slow operating speed. In most cases, it is complete erasing iPhone or iPad and collecting settings can solve this problem.
Get rid of trash. This is such a strange reason. Sometimes, some owners just want to clean their mobile gadget iPhone (4s – 5s) from unnecessary files, in other words, from garbage.

So, for whatever reason you want to reset your iPhone or iPad and erase it, in any case, the method described below will come in handy.

Preparation

Before you clean your iPhone (4s – 5s), you need to back it up.

You never know what can go wrong, and having a backup copy on your computer, you can always return everything back:

Launch iTunes and connect your iPhone or iPad to your computer using a USB cable;
Go to the main window iTunes programs and select the “Browse” tab;
Next, you need to find the “Backups” section and in this section click on the “Make a backup copy” button;
Complete the creation process backup copy.

Restoring settings

If you just need to reset your iPhone or iPad to factory settings, without completely erasing all your data (that is, the data will be erased, but the files will remain), then you can use the instructions below:

If you need to completely clean an iPhone (4s – 5s) or iPad, then use the following instructions.

Complete wipe from device

In order to completely erase your iPhone (4s - 5s) or iPad gadget, you need to do several steps in succession. consistent actions. Don't be afraid, they are not complicated:

In principle, if you are not preparing your gadget for sale, you can stop at this stage.

If you are cleaning an iPhone or iPad for the purpose of selling, then you will need to perform one more operation - log out of your iCloud account.

This is done very simply:

Take your gadget and go to the “Settings” section;
Next, you need to go to the iCloud section;
In the window that opens, go down to the very bottom and click the “Exit” button.

That's all, in principle, all the operations that needed to be performed to clean an iPhone (4s - 5s) or iPad.

Via iTunes

You can also restore your mobile gadget using iTunes:

Launch iTunes and connect your iPhone or iPad to your computer using a USB cable;
In the main window, in the “Overview” section, find the “Restore” button and click it;
After a certain amount of time has passed (usually no more than five minutes), your gadget will be restored.

That’s all for me, if you have questions regarding the topic of today’s article, you can ask them in the comments to this entry. I will try to answer your question as accurately as possible. Also, I would be very grateful if you share this material on your social media accounts.

Restoring an iPhone is a standard return operation Apple smartphone V operational state after various failures. Unsuccessful firmware, incorrectly executed jailbreak, incorrect iOS update– if you know how to restore an iPhone, you can eliminate almost any malfunction that arises during the operation of this device.

Recovery procedure

To restore your iPhone, you need to enter recovery mode ( Recovery Mode). It's easy to do:

When the iPhone is ready for the rollback and error correction procedure, click the “Restore” button.

iTunes will find it on its own current version firmware and install it on the smartphone, returning it to the state in which it was immediately after purchase.

Working in DFU mode

If in Recovery Mode recovery iPhone does not work, you need to enter the device into DFU mode. This mode is used if there is software errors– for example, when the iPhone does not turn on. DFU mode works at the hardware level, so it helps to reset all settings even in the most difficult cases. To enter DFU mode:

Connect your device to your computer.
Press and hold Power and Home for 10 seconds.
After counting to 10, release Power while continuing to hold the Home button.

It's difficult to enter DFU mode the first time because nothing changes on the screen. If recovery mode detects itself iTunes icon, then in DFU phone It's like it won't turn on. Therefore, you need to look at the computer screen where iTunes is running. As soon as the iPhone enters DFU mode, a notification will appear in iTunes informing you that the program has detected the device in recovery mode, and you need to reset all settings and content to continue working with your smartphone.

If you need to install another firmware, hold down Shift and click “Restore”. An explorer will appear through which you need to specify the path to the previously downloaded firmware.

Recovery without a computer

If you don’t have your computer at hand, it won’t turn on, or you can’t connect your iPhone to it, then try resetting all settings through the device settings. As a result of this operation, you will get a clean smartphone without settings and user information, so be sure to make a backup before resetting. If the smartphone turns on normally:

Optionally delete user files. If the iPhone turns on, then you can troubleshoot its operation simple reset settings. In this case, the user’s personal data will remain intact.

Recovery after reset

If you need to restore your iPhone after resetting all settings and deleting content, you won’t be able to do this without a backup copy. Availability of a backup file with information stored in the device memory – main point, which you need to check before performing a reset. After iPhone rollback to the factory state, all personal data of the user is erased from it.

Creating a backup before resetting:

After the reset, the iPhone will be like new: no content or settings will remain on it. To get all the information back, you need to connect the device to your computer and restore from the backup via iTunes. Choose the latest one creating a backup, since it stores the most current information.

You can also restore all settings after a reset via iCloud, provided that you stored backups on the cloud. In this case, when setting up your iPhone, you need to select the “Restore a copy from iCloud” option and specify a suitable backup.

Problems during recovery

If after normal recovery the phone does not turn on, then it makes sense to transfer it to DFU mode and try restoring via iTunes again. This time you shouldn’t trust iTunes: download official firmware and select it in the Explorer window by holding Shift and clicking on the “Restore” button.

Sometimes the TinyUmbrella utility helps solve the problem that the smartphone does not turn on after resetting the settings via iTunes. This program has an “Exit Recovery” button. If the iPhone does not turn on after recovery, you need to select it in the TinyUmbrella window and click “Exit Recovery”.

Often, the reason why iPhone and iPad begin to perform significantly worse than usual lies in the lack of free space in the device memory. If you notice that your device has become “brooding”, often freezes, and involuntarily reboots without a command, then it’s time to “ spring cleaning" It's time to clear the device's memory of extra megabytes, or even GB of software garbage. Agree, manually deleting each application and its files is not professional.

Today I will tell you how to quickly clear your device’s memory completely or partially, as well as how to reset your iPhone to factory settings.

IN iPhone settings, iPod Touch and iPad in the “General -> Statistics” menu there is an interesting section - “Storage”. This menu contains information about how much and what the device’s memory is occupied with. Take a look, you may be very surprised that even the most harmless, at first glance, applications, such as managers social networks, can store gigabytes of useless data.

Just recently, we were contacted by an iPhone owner who was faced with the problem of insufficient memory. This resulted in the device falling into . Restoring the iPhone was not considered as a solution to the problem, because... The user did not want to lose data from the device. Fortunately, everything ended well, the person still had to restore the iPhone through iTunes, and the information was recovered from the data, the existence of which he did not even know.

This precedent encourages us to always keep the device’s memory “clean,” or at least periodically clear it of information “junk.”

You can clean your iPhone radically, i.e. completely or partially removing individual applications and their files. This is quite easy to do in several ways at once.

Ways to clean iPhone

Erase content and settings on iPhone.
Erase iPhone in iCloud.
Removing an application from the desktop.
Deleting an application in the iPhone settings in the “Storage” menu.
Removing an application from iPhone via iTunes.

The first 3 methods allow you to completely “zero” the device’s memory, as a result of which you will have a “clean” iPhone at your disposal. After cleaning, you will need to set it up again and restore the necessary data from your iTunes or iCloud backup.

The last 3 are classic, allowing you to delete individual applications and all their data manually.

ABOUT iPhone recovery We’ve already written enough, I don’t see any point in repeating ourselves. Let's try to erase content and settings on the iPhone and see what the consequences are.

How to erase content and settings on iPhone

Performed this procedure very simple, just 5 taps.

To erase content and settings on your iPhone, you don't need to connect it to a power source, but make sure the battery level is at least 25%. Otherwise, if the battery is completely discharged during the erasing process, you may need to restore the iPhone using iTunes.

!Warning
If you have a jailbroken iPhone or iPad (Pangu for example), as a result of erasing content and resetting the settings, the device will enter the “eternal apple mode”, but instead of Apple logo The process progress icon will spin on the screen. The iPhone will have to be restored using iTunes.

- Warning -
Please note that the application (program or game) is deleted along with all content. If, for example, you created files in specific program, Pages for example, and delete it, all files created in Pages will be permanently deleted. Save files created on iPhone to cloud storage(iCloud, Dropbox, etc.).

In addition to applications, free space on an iOS device they eat up photos, videos, music, contacts, notes and more important information. But there is another secret (for many) memory hog - Safari.

Works mobile web browser from Apple, like any other: when a site loads, it loads its contents into temporary storage (cache). This is done in order to speed up the loading of pages when accessing them again.

When you re-access web pages loaded into the cache, the cached data is not downloaded from the servers again, but is retrieved from the cache. On the one hand, this allows you to save on traffic and receive fast loading web pages, on the other hand, you have to put up with the fact that the cache “eats” memory.

So, if you actively use your iPhone or iPad to “surf the Internet,” be prepared for the fact that the Safari cache can take up quite a lot of memory space. This amount depends on how much data the server hosting the site has allowed to be cached. iPhone owner cannot limit this size, all that remains is to clean it periodically.

Advice: Make it a habit to clear your Safari cache periodically to improve the health of your iPhone and iPad.

How to Clear Safari Cache on iPhone

That's how it really is, it's simple. Now you know how to remove a “problematic” application from an iPhone or completely clear its memory.

If you have any difficulties or questions about the topic of the article, welcome to the comments.