How to write fractional numbers in Word. Fractions in Word - secrets of writing symbols

In MS Word, some fractions entered manually are automatically replaced with those that can be safely called correctly written. These include 1/4 , 1/2 , 3/4 , which after auto-correction take on the form ¼ , ½ , ¾ . However, fractions such as 1/3 , 2/3 , 1/5 and others like them cannot be replaced, so they must be given their proper appearance manually.

It is worth noting that the slash symbol is used to write the above-described fractions - “/” , but we all remember from school that the correct writing of fractions is one number located under another, separated by a horizontal line. In this article we will talk about each of the options for writing fractions.

The already familiar menu will help us insert a fraction correctly into Word. “Symbols”, where there are many signs and special symbols that you will not find on computer keyboard. So, to write a fractional number with a slash in Word, follow these steps:

1. Open a tab "Insert", click on the button “Symbols” and select the item there “Symbols”.

2. Click the button "Symbol", where select “Other symbols”.

3. In the window “Symbols” In chapter "Kit" select item “Number Forms”.

4. Find the desired fraction there and click on it. Click the button "Insert", after which you can close the dialog box.

5. The fraction you selected will appear on the worksheet.

Adding a fraction with a horizontal separator

If writing a fraction through a slash does not suit you (if only for the reason that fractions in the section “Symbols” not so much) or you just need to write the fraction in Word using horizontal line separating the numbers, you need to use the “Equation” section, the possibilities of which we have already written about earlier.

1. Open a tab "Insert" and select in group “Symbols” paragraph "The equation".

Note: in older versions of MS Word section "The equation" called “Formulas”.

2. Pressing the button "The equation", select item “Insert new equation”.

3. In the tab "Constructor" that appears on the control panel, click on the button "Fraction".

4. In the drop-down menu, select in the section "Simple fraction" the type of fraction you want to add - through a slash or a horizontal line.

5. The equation layout will change appearance, enter the required numerical values ​​in the empty columns.

6. Click on an empty area on the sheet to exit the equation/formula mode.

That's all, from this short article you learned how to make a fraction in Word 2007 - 2016, but for the 2003 program these instructions will also be applicable. We wish you success in your future development of Microsoft office software.

To work with text documents, tables and formulas, a program such as Word is used. This multifunctional program, which allows you to perform a lot of manipulations with text, as well as add a lot of icons and images to it. To compile text documents of a mathematical nature, it is often necessary to insert fractions into the text, and fill them out correctly. But many users have no idea how to do this and ask the question of how to write a fraction in Word. To understand this issue, it is necessary to consider the entire algorithm for carrying out this manipulation:

The simplest way to accomplish this insertion is to simply write the numerator, and after underlining, write the denominator in next line. To do this more conveniently, you need to go to the “Insert” tab and select the “Inscription” function there. The convenience of this manipulation lies in the fact that in this way you can set the spacing between lines; to do this, go to the “Format” menu and select the “Paragraph” option there; this measure will allow you to present the fraction naturally and visually.

The next way to create a fraction in a Word document of the seventh or tenth edition is the following algorithm:

• you need to open the document in which the changes will take place
• then place the cursor where the fraction will be
• go to the "Insert" menu and select the "Formula" option there
• In this tab, select the required type of formula

If you need to insert a fraction into a document created in Word version 3, you should proceed according to this principle:

• need to be found in dashboard a special arrow, when clicked, the active “Toolbar Options” window will open
• you need to left-click on it and select “Add or remove buttons” there
• then select the "Settings" tab:
• after that you need to go to the active “Commands” window
• Select the "Insert" option in the left column
• find the "Formula Editor" function there:
• In the “Formula Editor”, left-click the inscription and drag it to the desired location in the control panel:
• on final stage tediously click on the “Formula Editor” icon that appears
• in the active window that opens, select “Template of fractions and radicals” and select the desired appearance of the fraction
• you need to insert your numbers into the shaded frame
• after that click on empty space screen and the fraction is ready.

You should consider a similar situation in Word version seven, it is slightly different from the one described above.

1. So, first you need to open the document in which you are going to work and hover your mouse over the place where the fraction will appear.
2. After this, you need to go to the “Insert” tab and select the “Formula” option there:
3. A new active “Designer” window will open and it contains a large number of mathematical symbols and formulas into which values ​​can be substituted. There you need to find “Fraction” and click on it with the left mouse button:
4. Windows with different signs will appear and there we select the fraction we need:
5. After you do this in the document, a fraction will appear in the place where the cursor was.
6. Now you need to fill it with values, that is, enter the numerator and denominator. In addition, you can add one more fraction to both the denominator and numerator:

Word provides a wide range of functionality for working with mathematical documents and, if desired, you can complete a task of any complexity. So Word suggests not only entering fractions into the text, but also entire ready-made formulas, where you just need to substitute the values. Therefore, you should not neglect these functions and add fractions manually in finished work, you just need to study the program’s operation a little more carefully.

In general, we can say that there is nothing complicated about this issue. You just need to pay attention and take your time. It should be noted that the Word program, with each new version filled with so many different necessary functions that its popularity has not waned for many years. Therefore, if you have difficulties working in documents, do not despair, you just need to carefully study the functionality of this wonderful program.

Editing text documents raises many questions among users. Even an advanced user cannot avoid them, because it is impossible to know everything. Therefore, sometimes you have to study certain secrets. Below we will try to figure out how to write a fraction on the keyboard and more. All manipulations will be considered using a text example Microsoft editor Word. The majority of users work with it.

Inserting formulas

How to write a fraction sign? There is no corresponding symbol on the keyboard. And therefore, users face certain problems in the process of bringing their ideas to life.

In MS Office, users are able to work with the editor mathematical formulas. They allow you to quickly and without the help of a keyboard panel set fractions and edit them at your discretion.

In order to insert a formula in Word with fractions, you will need:

1. Go to the mentioned text editor.
2. Open the "Insert" section.
3. Click on "Object".
4. Select option 3.0.
5. In the menu that appears, select the type of fraction. To do this, just carefully study the proposed options.
6. Left-click on one or another fraction symbol.
7. Edit the resulting formula.

This is the simplest option. But how to write a fraction on the keyboard? And what other options are there?

Keyboard to help: standard solution

It all depends on the personal preferences of each user. Sometimes the element being studied is understood as a slash ("/"). It allows you to separate characters and numbers.

1. Go to
2. Click on the button located to the right of the letter "Y".

But that is not all. How to write a fraction sign on the keyboard? There are a number of other tips to help you cope with the task. Which ones?

Keyboard shortcut and Russian layout

For example, in Word you don’t have to switch the keyboard layout to English to use “slash”. How then should we proceed?

The algorithm of actions will be approximately as follows:

1. Go to a text editor and place the cursor in one place or another.
2. Press "Shift".
3. While holding down the corresponding button, click on the key to the right of "E".

Important: if you do not press Shift, the user will put a "slash" in reverse side. This symbol is never used as a fraction.

Text formatting

How to write a fraction on the keyboard? The answer to this question should no longer confuse the user. However, we haven't covered everything yet. possible options.

To make fractions possible when editing text, it is recommended to use the font options. What exactly are we talking about?

So that you don’t have to think long about how to put a fraction on the keyboard, you can:

1. Type the text and add a slash using any method convenient for the user.
2. Highlight the piece of information before the "fraction". The one that will “go” into the numerator.
3. Click on RMB and select the transition to the "Font" menu.
4. Place a check mark next to the caption "Superscript".
5. Select the “denominator”.
6. Go to the menu item "Format" - "Font".
7. Check the box next to the "Interlinear" section.
8. Save adjustments.

After these manipulations, the user will be able to see something similar to a fraction. How to put it on the keyboard? The answer to this question will no longer bother users.

About the special insert

Sometimes it turns out that the user needs to work with specific fractions. Let's say 1/2 or 1/4. Under such circumstances, there is no point in thinking about how to write a fraction on the keyboard. Why?

In Word you can insert special characters. And there are also some fractional values ​​among the corresponding list. This cannot be neglected.

The process looks like this step by step:

1. Open Word.
2. Visit the menu item "Insert" - "Symbol".
3. Find the fraction in the window that appears and double-click on it.

Instructions for inserting fractions in Word

To work with text documents, tables and formulas, a program such as Word is used. This is a multifunctional program that allows you to perform many manipulations with text, as well as add many icons and images to it. To compose text documents of a mathematical nature, it is often necessary to insert fractions into the text, and fill them out correctly. But many users have no idea how to do this and ask the question of how to write a fraction in Word. To understand this issue, it is necessary to consider the entire algorithm for carrying out this manipulation:

The simplest way to implement this insertion is to simply write the numerator, and then write the denominator on the next line after underlining. To do this more conveniently, you need to go to the “Insert” tab and select the “Inscription” function there. The convenience of this manipulation lies in the fact that in this way you can set the spacing between lines; to do this, go to the “Format” menu and select the “Paragraph” option there; this measure will allow you to present the fraction naturally and visually.

The next way to create a fraction in a Word document of the seventh or tenth edition is the following algorithm:

• you need to open the document in which the changes will take place
• then place the cursor where the fraction will be
• go to the "Insert" menu and select the "Formula" option there
• In this tab, select the required type of formula

If you need to insert a fraction into a document created in Word version 3, you should proceed according to this principle:

• you need to find a special arrow in the dashboard, when you click on it, the active “Toolbar Options” window will open
• you need to left-click on it and select “Add or remove buttons” there
• then select the "Settings" tab:
• after that you need to go to the active “Commands” window
• Select the "Insert" option in the left column
• find the "Formula Editor" function there:
• In the “Formula Editor”, left-click the inscription and drag it to the desired location in the control panel:
• At the final stage, it’s tedious to click on the “Formula Editor” icon that appears.
• in the active window that opens, select “Template of fractions and radicals” and select the desired appearance of the fraction
• you need to insert your numbers into the shaded frame
• After that, click in an empty space on the screen and the fraction is ready.

You should consider a similar situation in Word version seven, it is slightly different from the one described above.

1. So, first you need to open the document in which you are going to work and hover your mouse over the place where the fraction will appear.
2. After this, you need to go to the “Insert” tab and select the “Formula” option there:
3. A new active “Designer” window will open and it contains a large number of mathematical symbols and formulas into which you can substitute values. There you need to find “Fraction” and click on it with the left mouse button:
4. Windows with different signs will appear and there we select the fraction we need:
5. After you do this in the document, a fraction will appear in the place where the cursor was.
6. Now you need to fill it with values, that is, enter the numerator and denominator. In addition, you can add one more fraction to both the denominator and numerator:

Word provides a wide range of functionality for working with mathematical documents and, if desired, you can complete a task of any complexity. So Word suggests not only entering fractions into the text, but also entire ready-made formulas, where you just need to substitute the values. Therefore, you should not neglect these functions and add fractions manually in the finished work; you just need to study the program’s operation a little more carefully.

In general, we can say that there is nothing complicated about this issue. You just need to pay attention and take your time. It should be noted that the Word program, with each new version, is filled with various much-needed functions that its popularity has not fallen for many years. Therefore, if you have difficulties working in documents, do not despair, you just need to carefully study the functionality of this wonderful program.

Instructions

Simple fractions can be printed by inserting special characters to represent certain fractions. To do this, select the menu items "Insert-Symbol". In the sign that appears with a set of symbols, select the sign of the desired fraction (if it is there). Unfortunately, the list of available fraction symbols is quite limited in standard fonts with the following values: ?, ?, ?, ?, ?, ?, ?, ?, ?. The set of ready-made fractions may vary depending on the font selected in the Font field. However, if some special font provides big choice fractions, this does not mean that these symbols will be displayed the same way on another.

To print any ordinary fraction, type its numerator, then the oblique sign (/), and then the denominator of the fraction. To give such a fraction a more natural look, highlight the numerator, click right button mouse, select from the drop-down context menu line “Font” and check the box with the word “superscript”. Perform a similar operation with the denominator of the fraction. Just put a tick in front of the word “subscript”.

Type fraction possible by combining vertical shifting and decreasing font size. Write the numerator and denominator of the common fraction by dividing them with a scythe. Now select the numerator and select “Font” in the context (or main) menu. Specify a font size that is about a third smaller than the default one (for example, 8 pt instead of 12 pt). Then go to the “Spacing” tab and in the “Offset” line select the “Up” value. The offset value can be left at its default value. After that, do a similar procedure with the denominator. Only "Offset" needs to be selected "Down".

If a fraction sign (horizontal bar) is used in complex mathematical expressions, then it is better to print it (like the entire expression) using . To do this, select the following menu items sequentially: “Insert – Object – Microsoft Equation 3.0". After this, the mathematical formula editor will launch, where you can type any fraction. If the "Microsoft Equation 3.0" object does not appear in the drop-down menu, it means that when installing Word this option was not installed. To do this, insert the disc with Word program the same version and run the installation program. Check the Microsoft Equation 3.0 box and after installation this feature will become available. IN Microsoft Word 2007 formula editor is already built into the taskbar.

Print complex fraction in Word there is another way. Select the following items: "Insert - Field - Formula - Eq". Now select the fraction icon in the editor that opens.

Type fraction You can use a special “symbolic” formula editor. To do this, press the key combination Ctrl+F9. Then, inside the appeared curly braces type: eq f(1;2) and press F9. The result will be one half, recorded in a classic, “vertical” form. To get the right fraction, instead of one, type the numerator, and instead of two, type the denominator of the fraction. By the way, received fraction in the future it will be possible to edit it using the “regular” formula editor.

As a last resort, the fraction symbol () can be drawn and . To do this, expand the drawing panel, select the line tool and draw a suitable horizontal line. To “add” the numerator and denominator to the resulting line, in the “text wrapping” option settings you must select “before the text” or “behind the text”.

note

Entering a fraction can be significantly speeded up if you use a special field: “Sign code”. for example, to get "one second", enter "00BD" (or "00bd") in this field.

Helpful advice

All options are designed for Word 2003 (XP). All other versions differ slightly.

Sources:

• How does a fraction decrease by a fraction?
• Making fractions at home

Instructions

Click once on the “Insert” menu item, then select “Symbol”. This is one of the most simple ways inserts fractions into the text. It consists in the following. The set of ready-made symbols includes fractions. Their number, as a rule, is small, but if you need to write ½ in the text rather than 1/2, then this option will be the most optimal for you. In addition, the number of fraction characters may depend on the font. For example, for the Times New Roman font there are slightly fewer fractions than for the same Arial. Vary the fonts to find the one that suits you best best option, when it comes to simple expressions.

Click on the “Insert” menu item and select the “Object” sub-item. A window will appear in front of you with a list of possible objects to insert. Choose among them Microsoft Equation 3.0. This app will help you type fractions. And not only fractions, but also complex mathematical expressions containing various trigonometric functions and other elements. Double-click on this object with the left mouse button. A window will appear in front of you containing many symbols.

To print a fraction, select the symbol representing a fraction with an empty numerator and denominator. Click on it once with the left mouse button. will appear extra menu, clarifying the scheme itself fractions. There may be several options. Select the one that suits you best and click on it once with the left mouse button.

Enter in numerator and denominator fractions all the necessary data. This will happen directly on the document sheet. The fraction will be inserted a separate object, which, if necessary, can be moved to any place in the document. You can print multi-story fractions. To do this, place another fraction in the numerator or denominator (as you need), which can be selected in the window of the same application.

Video on the topic

Burning an image or inscription on the surface of an ordinary “blank” - good way avoid fiddling with covers or stickers. In order to use this convenient function, you should have: a writing drive with the LightScribe function (they cost a little more than regular ones), a blank coated with a LightScribe layer (the cost is the same as a regular one) and installed program, designed to work with this technology.

You will need

• Drive with LightScribe; “blank” covered with a layer of LightScribe; a program designed to work with LightScribe technology

Instructions

The most convenient in the list of such programs is Nero for burning discs. All versions of this program, starting with, have the LabelFlash function, with which you can apply images to disk. When you launch, you will see a layout on which you need to overlay the image or inscription you need. After posting the image, select quality. High takes the most time, take this into account when clicking “Ok”.

If Nero programs If you don’t have one, then you can use others, for example Droppix. Before that, she will need LightScribe and she can get to work. First, using any editor, remove the color from the photo you need and save the photo. Then open it Droppix (File - open) and adjust the size to the disk. Keep in mind that there will be a hole in the center, so place the image accordingly.

The program allows you to preview and print level. It is better to choose a darker option - this way the picture will be more contrasty and clearer. Once you are finished, click “Burn”. Now select the burner drive (if you have several of them) and the program will begin to print the image. Among other things, remember that the “blank” needs to be inserted upward, that is, with the working surface facing up.

Video on the topic

Sources:

• How to make a cover for a disc, how to print on discs/printing

Fraction is one of the elements of the formulas for entering into word processor Word has a Microsoft Equation tool. Using it, you can enter any complex mathematical or physical formulas, equations and other elements, including Special symbols.

Instructions

To launch the Microsoft Equation tool, you need to go to: “Insert” -> “Object”, in the dialog box that opens, on the first tab from the list you need to select Microsoft Equation and click “Ok” or double-click on the selected item. After launching the editor, a toolbar will open in front of you and an input field will be displayed: a dotted rectangle. The toolbar is divided into sections, each of which contains a set of action symbols or expressions. When you click on one of the sections, a list of tools located in it will expand. From the list that opens, select the desired symbol and click on it. Once selected, the specified symbol will appear in the selected rectangle in the document.

The section containing elements for writing fractions is located in the second line of the toolbar. When you hover your mouse over it, you will see the tooltip “Patterns of Fractions and Radicals”. Click the section once and expand the list. The drop-down menu contains templates for horizontal and oblique fractions. From the options that appear, you can choose the one that suits your task. Click on the desired option. After clicking, a fraction symbol and places for entering the numerator and denominator, framed by a dotted line, will appear in the input field that opens in the document. The default cursor is automatically placed in the numerator input field. Enter the numerator. In addition to numbers, you can also enter symbols, letters or action signs. They can be entered either from the keyboard or from the corresponding sections of the Microsoft Equation toolbar. After the numerator, press the TAB key to move to the denominator. You can also go by clicking in the field to enter the denominator. As soon as