How to remove digital password from iPhone 5s. Unlocking Apple equipment: iPhone

All tips

A lock password is a preventive measure that protects your iPhone or iPad from being hacked. Use it to protect personal data from unauthorized access. From the article below the cut you will learn: what is a lock password, how to set a password longer than 4 characters, when the iPhone is temporarily locked, how to reset the counter of incorrect attempts and how to enable and remove the lock password on iPhone, iPod Touch and iPad. Beginners will find it useful, advanced users will find the material useful for reference.

How does locking an iPhone with a passcode work?

When you enable an iPhone or iPad lock with a password, the device's Home Screen is completely locked. When you press the “Home” and “Power” buttons, a lock screen known as “Lock Screen” appears on the device’s display.

All you can see on the lock screen is the status bar (at the very top), date and time. Unlocking an iPhone by swiping right at the bottom of the screen brings up a form to enter a lock password (4-digit by default). And in order to go to the desktop and access the device’s capabilities, you must enter the correct set of characters.

On the lock screen, you can activate the “Control Center” (enabled in the settings in the menu of the same name), this will allow you to turn on Wi-Fi and connect to known wireless networks automatically (without unlocking the device), launch useful utilities in everyday life: flashlight, timer, calculator, camera and the AirDrop function.

A vulnerability was found in iOS 7.0-7.0.4 that made it possible to bypass the lock password and call any application running in the background through the control center on the locked screen.

Simple iPhone Lock Password

A simple password consists of only 4 Arabic digits; letters and special characters are not available. It turns out that there can be 10,000 options for such a set. Not a few, isn’t it? And if you take into account periodic time blocks for 1, 5, 15 and 60 minutes, it will take a very long time in case of incorrect attempts.

Complex lock password

In some places, Apple pays great attention to the protection of personal data, as well as the devices themselves, from hacking. With one swipe of a finger, a simple 4-digit code turns into a real nightmare for a hacker. It’s easier to sell a locked device for scrap than to find such a password.

In iPhone settings, in the “Touch ID and Passcode” menu - for devices with Touch ID and Passcode - for all others, turn off the "Simple Passcode" switch and you will be able to lock the device with an unlimited-length password consisting of numbers, uppercase and lowercase letters, and also special characters. For fun, count the length of a complex password and provide the information in the comments. Thank you!

The number of options for such a password is hard to imagine and there is no need for it, a 4-digit one is enough. Moreover, it is easy to forget a complex password and to unlock the iPhone you will need it and lose all the contents.

Temporarily lock your iPhone when you enter the wrong password

If there are 6 incorrect attempts to enter the lock password, the device is temporarily blocked for 1 minute: no actions are available except emergency calls, including re-trying to enter the password.

Each subsequent incorrect attempt increases the iPhone lock time by 5, 15 and 60 minutes, and as soon as you enter the wrong password for the 10th time in a row, the device will be permanently locked. Until the iPhone is connected to a computer that is allowed access to the device, entering the password will not be possible.

How to reset the counter for invalid lock password attempts

You can reset your iPhone's temporary lock when you enter the wrong password. If you have access to which the device has been synced at least once, this is easy to do.

If you connect your iPhone to a computer with which it has not previously synchronized, you will not be able to reset the counter; to do this, you must allow the computer to access the contents of the iPhone.

You need to confirm permission on the device itself, but the problem is that you can’t unlock it and, accordingly, you can’t authorize it.

Calculating the time to manually brute force a simple iPhone lock password

Let's assume that the iOS device is not permanently blocked on the 10th incorrect attempt. To manually search through 10,000 options you will need:

Every 9 options: 1+5+15+60=81 minutes.
10,000 options: (10,000/9)*81~90,000 minutes, or 90,000/60=1500 hours, or 1500/24=62.5 days. And this does not include the time spent on input.

As you can see, even a 4-digit code is not easy to find. Once again, it is unnecessary and even dangerous to activate a complex lock password on your iPhone.

How to Enable iPhone Lock Passcode

To set a password:

When the password is active, access to the Touch ID & Password menu is blocked.

As an additional protection in the same menu, it is provided for 10 incorrect attempts. Turn on the “Erase Data” switch if you are sure that no one else will try to unlock your iPhone.

How to disable the lock password on iPhone

If you have access to the device settings and for some reason you want to disable password protection (for example, you give the device to a child for a while), you can do this there in Settings in the “Touch ID and password” menu.

Tap on “Turn off password” and confirm your decision. Then enter your current password and decide what to do with the iCloud Keychain (KeyChain): turn it off on the device and delete all passwords, or continue to use it. Personally, I always select the “Continue with keychain” option, then I won’t need to re-enable the keychain in the iCloud settings.

As you can see, a few simple steps and your iPhone, iPod Touch or iPad are securely protected. It is almost impossible to find a simple 4-digit password by manual brute force, so use the iOS device lock carefully. If you forgot the security code or it was installed without your knowledge (the same child) - .

I invite you to comment - ask questions, complement, criticize.

Modern smartphone users often set a password on them for their security and to prevent access to personal data. But such a good goal can turn into trouble - the code is easily forgotten. Therefore, it is important to learn ways to unlock your iPhone if you forgot your password, so that you can always be in touch with your friends.

What to do if you forgot your iPhone password

Situations when a person forgets the password for a smartphone are not uncommon, although they may seem a little funny. But this problem happens, and therefore the question of how to unlock an iPhone if you forgot the password remains relevant for millions of users. You can try to reset the codes using different methods: enter the code through the counter of incorrect attempts, restore the gadget through locking or iTunes. You can do this yourself or seek the paid help of professionals.

Resetting the failed attempt counter

To ensure the security of the device, the gadget can lock itself permanently after the sixth attempt to enter the password incorrectly. In this case, it will give you the information “iPhone is disconnected, connect to iTunes.” In this case, the block can be removed by resetting the counter of incorrect attempts. The steps to remove the password from an iPhone are only possible if it is synchronized with the computer and authorized with iTunes:

Connect your phone to your computer via cable and turn on iTunes. If Wi-Fi is turned off on the device, synchronization with the computer through it will not occur.
Wait a little time for the gadget to be recognized by the program.
In the menu, select “Devices”, click “Sync with”, select your phone. Similarly, you can navigate this item through “Tabs”, “Browse”.
When synchronization begins, the counter of incorrect attempts will be reset to zero, and you will be able to continue entering your password.
When you try to turn the gadget off and on, or force it to reboot, the counter will not reset - keep this in mind.

Reset iPhone Lock Password

Another situation may be the question of how to unlock an iPhone. This could be a complete reset of the unlock password or sending the code to the backup email specified in the settings. In the case of a full reset, you first need to transfer all information from the device to a spare version or create a backup copy. You can try to manually sort through combinations of numbers, but to do this, the “Find iPhone” feature on the gadget must be turned on, and the search itself will take a lot of time. Information on how to reset a password on an iPhone may consist of checking the following data:

Make sure the activation lock function is active.
Availability of a synchronized computer, authorization with iTunes.
Enter your Apple ID details and code.
Switching the phone to DFU mode: turn off the phone, simultaneously hold down the "Home" and "Power" buttons, hold them for 10 to 20 seconds, after 10 seconds release the "Power" button, and hold the "Home" button until the computer sees the device in selected mode.

How to restore an iPhone if you forgot your password

After synchronizing your phone with your computer, you will need to restore it. This is an important point in the information on how to unlock iPhone 4 if you forgot the password. The methods for switching the phone to the desired mode are discussed above, but you can bypass the official blocking in this way: reflash the gadget. The blocking can be removed either through iTunes or using iCloud. Both options are applicable to restoration and are recommended by the official representative of the brand.

If errors occur in the unlocking situation, then a way out of the situation may be to read the forums, where you can find answers to any questions that may arise. Experienced users share secrets with beginners, which often turn out to be little tricks to deceive the system and return the device to its original state. So, there is advice to initially install the latest firmware version, and then restore the iPhone - it takes less time and is suitable for users with slow Internet.

Via iTunes

After resetting your iPhone unlock password by putting the device into DFU mode, continue to do the following:

Connect your phone via cable to your computer to sync with iTunes.
The iTunes program will detect your gadget, displaying the information: “iTunes has detected an iPhone in recovery mode. This iPhone must be restored before using it with iTunes."
Click "OK" button on your computer, select "Restore iPhone".
Depending on the firmware version, messages may appear about automatically checking for updates and restoring factory settings; you must agree to them by clicking the “Check” and “Restore and Update” buttons.
If the messages do not appear, then we agree with the selected firmware version and wait for it to be installed.
After installing the version, the “Set up iPhone” window will appear on the screen; you need to select “Set up as a new iPhone” and enter a new password.

How to unlock an iPhone via iCloud

Unlocking your phone using iCloud is possible only if you meet the following mandatory requirements:

Find My iPhone feature enabled.
Enabled Wi-Fi or available Internet via cellular connection.
The screen is not viewable due to the requested code.

The following steps will help answer the question of how to unlock iPhone 5:

Go to iCloud, make sure that in the “All Devices” tab, when you select “Find iPhone”, the name of the required gadget is green and the status shows “Online”.
Click on the device name, selecting “Erase iPhone”, in the pop-up window click “Erase” again.
Enter your Apple ID code and phone number, click “Done.”
The screen will go dark, but the logo will be displayed and the status bar will be displayed. When it reaches the end, you can return to the original settings.

Today, one of the most popular smartphones in the world is the iPhone. He achieved such success due to his high quality, incredible performance, a huge number of different capabilities and ease of operation. Despite this, not all iPhone owners know how to use its capabilities to the maximum, and some do not even know how to perform even the most basic operations, one of which is locking the iPhone display. Quite often, happy iPhone owners ask the question of how to properly and quickly lock a smartphone, as well as what needs to be done for this. Below in the text several options for answers to this question will be presented.

Using the lock key

Of course, the simplest and most popular way in which you can lock your phone is the method that involves using a specially designed button. We are talking about a key that is located on the top panel. To use it to block an iPhone, the subscriber only needs to press this button once. As a result, the screen will go dark and the iPhone will go into lock mode. To unlock your smartphone, you just need to repeat the same operation, as well as enter a graphic or digital key, if one is available and connected on your mobile device.

Locking with Assistive Touch

If you don’t like the first method, or for some reason you cannot use it, for example, the power button is out of order and does not perform any operations, or you do not want to use it, you can block the smartphone and another option. Some users even like it better, moreover, they use it with absolutely normal operation of the shutdown button.

To carry out the operation in question using this method, the subscriber must first activate the above-mentioned program. You can do this in the following way:

First of all, you need to go to “Settings” on your mobile device.
After this, you need to go to the section called “Basic”.
Then the subscriber should open the “Universal Access” group.
Click on the “Assistive Touch” line.

The result of completing the presented steps will be that a small button is formed on the mobile phone screen, which is located on top of the desktop, and can also be absolutely easily moved to any side and corner of the display.

To lock your iPhone using this program you will need:

Click on the button that appears on the screen.
In the Assistive Touch menu that opens, select the required item that will help you carry out the necessary procedure.

In addition, using the menu that opens, the subscriber can also adjust the volume of the smartphone, click on the “Home” button and a number of other operations. This helps a lot in moments when the above-mentioned physical buttons stop functioning fully.

Blocking a stolen smartphone

The developers of the world-famous Apple products are concerned about their customers, as well as their safety in case of phone theft. If you become a victim of pickpockets and lose your iPhone, you need to block it as quickly as possible, and then contact local law enforcement for help.

Each owner of an Apple smartphone can block it from a distance on their own. In addition, you can also erase personal information, or leave an SMS with your coordinates if it happens that the iPhone is lost.

To carry out the blocking operation, the subscriber must use a program called ". This can be done through iCloud, or through another iOS-based device.

If your iPhone is stolen, you need to activate the lost mode as soon as possible. This can be done using the following sequential steps:

First you need to visit the iCloud website and enter your own Apple ID and password combination in the required window.
After this, you need to go to the Find iPhone program.
Then the location of the smartphone is determined. The subscriber can see the location of the gadget on the map in the form of a green circle that must be clicked.
In the window that appears, click on the letter “i”, and then, in the new window that pops up, you need to click on the function called “Lost Mode”.

After this, you will need to enter the previously set smartphone password, but if you didn’t have one, you will need to come up with and remember the password, since with its help you will then unlock the missing phone. Then you need to write a number, which will then appear on the screen of the missing apple phone. This number will serve as a contact for establishing communication with you.

A missing smartphone will be instantly blocked if it is connected to the World Wide Web; if not, blocking will occur the first time it connects to the World Wide Web.

Often, clients turn to services to remove the password from their iPhone. On the topic of how to do this, you will probably find a lot of resources on the Internet, but they do not say that after your attempt the device can be locked, and it is very easy for a non-professional to lose data. The advice that is mainly given on network forums is the following: save data via backup or iCloud, execute, and for a locked device in DFU mode. Are these recommendations unclear to you? This is understandable, so we advise you to immediately contact professionals who will quickly and carefully remove the code from your phone without damaging its data. All necessary service contacts are already on the website.

Is it possible to remove the password from an iPhone yourself?

If you suddenly forgot your phone code, naturally, you want to know: is it possible to remove the password from your iPhone yourself. Of course, sometimes following advice gleaned from the Internet can help in carrying out this operation. But in the vast majority of cases, you risk harming your device. Believe me, it is better to entrust this procedure to a service specialist, who will not only carry it out quickly, but will also solve potential software problems along the way, and the prices for execution are quite adequate, which is also important.