How to rollback nvidia driver. How to roll back an NVIDIA video card driver

Drivers on a computer help components work correctly, not create discomfort, and adapt to other components in a timely manner. In this regard, drivers are updated as often as the developer is able to release them. This is due to the rapid pace of technology development: if your driver does not support all modern devices, then the component becomes useless. It often happens that the driver needs to be rolled back. In this article you will learn how to do this.

Why roll back the driver?

Imagine that after the next update of the video card driver, the image suddenly became faded, blurry and does not show some elements of the screen at all. Of course, the problem can lie anywhere, but it is more logical to associate this with a driver update. Your component may be too old or worn out, or something on your computer is creating a conflict between another utility and the new driver.

To avoid a recurrence of this situation, it is better to roll back the driver to its original state and not update it in the future.

How to return the old driver

You don't need a driver to roll back third party software. Everything can be done under conditions Windows environment However, rollbacks and driver removal are quite dangerous if the procedure is performed by an inexperienced user. Follow the instructions exactly and do not deviate from them.

• Go to the “Control Panel” field through the Start menu.

• Set the sorting of sections on the page “by Category”. This can be done in the upper right corner of the window.
• Just click on the blue triangle and set the value you need.
• After that, find and select the “Hardware and Sound” section.

• In the next window, you need to click on the “Device Manager” subsection. If a new window does not open, then most likely you are in a guest account.
• Log out and go to the administrative office account, repeating all the points again.

• In Device Manager, notice the small triangles on the left side of the window. Click on one of them to expand the subsection and look at the device drivers.
• Let's assume you need to roll back the driver on your video card, which is what happens most often.

• Right-click on your video card and select the “Properties” section. Do not confuse discrete and integrated video cards, since new drivers are most often installed on discrete ones.

• In the small window that appears, find the “Driver” tab. Among the many buttons, find “Disable”, and next to it the line “If the device does not work after updating the driver...”.
• Click this button once. Agree with the system warning. To start the process, you will need to restart your computer, in some cases you have to do it two or three times.
• If you do not have a “Disable” button in this window, then you have not yet updated this driver at all.

If rolling back doesn't help

The rollback can also be done completely manually: remove your current driver completely, download the old version of the driver from the official website of the component and install it. This will work if the previous point did not help you.

Go to the same window, but now click on the “Delete” button at the very bottom. This may also require a system reboot.

After that, go to the official website of the developer and find the one you need old driver. Save it to your computer and then install it.

Remember this component and do not update it in the future if you are absolutely sure that the new driver has had a detrimental effect on the system. Better wait for another latest driver version and try it.

So many Windows users 10 encountered a problem unstable work Wi-Fi connections. For someone, after installing or updating to Windows 10, Wi-Fi adapter did not appear in the system at all, and it is impossible to connect to the wireless network. And if wireless connection Yes, it doesn't always work as it should. The laptop either does not connect to Wi-Fi networks, or connects for a while, and with errors. Also, after installing new updates in Windows 10, many people had problems with .

Almost always, the problems described above arise due to incorrect operation Wi-Fi drivers adapter. It is either not suitable for Windows 10, or even if it is suitable, it is unstable. Therefore, if you have problems with your wireless connection, I always advise you to try first. But the problem is that not all manufacturers have already released new drivers for Windows 10. And for some laptop models (adapters), such drivers no longer appear. Therefore, if the update (reinstallation) does not help, you can try removing the adapter from the system (it will be installed again), or replace the driver from the list of already installed ones. I wrote about this in an article.

And in this article I will show you another way in which you can revive your laptop's wireless adapter. This is a driver rollback. The only condition is that the driver must be installed. This method will help if you have any problems connecting to wireless networks, errors in the Internet connection, or when Wi-Fi distribution from a laptop.

Rolling back the Wireless adapter driver. Restoring the old driver version

You may have only one version of the driver installed, and you won't be able to roll back. Let's check it now.

First we need to launch Device Manager. Do it in a way that is convenient for you. You can simply open the search and write “device manager”, select the required item in the search results.

Next, open the “Wireless Adapters” tab, look for our Wi-Fi adapter there, right-click on it and select “Properties”. In the name wireless adapter most likely there will be the words "Wireless", "WLAN", "Intel", "Broadcom", "Qualcomm". For example, I have USB WiFi TP-Link adapter. That's why it's called that.

Select one of the reasons for returning to old version driver and click "Yes".

The system will think a little, the information in the device manager will be updated, and the driver will be restored. Restart your computer and check if it works wireless connection. If problems persist, then look at the articles with other tips on the page:.

And if you still can’t solve the problem that arose, then describe it in detail in the comments. I'll try to recommend something. Best wishes!

Good day everyone!

When searching for and updating drivers, it happens that the new driver begins to work unstable: it causes conflicts, errors, does not perform some functions correctly, etc.

In this case, it is recommended to roll back to the old one previous driver, who previously worked at normal mode. I note that even if you did not driver backup(or restore points in Windows) - anyway, in most cases, you can restore everything (since Windows does not remove the old driver, and it remains in the list of available ones on the PC) .

In this article I will show you with several examples how this can be done.

Addition!

You might find this article useful on how to remove old (or unnecessary) drivers -

1) Via device manager

Option #1

There are two ways to roll back a driver through Device Manager. I like the first one because when you rollback, you can manually select the driver version that you need. I’ll show you with an example how you can restore an old working driver to a video card. So...

First we open device Manager . To do this, go to the control panel, enter “devices” in the search and among the results found there will be a link to the desired manager (see screenshot below).

After which a menu will appear with the choice: produce automatic search or manually on this PC. We choose the second option (see example below).

If you had several versions of drivers on your PC, you should now see a list of them. Be guided by dates, versions and title. By choosing any of the versions, agree to the installation.

All! The screen should blink, and then you will see a message indicating the successful (or unsuccessful) completion of the operation. An example is presented below.

Option No. 2

You can roll back the driver in another way: by finding required device in the manager, open it properties.

In properties, open the "Driver" tab - at the bottom of the window there should be a button "Roll back". I note that it is not always active (even if you recently updated the driver). Therefore, I recommend first trying the first rollback option (described above), and then this one.

Roll back the driver (if the device does not work after updating)

2) Using System Restore

If you have system restore points (and according to Windows default makes them (except for dozens)) , then you can try to roll back to the old driver using system restore.

How to see if there are restore points and run System Restore:

Addition!

3) Using special Driver backup utilities

I couldn’t help but mention this method in this article. True, in order to use it, you need to make a backup in advance (perhaps someone will find this method useful in the future).

The essence of the work is approximately as follows:

Addition!

This post will tell you how to create a backup step by step and subsequently restore drivers from it:

That's all.

Thank you in advance for any additions on the topic.

Software developers for specific equipment are constantly improving it so that the component parts can work as efficiently as possible, as a result of which either update packages or completely new products appear that should replace the old ones. However, such an effect may not always be achieved, as a result of which it leads to the opposite result and applications may crash on the computer, unplanned reboots occur, etc. Let's figure it out how to roll back the driver for a video card to a version in which the equipment worked stably and without failures.

In a situation with graphics adapter, if the version of the new special software is unstable in operation and there are certain bugs in it, then in this case games will constantly crash, an error will be displayed on the screen that the video driver has stopped responding, the screen resolution will be reset and other troubles. That is why actions aimed at returning previous version drivers are up to date.

Remember that to correct the current situation it is not at all necessary to use the system restore function, although this step can indeed solve this problem. All you need to do is re-install older versions and everything will be restored. In this case, it is absolutely not necessary to search and download earlier packages from installation files on official and other resources, this issue can be resolved directly using the built-in tools of the operating system.

Procedure for rolling back a video card driver to a previous version

So, to return to using the old version of the video driver, you need to:

At this point, the driver rollback process is considered completed, after which the system should work stably and without failures.

It is worth noting that for other devices everything is done by analogy, if necessary. To do this, you just need to find the required component part in the list presented in the Device Manager window and repeat the above steps.

It is also worth remembering that a video card is a physical device that can break down and software here will not be the reason for poor computer performance. This problem cannot be solved at home and the user will have to disconnect this component and contact service center so that they repair it or purchase a new graphics adapter.

Good afternoon, dear readers of the blog site. Today I want to tell you how to roll back device drivers and when it may be necessary. From my personal experience, I’ll tell you how I had to roll back my video card drivers after incorrect update software. To begin with, I will say that restoring the previous version of drivers allows you to return the settings and installations of your computer components. A driver is a firmware that allows the equipment to work correctly as part of a computer, so to speak, to integrate into the system.

Everyone also has internal programs external devices such as printers, acoustic system or network hardware(you can read information about this in one of my articles).

Updating drivers and possible problems associated with this process

One day I came across a very interesting one on the Internet that allows you to scan your computer or laptop for outdated internal software. The program is really useful, convenient and, most importantly, free. By running it on your computer, you can see a report on all devices on your PC. The program interface will display information about which firmware needs to be updated, and which devices have the latest software installed.

As a result, I downloaded and launched this program. The whole process took little time, and it turned out that almost all devices required updating. After scanning and updating, the system automatically started the reboot process for all changes to take effect. However, to my surprise, during loading I did not see standard screen operating system, instead the screen was just a black background with a mouse cursor. Based personal experience I realized that the firmware installed on the video card causes a hardware conflict and, accordingly, the impossibility of displaying the correct image. It was decided to either roll back the driver update , or install a new version.

This situation with the video card and internal software usually happens when the Bios of your computer, or rather motherboard does not support updated software. A solution to this problem is possible Bios update, but it is better to entrust this process to specialists, since without the necessary knowledge everything can only get worse.

Inexperienced users may have a question about how to roll back drivers if we don’t see any graphic image. In this case, it comes to our aid , allowing you to run operating system with minimal settings and low VGA graphics resolution. I described how to enter safe mode in a separate article, the link to which is given above.

So, after starting the system in safe mode you need to find a place where updated drivers are rolled back, but first you should check how the rest of the software installed. To do this, right-click on the My Computer shortcut and select Properties

And in the window that opens on the left side, select the section Device Manager.

After this a window will open Device Manager c, which will list the devices installed on your computer. If some firmware was not installed correctly, then directly next to the corresponding device there will be a Exclamation point in a yellow triangle. This situation can arise not only after but also during regular work. What this may be connected with depends on what actions were performed previously.

Returning to how to restore drivers for a video card, in the device manager, select the video adapters tab and click on the element we need right button mouse and select the item in the menu that opens Properties, after which another window of the properties of this or that iron should open. Next, select the tab Driver and press the button Roll back.

Next to this button it says “If the device does not work after updating the driver, a rollback restores the old driver”, accordingly, the system itself suggests solutions to problems s.

After the completed operations, a little time should pass when the process ends and the system displays a message indicating the successful completion of the operation. Next, you should restart your computer for the changes to take effect, but before that, I advise you to once again pay attention to possible conflicts between your devices and your computer. If no hardware discrepancies are identified, then feel free to reboot the computer and observe the correction of our problem, in fact, as was the case in my case with the video card.

The process described above is applicable in any case and to any hardware, be it sound or . Finally, I want to say that before updating the firmware, make sure it is compatible with the version of your hardware and preferably read more information about this on the official website. The fact is that a well-chosen assembly can significantly increase the performance of the device and eliminate possible critical errors.

I really hope that the information on how to roll back drivers was useful and understandable for you, but as often happens, there may be certain questions left that you could not find answers to on the pages of my blog. To solve any problems that arise, leave a question in the comments, where we will try to give the necessary advice.