How to change the date on iPhone in a simple way. Setting the date and time on iPhone
Over time, your iPhone's date and time settings may change. This usually happens one to two months after the last manual installation, the clock runs out by one or two minutes. Also, all settings may be lost when the device’s firmware is updated, it freezes or reboots incorrectly. But there’s nothing to worry about, since all the parameters on your iPhone can be easily changed by changing the time and date to the current ones.
Changing date and time settings on iPhone
- Open the Settings application on your device. Go to device settings
- From the general list, go to the “Basic” section.
Go to the “Basic” section - Go to the “Date and Time” subsection.
Go to the “Date and Time” section - We enable the “24-hour format” function so that the clock is displayed in the usual format, or disable the function that the clock is displayed in the “so many hours of the day” or “so many hours of the night” format, that is, in a 12-hour format.
Enable or disable 24-hour format - You can activate the “Automatic” function so that every time you connect to the Internet, the device independently compares the time and date deviations and adjusts to an accurate state.
Enable the “Automatic” function - Turn off Automatic to allow manual date and time settings.
Disable the "Automatic" function - Go to the Time Zone section to select the time zone format you are in. You will be offered a list of major cities, select the one closest to you.
Selecting a time zone - Spin the special drum to set the date and time manually.
Set the date and time
Video tutorial: “How to change the clock on an iPhone”
What to do if you have problems with date and time settings
There are several problems that almost every user faces sooner or later.
The "Automatic" function does not work
There are two reasons for this:
- The device does not have stable Internet access. Connect to mobile internet or Wi-Fi networks for the function to work.
- In some regions this function does not work. If you live in an unsupported region, there is only one way out - change your location.
Also, if you have just activated the function, then in some cases it is worth restarting the device, and only after that the time will begin to update automatically.
Automatic translation is not working properly
This problem can arise for two reasons:
- The time zone settings are incorrect. Go to the date and time settings section and change the selected time zone.
- The time zone in which you live has switched from winter to summer time or vice versa.
The time does not match the time in the applications
This can happen due to an incorrectly selected time zone. Change it so that the time on the device and in the applications match.
Data keeps getting lost
Try disabling or, conversely, enabling the “Automatic” function in the date and time settings. If this does not help, then the reason is as follows:
- The device is synchronizing with some service or the computer has incorrect settings.
- The device is broken, it must be taken to a service center to get help from qualified specialists, or the settings must be reset to factory settings.
Expose own settings date and time or enable them automatic update on IPhone any The model is very easy, just go to the device settings and go to the appropriate section. If you have any problems and the methods described above do not help, then contact the customer service Apple support. And remember that changing the time settings to receive a bonus in games Apple company doesn't like it very much, so don't abuse it.
When purchasing a new device, and in this case Many people have an iPhone and there are a lot of difficulties with using it.
The date and time, which we set immediately after turning on the phone, was no exception. On an iPhone, all this is done quite quickly and easily.
Therefore, today I will tell you how to change the date and time on an iPhone. Everything will be with a detailed explanation and screenshots.
Changing the date and time
Our device is already in our hands. Unlock it and see the iPhone desktop, go to Settings.
Now scroll down a little with your finger until you see the word Basic, which we actually click on. 
Scroll down a little again and see date and time. Click on this menu item. 
This is our main working window for today. We see that the date and time are not visible at all. It is not at all clear how to change them.
There is a point Automatically, if there is a green mark on it, then this means that everything is configured automatically from the Internet. Press this button so that it is inactive. 
Now the current date and time on the phone appears just below, click on it. 
Drums appear even lower for setting all the necessary parameters. 
After successful setup, you can try changing other settings. This could be a time zone or a clock format.
Results
Now almost everything happens automatically and if there is an Internet connection, then everything is configured itself. If the location changes, the time can also be automatically adjusted according to the new city.
As you can see, there is nothing difficult at all in changing the date and time on an iPhone. Just go a little through the necessary menu items and you're done.
There are situations in which you simply need to change the time manually. For example, because of a game - if you urgently need to get some useful thing ahead of schedule. It’s quite easy to change the time on iPhones if you know how to do it correctly - there’s nothing complicated, you don’t have to install any additional programs, all you need is a little of your free time.
Sometimes something goes wrong and the time gets lost, and this is without even looking at the vaunted myths that on iPhones it is always correct and does not lag behind. This is not true at all. New versions of iOS usually have many bugs, and users face significant difficulties at first. By the way, some problems have not yet been resolved, so from time to time it is necessary to return the clock to its normal position.
Among the common problems: when traveling without the Internet, time zones may not change for hours, misleading you. Confusion and nerves can prevent you from figuring out how to change the time yourself. In addition, on newly purchased iPhones (or on those on which they “rolled back” to previous version or erased all data) the default time zone is Cupertino.
In new generation operating systems (starting from iOS 7 and higher), thanks to pleasant and convenient design It’s much easier to understand how to set the time, but there are some nuances here too. Surely many of you thought that you can change the time through standard utility“Clock,” but that’s the rub. It won't work that way. This program only shows world time, while it does not have a function for changing local time.
How to change time
1 Go to Settings. Click on General. Scroll down a bit to find "Date & Time". By default, you have a 24-hour format. If you change it to 12 hour, the time will be displayed in AM and PM format. For example, if it is now 17:55, it will simply be 5:55 PM. If you are in the USA, then it will be more convenient to choose this mode.
2 The time zone is determined automatically. If you have geolocation enabled, it will be shown much more accurately, but if you have turned it off (to save phone battery, for example), then the time zone may differ slightly from yours. Feel free to disable the “Set Automatically” button. At the bottom, a fourth line immediately appears, blue, where it is written current date and time.
Why is it better to be able to set the time yourself?
The automatically set time zone sometimes does not correspond to reality - this is why problems arise. If you know how to change the time on an iPhone yourself, then it will be much more convenient - if the settings are lost, you can always quickly return everything back.
It’s also worth considering transitions, which are often displayed incorrectly. For example, some countries no longer switch to daylight saving time and winter time(like Russia, for example), but on some older models where it is no longer possible to update operating system, everything remains the same. Therefore, it is highly advisable to update to new iOS versions as quickly as possible, if possible.
If you have changed the time, but it either gets lost again or goes back to the old value, then try resetting the phone to factory settings. This could be a bug in the firmware. Sometimes it can be a defective phone - usually in such cases Apple replaces it. Before doing this, it is advisable to contact service center.
Another problem with incorrect display date and time may be due to the wrong calendar. Go to "Language & Region", scroll down to "Region Formats" and click on "Calendar". You should have "Gregorian". Problems with incorrect display of the year (for example, the iPhone showed the year 2556) are associated with the Buddhist calendar, which could be installed automatically.
On this moment, almost 60% of Apple smartphone and tablet users more often look at the time and date directly from their device, while simultaneously using the calendar and notes. And the point is not in show-off and the desire to show off an expensive gadget, but in the fact that such time never goes astray and does not lag behind. In this article you will learn how to change the date in iOS.
In order to change the date in iOS, we need to go to the device settings. despite the fact that my instructions have screenshots from the iPad, it is also suitable for the iPhone/iPod touch, because iOS system, on all devices, absolutely the same.
When you enter the settings, you will have the “Basic” tab open by default, the only thing you will need to do is scroll down the right side of the screen (and forget about the existence of the left menu, we will not touch it!) until the item appears "Date and time". We are moving into it.
Now you should choose a mode that is convenient for you. If you turn on the “24-hour format”, the time will be displayed from 0:00 to 23:00, if you turn it off, then from 0 to 12 pm/am (morning/afternoon). My time is set automatically, based on my location (requires an Internet connection). To begin with, we will consider manual setting. (Don't worry, information about automatic configuration will be included at the end of the article, but first I advise you to familiarize yourself with the manual setup).
When disconnected automatic mode, we are asked to independently select the region and set the date/time. Select “Time Zone” and go to the region selection menu.
Here you just need to enter the city, and the device will automatically display the city/country data (based on its database, the Internet is not required for searching, as is the language database, time zones are already built into the device). Next, click on the appropriate option and it will take us back to the previous screen. Here, in order to change the date, you need to click on the blue font (the lowest item in the right menu).
Next, turn the switches with your finger, selecting the real date and time. Please note that the selection of the year is also carried out by scrolling the first wheel (with the date), scroll forward, the year is added, scroll back, everything is exactly the opposite. Once finished, click on any empty part of the screen, done!
Automatic setup.
Automatic setup has a slight difference. First, you need to connect to the Internet, with WI-FI assistance or 3G/4G, then select the region and, without clicking on the blue font, turn on the “Automatic” option. That's it, the time is set!
Changing the date and time is simple procedure, which usually does not cause any problems. But many beginners iPhone users all such people face difficulties. For example, they try to change these settings through the Clock app when it should be done through Settings.
Therefore, in this article we will consider this task in as much detail as possible. The material will be relevant to everyone iPhone models, iPhone including 4, 4s, 5, 5s, se, 6, 6s, 7, 8 and iPhone X.
To change the date or time on iPhone, open the Settings app and go to the General section.
Then open the “Date and Time” section, which is located towards the end of the list of settings, next to the keyboard, language and region settings.
As a result, a screen with time and date settings will appear in front of you. By default, enabled here automatic selection time zone and time. In order to be able to change the time and date, you must first turn off this option.
After shutdown automatic detection time zone and date, these settings can be configured manually. To do this, click on the current time zone value.
Then enter the name of the city into the search and select the proposed time zone option.
In a similar way, you can change the date and time; to do this, simply click on the date.
And select the desired date and time
Time and date settings are saved automatically. Therefore, after changing these settings, you can simply close the Settings application.
Possible problems when changing time and date
It should be noted that on mobile Apple devices With 64 bit processors there is a date related vulnerability. If you set the date on such a device to January 1, 1970, then such a device will freeze and turn into a brick. Wherein this problem can't even decide forced reboot device and you have to contact the service center. This issue may have already been fixed, but to avoid unnecessary problems It's better not to check this.
Besides this, there is another problem related to the calendar. Sometimes, users find that their calendar mentions the "Hensei Era", the year 2559, or something else in a similar style.
This is usually due to the fact that the device uses the Japanese or Buddhist calendar. To solve this problem, open the iPhone settings, go to the “General – Language and Region – Calendar” section and select “Gregorian Calendar”.
After changing the calendar, you will need to return to the “Basic - Date and Time” section and change the time and date there.