How to connect VPN on a laptop. How to start using VPN on any device

Facebook

Currently, in order to ensure communication between computers in the office, Virtual Private Network technology is actively used. allows not only to ensure reliable communication between corporate PCs, but also to provide all units of computer equipment with the best cryptographic protection. For this reason, you can be confident in the security of the transfer of corporate information, in the complete exclusion of third-party intrusion.

Setting up a VPN connection in different versions of Windows OS has differences.

It is very important to understand that setting up a VPN creates a new dedicated zone. All technical devices, including scanners and printers, will be visible to every user connected to the VPN. Every attempt by an outsider to penetrate the corporate network will be accompanied by absolute failure.

Of course, it is simply impossible for an ignorant user to connect Windows 7, 8, 10 to a VPN. First of all, it is very important to saturate yourself, first of all, with a sufficient portion of theoretical knowledge regarding the features of various operating systems.

If you have the slightest knowledge of computers, but are actively trying to figure out how to set up a VPN, we recommend that you familiarize yourself with our recommendations, and then, strictly following them, sequentially perform each step we have outlined. In this case, we can guarantee you a positive result.

To connect to the VPN network, first click on the “Start” shortcut located at the bottom right. When the secondary menu opens, select the Control Panel option.

After this, it is important for you to go to the network settings. To make such a transition, find the desired parameter. In this case, it all depends on what type of display you have previously selected. Even if you didn’t choose it yourself, it means that it was chosen independently by the operating system or by the person who originally installed Windows on your computer.

You can easily switch categories if you wish. This kind of switch is located at the top of the window on the left side.

So, if the “Browse by category” option is set there, look for the “Network and Internet” line and click on it. If the “Classic style display” option is selected, then it is important to find the line “Network and Sharing Center”.

So, after making these transitions, you will be able to seamlessly visualize the “Set up a new connection or network” sentence. Just click on it with the left mouse button, you will immediately go to a new page on which you will be asked to create a new connection to the network.

If you decide to connect your PC to a VPN network, then select the “Workplace Connection” offer, which is often fourth on the list. Next, you just have to strictly follow all the advice that appears, but also be sure to take into account some of the nuances that arise as a result of installing different versions of the operating system.

Connecting to a virtual network is carried out only after installing a kind of VPN server, which can perfectly serve as one of the corporate computers. It is this VPN server that will control access to all other computers included in the corporate network space you created.

Of course, Windows itself will not be able to perform the “magic” manipulations that provide you with a successful corporate network. In this case, your participation will be required, which involves making certain settings.

ADVICE. Of course, it is difficult to figure out how to set up a VPN on your own, so we recommend that you do not break through an impenetrable wall, but carefully study our recommendations on how to connect to a VPN server if different versions of the operating system are installed on your PC.

Settings in Windows XP

If Windows XP is installed on your computer, click on the “Start” button, find “Control Panel” in the list that opens, go to it. After performing these simple manipulations, a window will open, on the left side of which the “New Connection Wizard” will be located, activate it, just run it. In the new window that opens, in the second position there will be the parameter that we will need to use.

Click on the line “Connect to a network at your workplace”, and then go to the line “Connect to a virtual private network”.

Now the connection wizard will confidently guide you to your desired goal, only recommending that you enter some information. In particular, he will initially ask you to come up with and enter the name of the corporate network you are creating. Of course, no one limits the flight of fancy, so the name can be anything. Next, the connection wizard will ask you to register the server. If it was decided to use one of the computers as a server, then it is better to enter the IP address of this PC in this field.

At the final stage, the wizard will automatically create a shortcut to the corporate network space you created. It wouldn’t hurt to make some additional changes, so double-click on the shortcut that appears to bring up a dialog box in which all the necessary settings are made.

There will be four tabs in this dialog box, go to one of them “Security”, select “Advanced (Custom Settings)”. Next, all that remains is to carefully study all the proposals and choose the acceptable parameters for your corporate network.

Settings in Windows 8

If Windows 8 is installed on your PC, then the algorithm of actions will not just be different, but as automated as possible. Of course, if you own a PC with Windows 8, you may be relieved that everything will be so easy to implement, but this does not mean that you can ignore our recommendations. One wrong step and you won't be able to successfully connect between corporate computers.

At the bottom of the screen on the right side, in the part where the clock is located, you can easily find the network status icon; in appearance it resembles a monitor. Right-click on this shortcut. After this, a new window will open in which you will find the “Network and Sharing Center” option. After clicking on this option, a new shortcut “Create a new connection or network” will appear, click on it and confirm that your PC has a direct connection to the Internet.

The Connection Wizard will also ask you to enter a name for your environment, and will also prompt you to make changes to various options if necessary. In this case, you can make additional network security settings, including:

data encryption;
password verification protocol;
access parameters.

You can contribute whatever you consider necessary. This completes setting up a VPN network in Windows 8.

Settings in Windows 7

If your computer comes with the Windows 7 or 10 operating system, then you are also somewhat lucky. Even if you are a beginner, but fearless user who took the risk of following the route we described in order to install a VPN network, we can rejoice in you that everything will certainly work out for you.

ADVICE. Connecting to a VPN network on a PC with Windows 7 or 10 is quite simple and fast; you just need to follow the prompts that appear on the screen. Once the connection is established, you also need to make some useful changes.

In Windows 7 and 10, there is a shortcut near the clock indicating the connection status to various networks. If you click on this shortcut with the left mouse button, a list of all connections that can be considered as a possible option for connecting to the Internet or a public network will immediately open.

Among this list you can find the name of your VPN network, select it, and immediately after that the “Connect” button will appear. By clicking on this button, you will have the opportunity to make some changes to the parameters.

Carefully read the security, login, and data encryption settings that Windows 10 offers in this case, and check the checkboxes next to the settings that are most important to you.

So, if you set out to connect several computers running Windows XP, 7, 8 and 10 to the corporate network, do not hold back your technical impulses. You can do everything if you carefully study the recommendations, and also make changes to the settings without undue haste, reading the suggestions of the network setup wizard more than once, but even 10 times, in order to understand why and what specific actions need to be taken.

A private virtual network (VPN) is good because it provides the user with a secure or trusted channel with another PC without the need for a dedicated communication channel. It is created on top of another network - the Internet, for example.

Windows has built-in tools for establishing a VPN connection between computers located over long distances. Let's set up a VPN tunnel between two PCs that are controlled by the Windows environment.

Let's create the server part

Connection of remote clients to the VPN network is organized through a special access server. It may require an incoming connection to go through identification and authentication procedures. It knows which users have access to the virtual network. It also has data about allowed IP addresses.

To set up a VPN access server in the Network Control Center, you need to open the applet for changing adapter settings. If the applet's main menu is not displayed, press the Alt button. A main menu should appear at the top of the applet, in which you should find the “File” item, and then select “New incoming connection”. Let's take a closer look.

In the control panel, go to “Network and Internet”.

In the next step, we will open the network center.

Let's create a new incoming connection.

The window that appears will prompt you to select from existing users or define a new one who will be allowed to connect to this PC.

When adding a new “user”, you need to specify a name and password with which he will be allowed to connect to the VPN access server.

In the next step, the Private Network Setup Wizard will ask how users will connect.

It is necessary to indicate that they will do this over the Internet, so let’s check the required option.

The next step involves setting up network applications that need to accept incoming connections. Among them is the Internet Protocol Version 4 (TCP/IPv4) component. You will need to open its properties and manually enter the range of IP addresses that are allowed to access the server.

Otherwise, leave this matter to the DHCP server to automatically determine the IP addresses. In our case, we had to manually determine them.

After processing the entered data, the access server will receive the required information to provide the necessary permissions to authorized users. At the same time, the system will prompt you for the computer name that will be needed in the future.

As a result, we will get the following result. There are no connected clients yet.

Let's set up the client

Modern networks are most often built on a client-server architecture. It allows you to highlight the main computer in a network environment. Clients initiate requests to the server and make the first attempt to connect to the server.

We have already configured the server part of this architecture. Now all that remains is to get the client part working. Another computer must act as the client.

We will establish a new connection in the network center of another PC (client).

We need to connect directly to the workplace.

Again, let's go to the Windows Network Center, only now on a different PC. Let's select the option to set up a new connection. The applet that appears will offer several options to choose from, but we will need the option to connect to a workplace. The wizard will ask you how to make the connection. We need to opt for setting up an Internet connection (VPN).

In the next step, the wizard will ask you to specify the IP address of the VPN access server and assign a destination name. The IP address of the access server can be found on our first computer by entering the ipconfig command in the command line. The IP address of the Ethernet network will be the address you are looking for.

Then, the system will apply all entered settings.

Let's make the connection

Time X for our experiment is when the client connects to the server side of our network. In the network center, select the “Connect to a network” option. In the window that appears, click VPN-Test (we specified the destination with this name) and click the connect button.

So, we will open the VPN-Test connection applet. In the text fields we indicate the “user” name and password for authorization on the access server. If everything goes well and our user not only registers on the network, but is also able to fully connect to the access server, then the designation of the connected “user” will appear on the opposite side.

But sometimes, this kind of error can happen. The VPN server is not responding.

Click on the incoming connections tab.

On the marked tab, open the properties of the IP protocol.

Let's set the option to specify IP addresses explicitly and specify which IP addresses need to be served.

When we reconnect, we will see this picture. The system shows us that one client is connected and this client is vpn (SimpleUser).

Brief summary

So, to establish a VPN network between two PCs, you will need to decide which of them should become the “master” and play the role of a server. Other PCs must connect to it through an authorization system. Windows has tools that enable the creation of a server part for our network. It is configured by creating a new incoming connection, specifying the user, and the applications that should accept the connection. The client is configured by establishing a connection to the workstation, specifying the user and server data to which this user should connect.

Every day the Internet is growing rapidly, the number of users is increasing. Then providers begin to offer us to use VPN technology. Indeed, this connection has a lot of advantages, but there are practically no disadvantages, we will talk about this below. In this article we will look at how to set up a VPN connection and why it is needed.

What is a VPN server

VPN is an acronym in English that translates to “Private Virtual Network”. It is important to know that VPN technologies are used on top of an already installed local or Internet network. They easily connect all computers into one single system. The most important and important advantage of VPN is the excellent protection of transmitted data, which is ensured through code encryption.

If computers have physical access to each other, which is provided through a connection via a network cable or wi-fi, then a vpn server must be installed. Don’t worry, a regular computer or laptop is perfect for this role. However, you will have to install the necessary software.

The task of the vpn server is to manage and configure the connection between the virtual network and the child machine.

On computers or, more simply put, machines, you will need to install a VPN Connection. This process can be simplified and written like this: setting up and setting the vpn server name, recording the address and password, which will be useful for a successful connection. The trouble is that there are many different operating systems, and, accordingly, the settings are different everywhere. Let's look at the most popular options in more detail.

How to set up a VPN connection in Win XP

How to set up a VPN connection

Follow these instructions:

Click on the “Start” button, which is located in the lower left corner of the screen. Go to “Settings”, then “Control Panel” and click on the “Network Connections” shortcut.
You need to find the “Network tasks” section, here select “Create a connection”
You can read the setup assistant’s greeting and click “Next”.
Here, select “Connect to a network at your workplace” and click “Next”.
The item “Connect to virtual. networks”, and again “Next”.
It's time to write a little, come up with and enter a name for the future network.
Now it's time to use the phone. Dial your provider's number and find out the VPN server address. After this, put the phone aside and write down the data received.
Finish the work; it is advisable to select the item where the installer offers to create a shortcut on the desktop.

After creating the network, the computer should automatically connect you to it. If this does not happen, then do it manually. Don't forget that the created connection can be completely edited and changed.

How to set up VPN on Win 7

More and more people are switching from win xp to win 7, and only the most faithful remain. This is not surprising, time passes, technologies change, and people are drawn to something more advanced and simpler.

To create a connection on this operating system, you only need to follow the instructions below. The main part of the process is practically the same as the previous version, but there are still some minor changes.

vpn server

Go to Network and Sharing Center. To do this, click on the “Start” button, then select “Control Panel”.
Select "Connection setup".
You are interested in the “Connect to a workplace” item, click “Next”.
The system will ask you a question that you must answer as follows: “No, create a new network,” click on the “Next” link.
Select the "Use my connection" section. We will have to work with the connection itself later, so click on the “postpone decision” button.
In the address field we enter the relevant information that we learned from our provider in advance. After this, call the connection by any name you like.
Pay special attention to the next paragraph, which configures access for other users. If you want to allow other people to use this connection, select “Allow”, otherwise select “Deny”.
Click "Create".

That's all, now you know how to set up a VPN server on Win 7. For convenience, you can install a shortcut with the connection in the quick launch panel or on the desktop. To do this, right-click on the shortcut and click on “Create Shortcut”, then select it and move it to the desired location.

To connect to a new connection, double-click on the shortcut, or right-click on it and select “Open”.

You can also simplify your future work and select the “Save password and login” option. This way you won't have to enter your personal information all the time.

When you first start the VPN connection system, you can select your location. If you click on the “Public Place” item, you will receive additional protection from the win 7 system.

Similar to the win xp system, the seven offers you to make any settings and changes to the system. You can change your password, name and other settings. To do this, right-click on the connection shortcut and select “Properties”.

How to set up VPN and Android OS

Perhaps one article is not enough to describe all the advantages of this operating system. But in our lesson we are discussing a completely different topic, so we will not deviate from the course. So, to make all the settings, you need to do the following:

Open the settings tab, then select “Manage wireless networks”. Here, pay attention to the VPN settings and click on “Add VPN”.
Confirm your actions and add “PPTP VPN”.
As usual, you will have to give the new connection a name, then specify the server address (we found it out from the provider) and save all changes.
All that remains is to connect to the network; to do this, double-click on the shortcut.
In the window that appears, enter your personal data - password and login.

Now you know how to set up VPN on Android. It is worth mentioning that here you can make any settings and changes. You can also create a shortcut for convenience, save your personal data and autoload this connection.

sovetisosveta.ru

How to use a VPN on iPhone, iPad and iPod touch

VPN is a feature available on iPhone, iPad and iPod touch that allows you to replace the device's IP address when accessing the Internet. There are several ways to use it.

Why do you need a VPN?

Using a VPN leads to the fact that when you access the Internet, all sites and other objects requesting your IP will receive not your individual number, which records from which location you are accessing the network, but another one, tied to another location or another country .

This function can be useful in cases where you need to access a site that is blocked in your country, or log into any resource blocked by the settings of the Wi-Fi network through which the connection is made. VPN provides anonymity, that is, no one will know that it was from your device that you entered a particular Internet resource.

That is, if you are, for example, in Russia, then with the help of a VPN you can set an IP for your connection, thanks to which it will be displayed everywhere that you are, for example, in Italy.

The use of VPN is officially prohibited in Russia.

How to use a VPN

On iPhone, iPad, and iPod touch, there are two ways to use VPN services: through the device's built-in settings or through a third-party application.

Using VPN through built-in settings

To use this method, you will have to find a site that provides VPN services in advance and create an account on it.

Video: setting up a VPN using the system

Using a VPN through a third-party app

There are many programs that provide a VPN connection. One of the best is Betternet, which can be installed for free from the App Store. To connect and disconnect a VPN you only need to press one button, and the time you can use the VPN is not limited. That is, you don’t have to manually enter settings, create accounts or use any other additional services. Just install the application, go into it and press the Connect button to connect and Disconnect to disconnect.

Connecting or disconnecting from a VPN via Betternet

You can also choose which country the VPN will link you to.

Choosing a VPN server via Betternet

Video: Setting up a VPN with Betternet

What to do if the VPN icon disappears

If the device is connected to the network via VPN, an icon will indicate this in the top notification bar. The disappearance of this icon means that you are still connected to the Internet, but redirection via the VPN has ended. That is, the VPN connection is interrupted; it may deactivate on its own due to an unstable Internet connection or problems with the server providing VPN services. In this case, you must manually reconnect to the VPN using one of the methods described above. You may need to reboot your device first before reconnecting.

VPN icon in notification bar

What to do if VPN doesn't work

A VPN connection may not work for two reasons: an unstable Internet connection or a problem with the server that provides VPN services. First, check whether your connection to the mobile Internet or Wi-Fi network is stable. Secondly, check the correctness of the entered settings if you used the first method described above, or install any other application other than the one described above in the second method, if you used it.

The best way to get rid of the VPN connection problem is to choose a different service or application. The main thing is to choose a VPN that will work in your area.

A VPN allows you to use services that are blocked in your area. You can use it through the settings of your Apple device or a third-party application.

dadaviz.ru

VPN - what is it, how to create a connection to a free virtual server and configure the connection

A Virtual Private Network is a virtual private network that is used to provide secure connections within corporate connections and Internet access. The main advantage of a VPN is high security due to the encryption of internal traffic, which is important when transferring data.

What is a VPN connection

Many people, when they come across this abbreviation, ask: VPN – what is it and why is it needed? This technology opens up the possibility of creating a network connection on top of another. VPN works in several modes:

node-network;
network-network;
node-node.

Organization of a private virtual network at network levels allows the use of TCP and UDP protocols. All data that passes through computers is encrypted. This is additional protection for your connection. There are many examples that explain what a VPN connection is and why you should use it. This issue will be discussed in detail below.

Each provider is able to provide user activity logs upon request from the relevant authorities. Your internet company records every activity you do online. This helps relieve the provider of any responsibility for the actions carried out by the client. There are many situations in which you need to protect your data and gain freedom, for example:

The VPN service is used to send confidential company data between branches. This helps protect important information from being intercepted.
If you need to bypass the service's geographic location. For example, the Yandex Music service is available only to residents of Russia and residents of the former CIS countries. If you are a Russian-speaking resident of the United States, then you will not be able to listen to the recordings. A VPN service will help you circumvent this ban by replacing the network address with a Russian one.
Hide website visits from your provider. Not every person is ready to share their activities on the Internet, so they will protect their visits using a VPN.

How VPN works

When you use another VPN channel, your IP will belong to the country where this secure network is located. When connected, a tunnel will be created between the VPN server and your computer. After this, the provider’s logs (records) will contain a set of incomprehensible characters. Analyzing the data with a special program will not produce results. If you do not use this technology, the HTTP protocol will immediately indicate which site you are connecting to.

VPN structure

This connection consists of two parts. The first is called an “internal” network; you can create several of these. The second is the “external” one, through which an encapsulated connection occurs; as a rule, the Internet is used. It is also possible to connect to the network of a separate computer. The user is connected to a specific VPN through an access server connected simultaneously to the external and internal networks.

When a VPN program connects a remote user, the server requires two important processes to go through: first identification, then authentication. This is necessary to obtain the rights to use this connection. If you have fully completed these two steps, your network is empowered, which opens up the possibility of work. In essence, this is an authorization process.

VPN classification

There are several types of virtual private networks. There are options for the degree of security, implementation method, level of operation according to the ISO/OSI model, and the protocol involved. You can use a paid access or a free VPN service from Google. Based on the degree of security, channels can be “secure” or “trusted”. The latter are needed if the connection itself has the required level of protection. To organize the first option, the following technologies should be used:

How to create a VPN server

For all computer users, there is a way to connect a VPN yourself. Below we will consider the option on the Windows operating system. This instruction does not provide for the use of additional software. The setup is carried out as follows:

To make a new connection, you need to open the network access viewing panel. Start typing the words “Network connections” into the search.
Press the “Alt” button, click on the “File” section in the menu and select “New incoming connection”.
Then set up a user who will be given a connection to this computer via VPN (if you only have one account on your PC, you will need to create a password for it). Check the box and click “Next”.
Next, you will be asked to select a connection type; you can leave a checkmark next to “Internet”.
The next step is to enable network protocols that will work on this VPN. Check all the boxes except the second one. If desired, you can set a specific IP, DNS gateways and ports in the IPv4 protocol, but it is easier to leave the assignment automatic.
When you click on the “Allow access” button, the operating system will automatically create a server and display a window with the computer name. You will need it for connection.
This completes the creation of a home VPN server.

How to set up a VPN on Android

The method described above is how to create a VPN connection on a personal computer. However, many have long been doing everything using their phone. If you don’t know what a VPN is on Android, then all the facts described above about this type of connection are also true for a smartphone. The configuration of modern devices ensures comfortable use of the Internet at high speed. In some cases (to run games, open websites), proxy substitutions or anonymizers are used, but for a stable and fast connection, a VPN is better suited.

If you already understand what a VPN on a phone is, then you can proceed directly to creating a tunnel. This can be done on any device that supports Android. The connection is made as follows:

Go to the settings section, click on the “Network” section.
Find the item called “Advanced Settings” and go to the “VPN” section. Next, you will need a PIN code or password that will unlock the ability to create a network.
The next step is to add a VPN connection. Specify the name in the “Server” field, the name in the “username” field, set the connection type. Click on the “Save” button.
After this, a new connection will appear in the list, which you can use to change your standard connection.
An icon will appear on the screen indicating that there is a connection. If you tap on it, you will be provided with statistics of received/transmitted data. You can also disable the VPN connection here.

Video: Free VPN service

sovets.net

How to enable Opera VPN: instructions for PC and smartphones (2017)

Let's look at how to quickly enable VPN mode in the Opera browser to remain anonymous online.

This technology allows you not only to hide your location, but also to protect all data that is transmitted and processed during the session.

Only after connecting to a private network is it better to log in to social networks, enter logins and passwords and make transactions via the Internet. Most often, technology is important for users not so much for data protection as for opening access to blocked sites and services.

Contents:

Browser developers have created a built-in system for protecting user data. The network can now be activated without downloading additional programs and browser extensions.

The user simply needs to activate the mode and continue to use sites as usual.

Before using the mode, make sure that the following requirements are met:

Opera 40 or a newer version of the browser is installed on your computer. Older versions of the program do not support the built-in VPN mode. You can download the latest version of Opera for free on the developer’s official website;
All programs that create a private data exchange network are disabled in the operating system and other browsers. Enabling several VPNs at once does not make sense and may cause traffic failure.

To enable it in the desktop version, follow the instructions:

Open the browser and click on the “Settings” item in the main menu tab or press the key combination Alt+P;

Fig.2 – main browser window

In the window that opens, find the security settings tab and select it;
On the right side of the window, check the “VPN” checkbox to activate the virtual private network.

Fig. 3 - activating a private network using built-in browser functions

After enabling the option, the Internet connection speed may drop by an average of 20%-30%. This is due to the fact that all user requests are first sent not to the provider, but to a remote server, which requires additional time.

The provider of the proxy server for the built-in VPN is SurfEasy Inc.

Modern technologies are improving at tremendous speed, opening up an amazing breadth of new opportunities for us. Not long ago, Internet users began to use a private network - VPN. It allows you to create a secure connection between remote PCs, providing:

anonymity of work on the World Wide Web;
the ability to download applications when the IP address is located in a different regional zone;
high safety of work in a corporate environment;
high transfer speed without interruptions;
the ability to create a channel protected from hackers.

Let's look at how to connect to the Internet via VPN on different OSes.

The OS is more complex than previous versions. But setting up a connection via VPN turns out to be very simple. Follow the step by step instructions below.

Open Start. From the drop-down list, go to “Settings”. This subsection may be called "Options".

Where can I find “Options”?

When the Windows Settings window appears, you will see the Network and Internet option. Open the content. There is a “VPN” item here. Make one click. Click "Add VPN connection". In the new window, set the following parameters in order:

Windows (embedded);
Business Communication;
L2TP protocol;
. The necessary information is specified in your agreement for the provision of Internet services.

Check that the fields are filled in correctly and click “Save”.

Setting up a VPN on Windows 7

Here the phasing has no fundamental distinctive features. The only difference is the location of the sections that interest us. Proceed to the "Control Panel".

Where is the Control Panel located?

We will need “Network and Internet”.

We need a control center. From here you can manage networks and access. You will need to configure the connection. This will be a new direction.

You will need an active “Connect to workplace” button. Go ahead. “Use my Internet connection” will appear at the top of the form. Let's make a selection. A form will appear where you enter in the stated sequence:

Business Communication;
Check the "Don't connect now" checkbox. You will be prompted to simultaneously check for future connections;
move on.

On the page that opens, enter your username and password. This information is provided when signing an agreement for the provision of communication services. Place a marker in the box that asks you to remember your password. Next, a working connection will be displayed. The form can be closed.

While in Control Center, continue working with custom metrics. In the form, click on “Change adapter settings”. The active and passive connections will be highlighted. Click on the configured option and select Properties. This is done through the right key.

You will be on the General form. Here the address information regarding the VPN server is checked. Correct view: inter.net.

In the “Security” form, you also need to make certain settings. Put VPN type here. There is no need to register anything. It is enough to use the drop-down list. Select the item: L2TP/IPsec. In the “data encryption” line, enter: optional. Click OK.

Stay in the connections tab. Here you will need to create a shortcut for “Business Connection”.

When you see a message that an icon cannot be created in this folder, agree to move it to your desktop.

Go to the main screen. Here you will find the corresponding label. Double-click with the left mouse button. A window will appear where you should select “Connection”.

You can check this point by following this path:

go to “Network and Internet”;
specify the section you are interested in. This is the control center;
you need to check the configured indicators. Go to the form where the adapter settings are changed;
Before finding the information you are interested in, read the sections. You will need “Network Connections”;
we require “Local Area Connection”;
go to “Properties”, open “Network” and select “TCP/IPv4”;
click on “Properties”;
The item about obtaining an IP address automatically must be activated, click on OK.

Now we can say with confidence that the connection to the VPN is complete.

How to connect a VPN on Windows XP

Getting started is exactly the same as in version 7 of the OS. After activating the creation of a connection, the Connection Wizard will automatically launch. With it you will resolve the issue faster and more conveniently. After following “Next”, find the second item. It will allow you to connect to the network on your desktop.

Keep tuning. You will see the “Connection name” window. Specify Business Connection. Proceed to the second stage.

Stop at “Select VPN Server”.

You will be taken to the last page of the wizard. Check the box where you are offered to display a shortcut on the desktop. Complete the procedure.

Confirming settings and creating a shortcut on the desktop

Click the right mouse button on the window that appears. Go to "Properties". In the first tab, check the VPN server address. It should be written here: inter.net. Go to "Options". Mark with the marker “Call back when connection is lost.” Then open “Security”. Remove the checkbox from “Data encryption required.”

The connection window appears. It asks for a username and password. Enter the information provided by your Internet service provider when completing the contract. Place a marker next to the prompt to save passwords. Start connecting.

As in the option discussed above, double-check that you received the IP address. It should be done automatically. This is done through Start. Find "Network and Internet Connections". From the suggested sub-items, select “Network connections”. Find “Local Area Connection”, right-click to get to Properties. Here you need to highlight TCP/IPv4. Then you need to go to Properties again. Now check for the checkbox next to the offer to register your IP address automatically.

Setting up mobile equipment on Android OS

If you need to set up a VPN on mobile devices, use the step-by-step instructions below. It will create a secure channel connecting separate networks and providing access to them for people who regularly change their location.

Important! For the setup to be successful, you need to know the address of the server to which you will connect, your login and password.

Open the Settings menu on your device.

In the “Wireless Network” column, click on the “More” sub-item and select “VPN”.

Check the box to add a VPN connection. It may be called that or designated as “+”.

A form will open in front of you where you need to enter the settings:

“Network name” - any name. You decide what name to give your new VPN connection;
"Type" - "PPTP";
“Address”—VPN server address;
click on the “Save” button.

Find out detailed instructions for setting up home Internet in the article -

When you first start, the system will ask for your username and password. To avoid having to enter them again next time, check the box next to the prompt to remember user data.

The VPN connection is configured and ready to use. You will learn about this thanks to the corresponding notification. By clicking on the icon that appears, you will see detailed information on the connection.

The issue of creating your own VPN server is now more pressing than ever. This technology will help you achieve increased security and anonymity online. Below we will look at the basics of creating VPN servers and connecting to them from different platforms: Windows, Mac OS X and Linux, as well as from smartphones running Android and iOS.

Why make your own VPN server

Before creating and configuring a server, let's figure out why it is needed at all. Isn't it easier to connect to one of the many ready-made services? In fact, having your own server has a number of advantages:

stable speed;
lack of IP neighbors;
full control over security, encryption, speed and other attributes;
renting a server is cheaper than buying a subscription to ready-made VPN services.

There are also disadvantages:

you will have to figure out the settings, which is not always possible for a beginner;
you need to regularly monitor the release of security patches if data confidentiality is at the forefront of your mind;
You will still have to shell out a certain amount (to rent a VPS) if you plan to set up a more or less secure connection. On average, you can now find a server with decent speeds for $3-$5 per month, but there are also more expensive plans that offer increased levels of security and/or speed.

How to create a personal VPN server

Let’s say right away that creating your own dedicated VPN server is a rather complicated matter, requiring a lot of technical skills and knowledge, the description of which is beyond the scope of this article. Here we will tell you the general principles of creating a VPN server, and also describe the process of connecting to it.

To create your own secure VPN, you will need to rent a virtual server - VPS. The cost of such a service now fluctuates around 3–5 dollars per month for acceptable communication quality. The most popular hosting sites where you can rent a server:

fozzy ;
expressVPN.

If your goal when using a VPN server is to bypass blocks and restrictions associated with your country of location, then choose servers located in another country.

To set up a VPN server, they usually use software such as PuTTY, OpenVPN, Winbox and the like. The setup process is different for each of these utilities, but the basic steps are as follows:

Selecting and enabling a protocol.
Creating a pool of addresses for clients.
Creating username-password pairs for the created client pool.

Some of the services offering VPS rental also immediately provide the user with detailed instructions with ready-made scripts, which simplifies the process of setting up the purchased server. In this case, all the software that is required to work with a personal VPN server is already included in the connection package and is provided for money. One example would be the already mentioned expressVPN. It is worth noting that the cost of renting a server with such a service will be slightly higher - about 8–10 dollars per month.

All of these services also offer business solutions and corporate VPN servers. Sometimes you can find a separate “corporate” tariff, which will include additional services, increased speed and no traffic restrictions.

Making a VPN server on Windows

On Windows XP, 7, 8, 8.1 and 10, you can configure an encrypted tunnel without installing third-party software. In this case, the computer will be a local server. Without renting a server, its only function is to provide encrypted communication between local network participants. For this method, you will need your computer to connect to the Internet through a router. Please be patient - the process will not be easy:

First, let's set a static IP for our computer. To do this, go to the “Network and Sharing Center” (right-click on the Internet connection icon in the tray).
Click Change adapter settings.
Right-click on your active Internet connection and select “Status”.
Then click on “Details” and pay attention to the value opposite IPv4 - this is the current IP of your computer. In order not to disrupt the connection of other devices on the network, we will assign it as a static IP.
To do this, close the information window and in the connection status window, click “Properties” (administrator rights are required).
Select the line with IPv4 with the mouse. Do not uncheck the box - click on the text of the line itself.
Click Properties.
Select “Use the following IP” and enter in the first line the value that we saw in the connection information.
The “Subnet Mask” line will be filled in automatically; you do not need to enter it manually. The value will be 255.255.255.0.
In the "Default Gateway" and "DNS Server" lines, enter 198.168.1.1.
Save your changes and exit.
Now you need to create a downstream connection. To do this, while in the “Change adapter settings” window, press Alt on your keyboard so that the top menu appears. Click "File" - "New incoming connection".
Click Next until you have a list of users. Click "Add User". In the window that opens, enter your login for future connection to the VPN and password. You can also specify "Full Name", but this is an optional field.
Click Next again until the wizard completes the installation.

So, the initial computer setup is complete. Now you need to configure port forwarding on the router. Due to the fact that web configurators from different manufacturers are very different from each other, we cannot provide universal instructions. But you can find your router model on the website - step-by-step setup instructions are stored there for most models of popular routers. You need to configure port 1723 using the static IP address that you previously assigned to the computer as the IP host.

Forwarding settings vary depending on the router model

Now we need to adjust the Windows firewall to our VPN server. For this:

Now let's check the result of our work. To do this, go to the Open Port Checker website:

Your IP will automatically appear in the first field. In the second, you need to enter 1723 - the number of the port of interest.
Click Check.
After checking, the site should display Port 1723 is open. If you get the message Port 1723 is closed, it means you made a mistake somewhere above, double-check all the data you entered. Most often the error is related to port forwarding - check the instructions for your web configurator again. If everything worked out, then the server is configured correctly and is ready to work.

In the future, you can connect to the configured server using the configured static IP as the address, and the user data that we entered at the very beginning as the name and password.

Video: creating a VPN server on Windows 10

Creating a VPN on a router

You can also create a VPN server on your own router. This method has several advantages:

automatic connection of all devices to the encrypted tunnel;
the ability to connect not only smartphones and computers to the VPN server, but also game consoles, Smart TV and other devices;
protection against Wi-Fi thieves.

But compared to a full lease, there are a number of disadvantages:

not the highest level of security;
To avoid severe losses in speed, you need to get a fairly powerful router (RAM from 512 MB). If your router is weaker, then be prepared for the connection to be quite slow;
Not all routers support VPN. Most models are capable of working with the PPTP protocol, but it is not the most secure;
the router's operating system itself may be vulnerable to hackers. If you are afraid that you may be hacked, then you should not set up a VPN on regular home routers like TP-Link or Netgear. Better pay attention to Microtik, Juniper and similar “professional” brands. You will have to tinker with setting them up, but the level of security will be higher.

The server creation process itself will vary for different router models due to differences in web interfaces. As an example, we will look at working with an Asus router:

Open the VPN tab located in Advanced Settings. For other routers, a similar tab may be located in the “Network” menu items.
Enable the PPTP server. The list of supported protocols depends on your router - the most common are PPTP and L2TP.
The appearance of the web interface may vary depending on the firmware version
Go to the "More about VPN" tab.
Select the Broadcast Support that suits you (in general, LAN to VPN is suitable) and configure encryption.
Here you can set data encryption features
Scroll down the page and configure the VPN server client IP addresses. Different routers support different numbers of clients. For Asus, for example, this number is ten.
Here you need to enter not individual IP addresses, but range boundaries
You can now create usernames and passwords for them. Let’s go back to the “VPN server” tab and click the plus sign in the bottom line. Enter the username-password pair. You can enter as many pairs as the number of clients you added in the previous paragraph.
Using this data, clients will be able to connect to the server

In the future, you can connect to this server while on the same network as the router. You will need to enter the data that we specified in the last step of the instructions as your username and password. And the server IP address is the address of the router itself. You can find it in the web configurator. For most manufacturers, this data is indicated on the main page of the configurator. For Asus, for example, the IP address of the router can be found on the main page, “Network Map” tab.

It is this address that must be entered in the “Server IP address” field when connecting to the VPN on the client device

Connecting to a VPN on Mac OS X

Native Mac tools only prompt the user to connect to a VPN server, but not create one. To connect, follow simple instructions:

Open "System Preferences" - "Network".
Click on the plus sign in the lower left corner.
Select "Interface" - VPN.
In "VPN Type", select the server protocol you selected. Most often now you can find “L2TP over IPSec”.
You can also choose Cisco IPec or IKEv2, but PPTP is not currently supported by standard Mac tools
Enter the server address and username.
If you selected other authentication methods when setting up the server, select them in this window
Click "Apply" and then "Connect".

If everything is configured correctly, then in the connection window you will see icons for outgoing and incoming traffic. If for some reason the computer cannot connect to the server, it will give you a warning about this.

VPN on Linux

Setting up a VPN will vary slightly between distributions, but the basic steps will remain the same for all OS versions. We will provide the version for Ubuntu:

Open "Settings" - "Network Connections".
Click Add.
Select the protocol you are interested in (PPTP or L2TP) and click “Create”.
Go to the VPN tab.
At the top of the window, enter a custom connection name.
Enter your login and password, as well as the server address in the “Gateway” field.
On the “General” tab, check the box next to “All users can connect.”
On the IPv4 tab, select the “Automatic (VPN)” configuration method.
Save your changes, exit and close the network connections window. The setup is complete.

Connecting to VPN on Android

On Android phones and tablets, you can connect to the VPN server as follows:

Connect to VPN on iOS

You can connect to a VPN server on iOS using the system’s native tools:

Open "Settings" - "General" - VPN.
Click "Add VPN Configuration".
Fill in the fields. “Type” - connection protocol, determined by the server administrator. “Description” is your arbitrary description of the configuration. You can't leave it blank, so enter at least something. “Server” - server address. “Account” is your username. “Password” is your personal password. “Shared key” is an IPSec key common to all server clients. Click "Done."
You can then tap “Connect” next to the created configuration. If the connection is successful, you will see a small VPN icon at the top of the screen.

Common mistakes

Let us briefly outline the most common mistakes that a beginner can make when creating, configuring and connecting to a VPN server:

the remote server does not respond or error 400. First, check the functionality of the Internet connection as a whole - sometimes due to a temporary malfunction of the router, a similar error may appear. Then, if everything is ok, try disabling the firewall (if you are on Windows). It may mistake some encrypted traffic for malware;
"problem connecting to VPN", error 691. In this case, the problem is usually on the server side. Either you entered his address incorrectly, or your lease has expired and access is denied. If you have made a server, then the problem usually lies in incorrectly configured forwarding of port 1723;
error 800. It is usually caused by technical problems on the way to the server. If you are using a public VPN server, this error may indicate that the gateway is overloaded. Just wait or try connecting to another free server;
"The requested address was rejected by the server." This error usually occurs if you have purchased access to a VPN service, which assumes that you are using a dynamic IP, but you have registered a static one. Change the IP address type to dynamic.

Now you can set up your own VPN server, connect to a ready-made one, and also have an idea about creating a dedicated server, including for corporate use.