How to connect a Bluetooth speaker to a laptop, phone and other devices: step-by-step instructions. Instructions for using a portable speaker JBL Portable speaker then 775 bluetooth instructions

Many people think that a wireless speaker can only be used to enhance the sound of a smartphone - by connecting the phone and launching your playlist. However, some models support FM radio and can pick up local waves.

Is it possible to turn on the radio on a JBL speaker?

Despite the fact that the Internet is full of instructions on how to tune radio stations on JBL speakers, only one model from this manufacturer is actually equipped with an FM tuner - the JBL Tuner FM. It is easy to distinguish from other speakers - it has an external antenna, typical for radio devices.

JBL Tuner FM is equipped with a 45 mm speaker with a power of 5 W with a reproduced frequency range of 85-20000 Hz. The operating time of the device from the built-in battery is 8 hours. The speaker has a small display and a fairly clear control panel on which you can simply set up the radio - just like on a regular receiver. There are five separate buttons for storing your favorite radio stations.

All other JBL speakers cannot pick up a radio signal on their own. However, users often buy inexpensive analogues/replicas of popular devices from a famous brand - and these can just replace the radio. We talked about how to distinguish an original JBL speaker from a copy. The main criterion for determining the original will be the price - fakes are much cheaper than products on official websites like “I’ll take it!” or "M.Video".

How to tune the radio to a copy of the JBL Xtreme speaker

To explain how to turn on the radio, let's take one of the most popular JBL replicas - the JBL Xtreme speaker replica. First you need to connect a wire to the device, which will serve as an antenna to receive the signal. This can be a complete AUX or regular headphones with a 3.5 mm audio jack.

Press the Bluetooth button twice - but not quickly, but with an interval of about 2 seconds. The first time you press it, the speaker will switch to AUX (wired playback mode); the second time, it will switch to radio mode.

Next to the Bluetooth button there is a JBL Connect button - it looks like two triangles. Click on it to start tuning radio stations. When you turn on the radio for the first time, you will need to wait a little while the receiver picks up the wave.

To start the setup, press the Play/Pause button several times. The radio will begin to automatically switch and save channels. To stop the search, press the pause button again.

To switch radio stations, use the “+” and “-” buttons (short press). When you press the same keys for a long time, the sound volume will change.

JBL speaker - how to set up the radio, alternative methods

If you were unable to figure out how to turn on the radio on your JBL speaker, most likely you are the proud owner of an original device that does not support FM broadcasting. Don't despair, you can use your smartphone as a radio and simply play the content via Bluetooth.

Listen to broadcasts on the radio station's website

Google the name of your favorite radio station - it probably has its own website where the broadcast will be broadcast. Technically, in this case you are not picking up a radio signal, but simply reproducing an online broadcast through the speaker. This method has its advantages:

• You don't need an antenna wire to tune the radio.
• You can control the sound and change the wavelength remotely instead of pressing speaker buttons.

In addition, many sites allow you to rewind or skip tracks you don't like, pause playback, or listen to programs that have already been broadcast and have been archived. It’s also convenient that the names and performers of all the songs are signed online - useful if you hear something new and want to add it to your playlist.

Listen to radio through the application

Many Android smartphones have a standard FM radio application. For it to work, as in the case of a speaker, you will need an AUX cable or wired headphones. The program's interface consists of a list and saved radio stations and a wave tuning area - everything is very simple and really looks like a regular radio. This method is suitable if your Bluetooth speaker does not support radio broadcasting. Otherwise, it will be easier to plug the same wire into the speaker and set everything up as described above, without using a smartphone.

Another way to listen to the radio is to download the application of the selected station and install it on your gadget. As a rule, if a channel has its own add-on for phones, they talk about it during on-air advertising. In any case, you can simply search for it in the application store - Play Market or Apple Store. The application interface will most likely be similar to the radio station's website. For example, at Moscow's Radio 7, you can not only listen to music via your smartphone, but also read news, find out the program schedule, choose a playlist to suit your mood or a podcast from the archive.

Alexander Grishin

Do you want to enjoy your favorite music on your mobile device, but the volume and bass are not enough for you? Not sure whether you can connect your speakers to your phone via Bluetooth? Read our instructions and you will learn how to connect speakers to your phone in three different ways:

1. via Bluetooth
2. using a USB and AUX cable (if the speakers do not have their own power source)
3. using an AUX cable (if the speakers have their own power supply)

If you know how to connect, but can’t do it, at the bottom of the article we have collected recommendations that can help solve the problem.

Method 1 - via Bluetooth connection

Let's look at how to connect a Bluetooth speaker to your phone. This method is very convenient, since you don’t have to use wires when connecting.

In addition, unlike conventional speakers (for example, from a computer or music center), Bluetooth speakers are usually small in size and stylish in appearance, such as this small model from Nokia:

A big plus is also the compatibility of almost all wireless speakers and smartphones with each other, regardless of the manufacturer. For example, you can easily connect a Sony Bluetooth speaker to a Samsung phone.

Connecting Bluetooth speakers on Android and iPhone smartphones is done in the same way:

1. Turn on the speaker and activate Bluetooth on it (if it does not start automatically);
2. On your phone, go to the “Settings” (or “Options”) menu;
3. Open the Bluetooth section;
4. Move the slider of the same name to the right to activate the wireless connection and start searching for available devices;
5. After the list of devices is displayed, find the name of your speaker in it and click on it, within a few seconds the connection should occur, and the speaker should make a sound or change the color of the indicator (depending on the model);
6. Try playing music on your phone. The sound should start playing from the speaker.

If you have models from JBL, then you can connect two speakers to your phone at once!

By the way, almost all wireless speakers have a 3.5 mm jack, which means they can be connected via an AUX cable.

Method 2 - connect speakers to phone via USB and AUX?

If the speakers do not have their own power source (for example, some ancient Sven speakers) and can only be powered via USB, then to connect you will need an adapter from regular USB to mini or micro-USB (depending on your phone model), a USB cable and AUX cable.

The adapter can be purchased at any computer store. It looks something like this:

The connection is made as follows:

• Insert the adapter into the phone connector, and into it the USB cable from the speakers. Connect the other end of the USB cable to the speakers themselves. This way the phone will be used as a power source
• Connect the devices using an AUX cable.

With this connection method, it is better to use speakers with an amplifier to avoid extraneous noise and poor-quality sound.

Method 3 - via AUX cable

Another way to connect speakers is to connect them to your phone using an AUX cable that has 3.5 mm plugs at both ends. It is sold in any electronics store and looks like this:

To connect using this method, the speakers must have their own power source (battery or plug for connection to an outlet). The procedure is as follows:

1. Enable speakers
2. Insert one end of the cable into the headphone jack on the speakers
3. Insert the other end into the 3.5 mm jack on the phone
4. An icon or caption with the text “ Audio jack connected».

Ready. You can enjoy the music!

If the speaker does not connect to the phone

If the speaker does not connect to the phone via Bluetooth, or the connection occurs but there is no sound coming from the speaker, then try the following recommendations:

• First of all, restart your phone (helps many)
• Make sure that the Bluetooth mode on the speaker is activated. This can usually be seen by the indicator on the speaker, but to be sure, check the instructions.
• Make sure there are no other Bluetooth connections currently being made (for example to headphones). The phone can only connect to one gadget at a time.
• Some speakers have a “weak” Bluetooth module and only work in close proximity to the smartphone. To eliminate the influence of this fact, try connecting two devices at a minimum distance from each other.
• Reset the speaker settings. This is usually done by pressing several buttons at the same time. Combinations vary between models, so please refer to the instructions for your speaker.
• If the connection is made, but there is no sound, then try to break the connection, and then, in the phone’s Bluetooth settings menu, click on the name of the speaker, and then select “ Forget this device". After that, search for available devices again and try to connect.
• Try connecting your smartphone to another device. If it also does not connect to it, then most likely there is a malfunction in the software. In this case (if rebooting or updating the system did not help), reset your phone to factory settings.
• If none of the above helped us, then there may be a malfunction in the Bluetooh module of one of the devices. In this case, you should contact specialists.

Have you purchased modern portable speakers, but still have a vague idea of ​​how to use them? The basic package was not complete and did not come with a manual? On this page of our website you can find all the necessary and useful information regarding the features of using portable acoustics.

Why do you need a user manual?

An instruction manual is necessary for the owner of almost any equipment, if only for the simple reason that with its help you can significantly simplify the process of working with a particular acquisition, as well as significantly extend its service life.

User Guide Structure

Manuals for portable speakers contain the following sections:

• description and short list of technical properties;
• safety and precautions;
• components;
• diagrams and drawings;
• connection and start of work;
• manufacturer's warranty.

What to do if the basic configuration of the speakers does not include instructions in Russian?

The original packaging of the portable speakers did not include a user manual or was it included in a foreign language? In this case, it’s worth finding an electronic analogue in Russian or Ukrainian. This can be done on our official website - in the special section “Instructions”.

Bluetooth speakers have been gaining widespread popularity lately. Unfortunately, only half of them can be considered good models with high-quality sound. The rest is simply carbon-copy Chinese junk. Today we will look at the TOP rating of the best models of wireless Bluetooth speakers, and we will tell you how to choose and connect correctly. There will be a short but detailed review of each.

HELP! Dear readers, if your eyes are wide open and you cannot choose a column for yourself, then write in the comments and I will help you with your choice. The more detailed you describe why you need it and at what price, the more detailed the consultation you will receive.

Sony SRS-XB30 White

The LDAC codec allows you to receive data from your phone at a speed of 990 Kbps. Beautiful design and lighting will brighten up any evening. NFC connection allows you to start the device with one touch of your smartphone without any settings and start having fun.

If the battery is low, you can connect via USB and simultaneously transfer music and power. Supports connection of up to 3 devices. There is a 3.5 mm mini-jack for connection. A powerful battery with an energy consumption of 0.5 W per hour will allow you to enjoy fun and high-quality sound for a long time. Low water protection IPX5.

What guitarist, bassist or vocalist has not at one time dreamed of a amp from the legendary Marshall company. This company has been producing excellent musical equipment for many years. They did not bypass ordinary listeners by releasing a portable speaker.

First of all, I would like to note the original, classic design. The body is covered with leather, and from above you can observe the metal coils. I would like to immediately note that such a device is well suited for playing heavy music - rock and, of course, heavy metal. Quality, excellent sound and wooden body that weighs 3 kg. But the price for this model will be quite high.

Fast connection via NFC. This is a good budget model with protection from water and dust. The low frequency threshold starts at 100 Hz, which is worse than previous models, but it costs less.

The body is made of metal, although it is not clear why. Probably to make it look more expensive. In fact, the model is good, but does not hold a charge for so long. There are Micro USB and regular USB connectors for a charger. Using a 3.5mm mini jack, you can connect to the output using AUX from third-party devices. The built-in subwoofer provides low tone, bass and mid frequencies.

One of the most budget models in its class, but with excellent characteristics. Compact model, fits into a small bag. Wireless speaker with streaming audio. Supports Dual sound – connecting multiple devices.

The power is not high, since there is only one column inside, but the energy consumption is lower. As a result, it can work for up to 30 hours of continuous music. There is some protection against moisture according to the IPX7 standard. Therefore, the device is well suited for playing your favorite compositions on vacation, on a river, at sea or in the forest near a tent. I could not find the declared frequency in the Hz. You can connect the device via micro USB.

One piece of advice - if it costs more than 2000 rubles, don’t buy it, otherwise it’ll be fine for hiking and listening to music. But if you are a connoisseur and music lover in the music world, then it is better to choose a more expensive model.

Very high-quality stereo sound, allowing you to listen to your favorite songs. Built-in microphone with noise reduction for voice recording. True, I have not yet met people who use it. Weighs only half a kilogram.

A UAX cable is included. The connection can be made via USB Type-A. The battery capacity is stated as 6000 mAh, but it seems to me that this is not so, because the speaker only works for 12 hours. Protection against small particles - IPX7. Comfortable, light weight and with a great design, it will be an excellent addition to any party.

Unfortunately, there are many fakes on the Internet that are sold for 1,500 rubles or even cheaper. It is better to buy from trusted dealers and online stores. And one more thing - there is no need to experiment and pour water on it, as is often shown in advertising - this is fraught with breakdowns.

This micro speaker is designed for music lovers who like to listen to loud music outdoors while running or walking. I don’t really understand such people, but the device itself is very compact and can fit into almost any pocket.

The speaker does not have a radio receiver or fast connection via Wi-Fi or NFC. There is a slot for an SD memory card. It looks like a keychain. The case is made of durable plastic, and the top is covered with a rubber base to protect against small impacts. It is not expensive - the price is in the range of up to 1000 rubles.

Middle class wireless speakers allow for good reproduction of sound waves. Low frequencies are in the range of 100 Hz, which allows you to reproduce bass in good quality. The connection is made via Bluetooth profiles: A2DP, AVRCP, HFP, which increases the transfer speed.

There is good protection against moisture and dust getting under the case. The only negative is support for the outdated second Bluetooth standard. The case fits comfortably in the hand and feels pleasant in the palm. Compact size and light weight.

The speakerphone makes it possible to answer calls and record sound and conversations in good quality. The microphone sensitivity radius is up to 5 meters. JBL connect is a system that allows you to connect several JBL speakers to one subnet and increase the sound power, creating volume of sound.

For those who like bass and stronger, this model is especially suitable due to the low threshold of 65 Hz. Powerful battery. And now a very important point - you should not buy cheap models for 2000 or 3000 rubles, since this speaker costs more. These are all fakes.

A friend of mine once bought one of these for cheap - as a result, the battery was different in terms of the stated power, and the sound was not clear and some instruments could not be heard at all when playing songs. There are a lot of stores selling fake JBL Charge 3, be careful.

The speaker diameter is 4 cm - this is a pretty good size, providing high-quality channel sound. The case has a micro SD slot. The average rechargeable battery is 2000 mAh, allowing you to work up to 15 hours without recharging.

An interesting feature that sets it apart from others is the LED backlight located under the mesh. It can be configured using buttons on the case or turned off completely to increase operating time. And she is very beautiful and sticky. The manufacturer claims that the lower frequency limit is 20 Hz, but I have a hard time believing this, considering the price and size of the speakers. Has all inputs for connection - USB, USB, mini jak.

The sound volume in decibels is 80. There is no backlight or radio, but I think this is not a problem. Compact model that fits in a bag, briefcase or even a woman's bag. At maximum volume of the sound stream, it can work for 12 hours without recharging.

If we compare it with other JBL models, this is most likely a middling product between the JBL Charge 2 Plus and JBL Charge 3. It has high-quality sound with good deep bass. A high-quality lithium-ion battery will last for many years. The body is made in a standard barrel shape and covered with high-quality materials to protect the insides from moisture.

Powerful and high-quality sound at 25 W. The body looks less like a barrel and more like a can, which attracts many buyers. Despite the cheap price, the quality of the model is above average. Yes, it does not have backlighting or radio, but all types of connections are present.

At the end of the case there are convenient stylish buttons for control. Please note that with such a powerful sound, it lasts quite a long time - 15 hours in a row. This is due to a high-quality 5200 mAh lithium-ion battery. The set includes a stylish case to protect the speaker from external influences.

Very loud model – 80 dB. The main speaker has a diameter of 63 mm and is designed for low frequencies, the second, half the size of 35 mm, is needed for high-quality reproduction of high and medium frequencies of sound. IPX5 protection allows you to take it and use it even in the most extreme conditions.

The body and internal parts are completely protected from the ingress of small particles. Supports wide Bluetooth profiles – A2DP, AVRCP, HFP, HSP. Weighs almost two kilograms due to a high-quality sound amplifier. True, it is quite expensive - around 10 thousand.

It looks like a woman's handbag, but in terms of characteristics and power it is far from girlish. Good quality material, can withstand small impacts. The buttons are located at the top. The most interesting thing is that the recharge can come from the mains, since the kit includes a power supply.

A large device with one tweeter 9 cm in diameter, and a second woofer 45 mm in diameter. You can connect 3 different devices at once. Very loud device - 80 dB. True, because of this, the operating time decreases - only 8 hours. I couldn't find the battery capacity, so if anyone has this information, write it in the comments.

The built-in player supports MP3, WMA, AAC formats. The aluminum case provides a little protection from impacts, but in reality it is of no use. But the model is budget and not bad for ordinary get-togethers.

The sound isn't too loud, but it doesn't put a strain on the battery either. I don’t really like the design, but as practice has shown on the Internet, many people like this look. What pleased me were the comments and reviews, many are satisfied with the model and the average rating is above 4.

The built-in radio receiver allows you to catch the entire spectrum of FM frequencies. The player supports formats: WMA, APE, FLAC, MP3, WAV. The body is made of durable plastic. The maximum sound flow power is 70 decibels.

Very high quality sound, but there is a small drawback in the low battery capacity. It’s still not clear why it was impossible to install a larger battery. The cost is below average, so everyone can afford it. It has standard USB & mini 3.5 mm Jack inputs, allowing you to connect AUX directly to a smartphone, tablet or computer.

Another model in the same style as the last one. Quite an ambiguous design. Volume level at maximum load is 75 dB. The battery is not weak for such a small size and compactness. Pay attention to the dimensions - it is very small and at the same time costs less than similar speakers.

Support for Bluetooth profiles – A2DP, AVRCP, HFP, HSP, allows you to quickly transfer information from the sending device without interference or signal loss. There is an additional connector for micro-USB charging and music transfer.

Compact, small speaker. High frequencies are slightly higher than other models. So, SVEN 2.0 is well suited for listening to classical, hip-hop and pop music. A powerful rechargeable battery allows you to listen to your favorite songs for 20 hours.

Inside there are two speakers of 5 watts each, which makes the sound a little bigger. You can connect a flash drive with music to the USB connector and listen to your favorite tracks. The price is even a little low for this model, despite all its advantages.

Good low frequency range - up to 50 Hz, gives a rich bass tone. Supports 20 thousand Hz at a high level, which allows you to hear high-quality sounds and the whole range of clicking and whistling sounds. Harman Kardon Connect+ allows you to connect up to 50 of the same speakers to one network.

It is possible to connect SIRI or a similar audio assistant from your phone. There is a bass driver with a diameter of 75 mm and a secondary speaker with a diameter of 15 mm. High-quality materials will last for many years, but the price is appropriate. Interesting plate-shaped design.

Detailed, rich sound in such a small size. Easily fits in any bag. I really like the design, which is mixed with classics, but at the same time has a touch of hi-tech. The battery has suitable power for this size and lasts for a long playing time.

A friend of mine uses it as the main one for listening to music on a PC. Despite the fact that there is only one, the sound is surround due to two built-in speakers. Mini jack 3.5 and micro USB are present.

Cheap and at the same time beautiful model. The declared low frequency range is only 160, but when listening you don’t feel any errors in the sound, and the low frequencies are also good. The battery is slightly more powerful than the previous model at 100 mAh. 6 W is enough to cover a room of 20 square meters.

The manufacturer has made it a little quieter, and at the same time the charge lasts up to 20 hours in a row, at full power. A good option to take it on a long hike to listen to jazz and blues. There is weak protection against moisture – IPx6. The rubberized case does not scratch and protects against minor impacts.

Tiny but very loud speaker at 80 dB. Designed for portable listening. Low frequencies do not cover the entire range, but here you need to take into account that the model has small dimensions of both the body and the speaker. Easily fits into a jacket pocket; if desired, you can stuff it into your pants.

It looks like a keychain that can be attached to your pants or bag. On top there is a carabiner made of durable but lightweight metal. Some pictures show how the column is thrown into water, and it supposedly works, but it is better not to do this. Yes, it is protected from moisture, but direct immersion in water will be lethal.

Loud five-kilogram boommox. It’s difficult to call this a speaker, since it is a full-fledged speaker system. The powerful battery allows you to keep the charge almost all day. Reviews often write that the model provides high-quality, deep sound. Low and high frequencies are not cut, but sound as they are. True, such a device is expensive.

Rating according to users

Below is a table of ratings. All data is taken from various top online stores. You need to understand that in addition to ratings, you need to take into account reviews. But they also need to be assessed with a level head, since people are different and can underestimate the value of something that is not on the merits. Also, the rating usually decreases due to the fact that people take the model right away without choosing it to suit their preferences.

REQUEST! Dear readers, please write your review of the model you purchased below in the comments. This information will be useful to new readers and for manufacturers who regularly access our portal.

How to choose the right one based on characteristics?

As a rule, a Bluetooth speaker is more suitable for hiking, tourism, the sea, the beach - where installing a speaker system is problematic. Although I know several people who listen to music at home from portable speakers.

Hertz

And so, first of all, you need to look at the sound quality, this is where the serpent of complexity lies, because until you buy a speaker and listen, you won’t understand.

Therefore, it will be based on the declared frequency. As you probably noticed, almost all of them work with a high threshold of 20,000 Hz, but with low frequencies, things are much more complicated. Without the bottom, the music will sound very dull. As a rule, even with a full range, instruments do not always sound as they should. Here you also need to take into account the quality of the track recording - that is, at what speed the playback is taking place, as well as from the playback device.

NOTE! Music lovers will understand me. I recently bought myself a sound card for my computer. I took an external one, in the middle price category. I used to have a regular, built-in one, which unfortunately burned out. So, when I connected the new audio speaker, I gasped - since many sounds were simply not audible before. What I mean is that a lot also depends on your phone, tablet or PC.

Try to choose speakers up to 100 Hz at the lower threshold. But if they are tiny, then there is no point in waiting for high-quality lows, since the low frequency depends on the diameter of the speaker.

Battery

Next we look at the battery. On average, portable speakers have the same batteries as hoverboards and have a capacity of 3000-4000 mAh. But here we must also take into account energy consumption. The louder we turn it on, the less time it will work on one charge. Plus, I wouldn’t recommend buying one with backlighting, as it puts an additional load on the battery, which drains it faster.

Bluetooth version

Now let's look at Bluetooth. Modern models work with versions 4 and higher, the average one with version 3. The higher the version, the wider the range in meters, the less power consumption when receiving a signal. So the information packets will be much larger, and the sound quality depends on this. The best option is 4.0 - 4.3, or higher.

Sound power

What is Watt? Roughly speaking, this is the power of the speakers at maximum. That is, what pressure can they create per square meter. If you need a loud model, then it would be good to take 15 watts higher. For home even 10 will do. If you want it to be really loud in nature – 25 and above. But this reduces the charge life.

Here you need to take into account the size of the speakers, as well as their number. The best option is two or more speakers. One is used to reproduce low frequencies, and the second is a speaker for high frequencies. Typically, single-driver speakers sound a little worse.

Protection

As a rule, wireless speakers are protected from moisture and dust. This allows the device to work quietly near water bodies in nature. Now I’ll tell you a little about IPXY protection. The first digit X indicates that there is protection against physical fine particles. The second Y indicates moisture resistance.

Additional connectors

If you will use it at home, it is better to take it with a separate connector for power. Although it can be powered from USB or Micro USB. You can also make a direct connection to these ports from a phone, tablet or laptop to stream music, but as a rule this is not necessary.

USB Type A is the ability to connect USB drives with music and play them on a speaker. For small speakers there is a separate SD input for a memory card. It works on the same principle - you insert a media with songs and enjoy your favorite compositions.

How to connect

Laptop

I would like to note right away that not all laptops have Bluetooth. Also, some people buy modules for PCs separately. You can see our selection here.

NOTE! A code may be required to connect to the speaker. It is indicated on the label on the column or in the manual.

1. Turn it on with the key combination Fn + F3. Or in the tray in the lower right corner of the screen, if the Bluetooth module is not built-in.

1. Next, turn on Bluetooth on the speaker. This is done by pressing a button on the control panel of the device.
2. Now you need to find the speaker in the available devices of the laptop and make a connection. After that, turn on the music and enjoy.

On the phone

In the 21st century, almost all smartphones and tablets have a Bluetooth module, which is included immediately in the package. To enable, follow the instructions:

1. Turn on bluetooth on your phone;
2. Now on the column;
3. We are looking for a device among all those available on a smartphone. Usually the column will have the name of its model, so you won't get confused.
4. Let's connect.
5. Turn on the music and listen.

Connection via AUX

An AUX wire is included in almost any configuration. It looks like a double 3.5 mm mini-jack on one side and the other.

The connection is quite simple. We insert one end into the connector on the PC (OUT type), laptop (headphones, if there is no other input) or into the headphone input on the smartphone. Next, we simply turn on the speaker, and then the music. The computer should automatically detect the type of output (speaker).

A portable Bluetooth speaker is a compact device for increasing the volume of the sound of a playback device and playing audio files. It can be connected to a computer, audio system, smartphone and almost any gadget via Bluetooth connection or using a 3.5 mm mini jack to enjoy music anytime and anywhere.

The principle of operation of a Bluetooth speaker

The operating principle of a Bluetooth speaker is not very different from how standard audio devices work. Most often, speakers with neodymium magnets with a power of 2 W and an amplifier of up to 3 W are used. A mandatory attribute of the device is a mini-USB connector on the side panel, as well as charging and power indicators. Some models have a clock display added. Mid-priced devices have a lithium battery, while more expensive models have lithium-ion batteries.

Scheme of operation of the JBL Flip 3 portable speaker

Types of connections

Despite the fact that the main format for using a portable audio device is a wireless connection, it also has an input connector for a 3.5 mm cable for a wired connection.

Via Bluetooth

To connect the speaker to the device, you need to start it in BT mode, after which it will become available on all laptops, smartphones and tablets with Bluetooth enabled. In the list of found devices, you need to select the name of the speaker to pair both devices and wait for the connection. All data necessary for playing audio recordings is transmitted over a distance of up to 10 meters.

Some devices are capable of transmitting a signal over 15-30 meters.

Via audio cable

Most speaker models have an audio input for a 3.5 mm jack cable. Some devices are equipped with a 2.5 mm connector for a mini-jack cable. This parameter must be indicated on the product packaging.

To connect, you need to insert one end of the cable into the speaker connector, and the other into the connector of the connected device: laptop or computer. In some cases, you will need to detect the speaker system in Windows settings if this operating system is installed on your computer.

Portable JBL speaker with micro-USB connector and mini-jack 3.5 mm

Methods of connecting to different devices and step-by-step instructions

The method of connecting a portable audio speaker depends on the type of playback device, whether it has Bluetooth functionality or a connector for a wired connection.

How to connect to a computer and laptop

Before connecting speakers to your laptop, you need to make sure that Bluetooth is turned on. Speakers usually have an on/off switch that must be held for a few seconds to activate the wireless transmission feature. There are also devices in which the pairing function starts automatically for a few seconds or minutes after turning on.

JBL portable speaker control panel

When the speakers are ready to pair, a flashing light will appear. Now you need to click “Start”, go to the “Settings” section of the computer menu, selecting “Devices” to see a list of all installed devices. On the left there is a list where, among other things, a Bluetooth icon will be displayed, which you need to click on so that the laptop starts searching for devices with which it can pair.

If the computer cannot find the speakers, you may need to repeat the procedure. Many models are programmed to automatically disable pairing after a period of time if no suitable device has been found to connect to. If the speakers are found, you need to select them in the list of devices and click “Connect”.

Sometimes additional authorization is required. This is necessary to confirm that the user wants to connect the devices themselves, and not someone trying to hack the computer via Bluetooth. There are several authorization methods, but most often you need to enter the appropriate code specified in the user manual or on the device sticker.

If the required code is not on the box, you can try entering the password “0000” or “1111”. This works in cases where the manufacturer installs the code on the devices themselves. Pairing occurs only after authorization. After connecting the speakers, they will be available in the menu of the “Settings” section, and then “Devices”.

How to connect to a phone or tablet

Connecting Bluetooth speakers to mobile devices is easier than connecting to a laptop, or even more so a stationary PC, which requires a wired connection or installation of a Bluetooth module. To pair the speaker with your phone or tablet, you will need to follow a few simple steps:

1. Go to the “Settings” menu section of your phone.
2. Open the “Bluetooth” tab.
3. Select the “Enable Bluetooth” option.

After completing the steps described above, a list of devices available for pairing will open. If the name of your portable audio device does not appear in the list, you can find it by using the search function. After the equipment is connected, the smartphone will save its name in the list of available devices and the next time it is connected there will be no need to search.

How to connect to TV

The first thing you need to do when connecting a Bluetooth speaker to your TV is to check whether it supports such a connection. Many modern TVs support wireless connectivity, eliminating the need to purchase an external module. To pair with speakers, you need to select the “Connected devices” item in the main menu and find the “Bluetooth” section. After this, you need to activate the function and search for devices to connect.

If the TV does not support the wireless connection function, you need to inspect the back panel of the TV, where the 3.5 mm jacks are located. The presence and type of audio connectors determines what type of external Bluetooth module is needed. The external module is connected to the corresponding connector and switched to pairing mode by holding the connection button on the speaker.

The TV will automatically recognize that a device is connected to one of its audio outputs, so the user will not need to make any additional settings. If this is not the case, you need to refer to the user manual and find a way to change the audio output.

If you need to use two Bluetooth speakers, you need to find a transmitter that is compatible with multiple outputs. A good example of such a device is Avantree Priva or Miccus Mini Jack TX4.

How to connect speakers to each other

To connect two speakers to one gadget, you will need devices of the same model or brand. The connection type depends on the device, OS used by the phone, computer or tablet. In most cases, pairing Bluetooth speakers works like this:

• two speakers are connected to each other by a 3.5 mm jack cord with an adapter;
• one of the devices is connected to the gadget.

There are several apps that you can use to connect multiple Bluetooth speakers. These are AmpMe, Bose Connect and Ultimate Ears, which have a PartyUp mode. AmpMe is the most universal as it is brand agnostic, while the Bose and Ultimate Ears apps only require a device from the company in question.

AmpMe is an app that can sync smartphones and Bluetooth speakers to stream audio from SoundCloud, Spotify, YouTube, or users' own music library.

Some systems require connection via an app, but others, like JBL, can use multiple audio speakers without the need for third-party software.

Setting up a JBL Bluetooth speaker

JBL is one of the popular brands of audio equipment, whose website contains detailed descriptions of connecting Bluetooth speakers for all models of the manufacturer. To pair devices you need to follow these steps:

1. Put the speakers into discovery mode by following the steps in the user manual. The Bluetooth feature may remain available for 60 seconds before needing to be activated again.
2. Enable Bluetooth discovery mode on your laptop, tablet or smartphone depending on the operating system (Windows, Mac, Linux).

After activating the system, the name of the audio speaker will appear in the list of devices available for pairing. To connect several speakers to a laptop or smartphone at once, you need to perform several steps:

1. Turn on the JBL speaker. The device must be put into pairing mode by pressing and holding the Bluetooth button for 3 seconds.
2. Play music on your first device. To play music, you can use any cloud service or your own media library.
3. Press the Connect button on all speakers. The button is shaped like an hourglass, and before pressing it you need to place all the speakers next to each other.
4. Wait for connection. The speakers will be connected within 30 seconds. Once this is done, the music will start playing through both speakers.

If you need to disconnect from any of the speakers, you need to click the “Connect” button next to the name of the desired device again.

How to turn on the bass

To turn on the bass on JBL speakers, you need to simultaneously press the Bluetooth function activation and volume down buttons. It is not recommended to listen to music in this mode all the time - it can damage the speaker.

How to turn on the radio

To tune the radio on the speaker, you need to insert a USB cable into it, which acts as an antenna. After this, you need to press the power button and the adjacent button with the hourglass sign to turn on the radio. It is configured using the Play / Stop buttons, and the search for radio stations is carried out using the plus and minus buttons.

How to connect a flash drive

Some models of JBL portable speakers do not have the ability to connect a USB flash drive: they play music only via Bluetooth, Wi/Fi, or via a wire with a 3.5 Jack connector. New models are equipped with a USB connector, which is located on the side panel of the device under a thick rubber cover. After connecting the flash drive, the device will automatically play the audio tracks that are on it.

Charging a Bluetooth speaker

The device is charged by connecting it to a computer, laptop or network adapter with a micro USB connector.

Basic connection errors and measures to eliminate them

Connecting a wireless speaker does not require special knowledge and takes no more than 5 minutes. But sometimes users are faced with the fact that the Bluetooth speaker does not work and there are a variety of reasons for this.

The speaker is too far from the playback device

Each Bluetooth device has its own operating range. A small speaker works smoothly at a distance of up to 10 meters, and some even at a distance of 25 meters from the device. But cheaper models often have problems with signal reception after moving several meters away from the playback device. In addition, the connection may be disrupted by a natural obstacle such as a concrete wall. You can check if the distance between the devices is too large or if there are any obstacles on their route by reading the instructions.

Frequency interference

Wi-Fi, mobile phone, microwave oven are devices operating in the 2.4 GHz or 5 GHz frequency range and may therefore negatively affect the operation of the Bluetooth speaker. To identify this negative factor, you need to turn on the speaker and place it next to one of the potential interfering devices. If your music is noisy, you may need to change the frequency settings for sending and receiving data on your playback device and speaker so that they are not operating at the same frequencies.

Incorrectly connected speaker

If the device is paired with a computer or laptop, it may periodically lose connection with it due to improper connection. Updating your connection is as simple as unchecking the headset in the connected devices window and instead clicking on the wireless speaker's audio settings, selecting the desired configuration.

Cache full

If problems arise in the operation of the Bluetooth speaker when it is connected to a mobile phone or tablet, the reason is probably that the device’s RAM is full. You need to remove all unnecessary files and programs that hinder the operation of your phone and its wireless connection to the speaker.

Outdated software

The speaker may have outdated software that is unsuitable for connecting to a newer model of smartphone, tablet or laptop. To fix the problem, you need to check the drivers on the manufacturer’s website, install the necessary updates and reconnect to the playback device.

Portable Bluetooth speakers are suitable for listening to music anytime and anywhere, and their advantage is their compact size and lightness. They connect to any gadget with an existing Bluetooth function, USB connector or 3.5mm jack. They do not require a wired connection, and can be charged via a cable by connecting a power supply or battery.