How to connect an Android watch to an iPhone? Video. Q50 Setup and Operation Instructions


Good day. Today we will tell you how to properly connect a smart watch KW88 To android device. There doesn’t seem to be anything complicated about connecting, but some users have questions about connecting, so we’ll also look into it possible mistakes in the operation of the mobile application from this watch. As a rule, after ordering a watch, you start it and start admiring it, but the moment comes when you need to connect it to the phone and then the questions begin. When this watch arrived, there was nothing except the box and a screwdriver, and I had no idea how to connect it, so I started conducting experiments. First of all, I went into the settings on the watch, turned on bluetooth on both devices and started searching. When I found the devices and decided to pair them, the watch connected, but information about notifications and calls was not received from the smartphone. After that, I began to study the watch settings, during the course I noticed that there was a special section called " Mobile Assistant", with this assistant you can download special application. I downloaded the application to my smartphone and started connecting the watch to the smartphone via mobile app, but nothing worked, since the application crashed or simply stopped when trying to connect the device. So there was a mistake that most people encounter. To connect them, you need to remove the application that you downloaded from your device, then go to bluetooth in your watch and phone and delete the paired devices. We then proceed according to the instructions, which I will describe below.

First of all, you need to go to Google Play and download the application. In the search for the market, I simply wrote " KW88"and the application itself is called " Sinwear"Download and wait for installation. After that, make sure that Bluetooth is turned on on both devices."

How to enable Bluetooth on KW88 smart watch?

We turn on the watch, swipe across the screen, and a menu appears in front of us. Scroll down in the menu and look for " Settings"


In the settings, we need to find the section " To plug", find and go to it. Next you need to go to the bluetooth tab and move the lever to the on position.





We do everything as shown in the pictures above and your application will stop crashing and will connect without any problems. Then you can customize the application for yourself.

That's all, thank you for your attention. If you have any questions about connecting, ask them in the comments below!

Preliminary setup of children's units will ensure their smooth and uninterrupted operation. This device will help parents always know where their kids are.

Device characteristics

Correct setup of nurseries is the key to smooth operation. But first, you should familiarize yourself with the basic characteristics of the device. This:

  • the diagonal of the monochrome OLED display is 0.9 inches;
  • resolution 64 by 128 pixels;
  • 364 megahertz processor;
  • there is a microphone and speaker;
  • micro SIM connector;
  • supported Mobile Internet;
  • the device is equipped with geolocation sensors, hand-held sensors and an accelerometer;
  • battery capacity 400 mAh;
  • the case is made of plastic, and the strap is made of hypoallergenic silicone;
  • operating time is 4 days, and talk time is 6 hours;
  • dimensions - 52/31/12;
  • weight - 40 grams;
  • there is protection against impacts and splashes of water;
  • compatible with operating rooms iOS systems(from 6.0) and Android (from 4.0).

Appearance of the device

Proper setting of the Q50 children's watch requires careful consideration appearance. So, you should pay attention to the following characteristics:

  • the body has decor in the form of extruded paws;
  • black and white screen with rounded corners;
  • on the right side there are power and speed dial buttons;
  • on the left side there is a connector for the charger, as well as an emergency call button;
  • The back panel of the watch is equipped with a watch removal sensor;
  • display shows current time, date, network signal, battery level, and the number of steps taken by the child.

Program for Q50 watch

In order for parents to set up a smart watch and receive information about the child’s location, they need special program SeTracker, which can be installed on your smartphone for free. It performs the following main functions:

  • exchange of voice messages between a smartphone and a watch;
  • card with a child’s location sensor (information about the charge level is also displayed here smart watch);
  • viewing information about the number of steps taken;
  • recording the route of movement, which can be displayed both statically and dynamically;
  • all device operation settings;
  • setting a zone in which a child is allowed to be (when he leaves it, parents receive a corresponding notification);
  • the ability to send virtual hearts to your child as encouragement;
  • an event log that saves all actions performed on the watch;
  • setting alarms or reminders that will be displayed on the watch;
  • the ability to search for watches if they are lost.

Selecting a mobile operator

A prerequisite for the operation of such a device as a children's watch with the Q50 tracker is the presence of a SIM card mobile operator. A number of requirements are put forward to it, namely:

How to set the clock

Setting up the Q50 children's watch is a rather lengthy and complex process that requires time and concentration. So, if you purchased a similar device for your child, before starting work you should perform the following steps:

  • using the screwdriver included in the delivery, remove back cover, insert the SIM card into the module and screw the bolts back;
  • install the SeTracker application on your smartphone or tablet; go through the registration procedure (you need to enter your phone number, address Email and access password);
  • select the region of operation "Europe and Africa"; in the window that opens, fill in the appropriate fields:
    • Device ID is a 10-digit code that is printed on the back of the watch;
    • login is a combination of phone number and email that will be used to enter the program;
    • The child's name is needed in order to display it on the map;
    • then enter phone number, assigned to the SIM card that is installed in the clock module;
    • password to enter the program (you will need to enter it twice);
  • Click the "OK" button and go to the main application settings, which include the following items:
    • SOS - enter 3 phone numbers that can be reached by pressing the emergency and quick call buttons;
    • "Back call" - you need to enter your number in this field so that, without the child’s knowledge, the watch will make a call on its own (so that parents can hear what is happening around the child);
    • "Operating mode" is the frequency with which requests for the child's whereabouts will be made;
    • “Do not disturb” - times during which calls to the watch are not possible (for example, during classes);
    • “Message settings” - you need to enter your phone number again to which notifications will be sent;
    • "Allowed numbers" - 10 phone numbers from which calls to the watch can be made;
    • "Phone book" - numbers that the child can call using the watch;
    • setting language and time parameters;
    • activation of the hand-held sensor.

Why Q50 is better than a cell phone

With the advent of mobile phones, it has become much easier to monitor children and determine their location. However, in terms of functionality, they cannot compare with a device like the Q50 watch. The instructions contain information about many functions that are not available to the phone. So, the disadvantages of a smartphone and the advantages of a watch can be presented as follows.

Phone or smartphone Smart watch with tracker
  • children tend to follow fashion, having modern smartphones, which, in turn, attract the attention of robbers;
  • because of games and others additional programs, the phone can quickly discharge at the most inopportune moment;
  • using the Internet and other functions, the child may be distracted during lessons;
  • the possibility of calls from strangers (including scammers) cannot be ruled out;
  • There is a high risk of losing an expensive gadget.
  • in order to contact parents in an emergency, just press one button;
  • Parents receive notifications about all the child’s actions that go beyond the established rules;
  • outgoing and incoming calls are allowed only for those contacts entered in the phone book;
  • when the charge drops to a critical level, parents receive an SMS reminder to connect the battery to a power source;
  • a child cannot independently turn off the Q50 GPS watch;
  • The watch is securely attached to the hand, and therefore it will not interfere with active games and will not get lost.

How to recognize a fake

Children's smart watch Q50 is a sought-after product that is becoming more and more popular every day. In this regard, more and more low-quality fakes are appearing on the market. In order not to fall for the tricks of scammers and buy a truly high-quality product, you should know the following:

  • fake watches may not work in Russia and other CIS countries, since they are “wired” exclusively for operation in China;
  • Unlicensed copies have the same ID, but real watches have an individual ID;
  • real children's watches with the Q50 tracker have a bright display, the clarity of the image does not depend on viewing angles;
  • in the original version of the watch there is always an option to select the Russian language, while the fake version only has a Chinese interface;
  • You can outwardly distinguish an original from a fake by color (for a fake gadget different elements may vary in color);
  • if a smartwatch has distortions and gaps, then most likely it is fake;
  • high-quality sound without interference is provided only by the original version of the smartwatch;
  • For fake watches, the sensor for removing the device from your hand does not always work (sometimes it is completely absent);
  • fake watches that have not undergone appropriate testing are characterized by increased levels of radioactive radiation;
  • A low-quality battery may explode, causing not only damage to the device, but also injury.

How not to buy a fake

The Q50 watch phone is a useful and simply necessary device for modern children. However, only the original device. To reduce the risk of purchasing a counterfeit, follow these rules:

  • If we're talking about about a stationary outlet, give preference to trusted places with a good reputation;
  • if one of your friends has already made such a purchase, carefully inspect the gadget - if there are no signs of counterfeit, ask for advice regarding the place of purchase;
  • study as many reviews as possible in video format to have an idea of ​​what the original product looks like;
  • when ordering goods on the Internet, give preference only to trusted resources (even if the cost of the goods will be higher);
  • do not trust sellers who offer you a similar product for less than 3,000 rubles;
  • require that upon purchase you be provided with full package documents, namely:
    • quality certificate;
    • certificate of receipt by the seller of accreditation and its inclusion in the appropriate register;
    • warranty card for a period of at least 12 months;
    • instructions for the product in Russian;
    • sales receipt with all necessary details and stamp.

Common questions from parents

It is not surprising that parents have certain concerns about any gadgets that their child interacts with. So, some questions arise in connection with the use of:

Question Answer
Is there a risk of the clock signal disappearing?Signal loss is possible only if there is no cellular in the place where the child is. In any case, parents receive an SMS notification with the coordinates of the place where the signal was lost.
Is it possible to observe the history of movements?The beacon on the map shows the child's movement in real time. It is also possible to view the history.
Will the child know that he is being monitored?A smart watch can be presented to a child as a fashion accessory and means of emergency communication with parents. Nevertheless, the level of technical literacy of modern children contributes to the fact that the child can guess about additional functions devices.
How long does the battery last?Depending on the intensity of use of the device, the battery lasts from 1 to 3 days.
What is the product package?In addition to the watch itself, the branded box also contains a charger and instructions in different languages.
How does the secret call feature work?In order to use this function, you need to enter your phone number in the appropriate program. Thus, without the child’s knowledge, a forced call will be made from the watch to the parents’ phone. By answering the call, you will hear everything that happens. In turn, the child will not hear you.
What is the button for? SOS? In an emergency situation, when a child has difficulty finding his way, it will be enough to press just one button to contact his parents. You can attach 3 numbers to this function. If you fail to reach one of them, the watch will immediately forward the call to another. This will happen until one of the parents answers the call.

Positive reviews

A gadget like the Q50, a children's watch, is quite in demand. Reviews about this product contain a number of positive comments, namely:

  • excellent satellite signal reception;
  • in case of low battery, a corresponding SMS notification is sent to the phone;
  • at active use Battery charge lasts up to 4 days;
  • good audibility during a conversation;
  • in addition to navigation, there are many useful additional functions;
  • The kit includes a small screwdriver, which may be useful in case of breakdown;
  • soft silicone grips your hand comfortably;
  • convenient control from a smartphone using a special program;
  • if a child takes off his watch, an SMS notification is sent;
  • if the watch is lost, you can use the search function (it will start beeping);
  • has a built-in pedometer;
  • when a child leaves the permissible zone, parents receive an alert;
  • it is possible to send voice messages;
  • fast battery charging (about an hour).

Negative reviews

Despite a lot of positive characteristics, you should not neglect the disadvantages of such a device as the children's Q50. User comments contain the following information:

  • there are many fakes on the market that are quite difficult to distinguish from the original at first glance;
  • the silicone from which the strap is made gets dirty quickly;
  • The connector plug for the charger is not firmly attached;
  • the markings on the keys are quickly erased;
  • when the device is not outdoors, but indoors, localization may be inaccurate;
  • the battery is not securely fastened;
  • in order to insert a SIM card into the watch, you need to unscrew it (it’s good that a mini-screwdriver is included in the kit);
  • The watch can only be charged from a computer (no power adapter is provided);
  • V notebook You can enter no more than 10 contacts;
  • poor audibility during phone calls.

Conclusion

IN modern world The Q50 is a must-have. Modern children quickly get used to independence and do not tolerate interference in their personal space. And as for mobile phone or a smartphone, it is not always convenient to carry it with you (especially for active children). In this situation, a smart children's watch with a tracker will come to the rescue. For parents, this is a way to always be aware of the whereabouts of their child, and for children it is a stylish and useful accessory.

Detailed instructions for self-configuration children's watch Q50, as well as full information on their use.

Q50 setup instructions

The Q50 watch kit includes a watch, charger, screwdriver and instructions.

☀ Purchase a Micro-SIM from a telecom operator in advance: Beeline or Megafon for stable, proper operation.
The SIM card tariff must be with mobile Internet.
Tele2 operator SIM card is not suitable due to technical features.
MTS operator SIM card often causes a “Waiting” error due to support for 4G networks.
Pre-install the SIM card in the phone, check the availability of the Internet, the absence paid subscriptions and PIN code.
Install the SIM card into the watch by first twisting the back metal cover and carefully lifting the battery, being careful with the wires.

☀ Install the application on your smartphone for operating system Android or iOS.
Application name "SeTracker".

The application is easy to find by scanning the QR code.

☀ Launch the application and register the unique ID indicated on the metal cover of the watch under the barcode.
Next, register your username and password. One login can be used for different smartphones, for example, if both mom and dad are watching the child.
You can fill in additional fields in your profile, but they do not play a big role.
In the telephone field, enter a number to restore your credentials in case you forget or lose them.

Q50 Operating Instructions

First of all, you need to look at the clock and figure out what symbols exist on the main screen.
The central part of the screen is used for the clock and date, information is obtained automatically from mobile operator, there is no need to set it manually.
Given the appropriate characteristics of a correctly selected tariff and the availability of mobile Internet, no operational difficulties were observed.

  • GSM icon indicating the presence of mobile cellular communications.
  • Quality Level Icon mobile communications GSM.
  • EDGE icon - add-on GPRS system, more modern and reliable.
  • GPS icon - satellite system navigation, which helps to determine the location of the child. The dot inside indicates that communication with the satellite has been established.
  • Battery indicator. Clearly shows the charge level of the device.
  • System of rewards and incentives. Using the application, electronic hearts are sent from your smartphone to your watch, signaling your child that you care. Near the heart are numbers that count the awards.
  • The icon indicates the number of voice messages received on the child’s watch. A voice message can be sent via a smartphone application, lasting no more than 15 seconds. You can listen to the message on the watch using the "SOS" button.
  • Indicator for removing the watch from your hand. The icon appears on the watch, and a message about the withdrawal is instantly sent to the application for mom and dad on their smartphone.
  • Baby step counter.

SeTracker application

☀ The SeTracker application, by installing and registering in it, allows you to remotely control a watch of any model without much difficulty. Lightweight and clear interface with the main functionality We'll look at this in more detail below.

☀ Voice messages: send a voice message from the parents' smartphone to the child's watch, while saving it in the application.
The message duration cannot exceed 15 seconds.
After the watch receives a message, the microphone icon and the number of received messages will light up.
The child will be able to listen to the message on the watch using the "SOS" button.
You can send a response voice message by recording by pressing and holding the "Power" button.

☀ Map, where is the baby?: real-time location of the clock on the map.
By default, information is updated automatically every 3 minutes. Clicking the "Find" button will clarify the child's location at a given second.
Also on the map you can see what technology was used to transmit the information: red indicator - reports GPS navigation, blue indicator - base station, green illuminated - WiFi mode.

☀ Health: will tell caring parents about the number of steps taken by the child, calories burned, distance traveled and even time spent watching colorful dreams. By default, sleep time is set from 22:00 to 7:00. Each option has own settings, such as weights in kilograms and step distance in centimeters.

☀ Reports: history of the child’s movements, with the ability to edit the time period and view it on the map.

☀ Settings:
☀ SOS number: set 3 SOS numbers, and the watch, when you press the “SOS” button for a long time for more than 3 seconds, will start calling first to one number and, if the phone is not picked up, then to the remaining two numbers. Button "1" on the watch corresponds to SOS number "1", button "2" on the watch corresponds to SOS number "2", phone number "3" in the application is an additional emergency number.
☀ Call back: one-way communication with the clock. Here the number is entered and sent to the watch, within 10 seconds the watch calls back to specified number, without giving the appearance of work. This is a quiet call, this is where parents can hear what is happening around the child. Also, this function can help in finding lost watches without revealing yourself to passersby.
☀ Geolocation operating mode: the time period after which the child’s location will be requested. Normal mode requests location every 600 seconds, economical - 3600 seconds, constant - 10 seconds. The more often the request occurs, the greater the energy consumption.
☀ Contextual model: appears according to the watch model, allowing you to change the loud call sound to vibration or complete silence.
☀ Do not disturb: Set the time during which the watch will not receive incoming calls.
☀ Setting up messages: the SMS number is required to receive system messages about the low charge of the watch less than 20%, pressing the "SOS" button and a message about removing the watch from your hand. All messages will be collected in the "Messages" section.
☀ Mark friends: list of friends, list of watches with which your child’s watch has become friends.
☀ Allowed numbers: specify 10 numbers that the watch can call. These could be neighbors, familiar children or teachers, for example.
☀ Phone book: enter 10 numbers of your child’s relatives and friends, sign a name for each number, it will be displayed on the watch when a call arrives.
☀ Language and time: set the language and time zone.
☀ APN setting: editing function apn settings on the clock. - IN this moment does not function properly, please wait for an update.
☀ Hand removal sensor: if this function is enabled, the watch will signal if the watch is not on the child’s hand for more than 3 minutes. The sensor on the inside of the watch directly touches the hand, so as soon as the sensor stops feeling the child’s hand, it notifies mom and dad.
☀ LBS: thanks to this service you can get operational information about the location of the clock, based on the signal strength to the nearest base stations operator.
☀ Remote shutdown: after specifying the main number, the child will not be able to turn off the watch himself. Turning off the watch is only possible using this function, remotely from the application.
☀ Restoring the operating mode: resetting the clock settings, setting them to working condition default.

☀ Geofence: territorial restriction of a child’s movements in the area. In the settings, set the radius of the zone, upon crossing which you will receive a message that the child has left the safe area.

☀ Rewards: electronic hearts that are immediately sent to the watch when sent. This function is a nice addition and cannot but please your child and you in particular. The child will always know when his mother misses him or blows him a kiss.

☀ Message: system messages. Here you will see important events, occurring with the watch on the child’s hand: low charge watch, leaving the geofence, removing the watch from your hand and others.

☀ Alarm clock: 3 alarms can be set.

☀ Where to find the watch: the function helps to find the watch if, for example, a child took it off upon arriving home and forgot where he put it. The command "Where can I find it?" will result in a minute clock signal, which can be turned off with any button.

IMPORTANT:
Monitor your watch's positive balance through Personal Area Your telecom operator or another way.
When the mobile Internet expires, the connection with the watch is instantly lost.

Setting clock settings via SMS

By using short messages SMS to the phone number set in the watch, you can send settings commands, as well as check their functionality.
Via SMS messages you can check the location of the child, set SOS numbers, language settings, turn on the microphone - the so-called silent one-way call to the watch and others useful features are described below.

Be careful and careful when entering these codes.

Command Action SMS command
☀ Erase all watch settings, reset to factory settings. pw,123456,factory#
☀ Receipt technical settings hours. The most important command when setting up a children's smartwatch. pw,123456,ts#
☀ Reboot the clock. pw,123456,reset#
☀ Set mobile internet settings on your watch.
This command is necessary when changing a SIM card, for example if you change your telecom operator.		 For Beeline - pw,123456,apn,internet.beeline.ru,beeline,beeline#
For Megafon - pw,123456,apn,internet,gdata,gdata#
For MTS - pw,123456,apn,internet.mts.ru,mts,mts#
☀ Clock server.
This option is selected in the drop-down menu of the SeTracker application, but if for some reason this setting knocked down, it must be installed manually.
It depends on the correct server where the clock will be positioned, i.e. geolocation is based on this setting.		 pw,123456,ip,52.28.132.157,8001# - Europe and Africa
pw,123456,ip,54.169.10.136,8001# - Asia and Oceania
pw,123456,ip,54.153.6.9,8001# - North America
pw,123456,ip,54.207.93.14,8001# - South America
pw,123456,ip,agpse.3g-elec.com,8001# - Hong Kong
☀ The central phone number can be set with this command. Phone format via 8. pw,123456,center,number#
Remove center number: pw,123456,center,d#
☀ Ask additional number phone. Not required. Phone format via 8. pw,123456,slave,number#
Delete additional number: pw,123456,slave,d#
☀ Set the numbers SOS 1, SOS 2, SOS 3. Phone format via 8. pw,123456,sos1,number#
pw,123456,sos2,number#
pw,123456,sos3,number#
Remove SOS numbers:
pw,123456,sos1#
pw,123456,sos2#
pw,123456,sos3#
☀ Set the phone numbers to dial using buttons 1 and 2. Phone format via 8. pw,123456,tel1,number#
pw,123456,tel2,number#
Remove numbers from buttons 1 and 2:
pw,123456,tel1#
pw,123456,tel2#
☀ Setting the interval of data transfer to the server in seconds. The more often information about the location of the watch is requested, the faster the battery drains, but the more relevant the data is. In the command, 300 means the request time in seconds. pw,123456,upload,300#
☀ Call back. This function allows you to listen to what is happening around the child. By sending a phone number, you receive a call from the watch within 10 seconds, while the smart watch does not show any signs and the child does not know that he is being eavesdropped. pw,123456,monitor,number#
☀ Request to receive coordinates of the child’s location. In the response SMS you receive two coordinates, which, when clicked, can be viewed on a Google map. pw,123456,url#
☀ Set the language and time zone on the watch. Where 9 is Russian, 3 is time zone +3. Information can also be set through the SeTracker application > Settings > Language and time. pw,123456,lz,9,3#
☀ Changing the date format. pw,123456,dateformat,0#
☀ Set the time on your children's smart watch. Filling rule pw,123456,time,hour.minute.second,date,year.month.day#. pw,123456,time,Hour.Minute.Second,date,Years.Month.Day#

Date: 03/16/2017 Time: 11:29 188939

14

Children's smart watches Smart Baby Watch Q50 with GPS tracker, or, as they are also called, Wonlex Q50, are quite popular among parents. However, some users may encounter difficulties in initial setup. Our instructions in Russian will answer the most common questions: how to set up a children's smart watch with GPS Q50, how to connect it to a smartphone, how to set the time on the watch, and we will also help you prepare the gadget for use.

Before use Baby Watch, they need to be configured. Preparing for use and setting up your Q50 doesn't take much time.

In addition to the device itself, you will need:

  • Micro-SIM standard SIM card with positive balance
  • Smartphone or tablet with permanent exit in Internet

Insert the SIM card

  1. Activate the SIM card using a smartphone or regular phone
  2. Disable the PIN code request on the card and automatic download operator menu
  3. Top up your account and make sure the balance is positive
  4. Activate the Internet service on the SIM card (optional 3G, preferably unlimited 2G (GPRS/EDGE).
  5. Insert the SIM card into the slot, then turn on the watch. To install the SIM card, you will have to disassemble them, as shown in the images below.

You can then top up your account remotely via your bank's app, online payments or scratch cards.

The main thing is to save the watch number.

Purpose of the buttons

The watch looks like a thick bracelet with a display, three buttons on the right and one on the left, next to which there is a USB port for charging under the cover.

The first button is one of the main functional ones. Using it, you can make a call to the first programmed “hot” number by long pressing it. It's also a volume up key and a way to move up through the phone book.

The second button is also used for outgoing calls. Holding this button will make a call to the second programmed subscriber. A short press brings up a list of contacts and moves down through it. When your child moves through the contact list, you can call the selected number by long pressing this button.

The third button is to turn on/off and hang up the call. You also need to hold it down to record a voice message. It is worth noting that voice SMS from the parent’s smartphone is transmitted to the watch using the Internet through an application (similar to chat), and not through a mobile operator.

SOS button (left): just press it in an emergency for the watch to start communicating with the phones of those closest to you and send a signal. These numbers do not need to be selected or dialed, they are pre-set through the application.

How to make calls from Q50

Through the phone book:

  • press button number 2, we get into the phone book
  • select a subscriber by moving through the contact list using buttons No. 1 and No. 2
  • stop at the selected number
  • hold down button No. 2 - there is a call

Quick call (button No. 1 - mom, button No. 2 - dad):

  • press and hold the first or second button until the call is made

Despite the fact that the device screen is black and white, it transmits all the necessary information: time, number of steps, date, network status, battery indicator, presence of voice messages and other indications in the form of icons. To make it easier for you to understand the notation, look at the table:

How to register Smart Baby Watch in the app

To register the watch, it must be connected to the parent's smartphone via software. It is difficult to answer unequivocally which program for the Q50 watch is better: each user has his own preferences. In fact, all beacon programs work identically. We recommend free software called SeTracker 2. It has a simple registration procedure.

The official Q50 watch app is available for iPhone and Android smartphones. Through it, you can contact your child, track location using GPS, or send a voice message.

  1. Log in to the AppStore or Google Play
  2. Search for “SeTracker 2”
  3. Install official application SeTracker 2
  4. Launch the application
  5. Select your region (in our case - Europe and Africa) and language
  6. Click the “Registration” button and fill in all fields with data

  • License. Here you enter the device identification code, which is printed on a sticker affixed to the back of the watch case or to the packaging box. This combination of numbers is also called a code. Do not confuse this with the IMEI, which may also be listed on another sticker. If there is a QR code, it is better to scan it by clicking on the scan icon in the “license” field on the right side.
  • Check. Your email address for registration. This is also a login. It is also needed in case of password recovery if you forget it.
  • Nickname. Nickname or name of the device owner. It has a length of 4 to 16 characters and may include letters of the Latin alphabet.
  • Password. It can only consist of numbers and Latin letters. Its length is from 6 to 12 characters. Remember it securely or write it down.
  • Password confirmation. The Smart Baby Watch app will require you to re-entry password to ensure you remember or write it down.

After filling out the fields necessary information, specify the region Europe and Africa again.

After all these procedures, the smartphone and watch will connect automatically. If your phone does not see the clock or you encounter other difficulties, we recommend reading.

Setting up the Q50 smartwatch in the SeTracker application

The SeTracker application is the main monitoring and management tool. Through it you can ask everything necessary settings Q50.

  • SOS numbers. Here you enter the numbers of the people closest to the child (parents or other relatives). They must be written in 10-digit (national) format, without an international code. If you press on the clock SOS button, then the device will call these subscribers in turn.
  • Back call. This name hides the real wiretapping mode. When you want to hear what your child is doing, you dial from the app and the device calls back to the specified number. While wiretapping is running, the Q50 will not respond to commands. The child may regard this as a device failure. However, more advanced children can understand from the lack of reaction that they are being listened to. Therefore, use this mode with caution.
  • Operating mode. Here you can select how often GPS data is sent to your device. The more frequently you transmit GPS information, the more accurately you will know where your child is. But this feature drains the battery quickly. There are 3 options for sending GPS data: once per minute, once every ten minutes or once per hour.
  • Reports. This section will help you when a child enters a room and loses GPS signal. At this point, the watch switches to LBS mode (location based on signals from base stations), which reduces accuracy. In the “Reports” section you can see the last location recorded by GPS (usually this is the location of the entrance to the premises).
  • Setting up SMS. Enter here the phone number to which the Q50 will send SMS in case of emergency (for example, if they were removed from the wrist, a child left the safe zone, or presses the SOS button). If you did not enter your contacts in the “wiretapping” section, in this case the watch will use the number from this section to call you back.
  • Contacts. Q50 have a built-in filter type " White list": they only accept calls from certain contacts, the rest are rejected. Contact numbers who are allowed to communicate with the watch are set in this section. As usual, they must be saved in the national 10-digit format.
  • Telephone. Baby Watch can also make outgoing calls, but the phones that can be called from it are also strictly specified in the application. Subscribers are selected from the list using button 2.
  • Language and time. At this point you need to set the time, select the language and location. When the watch connects to the Internet, it itself uploads data about the exact time.

Voice messages and incentives

Through your smartphone, you can not only make or receive calls to your child's device, but also send a voice message. Own memory hours are enough to receive and store messages. The child will be able to listen to the message when he is connected, and then he will be able to record and send a response.

Another nice feature is sending rewards, or encouragement hearts. This way you can say “thank you” with one touch or simply show that you love your son or daughter. Read how to send.

Video: How to set up Q50 in Setracker app

Frequently asked questions from users

Before using a device, some parents search for information on the Internet so that they know what they will encounter when using it. We suggest that you familiarize yourself with the most common user questions.

How much internet do you need?

In order to transmit data to the application, as well as receive commands through the program, Q50 uses mobile Internet SIM cards. Based on one month, according to the manufacturer Wonlex, they need 30 MB of Internet traffic. According to user reviews, they consume a minimal amount of traffic: within 10 minutes, 2 KB per transfer + unscheduled requests - from 4 KB to 91 KB.

How quickly does the battery drain?

According to the manufacturer, the Q50 charge should last up to 4 days in standby mode and up to 6 hours in talk time. But you should take into account that if the device uses GPS to determine the location of the child, the battery life is significantly reduced, especially if the signal update mode is set to every minute. As an alternative, you can use LBS. Read what it is here.

How to reset to factory settings?

You can reset the Q50 to factory settings using an SMS command that is sent to the phone number in the watch in the form of the combination pw,123456,factory#.

How to set the time?

When you connect your watch to your smartphone using the installed software, the time should be set in them automatically via the Internet. But if this does not happen, you can also use an SMS command by sending it from your phone to the Baby Watch number. In the text of the message, enter the combination pw,123456,time,Hour.Minute.Second,date,Year.Month.Day#.

For example: pw,123456,time,18.46.59,date,2017.09.17#.

The main way to set the time on the Q50 is correct setting in Setracker in the “Language and Time” section. See details with illustrations.

How to turn on GPS on your watch?

You won't be able to turn on GPS in the Q50 because it's not provided. This built-in technology works continuously and automatically searches for a satellite when the device is outdoors. If GPS does not work, it means that Baby Watch did not pick up a satellite signal in a closed space.

How to charge?

You can charge your children's watch using a micro-USB charger, which comes with your laptop or PC. Since the battery in them is of small capacity (420 mAh), it quickly gains a charge even from not very powerful source. Do not use charging device fast charging and do not charge from the mains, so as not to overload and damage the battery.

If the watch does not charge, then you need to establish the reasons: the battery has deteriorated, the battery is wet, or the contacts are damaged. In this case, it is worth contacting for repairs. Often the reason may lie in a damaged charging cable.

Sometimes, in order to see the indicator during charging, it is necessary for the battery to gain some energy. Do not immediately unplug and reinsert the USB cable into the device. Wait a while.

How to turn off Q50?

To prevent a child from accidentally turning off the watch with the button, this function is deactivated. They can only be turned off using the on/off button if no SIM card is inserted. You can turn off the Q50 in the application through the “Remote shutdown” menu item or by sending the SMS command pw,123456,poweroff# to their number.

Problems connecting Smart Baby Watch Q50 to the Internet

It is possible that if the SIM card was purchased specifically for the Q50 and was not used in an “adult” device, you will have to set up the Internet on it. To do this, you need to send a special service SMS message to the phone number of the watch. The numbers 123456 do not replace any other combinations, but are used “as is”.

For Russia:
MTS: pw,123456,apn,internet.mts.ru,mts,mts#
BeeLine: pw,123456,apn,internet.beeline.ru,beeline,beeline#
Megaphone: pw,123456,apn,internet,gdata,gdata#
Tele2: pw,123456,apn,internet.tele2.ru#
Eta: pw,123456,apn,internet.yota#
SMARTS: pw,123456,apn,internet.smarts.ru#
BaikalWestCom: pw,123456,apn,inet.bwc.ru,bwc,bwc#
Motive: pw,123456,apn,inet.ycc.ru,motiv#

For Ukraine:
Kyivstar: pw,123456,apn,www.ab.kyivstar.net#
Life: pw,123456,apn,internet#
MTS: pw,123456,apn,internet#

After the watch receives the SMS commands and applies them, a response message should be sent to your phone. This means that the setup was successful. Now reboot (turn off and on) the Q50. Now the Internet should work correctly on them.

If the response SMS does not arrive for a long time, try sending the command again, but replace the numbers 123456 with 523681.

Problems with locating Smart Baby Watch Q50

In some cases, your Q50 will not show your GPS location correctly. Parents see on the map that their child is somewhere in China. This may mean you might have missed one. important step, like defining the time zone and language that are configured in the application.

In the SeTracker settings, select the correct time zone (for Ukraine it is GMT+2 or GMT+3, for Russia - depending on the region) and Russian language. After this, the location will be determined from using GPS correctly.

If you have any questions about setting up the Smart Baby Watch Q50 (Wonlex), ask them in the comments, we will try to answer them.

The clock was first installed on the VAZ 2103. At that time, the presence of this device on the car panel was considered a luxury for examples of the Soviet automobile industry. Today it is unlikely that such a device will surprise anyone, but it cannot be said that the VAZ 2107 watch is a useless element of the interior. Moreover, tuning enthusiasts also fell in love with them, installing other devices in their place, for example, a voltmeter, or replacing the standard clock with a more interesting option - an electronic clock with a set of additional functions.

Connecting a VAZ 2107 watch

When assembling the “beard” of a VAZ 2107, beginners often encounter the problem of connecting electrical appliances. Moreover, all of them, be it a cigarette lighter or a watch, have no secrets. There are three wires connected to an electromechanical clock: “minus”, clock power and backlight power. The minus is connected to a terminal located directly on the case; further connection of the VAZ 2107 watch can be done literally “at random”. The remaining two wires can be connected in any order. If the clock does not go, but the backlight lights up, you should simply swap the wires.

Dismantling and installation of VAZ 2107 watches

You have to take off your watch to check it, repair it, tune it, or replace it with a more advanced version of the device. Before removing the watch, you must disconnect the ground terminal from the battery. The removal procedure is slightly different on models before and after 1993. In the first case, the sequence is:

  • remove the three plates covering the instrument cluster mounting screws;
  • Unscrew the screws and lift the dashboard;
  • release the clock fastening brackets and remove them from the panel;
  • disconnect the terminals of the wires connected to the clock.

To remove the watch on a “Seven” older than 1993, you must perform the following operations:

  • unscrew the screws securing the center console and remove it;
  • unscrew a couple of screws located at the bottom of the ashtray;
  • remove the radio;
  • Unscrew a couple of screws securing the radio frame;
  • remove the decorative plate from the frame of the upper ventilation nozzles that covers the screw;
  • unscrew the screw;
  • Unscrew the 4 screws of the lining installed under the control panel for the interior ventilation and heating system;
  • dismantle the switches installed under the central heating and ventilation nozzles of the cabin;
  • unscrew the screw holding the instrument panel;
  • pull out the instrument panel, disconnect the wire terminals from the clock;
  • remove the panel along with the ventilation nozzles;
  • unscrew a couple of screws securing the clock;
  • remove the watch.

Installation of the clock is carried out in the reverse order of dismantling.

Malfunctions

The standard VAZ 2107 watch is not the most “vitally important” device, however, when it is standing, it causes certain inconvenience and can disorient you in time. Therefore, their malfunction, like any other device or car system, must be eliminated. To restore their functionality, it is necessary to determine why the clock on the VAZ 2107 does not work. In principle, there are few reasons for the malfunction:


The fuse can even be checked visually. To do this, just remove it from seat and inspect the thread. If the fuse is blown, you should replace it with another one of the same rating. However, fuses often burn for a reason, but when a short circuit occurs in the circuit. It can occur if the terminal of the positive wire has fallen off and touched a metal part of the body, or if the insulation of the power wire is damaged and “shorted” to ground. Therefore, before replacing the fuse, and especially if it is working and the clock does not work, you need to check the condition of the wire and power terminals. Therefore, the watch will have to be removed.

You can check for a short or break in the power wires by ringing them on the housing or on the terminals of the corresponding fuses.

Oxidized terminals must be cleaned, but if they are loose and do not fit well on the contacts, lightly press them with pliers. If there is damage to the wire insulation, it can be repaired by wrapping it with electrical tape.

Replacing the standard clock of a VAZ 2107 with digital ones

The standard clock is not informative enough, and it looks too standard. Therefore, many owners of the “Seven” change them to more advanced models. Usually this is an electronic watch with a voltmeter function. Such a device not only looks more modern and attractive, but also allows you to control the voltage of the on-board network. Installing an electronic clock on a VAZ 2107 is easy. On the market you can find a wide range of electronic watches for the “seven” with different display colors and functionality.

A good option is a watch with an alarm clock, calendar, voltmeter and thermometer function. The most advanced model has two temperature sensors - internal and external, which allows you to control two temperature parameters at once.

Such clocks fit perfectly into the place of the standard ones, and connecting them does not require the installation of additional power circuits. The only thing you should take care of is to install an external temperature sensor and run a wire from it to the location where the clock is installed.

If in electronic watch There is no function for measuring external temperature; their installation is completely similar to the installation of a standard clock and does not require additional actions.


2024 gtavrl.ru.