Change users name. How to change the name of the user folder

In some cases, it is necessary to change the name of the user's personal folder. For example, if the folder is named in Cyrillic, then its name will need to be changed to Latin for correct operation some games or programs. The usual way to do this will not work.

In this article, I will give step-by-step instructions on how to rename a user folder. After changing the folder name, all other programs will work properly, of course, if you do not make mistakes when executing the instructions.

Preparing for renaming

Before you rename a user folder, do two things:

• Firstly, after changing the folder name, the theme will be lost. If you need it, then keep it. This is done in the desktop properties.
• Secondly, if you do something not according to the instructions, you can damage Windows and it will not boot. Therefore, create a restore point.

How to rename a user folder

Create account, which will have administrator rights. This is done in the control panel in the account management section. Then log in with this account. Once the instruction has been completed, it can be deleted.

Go to system local disk(the one on which Windows is installed) and go to the “Users” or “Users” folder. Find the user's personal folder that needs to be renamed here and rename it in the usual way– by clicking the right mouse button.

Let's say I rename the "Victor" folder to "Viktor" as shown in the screenshot.

If you cannot change the folder name, do it in safe mode.

If a UAC security message appears when renaming, click “Yes”.

How to change registry paths

The folder name is written in Windows registry. Thus, after you have succeeded in renaming the user folder, you still need to change the paths in the registry.

To do this, press Win+R, write regedit in the window that opens and click “Ok”. You will see the Registry Editor.

Go to the folder HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList. You will see several sections whose names begin with “S-1-5...”. Open each of them and find the one where the "ProfileImagePath" parameter contains a value with the username that you are renaming.

So, I'm looking for "ProfileImagePath", the value of which is "Victor".

Double-click on this parameter and change its value by writing down a new username. But change only the part of the path that contains the old name. And click the "Ok" button.

As a result, you will see that the parameter has changed value.

How to change your account name

Remained last step In the instructions on how to rename a user folder, you need to change the account in the system.

Press Win+R, write down netplwiz in the window that opens and click OK. You will see a list of users.

If the option is not enabled, then enable “Require username and password.” Select the account whose folder you renamed and click the “Properties” button.

How to change your username in Windows and more.

In this article I will tell you how fully change the username in Windows 7. By “completely” I mean that not only will be changed visible login name, but system name + user folder.

The instructions are 100% working, since I myself use this method. note, what d It is not suitable for Windows XP, and I have not tested it on Windows 8.

This article is written solely on the basis personal experience author. You follow all the advice given here at your own peril and risk. No one is responsible for your actions.

Even if you do everything correctly and according to the instructions, some programs may stop working, for example Java. You will just need to reinstall the broken programs.

Instructions:

1. First, you need to log in under another account that has administrator rights. If it doesn't exist, create it. After completing all operations, it can be deleted.

2. Renaming an entry when logging into Windows

Let's go to Control Panel -> User Accounts and Security -> User Accounts. Select the desired entry (button Managing another account) and press Changing your account name. Enter required name and press Rename.

3. Rename an account in Windows Settings

In the Start menu on the line Computer right click and select Control.

In the window that opens, expand groups Local users and groups, then go to the folder Users. Right on the right user and press Rename.

Let's move on to the next step.

4. Renaming a user folder

Let's go to drive C, to a folder Users. You are taking the desired folder user and rename it (it will be better if this name matches the new profile name).

5. Changing the path to the user's folder

On your keyboard, press the keyboard shortcut Win+R. In the window that opens, enter regedit and click Enter. The Registry Editor will open.

Go to the following path: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList(folder ProfileList needs to be disclosed).

Here we will need folders whose names begin with S-1-5-21-. These are folders containing information about users. You can find the desired folder by key ProfileImagePath. It contains the user's folder address.

Find the address with the folder of your old profile and replace the address with the new one (if you did not move the folder, just replace the name of the old profile with the name of the new one).

After this, you can log out of your current profile and log into your updated profile. Thank you for your attention!

Do you have any questions? Do you want to add to the article? Did you notice the error? Let me know below, I'll be sure to hear from you!

If this article helped you, write about it in the comments. And don’t forget to share the article with your friends on social networks;)

P.S.

The article is a copyright, but based on materials from the site - so if you copy it, do not forget to insert an active link to the author’s site, that is, this one :)

, Share this article on in social networks- support the site!

Hello, today I will tell you how to change or rename the username on Windows 10.

There are a huge number of reasons. From ordinary antipathy to the need before selling a computer. First you need to decide which account you are interested in.

There are two: a local account and a Microsoft account.

Local account is an account used only on your PC.

Microsoft account is the notation you use in all types of operating rooms Windows systems. If you have already made up your mind and are wondering “how to rename a user in Windows 10,” let’s get started.
We'll look at local recording first. To change your username:

• Call the “Run” dialog. Press the key combination Win+R. A small window will appear in the lower left corner.
• In the window that appears, enter the command “control”

• The Control Panel will open. Find the “User Accounts” sector and go to “Change account type”, which is located below.

• Select and click on the Windows 10 administrator whose name you want to change.

• In this window, click on “Change Account”.

• Here you can change the account name. In the special field, enter the new user name and click rename.

This is how you can change your username.

Secondly, let's consider changing the account

When people ask how to change their username in Windows 10, they often mean changing their Microsoft account name. Here you will need an Internet connection.

• Go to the company's official website.
• Log in to your account in Windows 10 by entering your username and password. Then go to the “Account” tab
• Just below your photo, on the left, you will see a hyperlink “Change name”. Press.

• Enter your First and Last Name. Click "Save".

• Many people ask: “how to change an account?, how to change an account?”. In Windows 10, there is no special algorithm for renaming your personal folder. The only way do it, create new account with the desired name and transfer all files:
  Open the Start menu.
• Click on the "Options" section.

• Go to the “Accounts” category.

• Select the “Family and other users” tab (It’s on the left). And click on the “plus” in the “Other users” category.

• Click "I don't have this person's login information" below.

The operating system installed on the computer initially assumes the presence of an automatically created administrator account. However, during the installation process you are always prompted to create a new windows user 7. Why? Windows 7 is a multi-user operating system that allows multiple users to work on one computer. Each of them uses own settings. On home computers, having multiple accounts is simply necessary to differentiate access between adults and children.

What is an account?

For better understanding, a user's account can be compared to his personal room, his own space that can be hidden from strangers using a password lock. Several accounts are created on a computer on which several Windows 7 users work. Each working user can have his own theme, design, and other personal data. All accumulated information is stored in the folder corresponding to the profile and is not mixed with information from other computer users. Access to another user's documents is usually prohibited. Examples of multiple accounts: in home version– parents and children, at work – different shifts, one computer per department, etc.

In addition, different users have different rights to the computer. The administrator is allowed everything, the user of a limited account has limited opportunities in your actions.

We create new users.

Quantity created users limited only by the limits of expediency. Go to “Start”, “Control Panel”, “User Accounts”, “Create an account”.

In the window that appears, you must specify the user name and rights, and click the “Create” button.

After this, you can change the name or picture of the account, create a Windows 7 user password. The new account is ready! The next time you boot, you will be offered a choice from a list of Windows 7 users, which will include the newly created user.

User hot swap.

You can change the Windows 7 user without rebooting the operating system. Click “Start”, go to the drop-down list of the “Shut down” button.

To change the user, there are two options:

“Change user” – all open on this moment programs and windows will be saved and you will return to them when you return to your profile.

"Logout" is equivalent to reboot windows until the user selects. Be sure to save the results of your work in this case, because all running programs will close.

The nuances of deleting an account.

There are two options for deleting a user: disabling the account or deleting it. Account disabling is used to temporarily prohibit a user's access to the system. Subsequently, it can be turned on while saving all settings. Once a user is deleted, his account cannot be restored. You must remember that to remove a user from the system, you must have administrator rights.

To delete a user, follow the chain: “Start”, “Control Panel”, “User Accounts”, “Manage another account”. When you click the “Delete Account” button, the system will protect your actions by offering to save the deleted user profile on disk. You can accept or decline this offer by simply clicking “Delete Files.”

You can also manage accounts through Computer Management, or using an account manager, and even through the system registry! But the method described above is simpler and more visual.

tehno-bum.ru

User selection window and automatic login in windows 7 | Notes from an IT specialist

In some situations it becomes necessary to enable automatic login into the system, which stops working in cases where there are more than 1 users in the system or it has a password.

Introduction

The user selection screen in Windows 7 may appear in several cases:

• When logging in, if automatic login is not configured
• When the system is blocked or the user changes
• When resuming from sleep or hibernation, or exiting the screen saver

About automatic login

Automatic login without entering a password is convenient if you are the only user of the computer, or use a specific account much more often than others. When setting up automatic login, you need to understand that anyone who turns on the computer will easily log in and have access to all files and settings of the account they are using. Setting up automatic login varies depending on whether the computer is joined to a domain.

The necessary conditions

If there is only one active account on the system without a password, it automatically logs in, so additional customization not required. If you have multiple accounts, automatic login requires configuration, even if none of them have a password. Additional "service" accounts can be added to the system when installing various software.

Administrator rights are required to set up automatic login. The setup process is practically no different from setup in Windows XP or Windows Vista.

Computers not part of a domain

For computers that are not part of a domain (for example, home computers), you can configure automatic login in graphical interface operating system.

• Press the Win+R key combination.
• In the Run window that opens, enter: netplwiz (does not work in Windows XP) or control userpasswords2
• Press Enter. The User Account Settings window will open.

Note. If the account does not have a password, leave the Password field blank.

The automatic login setup is complete.

Automatic login can also be configured in system registry. All required parameters are listed in the table in the next section of the article.

Computers included in the domain

For computers that are part of a domain, you must specify the name of the default domain to which you will log on automatically. There is no such option in the operating system graphical interface, so automatic login is configured in the system registry.

• Press the key combination Win+R
• In the Run window that opens, type: regedit and press Enter. The Registry Editor will open.
• Go to section: HKEY_LOCAL_MACHINE SOFTWARE Microsoft windows NT CurrentVersion Winlogon
• Configure the registry settings according to the table. If the parameter does not exist, it must be created.

Automatic login options

Note. The first three options in the table can be used to configure automatic logon on computers that are not part of a domain.

User selection during automatic login

If you have automatic login enabled but need to log in with a different account, press and hold Shift key at starting windows. Or click Logout/Change User in the shutdown menu and hold down the Shift key.

Changing users during automatic logon can also be affected by the string parameter (REG_SZ) ForceAutoLogon in the registry key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\windows NT\CurrentVersion\Winlogon.

The parameter can take values ​​1 (enabled) and 0 (disabled). Its purpose is to ensure that the user is always logged in if automatic login is configured and the computer is turned on. In fact, enabling this setting results in the user being unable to log out - once the session ends, the user is immediately logged in automatically. This behavior is intended for computers running in kiosk mode in public place(for example, a library). The only way to bypass it is by holding down the Shift key while logging out.

Requesting a password when resuming sleep or hibernation

When your computer goes into sleep or hibernation mode after a period of inactivity, Windows 7 prompts you for a password when you resume, providing additional data protection. This request can be disabled.

Open Power Options in Control Panel, in the top left corner click Require password on wakeup

At the bottom of the Power Options window, first click Change currently unavailable settings, and then set the password requirement.

Notice the User Account Control (UAC) shield next to the link. Administrator rights are required to change these settings. However, a confirmation request will only appear if you are working with permissions regular user. Administrator rights will be elevated without prompting.

Requesting a password when exiting the screensaver

The screen saver can be used as a means of protecting data from unauthorized access if it is configured to require a password when exiting the screen saver. In Windows 7, as in previous NT systems, this setting is called Start at login screen. After a period of inactivity, the screen saver turns on and when you exit it, you will be prompted for a password if your account is protected by one.

Click right click mouse on the desktop and select Personalization from the menu. The Control Panel window will open. In the lower right corner of the window, click Screen Saver. The Options window opens screen saver. Clear the Start at login screen check box if you don't want to enter a password when you exit the screensaver.

Sources:

it-notes.ru

How to change username in windows 7?

Some time ago I talked about how to create a new user in Windows 7, and then delete it if the profile turned out to be unnecessary. Today I will talk about how to change the username in the system.

There are essentially two ways to change your name. I'll tell you about both.

The first one. Click on the “Start” button, and then click on the “Control Panel” item. In the control panel, select the “User Accounts” section.

A window will open with information about all the profiles that exist. Click "Change your account name."

Enter your new name and click on the “Rename” button. The new name is saved.

It would seem that the conversation could be closed at this point, but that was not the case. When you change your name using this method, you will only change your display name. Therefore, if you, for example, need to connect to another computer, the latter will see the same old name. Another problem arises when English-language software is installed and the system requires you to enter a name in Latin - even if you change the name using the specified method, the user will not be able to register or even launch the software. Therefore, there is a second method for changing the username, which actually changes the username.

Press the CTRL+R key combination to open the “Run” window. Add the phrase control userpasswords2 to it and click OK.

The User Accounts window will appear. In it, select the desired profile, and then click “Properties”.

In the new window, change the name in the “User” column, then click OK.

Restart your computer and log in with a new account. The method works for Windows 7, 8 and XP (it is not yet known about Windows 10).

fulltienich.com

How to change the network user name in Windows. - IT notepad

It often happens that when we connect to network resource(a folder located on a nearby computer in local network or on the server) enter your login (username) and password, and then check the “save” box so as not to repeat this procedure next time. But the username may change or you may move to another computer with someone else’s data already stored, and you need to access the network resource under your own account. What to do in this case?

operating room Windows system 8, according to the developers, is the most convenient and provides easy and fast access to all controls. However, given the significant differences between the new OS and its predecessors, you need to get used to it and study a little. For example, many people ask the question, how to change the username in Windows 8?

In fact, the G8 controls themselves are no different from the previous one. Windows versions. The only difference is how to launch them. This is exactly what this article will discuss.

How to open a service to change account settings

Launch methods of this service enough. Which one to choose depends on you and the goals you are pursuing. So, let's look at all the methods in detail.

The first way to change the account name in Windows 8 is to launch the service through the Control Panel. To do this, go to your desktop and move your mouse cursor to the right top corner. A pop-up menu will appear in which you should launch “Options”. After this you need to open "".

In the window that appears, you need to select the “Accounts and Family Safety” section, after which you just need to open “Accounts”. In the menu that opens, you will see the account that is currently in use. Click manage another account and select the one that needs to be renamed - in my case it is “Alexander”. Read how to create other accounts. As a rule, the system creates three accounts in total:

• Guest.
• User account.

The first two are systemic. They are automatically created and disabled. Of course, you can enable them, but usually this is not necessary. In this case, the first account provides full rights, no limits. In other words, you can perform any action.

You should only use it if you know your PC well. The second is a guest account, which is enabled only if the computer is used by non-regular users, for example, in offices and public purposes.

The last option is a user account, which is created when the operating system first boots. So, in the window that opens, you need to click “manage another account.” Here you should select your entry and in the window that appears, click “change name”.

As you can see, everything is extremely simple. You just need to know some rules and key combinations that can always be found on the Internet. The developers have really created a new, even more convenient operating system, which provides quick access to all management services. Moreover, Windows 8 has synchronization with shared server, so that other users can find you using the information you provided during registration.

In addition, there is another way to change the username in Windows 8.

Changing username in Windows 8: Video

Changing your account name using the Run service

First, let's start the required service. You can do this in three ways:

• Using the key combination Win+R;
• Using search;
• Through Windows Explorer 8.

So, we launch the service and write “lusrmgr.msc” in it. Press "Enter". So you start a service to manage accounts. All accounts are displayed here and you can manage them all. The same service can be opened in Explorer by right-clicking on my computer and selecting “manage”.

In the window displaying all system accounts, select the one that needs to be renamed and right-click. Next, select “rename” and enter desired name. Press “Enter” and close all windows. It is worth noting that this is the simplest and quick method How to rename a user in Windows 8.

However, you should be aware that the first method only changes the full name of the account. However, the login remains the same.

In other words, the login name remains the same as it was - only the name that is displayed on the welcome screen changes. Therefore, you need to choose one method or another depending on what goals you are pursuing. Now you know two methods on how to change your username in Windows 8.

Run Service in Windows 8: Video

Change account on the official Microsoft website

In addition to the above methods, you can change your username on the official Microsoft website (http://go.microsoft.com/fwlink/?LinkId=91489). To do this, follow the link and log into your account using your registered Email and password.

Next, on the “overview” page, you need to select “Change name” and enter the first name and last name that you want to use in the future. After that, click “save”. Close all windows and reboot the system.

A reboot is necessary because the new account name is displayed on the site immediately, but Windows 8 needs a reboot to synchronize. You will then see your new name when you log in.

These are three main methods that are available to everyone and do not require special knowledge. Which one to use is up to you.

How to change account in Windows 8: Video