Http 192.168 0.1 admin login. Damaged LAN cable or faulty router
- Setting up the start page in the browser
- Setting up tabs
- Security Settings
- Transferring settings to Google Chrome
- Setting up Express Panel
- Setting up plugins
- Setting up AdBlock
- Setting up Opera Mobile
- Installing Windows 8
- How to burn an ISO image to disk?
- How to split a hard drive into two partitions
- Cannot delete file
- How to create a disk image?
- Where is the HOSTS file located?
- How to copy from disk to disk?
Popular articles
192.168.0.1 - router configuration: automatic and manual
192.168.0.1 – the only address of the router or modem. Home router can use this IP address to configure the default gateway.
Contents of the article
Each computer and device connected to the network has its own unique address for communication: IP address (here IP is Internet Protocol). IN command line Windows, if you enter ipconfig, you will find out the grey, internal IP address.
You can change the WLAN details via 192.168.0.1 input, which is carried out through the router’s IP, allows you to change the password and (or) WLAN user name in your personal account.
After entering new data, you will need to reconnect all devices that were already associated with the WLAN. Please be aware that deviations from default settings may even reset the device when incorrect configuration won't help 192.168 0.1 come in in equipment debugging.
How to use the installer to automatically set up equipment
Default gateway for most wireless routers ADSL is ip 192.168.0.1. There are several basic IP addresses that a router can accept. These are usually called host addresses.
Using a broadband router to sharing to the Internet, you can share the PC Internet settings. 192.168 0.1 router configuration allows the user to connect correctly on all hardware, control the connection, inputs and operation of the provider.
Tune 192.168 0.1 router For sharing Internet content is similar for each device, so the following recommendations apply equally to all data transfer devices.
192.168 0.1 input to the router settings. After completing the hardware connection, you need to have a LAN port with your broadband router to connect your PC to make certain settings.
Before setting up, you must confirm that the equipment is equipped with a network TCP protocol/IP.
PC TCP/IP Parameter Configuration Settings
Click on the internet shortcut right click mouse, select " Properties" In the pop-up window - local connection, options " property" At this time, in the pop-up dialog box, double-click the TCP/IP Internet Protocol option, select the "use the following IP address" option, then the IP address can be configured.
The factory IP address of the router is usually 192.168.0.1, so during setup you need to adjust the configuration of the PC and the router in the network segment. Here we set the address for the PC, subnet mask, and default gateway.
To access your router, enter 192.168.0.1 into address bar browser. After accessing the control panel, you can configure several parameters regarding: IP Qos, DNS, proxy, local network, network management, security settings, global network, WLAN, PPPOE, MAC, WPS, DSL and DHCP client parameters.
Since this is the first configuration, by default there is no username verification required. Then select the option “ Installation Wizard" This time there will be an Internet access interface where you can select access lines according to your network - these are CABLE, MODEM ADSL and Cell Broadband.
Next you need to select network protocol for Internet data transmission: common carriers use PPPoE dial-up user management method, so here we select the first one and then click next.
After clicking, the next step will require the client to fill out a series of information about PPPoE, the ISP verification process will go through, here the telecom operators must provide information to enter the dialog box. Click " Further«.
After filling necessary information the router will allow you to select the type of IP address; most users use the IP automatically assigned by telecom operators - select the first option of this configuration.
Some routers will require 192.168 0.1 password, username and verification. D-Link products are named Admin, with a blank password by default. For all manufacturers network equipment 192.168 0.1 login password indicated in the device passport.
Personal router settings
Advanced users may have their own needs to obtain own address, they are recommended to manually configure 192.168 0.1 Personal Area , which must be drilled down to see the product description.
Install shared resource PC on the Internet 192.168 0.1 login admin so that the router can provide the PC with NAT translation function, but this time the Internet cannot be accessed as some TCP/IP parameters need to be completed to obtain the Internet.
In fact, the user can open the DHCP function of the router, so there is no need to install software on the computer that automatically receives IP and default gateway, DNS and other information.
However, since router performance has a big impact on DCHP output, it is recommended to use static method for IP address allocation to get high output.
And just like the broadband router, right-click on properties local connection on the Internet, open a dialogue 192.168 0.1 setting, select the TCP / IP option - Parameter " Internet Protocol (TCP/IP)"in the TCP/IP option, default gateway, DNS.
Several options on the local network: we use the private IP class IP address 192.168.0 .x, where X must be different here, for example 192.168.0.17; 192.168.0.55; 192.168.0.87...The XP subnet mask will be based on the automatic generation of the input IP address, so it is recommended that users do not change the manually entered address.
Here you also need to remember that in general the router is configured to 192.168.0.1, so clients cannot use this IP address, otherwise it will cause address conflicts and all computers will not be able to use the Internet.
After setting up the PC's IP address, set ip 192.168.0.1, and the PC will send a request to connect to the router on the Internet. Then the DNS server is configured: this option is different in accordance with different regions of Internet providers (there is no common number), here the network mask is entered in accordance with the provider.
Wi-Fi setup
Thanks to local setup networks via PC can be configured and changed 192.168 0.1 connection, or rather access. A login and password for the connection point are created and entered. The main address of the router does not change, but the manually configured one is entered. Specified 192.168 0.1 login for wifi allows you to attach everything mobile devices to one router for simultaneous use of the Internet and control from a PC.
Please note: incorrect changes may significantly affect the functionality of the router and prevent you from 192.168 0.1 go to the router.
TP-LINK is one of the leading manufacturers of network equipment. We will present detailed information, how to connect or reconfigure a TP-Link router. The procedure for connecting the device, settings for wired and demon wired network, password changes and firmware updates. The information obtained will allow you to configure without problems home network in TP-Link routers.
What data is needed to connect the router?
To change the parameters of the router itself, you will need two things: a browser and a password with an access login. The latest data can be found on the label attached to the device body. As a rule, the standard login and password are the English word admin.
To use the Internet you will also need authorization data, which you must obtain from your provider. However, they must be specified in the service agreement. You must enter them in the router or specialized program, if provided by the provider. Be sure to find out the connection type (PPPoE, L2TP, PPTP and others) for correct settings. When using a dynamic IP, you need to know your IP address, subnet mask and the like. If all these parameters are already in hand, you can connect to TP-Link.
How to connect a device to a network, PC or laptop
The procedure does not cause any great difficulties, and is performed for 5-10 minutes. Follow the steps in the following instructions one by one:
Models with Wi-Fi can be configured over the air. This is relevant if you are not able to connect the router to your computer via LAN. This completes the manipulation of the wires. The process then continues in the web interface.
Login to the web interface
Manipulations with the modem are performed only in the web interface. You can get into it from a computer with a network cable connected or via Wi-Fi on wireless model. Attention! You can use the interface at any time, even when the Internet is down. To log in, follow the instructions below:
Router settings
Let's move on to the most interesting part - changing the router parameters. The main window contains more than 10 different sections. Most of them are not needed by the average user. Internet activation occurs in a maximum of two sections. Next, we will tell you in detail how to configure a TP-Link router, about creating wired connection, setting up Wi-Fi, changing the login password and other useful things.
Connecting to a wired network
The router has a quick setup feature. Beginners are recommended to use this section. Click "Next" and follow the installer prompts:
When setting up other types of connections, fields for entering your login and password will appear. Here you need to enter the data provided by the provider. The user can change the settings in the “Network” section. IN selected models“TP Link” next to the choice of connection type there is a “Define” button that will help you find out your type. Based on the WAN, the corresponding characteristics are already configured. 
For example, to use PPPoE, fields for login/password and parameters specific to PPPoE already appear in the window.
Connect via wireless network
For devices with a Wi-Fi module, you will also have to configure wireless connection. This can be done with quick setup(the penultimate paragraph requires the introduction of all important parameters).
Let's figure out what Wi-Fi settings you have TP-Link router should be changed. Broadcasting should be set to “on”. The SSID or network name is what will appear on other devices when searching. Specify your region, mixed mode. Leave the channel and its width automatically. Advanced users can choose it themselves, taking into account occupied channels by neighboring routers. If you want to set a password for the access point, select the WPA2-PSK security type. Finally, all that remains is to enter the password for wireless point networks. Click the “Next” button and complete the process.
Similar settings are found in the “Wireless Mode” section. To change the SSID or channel parameters, select the “Settings” sub-item wireless mode" You can change the password in the “Wireless Security” section. When making any changes, do not forget to click the “Save” button. If the selected settings have not changed, reboot the device.
Through these menu items, routers from the manufacturer TP-Link are configured.
Changing the password for logging into the web interface
All owners are recommended to change standard password and login from the router. This is due to the fact that an attacker, if the Wi-Fi password is missing or has been hacked, will be able to enter the modem settings and “have fun”. Eliminating the problems created will not be difficult, but it is better to avoid this. The interface allows you to quickly and conveniently change input data:
If you have forgotten your login information, perform a factory reset.
Advanced Settings
The router has a mass additional functions, which expand its capabilities. Consider some of the advanced settings:
- Guest network. Allows you to configure a public guest network, limit incoming/outgoing traffic or operating time.
- Changing addressing. It allows you to set static IP addresses or use DHCP.
- Forwarding – setting up virtual addresses, web telephony, conferences and the like.
- Functions parental controls. Limiting Internet access time or specific resources.
- Manually setting a routing table (for specialists).
- Binding MAC addresses to specific IPs.
You can find out more about how to configure specific functions of your TP-Link router in the instruction manual.
VPN
This technology allows you to hide information from prying eyes. Encryption is performed, so even your provider will not be able to track your visits. However, only those models that have a pre-installed VPN server can use VPN. You can perform the setup using the following steps (for English firmware).
Rostelecom provides its subscribers with various equipment for rent, including routers. The company is not involved in the production of equipment, but in world practice a scheme is widely used in which the manufacturer supplies the provider with equipment without a logo, and the provider already applies his own. Rostelecom does the same (it cooperates with companies Huawei, zte, eltex, sagemcom, etc.), which means that clients may have different models in use. In this article we will look at universal methods gaining access to the router settings.
How to enter the router settings
So, you rented or bought a router, came home and want to set up the Internet or make some other settings (for example). To do this, you need to open the package, connect power and a cable to the router, but not the one that comes into your apartment from the entrance, but the one that will connect the router to a computer or laptop. Connect the other end of the cable to your turned on computer. For most router models, the admin panel is available at 192.168.1.1 or 192.168.0.1 . Type one of them into the address bar of your browser and press enter.
After this, a window for entering your login and password should appear in front of you.
The username and password for logging in are indicated in the operating instructions for the router, but if you could not find such information there, then try the following combinations:
- login - admin, password - empty
- login - admin, password - admin
- login - admin, password - password
- login - admin, password - 1234
If one of the combinations is correct, then a page with available router settings will open in front of you.
If these options do not work, then you need to reset the settings to factory settings. To do this, find the Reset button on the back wall and press it for a few seconds while the router is turned on.
Basic settings of the Rostelecom router
The first tab of the router settings displays summary information about the current state of the device. We don't make any settings here.
The second tab is where you configure your Internet connection. Select the interface you need (in our case PPPoE/VPN) and click on the “add connection” button.
In the window that opens, you need to select a protocol, come up with a name for the connection, enter a username and password to access the Internet ( this information must be in your contract), as well as the server address. Leave the remaining items in the "auto" state.
If you have several computers at home, then on the next tab you can assign each device its own IP address on your home network.
The next tab is responsible for Wi-Fi setup. Here you need to set the name of your network, select the encryption type and come up with a password.
The manufacturer regularly releases firmware updates that correct errors found by users and add new functionality to the device. That's why it's worth checking regularly for availability. available updates. Go to the settings tab and find the “update” item there. The version will be displayed on the screen current firmware and available for updating. All you have to do is click on the “install” button.
As you can see, with minimal knowledge you can produce self-configuration router without calling a company specialist to your home. Ask questions in the comments and we will help you, but in the meantime we recommend watching a video on this topic.
IP address, also known as html page 192.168.1.1 - this is the entrance to the router for most Asus models, Zyxel Keenetic, Netgear, Mercusys. You can also use it to go to wifi settings branded routers or modems from providers such as Rostelecom or Beeline. For many TP-Link models, your personal account is located at. To open the https 192.168.1.1 source and log into the router panel via the web interface, you need to know the login and password, which usually look like admin-admin.
Personal account address - 192.168.l.l, 192.168.l.0 or www 192.168.1.1 net ru?
But before you go into your personal settings wifi cabinet router, we will immediately eliminate the most common mistakes that users make.
- The main thing when entering an address is not to automatically confuse and write 192.168.l.l(or 192.168.l.l0, 192.168.l.3) due to the similarity of the spelling of the letter L with the number 1 - a very common inaccuracy.
- Another one common mistake, when commas are used instead of periods in the address - 192,168,1,1
- The same applies to the computer's IP address if you enter it manually. You need to specify not 192.168.L.0, but 192.168.1.0
- Finally, someone adds the ending NET, RU or COM. Another spelling option is with HTML, 192.168.1.1.html. You don't need to do this either.
- Just as you should not write it with the prefix “www”.
Entering the settings of a new wifi router
But this is not enough. After all, even if you entered the correct IP address, you may not find the entrance to your router. Therefore, you need to ask yourself and answer the question:
Is the router you need to log into your personal account via the web interface completely new or already used?
This is necessary to understand whether changes have been made to the standard IP 192.168.1.1 to enter your personal account settings. Otherwise, it may look like 192.168.1.4, 192.168.1.77, or any other. By the way, the same applies to the login-password pair, which usually looks like “admin-admin”. It could have been replaced with a more reliable one previous owner.
Web interface of the router’s personal account - http://192.168.1.1
To find out exactly what your router's default web interface address is, look at the sticker located on the bottom of its case. In this source small print its IP will be indicated. In essence, he is html page, on which it is located Login to your router personal account. For manufacturers such as Asus, Netgear, Zyxel, Rostelecom, it will look like “ http://192.168.1.1". There are other options, for example, logging into your Huawei personal account, and Xiaomi. However, they are rare and we talk about them directly in reviews specific devices.
In some models, instead of an IP address, a certain domain can also be specified for access to the web interface of the administrator section. It already replaces this IP address at the router software level. “Scientifically” it is called a hostname. So, for example, Zyxel Keenetic routers can be accessed either by address 192.168.1.1 or “ “. U Asus— . And NetGear has routerlogin.net.
If you know the login and password for your personal account (admin-admin or another), you type the router IP correctly, but the login page to the web interface of the settings panel does not open, then check the network connection configuration on your computer.
Setting up a computer to log into the router at 192.168.1.1
In order to be guaranteed to enter the router settings, you need to make changes to the router in accordance with it. network configurations computer. Otherwise, logging into your personal account will not be possible.
To get into these configurations, we follow the chain:
- “Start - Control Panel - Network and Internet - Network and Sharing Center shared access" for Windows 7. Or right-click on "Start" and then " Network connections- Network Control Center" if you have Windows 10
- Next, in the left menu, select “Change adapter settings.”
- Find the active “Local Area Connection”, right-click on it and select “Properties”
- Select “Internet Protocol Version 4”
- Check the box automatic receipt ip and dns - in this case, the router will assign them to the computer independently.
After all this, save with the “OK” button.
Admin login 192.168.1.1 is not available
There is a problem that the web interface of the router’s personal account is also not accessible via the hostname mentioned above, but only via the IP address. This happens if the network connection settings on the computer are manually specified third party DNS servers. You need to erase them, or specify the IP address of the router itself - 192-168-1-1.
Login to router 192.168.1.1 via cable
Next, connect the router to the computer. A few years ago this could only be done via wire. To do this, let's insert network cable Ethernet (aka patchcord, twisted pair) one end into the network connector on the PC case, the other - into any LAN port of the router.
Do not confuse the LAN and WAN ports - LAN is used to connect devices, including a computer, to the router. In the WAN we only insert the cable from the Internet provider. They are usually colored different colors.
Go to the administrator settings of the router via wifi
Today, everything is distributed to the router immediately after switching on wireless signal. You can connect to it and go to settings as with desktop computer, and a laptop. Sometimes it is not protected, as is done with TP-LINK. In some cases, the network is password protected. In any case, all data is indicated on the label.
How to log into the router 192.168.1.1 - login and password admin-admin
If the router is new, then there is nothing easier than finding out the login and password. We take the device, turn it upside down again and see that same sticker. On it, in addition to the IP address and network name that we have already looked for, in small print there are details for logging into the web interface, set by default - Login / Password. In most cases this admin/admin.
We are trying to use this data to log into the router’s personal account.
If the login-password pair “admin-admin” indicated on the case for authorization is not suitable, then look for the “Reset” reset button on the case. It is usually small and recessed inward to avoid accidental pressing. Perhaps someone in the store has already tested the router and set their own own password to log into the web interface at http://192.168.1.1.
Be careful - before resetting, make sure that you have written down all the data for connecting to your provider somewhere
Plug the router's power adapter cord into a power outlet. Take something like a pin (a pen or pencil may not fit into the hole). Press the sharp end on this button and hold for 10-15 seconds.
Sometimes it happens that the reset button is combined with WPS and is not recessed. Then just press it and hold it for the same 10-15 seconds until the lights blink.
After this, the router will reboot and return all parameters to default values. All we have to do is use the same login and password from the sticker to log in to the admin web interface.
In case if this router has already been used, it is also possible through “Reset”. But as you understand, at the same time all the network configurations and Internet connections previously entered into it are lost. There are times when you want to save them, but don’t remember the password to access them. In this case, I strongly recommend reading the article about it - I hope you will find a suitable method there.
Table of entry addresses for different router models
In conclusion, here is a list popular models routers, their authorization addresses in your personal account and login with password
| Firm | Personal account login address | Login: Password | |
| Asus | http://192.168.1.1 | admin/admin | |
| D-Link | http://192.168.0.1 | admin/admin | |
| Edimax | http://192.168.2.1 or http://edimax.setup | admin/1234 | |
| Mercusys | http://192.168.1.1 or http://mwlogin.net | Set at first login | |
| Netgear | http://192.168.0.1 | admin/password | |
| Netis | http://192.168.1.1 or http://netis.cc | Installed upon connection | |
| Tenda | http://192.168.0.1 or http://tendawifi.net | admin/admin | |
| TP-Link | http://192.168.0.1, http://192.168.1.1 or http://tplinklogin.net, http://tplinkwifi.net | admin/admin | |
| Xiaomi | http://192.168.31.1 or http://miwifi.com | assigned upon first connection | |
| Upvel | http://192.168.10.1 | admin/admin | |
| Zyxel | http://192.168.1.1 or http://my.keenetic.net | admin/admin |
You try to go to the setup menu of a router, modem or optical ONT terminal via http://192.168.1.1 and the “personal account” of the device does not open for you. What to do? Call a specialist and pay money? Take your time and don't get discouraged. Let's try to figure out the problem together and decide how to log into the router?!
I think it's useful to know a little theory first:
192.168.1.1
- this is the IP address (IP) network device. By default, the network is usually registered on routers: 192.168.1.0/24. In other words the local network The first (lowest) address in the subnet is configured on the router - 1, and clients connected via the local network will use addresses with 2
By 254
. In general, this is a generally accepted rule and is configured this way for the vast majority of network devices - Zyxel Keenetic, Lincsys, Cisco, TP-Link, Upvel, Sagemcom, Asus. There are, of course, exceptions. For example, at D-Link routers and Netgear uses a different subnet by default - 192.168.0.0/24
and accordingly the IP will be - . But, whatever one may say, the numbers are different, but the meaning is the same - that IP 192.168.1.1, that 192.168.0.1 is the address of a network device on the network. In our case -
How to log into the router
Now let's move on to practice. To go into the settings of a WiFi router or ADSL modem, you must enter the address in the browser: http://192.168.1.1. In this case, you do not need to type the protocol at the beginning - http:// or www - the browser itself will automatically enter the required one.
If you have access to the settings, you will see an authorization form on the device, where you will need to enter your login and password (usually to log into the router via 192.168.1.1 you use: admin / admin):
This means that the local network is configured, the router is accessible and there are no problems with accessing its settings. We will consider the worst case scenario - the browser displays the error “Page is unavailable” or “Unable to access the site”:
Web interface accessibility issues can vary. Let's look at the most common of them:
Instructions on how to log in to 192.168.1.1.
Step 1. Check the activity of the network connection.
Very often, the reason for the router’s inaccessibility is the network cable disconnected from it.
In this case, it is not necessary that someone pulled out the cable intentionally - the connector can simply move away from the connector network card per millimeter and nothing will work anymore. Be sure to check the integrity of the cable - it may be pinched somewhere or damaged by something. Please also note that the LAN cable must be connected to the LAN port of the device and not to the WAN port.
Otherwise, you will not be able to access 192.168.1.1 through the WAN port. This port is used to connect the provider cable. But only!
Step 2: Check the network indicators.
Here I mean indicators physical connection both on the computer’s network card and on the router itself. What are they? Typically this is a green LED. If the network is active, the indicator lights up or blinks quickly. We take your device in our hands and look at the front panel. When turned on, the Power indicator must be lit - it means that the device is turned on. Then we look at the LAN port indicators - they are usually marked either simply with numbers - 1, 2, 3, 4.
When plugging the patch cord into the LAN port— the indicator with the corresponding port number should light up. If it does not light up, try disconnecting the network patch cord and plugging it into the adjacent connector. If the indicator does not light up there either, try everything one by one. Did not help? Then you have The router is faulty - take it to service.
Step 3: Check your network settings.
At this stage we need to check the settings network adapter- what IP is registered. To get into the network card settings on operating system Windows XP, click the Start button and select the Network Connections section. In Windows 7 and Windows 8, press the key combination Win+R. The Launch Program window will open. Here you need to type the phrase - control panel.
The Panel will open Windows management, where you need to find the “Network and Internet” section.
Click on it with the left mouse button. The following window will open:
Now, to open the router’s personal account via 192.168.1.1, click on the “Network and Sharing Center” link:
Select the menu item “ Properties" . The Local Area Connections properties window will open:
Select “Internet Protocol Version 4 (TCP/IPv4)” and double-click on it with the left mouse button. In most cases, IP settings are set to automatic mode:
This is how the system was initially configured. This is done in order to facilitate the connection of the computer to the network. Thanks to this, if there is a DHCP server on the network, Windows will receive an IP address, mask, gateway address and DNS from it.
But what if there is no DHCP server on the network, or it is disabled in the configuration? In this case, login via 192.168.1.1 to your personal account on automatic settings will be unavailable, since the IP will be picked up from a special Microsoft subnet - 169.x.x.x. It goes without saying that with such an address you will not have access to the WiFi router address. Therefore, to enter its configurator, you need to register the IP manually - check the “Use the following IP address” checkbox and enter the addresses as in the picture:
That is, the following should be written:
IP address - 192.168.1.2
Mask - 255.255.255.0
Gateway - 192.168.1.1
Preferred DNS server — 192.168.1.1
Alternative DNS server - 8.8.8.8
Registered, click the “OK” button for the changes to take effect. We launch the browser again and try to go into the router settings at 192.168.1.1. The router’s personal account is still inaccessible?! Well, let's move on.
Step 4. Check the Web browser.
In the Control Panel, select the “Network and Internet” section :
Now you need to select “Internet Options” and open the “Connections” tab. Click the “Network Settings” button:
No Proxy servers should be registered.
Keep in mind that a web browser is also a program and may not work entirely correctly. Therefore, be sure to install another browser - Firefox, Opera or Chrome - and try to log into the router via 192.168.1.1 (Zyxel Keenetic, TP-Link, ASUS, etc.).
Step 5. The node can be blocked by the Security System.
It may happen that your modem or router becomes unavailable locally due to incorrect setting Windows Firewall or another firewall you have installed. To eliminate this we do this:
We completely disable (by stopping the service) the security system you have installed - antivirus, firewall, etc.
Also, to exclude all options, we try to disable standard firewall Windows. It can also block IP 192.168.1.1 or an entire subnet. Go to the Control Panel, select the “Windows Firewall” section and completely deactivate the packet filter by clicking on the “Turn off” value.
On Windows 7 and Windows 10 Toolbars We look for the “Security System” -> “Windows Firewall” section and select the “Turn Windows Firewall on or off” menu item.
We disable it completely for private and public networks.
Again we check access via 192.168.1.1 to the personal account of the modem or router.
If none of the above helped you, then only the following scenarios remain:
1 option- The IP address on the router has been changed. That is, it is not 192.168.1.1 that is used, but another IP - 192.168.0.1, 10.90.90.90, etc. In this case, all that remains is to reset the device configuration parameters using the “Reset” button on the back panel of the device and configure it again.
Option 2- viruses and malware. Nowadays there are a lot of different infections circulating on the Internet, including viruses for routers that change some of their settings, after which logging into the device’s web interface also becomes quite problematic. Start by checking your computer or laptop for viruses.
Option 3— check if you can access 192.168.1.1 from a phone or tablet by connecting to a WiFi network. The password for connecting to a wireless network is often written on a sticker glued to the bottom of the device. If not, then, as an option, you can try using the WPS function. In this case, the PIN code will also be written on the sticker.
Option 4- Hardware failure of your modem or router. In this case the only way out- take it to the service center.
Video tutorial:
The router address 192.168.1.1 is available, but does not allow admin/admin
I think that to complete the picture, we need to consider another option: the router is accessible, but it is not possible to log in to http://192.168.1.1 - the password is not suitable - admin:
In this case, only 2 options are possible:
1 - Reset the settings with the “Reset” button, as described above, after which access to the modem settings should be possible without problems. But please note that after resetting the settings, the router will be pristine and will have to be completely configured from scratch.
2 - Look for the person who originally set up your device and ask for the password. If this was done by a master installer from the provider, then perhaps he installs the same thing on all devices. If the parameter settings were made by someone else, then he is unlikely to remember and will still have to use “Reset”.
The most popular devices using the address 192.168.1.1:
Zyxel equipment.
ADSL modems:
OMNI ADSL LAN EE, OMNI ADSL LAN EE, OMNI ADSL WLAN EE, P-660H EE, P-660HT EE, P-660HTW EE, P-660HW EE, P-660R EE, P-660RT EE, P-660RU EE, P-662H EE, P-662HW EE, P-741, P-791R v2, P-792H EE, P-792H v2, P-793H, P-793H v2, P-794M, P-841, P-844 EE , P-870H-51A V2, P-870HW-51, P-870HW-51A V2,
P-870MH-C1, P-871 EE, P-871M, P-872H, P-872HA, P660HN EE, P660HN LITE EE, P660HT2 EE, P660HT3 EE, P660HTN EE, P660HT2 EE, P660RT2 EE, P660RT3 EE, P660RT3 EE, P660RT3 EE, P660RT3 EE, P660RT3 EE, P660RT3E. P660ru2 ee , P660RU3EE
WiFi routers:
BG318S EE, NBG334W EE, NBG460N EE, P-330W EE, P-334 EE.Keenetic, Keenetic 4G, Keenetic 4G II, Keenetic Giga, Keenetic Giga II, Keenetic II, Keenetic Lite, Keenetic Lite II, Keenetic Omni, Keenetic Start, Keenetic Ultra.Keenetic 4G II, Keenetic Giga II, Keenetic II, Keenetic Lite II, Keenetic Omni, Keenetic Start, Keenetic Viva, Keenetic Extra,Keenetic Extra 2, Keenetic DSL.
(Second generation kineticists have the hostname my.keenetic.net)
D-Link equipment:
DSL-2640U B1A T3A, DSL-2640U BRU C, DSL-2640U BRU C2, DSL-2640U BRU CB, DSL-2640U BRU D, DSL-2640U RA U1A, DSL-2740U BRU C2, DSL-2750U B1A T2A
Tp-Link equipment
The configuration interface for devices from this manufacturer looks like this:
ADSL modems:
TD-W8901N, TD-W8950ND, TD-W8951NB, TD-W8951ND, TD-W8960N, TD-W8961NB, TD-W8961ND, TD-W8968, TD-W8970
Wi-Fi routers:
TL-WA701ND, TL-WA730RE, TL-WA750RE, TL-WN7200ND, TL-WN721N, TL-WN721NC, TL-WN722N, TL-WN722NC, TL-WN723N, TL-WN725N, TL-WN727N, TL-WN751N, TL- WN751ND, TL-WN781ND, TL-WR702N, TL-WR720N, TL-WR740N, TL-WR741ND, TL-WR743ND, TL-WA830RE, TL-WA850RE, TL-WA901ND, TL-WN8200ND, TL-WN821N, TL-WN821NC, TL-WN822N, TL-WN823N, TL-WN851ND, TL-WN881ND, TL-WN951N, TL-WR1042ND, TL-WR1043ND, TL-WR841HP, TL-WR841N, TL-WR841ND, TL-WR842ND, TL-WR940N, TL- WR941ND, TL-WA5210G, TL-WA7510N, TL-WR743ND, TL-WR843ND, TL-WA5210G, TL-WN310G, Acher C2, Acher C7, Acher C9, Acher C20, Acher C50.
Domain names are also used: tplinklogin.net, tplinkwifi.net, tplinkmodem.net.
Asus equipment
Web interface of older routers:
The same is true for new versions of Asus routers with ASUSWRT firmware:
ADSL modems:
DSL-N13, DSL-N11, DSL-N10, DSL-N12U, DSL-X11, DSL-N55U, DSL-N10 B1, DSL-N12E, DSL-N10E, DSL-N12U B1, RT-N10P, RT-AC68U, WL-330gE, WL-330N3G, WL-330N, WL-330NUL
Wireless routers:
WL-520gU, WL-520gC, WL-500gP, V2RT-N15, RT-N11, RT-N13, RT-N16, RT-N13U, RT-N10, RT-N12, RT-N10 B1 (RT-N10+ B1) , RT-N56U, RT-G32 v.B1, RT-N66U, RT-N10U, RT-N13U B1, RT-N53, RT-N12LX, RT-N10LX, RT-N15U, RT-N12, C1RT-N10, RT -N65U, RT-N10E, RT-N12E, RT-AC66U, RT-AC56U, RT-N12HP, RT-N12 D1, RT-N10E B1, RT-N10+ D1, RT-N14U
Used Domain name- router.asus.com.
Netgear equipment
The interface of devices from this manufacturer looks like this:
ADSL modems:
D6300, D6200, DGND3700, DGND3300v2, JDGN1000
Netgear routers:
R6300, 6200, WNDR4700, WNDR4500, WNDR4500, WNDR4300, WNDR4000, WNDR3800, WNDRMACv2, WNR3500L, WNR3500Lv2, JNR321, WNR2200, JWNR2000, JWNR2000v2, WNR1000 v2, JNR1010, WNR612v3, WNR612v2.