Where they put film on the phone. How to stick a protective film on your phone: step-by-step plan

For most smartphone owners in modern world The problem is the correct gluing protective film on the device screen. Most often, consumers face three main difficulties: dust, air bubbles and evenness of application. First things first.

In many ways main problem are annoying air bubbles that, one way or another, appear between the film and the screen of the device. It's easy to avoid this. First, you need to prepare the device screen. You need to wipe it with a damp cloth and then rub it with a dry soft cloth. Place the film against the display without removing the protective covering.

Glue a small piece of tape to the top edge; it will act as a handle. Remove very carefully protective covering and bend the film in an arc, leaning one edge against the edge of the smartphone screen, and roll the film onto the screen.

Use a bank card to smooth the film

For a smoother display finish, use a business card or bank card. Lead her along protective film along the device screen while rolling the protective film. This will prevent air bubbles from escaping into unironed areas of the protective film.

The next problem when installing a protective film is dust getting on the display. Here you need to try a little. First of all, you need to provide side lighting; it will allow you to see flying dust particles. Install a lamp or any other bright light source so that the light falls perpendicular to your device.

Don't let dust get under the film

Before starting the process of gluing the protective film, it is important to choose a room without upholstered furniture, clothes and rags. It is textiles that generate the most dust. The best place for this is the bathroom. Arm yourself with a spray bottle and spray the air in the room with water. Drops of water will absorb dust particles and fall to the floor. But it is better not to create unnecessary movement near the floor, as the moisture will quickly evaporate and dust will rise into the air again.

If you didn’t manage to get rid of air bubbles the first time, then simply glue two pieces of tape to the top or bottom edge of the film. Next, place them behind your smartphone and carefully peel off the protective film. This will allow you to fix the film in exactly the position you need.

You can get rid of dust that gets on the screen using ordinary adhesive tape. You can remove annoying bubbles with the edge of a bank or any other plastic card.

Do not wipe the screen with alcohol

There are versions on the Internet that it is more practical to glue the protective film onto a damp or even alcohol-treated screen. It is a myth!

Alcohol can get under the screen and leave streaks on it that simply wiping will not get rid of. And it’s not worth talking about ordinary water. The slightest contact with moisture on the microcircuits can lead to corrosion and a significant reduction in the life of your device. So you should not use such methods.

How to stick the film evenly

AND last question– how to stick the protective film evenly? It's simple! Without removing the protective covering, lean the film against the screen (protective covering down) and adjust the position you need. Then fix the film with your finger and glue two pieces of tape to the top or bottom edge of it and slide them behind the screen. The tape will serve as something like door hinges.

Then remove the protective coating and carefully apply the film to the screen using the methods described above to get rid of dust and air bubbles. If you do everything correctly, you will eventually be able to apply the protective film evenly and without irritating factors such as air and dust. All this will take no more than 15 minutes.

As a rule, people take care of the body of their phone, but for some reason they forget about protecting the screen. For this purpose, not only cases with a front cover have been invented, but also ordinary films that are glued to the screen and perfectly protect it from scratches. It would seem that this is such a simple accessory, but you need to work hard to glue it correctly and accurately. Today we will tell you about this in detail.

So, first of all, take the phone in your hand and thoroughly wipe the smartphone screen so that there are no dust particles, fingerprints, crumbs, etc. left on it. Particular attention should be paid to the presence of dust, because it is the main obstacle to successful gluing of the film. To achieve complete dust removal, you should wipe the screen with a lint-free cloth. Sometimes you can use a little water and a special cleaner, but keep in mind that household cleaners should never be used on screens. It is also undesirable to use alcohol-based products or alcohol itself. Wipes that are designed for cleaning LCD monitors are ideal.

Once the screen has been properly treated, remove the film from its packaging. There should be a paper petal on one of the edges of the film. Then place the film on a table or any hard surface and press firmly on the petal. This will allow you to separate the thin protective film from the shipping film. At the same time, remember not to touch the inside of the film. And you shouldn’t peel off all the film from the shipping film at once. It is best to peel back the shipping film a little along its entire length, and then apply the protective film to the smartphone display. All that remains is to press your fingers over the entire surface of the film so that it sticks more tightly to the screen of your phone. If you don't succeed the first time, you can do the operation from the very beginning.

Bubbles often appear when gluing the film. To get rid of them, just swipe your credit card up and down the film several times and the bubbles will go away immediately. If this doesn't help you, then your film is of low quality. And not only will it not be able to protect the smartphone screen as much as possible, such an accessory will not last long.

But that is not all. We have some tips for you:

• 1. Never glue the film close to the edges of the screen. It is desirable that there be a few millimeters from the edge of the screen to the edge of the film. This is especially true for smartphones with VGA displays.
• 2. If you glue the film unsuccessfully, you can peel it off and wash it under running water. However, such manipulations can be done infrequently and only with films of good quality.
• 3. During the operation of the film, it requires certain care. Just because you pasted the film doesn’t mean you don’t have to take care of it later. It is better to wipe everything with a damp cloth.
• 4. With proper care, the film can serve you for a long time at least, year.
• 5. There are times when it is not possible to completely clear the screen of dust particles. And this becomes noticeable when the film is already pasted. If there is little dust, then you should not peel off the film, because the second time it may stick even worse.
• 6. Ideally, apply the film immediately after purchasing the smartphone. Firstly, it is initially protected by a technological film, under which it is clean and there is not a single speck of dust. Secondly, if you peel off the factory film and immediately stick the one you bought, you will not have bubbles.
• 7. If you can’t wipe the screen with a paper napkin and dust particles still remain, then use paper tape.
• 8. You can also stick the film in the bathroom, it is best if there is a lot of steam there. When you start wiping the screen of dust, it will settle along with the steam, and you can easily stick the film.
• 9. Well, and last method In terms of successfully gluing the film, it is effective, but not safe. You hold the film under running water and shake it off so that the water droplets disappear. Naturally, they will not shake off completely, so glue the film along with them. Then you need to take credit card and move it along the surface of the film from the center to the edge to expel the remaining air bubbles and remaining water. Just make sure that no water gets on the display. If this does happen, dry it with a hairdryer.

Is it possible to stick a protective film on a smartphone yourself without bubbles? Will this method provide effective protection from damage to the touchscreen? Which film will be relevant to choose in each specific case? You can easily get answers to all these questions, as well as many others, by reading the article.

Please note that the article is not mandatory, but only advisory. The selected film for the screen, as well as the sticker method and all actions are performed by each owner after making an independent decision. We only recommend using protective equipment that will increase the time and comfort of operation.

Each reader can also leave their comments and describe their experience of using various types protection and its effectiveness. We will be grateful if you indicate not only the model of the gadget on which you tested the protective film, but also the name of the specific product. In turn, we will try to answer all questions that arise in the article, including full instructions on how to apply film to a smartphone at home and choose an alternative to the necessary tools.

Visually, the film is a thin strip of plastic that matches the size of the smartphone and is equipped with cutouts for function keys and a microphone with speaker. The exception is universal film, which will need to be cut to fit the device, as well as holes made. Small thickness is compensated high density, which provides protective functions.

Any film on the screen allows you to avoid problems with the violation of the aesthetics and functionality of the touchscreen during daily use or in certain situations. For example, applying a film to your phone before going to the beach is an ideal solution to prevent sand scratches.

Carrying your phone with various small objects - keys, coins, etc. will be safer with the protection attached. Respectively, main function film on the phone will reduce the likelihood of scratches and chips on the display.

Remember that thin films on a smartphone will not protect the display from shocks and strong mechanical damage. The exception is glass film or protective glass that can provide this protection within certain limits.

Types and features

Before sticking the film on the screen, you should study the range of similar protective equipment and choose the optimal product. Each manufacturer provides the film with certain properties and characteristics that will be relevant under specific operating conditions. It is important to study all types of products, as well as their properties in advance, choosing the best option.

Types of films

Depending on the type of surface, the film for the phone is available in different trademarks in three versions:

1. Mirror. This protection option will be of interest to women, allowing not only to increase the security of the touchscreen, but also to turn the smartphone into a kind of mirror. Please take into account in advance a slight decrease in brightness, as well as possible distortions in the transmission of colors that are typical similar products. Choosing the option with mirror image, it should also be remembered that even small scratches on such a surface are visible very well.
2. Glossy. One of the most common types of film involves transfer high-quality image, all shades of color and provides high tactile sensitivity of the display. Negative side Such protection will be its softness - with such screen protection you will have to carry out the replacement procedure quite often. Even when worn with keys, after a few days you will notice that the film is covered with a network of small scratches.
3. Matte. Excluding glass this option will be most effective in terms of ensuring safety, as well as maintaining the aesthetics of the device. If you were able to stick the protective film correctly, it will last long time without causing any complaints. The downside will be a decrease in screen brightness and distortion of information on the display.

Features of use

The operation of gadgets with protective films installed will not differ from devices without protection. Quick response to touch, ease of learning information, communication in in social networks- all this will remain with you. The film is made of plastic with a thickness of a fraction of a millimeter, and also fits so tightly to the screen that it is not felt. The main thing is to stick it on the phone without bubbles or debris between the display and the protection.

Some types of protection can be periodically removed, washed and put back on. This procedure is easy to perform yourself, and using high-quality film is a pleasure. However, you can glue the film and periodically wash off dust, dirt and debris from it, even from a not too expensive brand or cut it yourself. However, after some time, it will no longer stick to the display and you will need to purchase new protection.

Tools for work

Service centers carry out the procedure of gluing the film on the phone quickly and efficiently, using special tools. However, any owner can protect the phone display themselves by doing the work at home. And that's all necessary tools can be replaced with improvised means and familiar objects.

In order to stick the film on your phone at home you will need:

1. Napkins. You need two wipes - for cleaning the display and degreasing, as well as for wiping after cleaning. You should choose napkins that do not leave marks, lint and absorb moisture well. As a rule, napkins are included in the package quality models films.
2. Cardboard or plastic spatula. If the kit does not provide such a tool, you can use a thick business card or plastic card.
3. Scotch. This item may not be needed if all necessary actions on preparing the room and the place where the sticker will be applied.
4. Scissors. If you are using a universal protective film for your phone, you will need scissors to cut it according to the template. Measure each side carefully or pre-cut a template from cardboard to achieve maximum identity.

Prepare the necessary tools in advance to right moment they could be used. Any method of gluing a protective film to a phone screen requires high speed work to reduce the likelihood of dust and debris particles getting onto the cleaned display.

How to stick a protective film on your phone: step-by-step plan

Before gluing the film to your phone at home, you need to not only prepare all the necessary tools or replacement items, but also carefully study the instructions. We offer two options step by step instructions, including a video that clearly demonstrates the most common method of installing protection. Leave the page open until the last step of the work is completed, and then leave a comment about how you managed to stick the film correctly without bubbles or streaks between the protection and the touchscreen.

Preparing the premises

Professionals suggest that before sticking the film onto the phone with your own hands, thoroughly remove the dust in the room. Carry out a wet cleaning and prepare a level and well-lit place in which you will perform the sticker procedure. You can even choose a bathroom where it will be easiest to stick a bubble-free film on your iPhone due to the high humidity.

Preparing tools

You can add a can of compressed air to the already specified set of tools. Using such a can, you can ensure the main condition - the absence of dust particles and debris immediately before leveling the film on the display. Remember that all tools should be at hand, but not interfere with work.

Surface degreasing

To degrease the surface, use a special cloth from the kit. If there is no such impregnated napkin, take an alcohol solution, cologne, vodka or even pure alcohol. After degreasing, immediately wipe the screen with a dry, lint-free cloth. It is necessary that not a single speck of dust gets onto the display in the interval between cleaning it and gluing it.

Pasting the film

In order to glue even universal film evenly and correctly, you should perform the procedure in stages. Attach the edge with the sticker to one side of the smartphone, level the surface with a plastic card and only then remove the next layer of protection. High speed does not cancel the fact that this operation should be carried out carefully, avoiding the formation of bubbles. The procedure will be considered complete when the film is completely glued to the display and all functional holes match.

Removing dust particles and other defects

Even if bubbles appear during the sticker process, do not worry, they can be removed after the film and display are completely aligned. Remove bubbles starting from the middle of the screen, moving them to the edges of the smartphone.

Do not press too hard on the display - adhesive films do not require much force to adhere. If the bubble does not want to roll, the reason for its appearance is lint, hair or dust. In this case, you need to lift the edge of the film and use a strip of adhesive tape or tape to clean it. Do not puncture the bubbles - this will not help solve the problem, but will easily ruin the protection.

You can avoid bubbles by using the wet sticker method. In this case, a film cut out or having the exact dimensions of the gadget is moistened with water, shaken and quickly pasted onto the display. If you decide to make protection for your phone exactly to the size of the device, do not cut it on the gadget, but draw it this procedure in advance. Remember, if you didn’t succeed in sticking the protection the first time, you can always rinse it under water and repeat the procedure.

Finally

Choose protection that will not need to be changed too often due to the poor quality of the product. Read the instructions carefully and feel free to apply film for which you do not need special means or professional tools. Share your experience in the comments and help protect the smartphones of other users of our portal.

Smartphone and tablet screens need protection, even if you have a Motorola Defy with glass Gorilla Glass. Any screen becomes covered over time small scratches and scuffs. Therefore, I strongly recommend gluing a protective film on the screen, because the cost of a protective film is disproportionately less than the cost of replacing glass. Although, of course, the owners of Motorola Defy are luckier; their screens can withstand much greater abuse from their owners.

The Internet is replete with recommendations on how to properly apply protective film. As a rule, photographs of the process of correctly gluing the protective film are provided. AND the necessary conditions for this. Such as clean hands, phone body, glass, lack of dust in the room where the protective film is glued to the phone screen.
And I found a really cool video instruction on YouTube on how to stick a film on a smartphone. After viewing which all questions will disappear by themselves.

The entire procedure took the author of the video three and a half minutes. And the music didn’t disappoint.
If the video from YouTube does not work, then you can download it using a direct link: Video instructions How to stick a protective film on the screen of a Samsung Galaxy smartphone

What you need to successfully apply a screen protector to your phone

A room with little dust, such as a bathroom. Before locking yourself in the bathroom, paranoids and maniacs need to turn on the water and wait until the dust settles (humidity increases, and accordingly dust particles settle).
They will also come in handy credit card, wet lint-free wipes and dry lint-free cloth (fans of the domestic manufacturer recommend a terry towel).

Wipe the surface of the phone with wet wipes (stains from the wet wipe may remain, the main thing is that there are no stains). Next, we take a terry towel. But I always use the fabric that comes with the protective film.
Do not blow, breathe, or spit on the screen under any circumstances. Only wet wipes and lint-free cloth (terry towel).
Do not use any cleaning agents or alcohol-containing substances.
After cleaning the screen, we take the protective film and begin the sticker process.
The protective film consists of three layers. Actually from the protective film itself for the screen and the “shirt”, one additional layer on each side.
As a rule, stickers from two different sides. One of them marks the side facing the smartphone screen (can be called Step1 and has a blue color), the second indicates the outer side of the protective film (can be called Step2 and has a different color from the first side).
We apply the film in place and fix it with tape on one side, preferably a long one, so that the film has no chance of moving during the sticking process. We get something like a door. “Open” and “close” several times, making sure that the film fits correctly on the screen.
Wipe the phone screen again with a dry, lint-free cloth (terry towel).
“Open the door” and pull the blue sticker Step1 - peel off the auxiliary layer of protective film a couple of centimeters.
“Close the door” and press the released film against the screen. We place the card parallel to the plane of the screen and straighten the film, squeezing out air bubbles.
Slowly and gradually detach the auxiliary layer of the protective film from the side of the screen, and at the same time evenly press the plastic card onto the surface and level the film. Watch for air bubbles. They shouldn't exist. The main thing is patience. And everything will work out. For those who don’t understand, watch the video again.
And finally, don’t forget to remove the second auxiliary layer of the “shirt” from the protective film on the outside. When I first glued a protective film onto the Motorola Defy screen, I unknowingly spent a whole month with an auxiliary layer on the outside of the protective film. And then I wondered for a long time why it was so cloudy, and why my fingers glide so poorly across the screen :)

What to do if you couldn’t stick the protective film on the screen beautifully

The film must be removed. But under no circumstances should you pry it. Just stick a piece of tape on the corner and pull it.
Then the film must be washed, dried and the procedure for applying the protective film must be repeated again.

Screen mobile device is its main detail. After all, it is the display that the user has to interact with. It is also the most fragile element of the structure. If, when designing the body of a device, the manufacturer is free to be guided by his imagination and can choose any material, be it plastic, carbon fiber, metal or even Kevlar (yes, the same one that is used in body armor), then the design of the screen imposes its own serious limitations.

The display must be thin, durable and transparent at the same time. Only two materials can satisfy these criteria - glass and plastic. The first one is scratch resistant high degree transparency, but quite sensitive to shock loads and has an increased cost. Plastic is cheaper and less resistant to falls, but its level of transparency is lower and its susceptibility to scratches is higher.

In any case, there are a number of situations for which these materials are not prepared. The way out of this situation is to use a protective film. It allows you to avoid damage to the touch surface under the influence of foreign objects, protects the coating from dirt and light falls, since even a thin layer of polymer is shock-absorbing.

How to properly apply a protective film to a smartphone screen? This is exactly what you can find out below.

Many service centers provide services for gluing protective film to the display of a smartphone or tablet. However, their cost often significantly exceeds the price of the coating itself. In fact, with proper preparation, this operation is not particularly difficult; you should absolutely read the instructions on applying a protective film to your smartphone and do it yourself at home.

Where to begin?

As a rule, specialized films intended for specific model devices are supplied with all the necessary tools (napkin, plastic card for smoothing). The situation is a little more complicated with universal ones. Firstly, they are often supplied “pure”, without additional packaging or accessories. Secondly, you often have to adjust the shape to the size of your device.

How to cut universal screen film?

Do not cut the universal film for the smartphone screen with scissors. Even the best of them may have a loose fit between the halves, which can cause burrs and deformations of the product. A very sharp knife or razor (not a razor) is best. Also, for cutting you will need a ruler made of durable material, or better yet, a corner.

The last point can also be done on a universal protective film, but only if the device display is made of durable glass, and the razor or knife is made of steel. And do this at your own peril and risk. After all, as you know, it is impossible to scratch glass with steel, but cutting plastic is as easy as shelling pears.

Let's start gluing

Requireded tools and materials:

• protective film;
• a cloth that does not leave streaks or fibers on the surface (microfiber);
• a thin plastic object (for example, a bank card).

To properly stick the protective film, it is advisable to carry out manipulations in clean room where there is no dust. Otherwise it will turn out like this

Procedure

1. Wipe thoroughly touch screen smartphone. Remove all traces of fingerprints, smears, and dirt. It is advisable not to hold it with your hands, but to place it on the table.
2. Prepare all tools and materials.
3. Take the film and start shooting from it protective layer polyethylene, glued on the sticky side.
4. Having previously “aimed”, apply the free end of the film to the smartphone screen. Make sure that all the holes are in place - sensor eyes, cameras, buttons, speaker, etc.
5. Using a thin object (such as a credit card), smooth out the applied area to avoid any bubbles.
6. Continue removing the protective coating while pressing and smoothing the film.
7. If air bubbles appear, stop and slightly pull the free end of the screen film up to the point where the bubble appears. After this, re-apply it to this area and smooth it out thoroughly.
8. Follow steps 6 – 7 until gluing is complete.
9. Finally smooth out the film and remove the top protective covering (not all types are equipped with it; usually products with double protection have 2 “tabs”, which indicate which one to remove first (bottom) and which one to remove second).

Alternative ways to apply film

There are other ways to apply a universal protective film to the screen. For example, some craftsmen use a “liquid” option (similar to the method used when tinting car windows). In this case, a thin layer of water is first applied to the screen. But there are several nuances here.

• Electronics are afraid of moisture. Water ingress can damage the smartphone, so this method is contraindicated for inexperienced users.
• Displays equipped with an oleophobic coating are difficult to “tint” in this way (the water will not cover it with a layer, but will “grab” in drops). However, for such screens, the use of film generally makes little sense.

In general, the method differs little from that described above. Its only advantage is that the water wets and pushes out small dust particles that can cause air bubbles.

Watch the video to see what gluing film with water looks like.

A way to stick film on a small screen

Glue film onto screens small size(up to 4") can be done more quickly by immediately removing all the protection from the adhesive side.

The procedure for gluing the film

1. Clean the screen from dust, dirt and fingerprints.
2. Remove protection from the bottom layer universal film. After that, hold it by the edges without touching the adhesive side!
3. Place the central part on the screen, having previously centered it so that all the holes are in their places and lie flat.
4. Smooth the film from the center to the edges.
5. When bubbles appear, carefully use a thin plastic strip (the same card, for example) to lift the edge and peel off the film to the point of the bubble. Let the air flow out, smoothing it smoothly.