iPhone 5 modem mode functions. How to use iPhone as a modem


If you have an iPhone and access to mobile internet, then you can connect all your other devices, such as computers, laptops or tablets, to the internet. To do this, the iPhone has a modem mode function, which allows you to quickly create a Wi-Fi access point and distribute the Internet to other devices.

This article will teach you how to enable tethering mode on iPhone. The material will be useful for owners of all iPhone models, including iPhone 4, 4s, 5, 5s, 5c, 6, 6s and 7.

Step No. 1. Turn on mobile Internet.

In order to enable modem mode, you first need to allow iPhone access to the mobile Internet. Therefore, first of all, you need to go to the “Cellular” settings section and enable the “Cellular Data” function there.

Once “Cellular Data” is turned on, you can move on to the next step.

Step No. 2. Turn on modem mode.

After mobile Internet access is enabled, you can enable modem mode. To do this, return to the main iPhone settings menu and go to the “Modem Mode” section.

In this section of the settings you need to enable the “Modem Mode” function. To do this, move the switch to the “On” position.

After enabling modem mode, the iPhone will begin distributing the Internet via Wi-Fi. In order to connect to the Wi-Fi network created by the iPhone, use the network name and password, which are indicated immediately under the “Modem Mode” function.

If necessary, the password for accessing the Wi-Fi network can be changed. To do this, click on the “Wi-Fi Password” section and enter a new password.

You can make a wi-fi router out of an iPhone and distribute the Internet to other devices. Very useful if you are far from home if your laptop does not have a 3G modem. In this article we will talk about how to enable iPhone tethering mode, as well as some problems that you may encounter in the process.


After this, the mobile device will turn into a mobile access point and begin to “distribute” the Internet. You can connect to it via Wi-Fi using the password that is displayed in the mode settings.

Be careful: the enabled wi-fi modem mode is not displayed anywhere. But the battery on your phone drains faster.

When another device connects to you, you will see this message in the status panel.


Setting up another device connection

To connect to the created Wi-Fi network from another device, go to the network settings on this device. Select the name of the wi-fi point that you specified in the settings. And enter the access password.

This is what connecting to an iPhone on a MacBook looks like. On other devices, the connection icons will be identical.

It is worth highlighting several main features of using modem mode:

  • Don't expect high speeds, since the Internet connection is via a mobile network.
  • When modem mode is activated, the autonomy of the mobile device is slightly reduced.
  • Some mobile operators may impose some restrictions on the number of simultaneous connections to one device.

What to do if modem mode on iPhone cannot be activated

In some cases, to activate modem mode, users will have to make a number of additional settings. It depends on the cellular operators. In particular, here is an article on how to enable yota modem mode. The general principle is this:

Mobile operator data:

Russia

Beeline / Beeline

  • APN: internet.beeline.ru
  • Username: beelin
  • Password: beeline

MTS / MTS Russia

  • APN: internet.mts.ru
  • Username: mts
  • Password: mts

MegaFon / MegaFon

  • APN: internet
  • Username: gdata
  • Password: gdata

Tele2 / Tele2 Russia

  • APN: internet.tele2.ru
  • Password: leave blank
  • APN:yota
  • Username: yota
  • Password: yota

Ukraine

Kyivstar

  • Username: leave blank
  • Password: leave blank

Lifecell Ukraine

  • APN: internet
  • Username: leave blank
  • Password: leave blank

MTS Ukraine

You can clarify your APN data by calling 111 for MTS Ukraine users.

Dmitry Marishin

Once upon a time, it was very common to use the service of cellular operators in the form of a mobile router to access the Internet. Thanks to this router, it was possible to connect to the web network almost anywhere where there was operator coverage. They were replaced by smartphones when they added the function of an Internet access point, that is, modem mode.

Despite the fact that the ability to use an iPhone in modem mode has existed for a long time, not everyone knows how to set it up and enable it.

Setting up and enabling modem mode on iPhone

You can use your iPhone as a modem to connect your laptop, tablet, or other smartphones to the Internet.

1. Check if the Modem Mode function is available

Open "Settings" and find the line called "Tethering Mode". If it is, then just turn it on. If the access point is not displayed, then it may not be activated and you may need to contact your operator and ask them to enable this service. It is usually enabled by default.

2. Set up the connection

Go to: Settings > Cellular > Data Options > EnableLTE".

Here it is necessary that the connection data be filled in. Especially in the “Modem Mode” section. Usually they are registered automatically if the service is supported and connected by the mobile operator.

Cellular operator data settings

MTS - automatic Internet settings on iPhone.

  • Send an empty SMS to the short number 1234. In a few minutes you will receive automatic settings that you will need to save.
  • Call 0876.

MTS - manual Internet settings on iPhone.

  • APN: internet.mts.ru
  • Username: mts
  • Password: mts

Megafon - Internet settings on iPhone.

When you install a Megafon SIM card, mobile Internet settings are installed automatically.

If necessary, you can check them:

  • APN: internet
  • Username: gdata or leave blank
  • Password: gdata or leave blank

Beeline - automatic Internet settings on iPhone.

  • Activate the Internet Access service by dialing *110*181#
  • Next, receive automatic installation by calling 0880. The password for saving settings is 1234.

Beeline - manual Internet settings on iPhone.

  • APN: internet.beeline.ru
  • Username: beeline
  • Password: beeline

Tele2 - automatic Internet settings on iPhone.

  • You can get automatic installations by clicking on the link >
  • Or order them by calling 679.

Tele2 - manual Internet settings on iPhone.

  • APN: internet.tele2.ru
  • Password: do not fill in

Win Mobile - manual Internet settings on iPhone.

  • APN: internet
  • Username: leave blank
  • Password: do not fill in

Wave Mobile - manual Internet settings on iPhone.

  • APN: internet
  • Username: internet
  • Password: internet

Yota - manual Internet settings on iPhone.

  • APN: internet.yota
  • Username: leave blank
  • Password: do not fill in

In most cases, when you install a SIM card of a particular operator into your iPhone, an Internet connection is established automatically.

When entering parameters manually, while in the “Cellular Data Network” section, in the “Cellular Data”, “LTE Settings (optional)” and “Modem Mode” sections, fill in the data in the same way. After you have entered the connection parameters manually, you need to disconnect the smartphone from the power supply for 1-3 minutes, and then turn it on again.

3. Turn on the Internet

To do this, go to: “Settings” > “Cellular” and set the “Cellular Data” switch to the On position, that is, green.

4. Enable modem mode

  • Go to “Settings”, where you find the line “Modem mode” and click on it.
  • Turn on modem mode.

For convenience, in the “Wi-Fi Password” line, an automatically generated password is immediately displayed to you. In case you want to access the Internet from another device via iPhone via a wi-fi network. Other connection methods are also available: USB cable and Bluetooth.

If you have any questions, or want to get more detailed advice, write to us on social networks, or call:

Our phone number: +7 978 773 77 77

Unfortunately, access to free Wi-Fi is not available everywhere and this often causes serious problems. If you don’t have a 3G modem at hand, then it would seem like it’s time to start despairing. However, not many people know that using their iPhone, any user can create an Internet access point and distribute Wi-Fi to other devices.

You can use this feature in any way you like: help out friends who have run out of traffic on their smartphones, access the Internet with an iPad Wi-Fi only, or connect the same laptop while on the train. The best part is that setting up an access point, unlike routers of various models, on an iPhone will take you less than a minute.

Step 1: Make sure the menu Settings -> cellular switches activated Cellular data And Enable 3G

Step 2: Go back to the menu Settings and go to Modem mode

Step 3: Activate the Slider Modem mode. If Bluetooth is turned off, the system will give you a pop-up message asking you to activate it. If your computer has a Bluetooth adapter, then select Enable Bluetooth for further connection

Step 4. Enter the desired Wi-Fi connection password

After completing these simple steps, you will be able to connect to the Internet from another device or directly from your computer. And if the situation with the Wi-Fi connection is clear - you just need to scan the space for the presence of active wireless networks from any device that has Wi-Fi, then the case with connecting via USB needs to be analyzed in more detail.

In order to access the Internet from a PC using your iPhone as a modem using a USB cable, you need to:

  • Connect iPhone to computer
  • Go to Control Panel -> Network and Internet ->View network status and tasks and make sure that the connection is activated
  • If this connection is not shown, restart your computer and connect your iPhone again

Attention: you may need to reinstall iTunes (it is advisable to use the current version).

Articles and Lifehacks

The high technologies of our time have virtually no limits. This largely applies to mobile devices, which raises the question among iOS device users. how to use iPhone as a modem.

The fast pace of life forces you to move and change your location all the time. The less a person is tied to his desktop computer, the more opportunities open up to him. In particular, he can access the Internet from his smartphone exactly when he needs it.

Many mobile operators today offer a modem that connects to a laptop via USB. However, they don’t always have time to buy it, and sometimes you just don’t want to spend money. However, there is a way out - use your mobile device as a modem, or as an access point for distributing a Wi-Fi network.

Principles of using iPhone as a modem

You should be aware that a smartphone can only be used as a modem via a wired connection. In this case, the user will need to understand some of the settings of his computer.

If he is new to this, it will be easier for him to configure his mobile device as a router. The latter method is suitable not only for iOS, but also for devices that run on the popular Android platform.

Luckily, Apple has simplified the procedure on how to use your iPhone as a modem. She built a special function into her device that allows her to configure it accordingly. The method is also suitable for iPad tablets that support SIM cards.

The mobile device can be connected to a PC and the Internet via Wi-Fi via Bluetooth, or via a SIM card. In the latter case, the smartphone will distribute Wi-Fi and act as a router, and the user will be able to appear online from another device that supports wireless communication (for example, a tablet or laptop).

Some time ago, the App Store offered a special program for using the iPhone as a modem. It could be purchased online. However, just a few days later the application was deleted, and today there are no analogues to it and, apparently, there will not be any.
That is why it is advisable to learn how to configure your smartphone to access the Internet yourself.

Instructions for using iPhone as a modem

It should be immediately clarified that users of devices starting with the iPhone 3G model will be able to use the instructions.

Through the main screen of the device, go to the main settings and select the “Modem mode” item in the “Network” menu. Let's activate it. Next, select the connection mode – “USB Only” or “Wi-Fi”.

Now a little about setting up these very modes. When selecting the “USB Only” item, connect the smartphone to the PC using a USB cable (you can find it in the standard delivery package, that is, in the box from the device) and download the iTunes program from the official Apple website and install it (if this has not been done previously ).

A window appears on the PC monitor asking you to decide on the connection method. Select “Connect to the Internet” and click “Next”.

When choosing the “Wi-Fi” mode, come up with a password for the new network and enter it on your smartphone. After that, in the lower right corner of the computer, find a list of available networks and select your own network. Click “Connect” and enter the password. Thus, everything is extremely simple.
Connection via Bluetooth is allowed, but the Internet speed leaves much to be desired.


2024 gtavrl.ru.