Connectify hotspot what kind of program. We distribute Wi-Fi without a router (Connectify program)

Features of the CONNENCTIFY setting.
If it’s very simple to answer the question of what CONNECTIFY is, then we can say with confidence that this program allows you to distribute Wi-Fi through the Wi-Fi adapter built into the device. If the motherboard without such a device, the CONNECTIFY programs are helpless in this case.

Connectify has proven itself in Windows7, operating systems 7 rki the best way allows you to configure Connectify. Therefore, the choice of operating system is quite important. OC XP is simply ignored by Connectify.
Eight, incredibly difficult for normal program settings, and more that Windows 8 may terminate Connectify at any time. Based on and the best conditions operating system for Connectify, it is suggested to use Windows 7.
Therefore, the settings of the Wi-Fi distribution program are considered using the example of the seven.
Installation.
Download the installation files and run the program. Pop up window on screen
installation wizard. We indicate our agreement with the rules by clicking the button "I agree"
As a result of the agreement with the product license, the wizard will begin the installation. Only after the wizard has completed his work will we need to click on "Reboot now".

We restart the computer.
Access point.
Finding the icon installed application. Launch the application by clicking on the icon. The program settings window will pop up. All settings are in English.

“Hotspot Name” - enter the name of the network in this field. It is not recommended to enter your full name. A short and easy to remember name is desirable.
Password- password. However, the window will become available for data entry only after selecting encryption WEP WI-FI Ad-hoc. Which we find in Sharing Mode, choosing from the proposed menu. By clicking on the triangle, you will see options on the right.

"Share Over"" - window Wi-Fi selection adapter.
"Internet to Share"- selection of network card. We do the same as in the Sharing Mode window.
We entered all the data and wrote down the password on a piece of paper. And click the Stop Hotspot button.

If everything was done correctly, the icon will appear new network, which we look at in the tray.

We see our name, which was entered earlier and this means that the network is ready for distribution.
You can connect to it with any device.
Features or additional properties
“Clients” - opening this shortcut, we see a list of all devices connected to the network. Having rummaged around there, you can find MAC addresses in the form of a list.
“Services” on this tab you can see the connection speed.
And the “Histori” tab will allow you to see the entire connection history.
That's all that can be said about the program, its settings and functions.

Often, users of home computers and laptops are connected to the Internet via a local network or modem. But in modern world In addition to a computer or laptop, everyone also has other devices (tablets, smartphones) that need an Internet connection. One of the options for connecting multiple devices is to purchase Wi-Fi router and connecting all your devices through it. Second method, if you have a built-in or separate (for example, USB-) Wi-Fi adapter, can be organized programmatically virtual point access and connect all your devices to it. To do this, you will need a program that is small in size but powerful in functionality - Connectify.

System requirements

The application runs on Windows 7 and 8+. For normal operation your future access point, the adapter must support Virtual Wi-Fi. In any case, before installing the program, I recommend updating your Wi-Fi adapter driver to the latest version.

Basic setup

Although the program has a simple and clear interface, its setup may not always go smoothly, but let's talk about everything in order.

First of all, install the application on your computer. When you first start, you should make some settings, namely: come up with a name for your future point access and enter in the "Hotspot Name" field, create a password (8 - 63 characters) and enter in the "Password" field, select network interface(network card, modem) through which you access the Internet, from the "Internet to Share" list. The "Advanced Settings" section can be left untouched if you plan to distribute the Internet only via Wi-Fi.

Click on the "Start Hotspot" button and network Wi-Fi card your computer will turn into wireless point access.

Additional setup

But that's not all! Now you can connect your phone or tablet to your access point and check for Internet access. If you have it, you're lucky! I was unlucky: I was able to connect to the computer, but I did not get access to the Internet.

If you are unlucky, do the following: click on the network icon in the tray, click on the “Network and Sharing Center” link at the bottom. In the window that opens, in the menu on the left, select the option “Change adapter settings.” In the window with network devices available in the system, select the one through which we access the Internet. Right-click on it and select “Properties”.

Go to the “Access” tab, check the box “Allow other network users to use this computer’s Internet connection”, agree to the warnings and from the drop-down list select the virtual adapter created by the Connectify program (usually “Wireless” network connection 2").

We save the settings and reconnect to the Internet on the computer by clicking opposite network connection to the Internet "Disconnect/Connect".

We try again to connect to the Internet on a device connected to the computer via Wi-Fi. At this step, I was able to access the Internet from both my laptop and my phone.

But that's not all! The Internet may lag and disappear periodically. To solve this problem, do the following: in the same window with network adapters, go to properties virtual adapter Connectify programs.

In the dialog box that opens, click on the “Configure” button.

Go to the "Power Management" tab and uncheck the "Allow the computer to turn off this device to save power" checkbox.

At this point we can assume that we have configured a virtual access point. There may also be problems associated with the “Connectify” program being blocked by various antivirus firewalls (Kasperskiy, Norton), including the built-in Windows Firewall. In this case, you should add the program to exceptions or, alternatively, temporarily disable the firewall.

Was limited by the presence of an ADSL modem or cable for network card. Very often, Internet providers used restrictions on the ability to split the “Internet signal” across several computers. Violation was subject to a fine in the form of increased fees. Today, almost every operator allows you to use the Internet connection at your own discretion. ISP offerings include not only network access service, but also devices that provide Internet access to more gadgets. One of best solutions Today, the Connectify program is used to distribute the Internet.

Setting up Connectify for Wi-Fi distribution.

Let's use Connectify in practice and create an access point - Hotspot. Before setting up and installing, it is recommended to visit the page technical support and check if the network cards are compatible and supported by the application. To install the program, download and run it, after which the New Software Installation Wizard will open. Click the “I Accept” button and confirm to restart your PC.

Setting up a Wi-Fi adapter with an access point

How to set up Connectify? Top part screen with the “Settings” section contains the most important parameters applications:

• Wi-Fi name – the name of the network we are creating. wireless network or, in the case of coverage expansion, the name of the network being expanded;
• Password – password for the wireless network;
• Internet - here you need to establish a network connection - usually this is a “connection via local network» (cable) or in the case of the Internet via a 3G modem - telephone connection;
• The mode is hidden by default, it allows you to configure the operating mode (access point using WPA2-PSK encryption, Ad-Hoc in open mode or WEP encryption);
• The “Easy Installation Wizard” button allows you to set the necessary parameters in a few minutes. simple steps, which define the network name, password and general connection, and will also help you figure out how to use the Connectify application.

General settings

You can launch the wizard and follow a few simple steps:

• On the first screen, click the “Next” button;
• At the second stage, the wizard will prompt you to enter a wireless network name that will be available to other devices;
• The third step is to set a wireless network password. The password must contain at least 8 characters. Default network encryption is WPA2-PSK;
• At the fourth step of the wizard, you can select a connection. The connection names (loaded from the operating system) are displayed as a drop-down menu. In most cases, you need to select "Local Area Connection";
• The last step of the wizard is to confirm the changes and allow Hotspot to launch.

On the main screen of the application window, the connection status and hotspot will be displayed at the top of the window.

Setting up the connection type

After setting up the application, it is worth remembering that the firewall is initially configured correctly. If you have a built-in firewall, Windows Connectify will handle the settings automatically. Other firewalls should be updated with the following network rules:

• Access for Connectifyd.exe, opening ports: UPnP – UDP 1900, TCP 2869, 5000;
• Access for ConnectifyNetServices.exe, opening ports for DHCP – UDP 67, 68, 1317 and for DNS – UDP 53, 1303

Additional Information:

• Clients – provides information about those connected to the created Wi-Fi networks clients along with IP addresses and their names. Click right button mouse on the icon allows you to block or unblock network access, as well as quickly view available network resources, connected client and so on. Default connection address: 192.168.2.0/24;
• Connection history – a summary of previously connected network clients;
• Start/Stop Hotspot – button for Connect Hotspot.

Right-clicking the Connectify logo or text opens a pop-up menu containing hidden functions(for example, setting up a connection to a wireless network). You can also enable or disable UPnP server(this option is useful for Xbox users, for example). Clone option Wi-Fi settings allows you to customize Connectify Hotspot and clone wireless network settings, expanding its coverage through a computer with Connectify. The WPS menu allows you to save the network configuration to a flash drive and transfer it to another computer.

Emerging problems and their solutions

To easily distribute IP from using Connectify, you need to configure the access point correctly. If problems occur, first check for new versions of network card drivers or motherboard on the manufacturers' websites. If Connectify still does not distribute the Internet, check your connection settings. Go to the “Network and Sharing Center” section of the control panel and check your Internet connection settings. IP, DNS, subnet mask, etc. must be specified. If problems occur, to determine correct settings network connection, you should contact your provider.

Looking at how the Connectify app works, it seems that the Internet connection sharing mechanism is almost a clone of ICS (Internet Connection Sharing), known for many years on Windows. In a sense, this is correct. However, ICS configuration can be overwhelming for a novice user. Problems can also arise when connecting computers to a VPN network.

• easy installation and configuration;
• opportunity quick access to the hot spot;
• many use cases;
• low cost – in case Wi-Fi purchases adapter, and in the case of a laptop – free of charge.

• lack of support for popular 3G modems;
• The computer connected to the network must be turned on at all times.

Often sharing wireless connection with your computer is an easy way to temporarily share your Wi-Fi network with other devices. Connectify makes it easy to distribute the Internet to many network devices. No complicated settings for the operating system. The application has one more advantage - it is free.

Almost all self-respecting establishments try to provide access to Wi-Fi, including cafes, restaurants, hotels, etc. At home, many users also prefer to get rid of wires and cables. Tune wireless Internet possible in several ways. So, a router is designed for this purpose. You can also manually configure network adapter, which is available in many laptop models. But the simplest and in a convenient way is to install a program like Connectify.

Installing Connectify

Before you set up the Connectify Hotspot program, like other versions of this wonderful utility, you should download it to your computer. It should be noted right away that using the program is impossible if the laptop does not have a built-in adapter. However, almost everything modern models equipped with this device.

So, download and install the program on your computer. To do the latter is quite simple; just use the prompts that the Installation Wizard will give. The next step is to restart the computer and open the main utility window. Here you will need to enter required settings. In the Hotspot Name line, indicate the name of the Wi-Fi point. After this, you must enter a password. This will increase the security of your wireless connection and prevent other devices that have nothing to do with you from connecting to the network.

The Internet to Share line will contain a list of network cards. You need to choose the one that is connected to the Internet. In Share Over, we mark the adapter that will serve as a distributor and access point to the network. The Sharing Mode line allows the user to select the mode in which the adapter will operate. Their program developers provided two. First, Encrypted, which requires you to enter a password. Secondly, Open, in which Ad-Hoc mode will not require a password.

After the necessary settings have been entered, you will need to click on the Start Hotspot button. If everything is done correctly, then by the program icon you can determine that it has become active. Now we try to connect to Wi-Fi from a smartphone or laptop. If you configured the utility correctly, then you should be able to do this without any problems.

So, we looked at how to set up the Connectify Me program and other versions of the utility. As you can see, it's not too difficult. Moreover, the possibilities offered by the developers of the utility are quite wide, which is why it is becoming increasingly popular among those who prefer to use wireless Internet.

As you already understand, this program is suitable for sharing any Internet, be it a modem, twisted-pair Internet or optical cable, or maybe a 3G modem. It doesn’t matter if you have the Internet, which you need to multiply, a Wi-Fi adapter (built-in or external), the Connectify program and Windows 7.

A machine can be not only a laptop, but also a netbook, your personal PC, etc.

Creating a Wi-Fi point without a router

I would immediately like to draw your attention to the compatibility of the program with your operating system, but it only works on Windows 7. Therefore, there is no need to ask later stupid questions in the comments, they say why the software doesn’t work for me on Windows XP, and even more so, ask why it doesn’t work under DOS. Only Windows 7, I don’t know why the developers of this program decided this way, “seven” and that’s it.

A little about the program

The Connectify program, which is the subject of our article today, is available in both paid and free version. The price to pay for being free is some limitation of functionality. Please review this table carefully to avoid possible questions further:

Function	Lite version	Pro version
Software access point	Yes	Yes
Internet distribution from other Wi-Fi networks	Yes	Yes
View a list of connected devices	Yes	Yes
Simple firewall management interface	Yes	Yes
Internet distribution from 3G/4G networks	Limited	Yes
File sharing via Drag-and-Drop	Limited	Yes
Search for open resources on network-connected devices	Limited	Yes
Ability to configure SSID (network name)	No	Yes
Repeater function (extends home/office network coverage using the same username and password)	No	Yes
Automatic selection of Internet connection type	No	Yes
Extended technical support	No	Yes

After the reboot, Connectify will launch automatically, and the screen will display information about the main features of the application, as well as an offer to buy the Pro version, or start working with the Lite version.

For full use Connectify requires a Windows 7 computer, as mentioned at the beginning. The cost of the Pro version is about 950 rubles. The application distribution, just over 6 MB in size, can be downloaded from the official website.

How to set up Connectify?

The program is absolutely free. You can download the latest version from the official website of the program by going to section (1) HOTSPOT and clicking the button (2) Download.

There should be no problems with installation: it is simple and does not require only standard actions. After installation, I advise you to restart your laptop/computer. Next, let's move directly to the question itself. How tune program Connectify.

Now, after rebooting the machine, the Connectify program icon with a crossed out circle will “hang” in the tray, which means there is no active access point:

Everything is very simple:

WiFi Name is the name of the access point being created

Passphrase - password to created point access

Internet - here we will dwell in more detail because... This point is quite important: in the Internet field, you choose which Internet you are going to “share”:

Next, we definitely need to enable " Wireless network connection" And " Wireless network connection 2" (it was created automatically when Connectify installation), as well as Wi-Fi itself. Usually the button to turn on the Wi-Fi network is located on the laptop body. I don't think you foolish man and find out how to turn on your car’s Wi-Fi:

After completing these steps, you can click on “Start Hotspot"

The setup on your computer is ready. In the tray you will see wifi icon connections:

And the program window will display the status “Status" and the connection type "Access Point" (Access Point):

Also in the connections tab, two active “ Current connections": the Internet (Network) you have selected for distribution and your access point (User):

You can connect devices and use the Internet. When connected, the device is displayed separately in the “Connected Clients" column (IP address is also there), and next to the file-width icon in the tray you will see an image of a little man:

A little about speed

There is no need to say much here. I will show you visual images

Internet speed test on computer (ADSL)

We used an iPhone as the connected device. As you can see, he found our access point without any problems and successfully connected to it

Emerging problems and their solutions

The first thing you may encounter is a falling connection. To solve this, go to “Control Panel\Network and Internet\Network and Sharing Center\Change adapter settings.” Go to the properties “Wireless network connection 2” and then “Configure” next to your Wi-Fi adapter. Then, on the “Power Management” tab, you need to uncheck the box next to “Allow the device to turn off to save energy.”

The second thing you may encounter is an error creating an access point. There may be many reasons, but you can check the following basic points: turn off Windows firewall via “Control Panel\All Control Panel Items\Windows Firewall”. If there are third-party firewalls, then I advise you to disable them for a while as well. they may block the connection.

The third is the absence of any connection in the list of available for “sharing”. In this case, I advise you to download more earlier version programs, since in newer versions of the program they can add various little things, but also miss something at the same time, and vice versa, some bells and whistles of the program make it simply less efficient.

Well, as a conclusion: Connectify is a wonderful program that will probably be useful to you. It may be easier for you to buy a router and distribute the Internet through it, but it will be cheaper if you have fiber optic or ADSL Internet, but, for example, a 3G router is already quite expensive compared to a regular one. In order not to buy it, it will be enough to have a USB modem. There is also a version of the Connectify program for devices running the Android operating system. I don’t know exactly how to use it, I just provided it as data; anyone who is interested will probably find the information they need, because they came across my article.

I think this program has plenty of advantages, namely, that the source can use any Internet connection and requires a minimum of additional hardware (Wi-Fi adapter, if you don’t have one). The biggest disadvantage I would consider is the lack of support operating systems Windows lines, except for seven, as stated at the beginning of the article. There is also a lack of support for Macintosh and Linux systems, but I think this is not a problem for now, because Windows is still easier and more understandable for the user, and the whole modern world, whatever one may say, uses Windows, because the lion's share software written under Windows.

Well, don’t forget the most important thing: your machine that distributes the Internet must be turned on so that all connecting devices can see the Internet.