Budget tablet for the Ukrainian market. Reinstalling the system or flashing TEXET tablets Which firmware is better for TEXET TM 7026


Most Android users are interested in flashing tablets for many reasons: they need to update the system or have a desire, or to return the device to working condition.

Many people are not satisfied with the standard firmware on Texet TM7866

Be that as it may, the process itself is quite simple, but differs depending on the manufacturer. We will look at how the firmware for Texet TM7866 and other brand models is performed, and how to do everything correctly so as not to harm the device.

What is needed to flash a Texet tablet?

First of all, let's find out what is needed to perform such an operation. Texet TM firmware is done using the following tools:

  • Charged battery - it is best that it is full, or has a reserve of at least 50%;
  • Computer - it will be used to flash the firmware;
  • The PhoenixSuit program, through which the software is replaced - download and install it on your computer;
  • Directly - the file with it must also be first downloaded and saved on a PC;
  • Where can I get the firmware and the program to install it? It is best to look for them on the official website of the manufacturer Texet, focusing on the series marked with the letters TM. Files for replacement software are located in the “Support” section, then select “Downloads”;
  • In the window that opens, you can find files with the program and the new Android image, but carefully check the serial number of your device to download the appropriate archive with the software.

So, when you have downloaded everything, install PhoenixSuit this way:

  • Open the installer, click “Next”;
  • Windows will notify you that you need to install a driver, but it is unverified - confirm its download anyway;
  • After confirming the remaining points, it will happen, at the end click “Done” and close the window.

You have now installed a separate program called PhoenixSuit, designed to update the firmware on Texet TM products.

How to flash a Texet tablet?

Flashing the Texet TM7024 tablet and other models is performed using the following steps:

  1. Again, make sure that the gadget is sufficiently charged and open PhoenixSuit;
  2. Click on the Firmware section;
  3. In the window that opens, specify the path to the file with the system image in the Image line;
  4. If the tablet was turned on, turn it off and press the Home key;
  5. via USB by pressing the above key until a message appears with the text “Tips: Does mandatory format?”;
  6. Answer the question in the affirmative, after which the software replacement will begin - you will be able to observe the process directly in the application;
  7. After the process is completed, the message “Upgrade Firmware Succeed” will appear - just click OK.

You can now disconnect the device and turn it on. By the way, loading will seem a little slow. This only happens at first, because the device is launched for the first time with new software.


In front of you detailed step-by-step instructions about how to flash a teXet TM-7026 tablet. Our editors have chosen the most suitable method for flashing this teXet model. If this instruction does not give any results try flashing using another method: TWRP Recovery, ROM Manager, Fastboot or classic OTA.

Warning! After flashing the device, all your data from the internal memory will be erased, so to save your contacts, settings and applications, first save all data from the tablet.

Installing the system using CWM Recovery 1. Charge the flashed tablet at least 80%. 2. We save all data that cannot be lost from a flash drive, SIM card and tablet memory. The SIM card (if any) can be removed. 3. We place the necessary firmware in the tablet’s memory. The firmware file must be in archive format zip. You can select and download the firmware. 4. All teXet tablets have Recovery from the manufacturer, so we change it to ClockWorkMod Recovery. We do this according to the following instructions: Install the application from Google Play on your tablet. Launch it and grant Root rights. . In the list of options, select “CWM Recovery”. Then the application will show a list of available Recovery. In the example, Rashr showed 2 options: ClockworkMod with support for taps on the screen and the classic version (controlled by the volume and power buttons). You will be prompted to download. Click Yes. Then the CWM Recovery image for the tablet will begin downloading. A notification will appear that the firmware was successful and you now have a modified recovery installed. We immediately go into it, to do this, click “Yes”. Ready. If you have already installed ClockworkMod Recovery, then simply enter it by pressing for 3-5 seconds any of the combinations: - Volume up + power button - Volume down + power button - Volume up/down + power button + "Home" - Volume up + volume down + power button 5. Movement in the Recovery menu is carried out using the volume buttons, and confirmation of the choice with the power button. Before installing the firmware, you must first do a factory reset. Therefore, select the item in the menu wipe data/factory reset.
6. Next, simply confirm that you agree to reset: Yes – Wipe all user data.
7. Now in the main menu of Recovery select install zip.
8. After that select Choose zip from /sdcard.
9. Navigate to the folder where you saved the firmware zip file and select it.
10. A confirmation message will appear. Select Yes – Install....
11. The firmware installation process will begin and at the end the message will appear Install from sdcard complete. The firmware is finished. We return to the main menu of CWM Recovery and reboot the tablet. For this we choose reboot system now.
12. Ready. The tablet will start loading from the already installed firmware. Other materials

Hello dear readers. Today we will talk about the Russian budget tablet texet tm 7016 - made in China. Let’s not dwell on it for long and move straight to the technical parameters.

Tablet Specifications

This is a seven-inch tablet with a resolution of 800x600 pixels, running on the Android operating system version 4.0.3. The processing and distribution of resources is handled by the Boxchip A13 microprocessor with an operating frequency of 1200 MHz, paired with 512 MB of RAM, the internal memory is only 4 GB, but thank God there is a slot for an external memory card.

Appearance

There is only one rear camera of 0.3 MP. Optional built-in speaker, microphone, orientation sensor and accelerometer, what can I say - this is a budget option.

To access the Internet, the manufacturer provided a Wi-Fi module and support for host mode, that is, connecting external devices, for example:

  • Modems;
  • Mice and Keyboards;
  • Flash drives.

The weight of the budget device is about 300 grams, dimensions 193x121x9 millimeters.

The equipment for a budget tablet is quite complete:

  • USB cable for PC;
  • Host cable;
  • Headset;
  • Tablet;
  • Manual, warranty card;
  • Charger.

Unpacking the tablet: https://youtu.be/l-FLbBaEg9Q

Appearance of the gadget

The reverse side of the device has a characteristic insert, which is very reminiscent of the well-known iPad. For those who have never worked on a Tablet PC, engineers have provided graphic symbols of all available connectors and keys.

Backside

On the right side you will find a headphone jack, a charger connector, a USB connector and a slot for an external memory card, as well as an HDMI input for connecting to any devices with a similar connector.

Right side edge

As you can see, there are bolts on the sides, so be sure that it can be disassembled if something burns out or needs to be changed.

Top side edge

On the top edge, according to tradition, there is a key to turn on/off the tablet computer, a volume key and a mechanical return button.

In addition, the reverse side was made of metal - most likely aluminum.

External modem connections

As mentioned above, the tablet PC runs on Android 4, so setting up and operating the product will not take much time and will be intuitive.

Desktop

Standard desktop of an Android device

Application menu

A menu that displays all installed applications. We find the settings and click.

Setting up an external modem

As mentioned above, the tablet does not have a built-in 3G module; it only has the ability to work with external devices. To do this, we purchase a modem, buy a starter package with the Internet (modern ones are already built-in).

It is important to know that before purchasing, check the modem for compatibility with the device.

We connect and go to settings/More/Mobile network/ at this point we turn on data transfer - this is very important, without this it will not work. Next Access point/Functions/Create a new connection point.

Mobile networks

You will have a whole list of fields that you will need to fill out in accordance with your mobile operator - do not be alarmed right away, since you will only have to fill out four fields, such as:

  • Connection name;
  • Access point;
  • Username;
  • Password.

The name of the connection point can be anything, but the rest must be as written.

APN

  • For MTS: internet.mts.ru
  • BeeLine - home.beeline.ru
  • For Megafon - internet
  • tele2: internet.tele2.ru

Username

  • for MTS: mts
  • BeeLine - beeline
  • Megaphone: empty
  • tele2 – empty

Password:

  • for MTS - mts
  • for BeeLine: beeline
  • Megafon - empty
  • for tele2 - not necessary

We check again for correctness, save and reboot the device. We turn on data transfer again and use it.

To connect via Wi-Fi, you just need to turn on the module and wait until the area is scanned and connected to the selected point.

Wi-Fi connection

Device firmware

Before installing new firmware, you should soberly understand that everything that will be done at this point is done at your own peril and risk; the site administration and the author do not bear any responsibility for all consequences. Therefore, we recommend that you do not try to flash a tablet computer without the necessary importance and without any knowledge - a working gadget is better than a broken and invalid warranty card.

First, download the LiveSuit firmware program: http://4pda.ru/pages/go/?u=http%3A%2F%2Ftexet.ru%2Ffiles%2FLiveSuitPack105_english_1352960642.exe

Download the necessary drivers for the tablet itself:

http://narod.ru/disk/64815553001.02962bc6c616a8c0bb9ac1c49bdc2d38/UsbDrivers.rar.html

After installing the program on your PC, a folder will be automatically created - UsbDriver; it is in this folder that we place the above drivers. Now you need to download the firmware itself; for this, go to the manufacturer’s website:

http://www.texet.ru/support/files/ or download it from unofficial sites, such as: 4pda.ru.

Instructions:

  • Launch the PC program;
  • Turn off the tablet PC and press the Volume + button;
  • We connect the device to the PC without pressing the volume key;
  • Immediately press the power key 3 times, without releasing your finger from the volume;
  • Now the computer will prompt you to install the appropriate driver - select manual installation and go to the previously created folder with the driver;
  • After successful completion, turn off the device;
  • Now again we go through steps 2-3 and select the firmware in the program (graphics cube);

Firmware program

  • In the window that appears, click “Yes”;

Firmware installation

  • Click yes again and wait for the software update process to complete;

Installation completed successfully

At this point, the installation is successfully completed, disconnect the tablet PC and turn it on - the process will take a little longer to load, this is normal.

Obtaining root rights is not required, since the device is already rooted upon purchase.

Some problems and operational questions:

  • What is the difference between Texet TM 7016 and 7026

The first of them is intended for the Ukrainian consumer, the second for the Russian

  • The tablet gets very hot

This is normal, it works - but you shouldn’t overload it (several dozen processes at once), it was made in China, which means that the material and equipment are not of very high quality.

  • External modem does not work

Checking its functionality on another device, checking whether the cord is damaged, and also checking its compatibility with the tablet is very important.

  • Firmware won't install

When connecting to a PC, try holding down the power key and the Reset button (in the depth of the microphone) until the computer is detected as a device.

Full review:


2024 gtavrl.ru.