Autostart of Windows 7 programs. Changing startup through third-party software

Before its release, everything was much easier - in Windows XP there was a Startup folder in the Start menu and there were all the programs that launched along with the OS.

Windows 7 also has such a folder, but it is often empty or there are very few programs in it - clearly not as many as are actually in startup.

But besides its main function, this program performs many auxiliary tasks. One of them is editing the startup folder.

Downloading the program

Latest version CCleaner can be downloaded completely free of charge on the official website by clicking on the inscription “CCleaner” (in figure No. 7 highlighted in blue).

Rice. No. 7. CCleaner official website and program download page

As you can see, there are also versions for Mac OS and Android.

Advice! Download the full version CCleaner version, and not CCleaner Portable or CCleaner Slim, because these are stripped-down versions and may lack some functions. To do this, click exactly on the inscription that is highlighted in Figure No. 6.

Another verified link - after clicking on it, you need to click on one of the links under the inscription “Download from” in the “ column CCleaner Free"(highlighted in Figure No. 8).

Rice. No. 8. CCleaner download page on piriform.com

You should run the download file and wait for the installation to complete. This process is quite standard here and usually does not take much time.

Using CCleaner to Access Startup

After launch, select the “Service” tab in the menu on the left. Next, you just need to go to the “Startup” tab in the CCleaner services menu.

These points are highlighted in red in Figure 9.

Rice. No. 9. Access to startup downloads via CCleaner

Using CCleaner for working with programs in startup is somewhat different from what we saw in the standard one Windows window system configuration.

Here, to remove a program from startup, you need to click on it in the list, and then use the set of commands located on the right side.

In Figure 8 they are highlighted in yellow.

There are “enable” commands (available only for those turned off on this moment programs), “turn off” (available only for enabled programs) and “delete”.

Hello, dear readers of the blog site. Any program written to perform any action should make it easier to perform these same actions. Otherwise there will be no meaning in it. Actually, programs differ from each other in how much better one performs certain actions than the other. The operating system is designed to perform actions in the same way in the best possible way. It's hard to imagine a good operating system that would require you to manually start everything every time you turn it on. system programs, which you use every day, regardless of the work you do. Just imagine, you turn on the computer, Windows 7 loads and you start launching applications such as:

• program automatic switching incorrect keyboard layout
• cloud storage services Dropbox files or Google Drive
• a program for working with devices via Bluetooth and much more.

Naturally Windows developers At the very beginning of the creation of the operating system, we came up with a tool that allowed us to automate the launch of all the applications you needed in automatic mode without your participation. The service received the natural name “Startup”. This service is a list of programs with parameters that must be launched immediately after start operating system. It also allows you to separate which programs to run for different users. One user can run one program to correct the layout, another can use a completely different application. And it's very convenient. To configure startup for yourself, you need to know how to view windows startup 7 and how to configure Windows 7 startup.

How to view Windows 7 startup

The developers of Windows 7 OS decided to divide startup into two parts. The first is available as a folder in the start menu. This is called “Startup”. Open the folder and everything in it will be automatically launched. However, these are not all programs and applications that are in startup.

The main list of items is in the "system configuration". To view the Windows 7 startup list, click “Start” and in the “Search programs and files” search bar, enter the entire word msconfig. As a result of the search, the msconfig.exe program will appear. You launch it.

In the “System Configuration” window, go to the “Startup” tab. This window will contain the entire list for autoloading.

How to set up Windows 7 startup

To set up startup in Windows 7, you must first understand what is meant by setting startup. Some mean automatic start programs and applications when the operating system starts, and others - control loading windows 7 (i.e. how and with what parameters it will start). In the first case, you need to open “get” to the folder or tab with elements and customize everything for yourself. To do this, open the “Startup” folder or launch the system configuration and go to the “Startup” tab.

If you do not find the application you need to disable in the folder, run “System Configuration” via msconfig. You can press the Win+R key combination and type “msconfig” in the input line.

In the window, go to the “Startup” tab and find the application that you want to disable. Just uncheck the application and it will no longer launch. To confirm, do not forget to click “Ok” or “Apply”.

If you want to customize the settings for how Windows 7 will boot, all settings are made in the System Configuration application. Just as described above, launch it via msconfig. And in the tabs we configure the parameters. The first tab - “General” - allows you to choose one of three options for starting the system:

1. Normal startup is the default setting in which the operating system starts in normal mode in the absence of any problems on the part of Windows.
2. Diagnostic startup - when you select this option, Windows will launch only the basic drivers and services that are minimally required at startup. normal operation. Used to identify problems in Windows. If the system works normally in this mode, then you need to look for the problem further and try to start the system in the “Selective startup” mode. If the operating system also does not work in the “Diagnostic startup” mode, it means that the main drivers and files are damaged. You may have to reinstall the OS.
3. Selective launch - allows you to limit the download to one of three parameters or three at once. Allows you to determine which of the system elements is the problem.

In the “Download” tab you can configure detailed settings launch. In area (1) you select the system that will boot by default. This is relevant if you have several systems on one computer. In this window, you can either set the system to boot by default, or remove one of the installed ones from the bootloader (the system is not deleted, but only the ability to boot is removed).

When selected " Safe mode» Windows boots with a minimal set of driver and device services. The key word here is minimal.

In area (3) you can set an additional loading restriction:

• No welcome window
• Keep a download log and write everything to the file %SystemRoot%Ntbtlog.txt
• Basic video activates the minimum VGA mode, which disables the video card driver and loads standard driver VGA
• During the boot process, the names of the drivers that are being loaded are displayed.

In area (4) you can set the time parameter for selecting the operating system at startup. This is the time during which you can choose another operating system instead of the default one.

Additional settings allow you to limit the number of processor cores and memory. You can also block PCI so that the system does not allocate I/O resources. Debugging enables kernel-mode debugging for device driver developers.

The Services tab displays the status of services that are loading. In this window you can see whether a specific service is running or stopped. To disable the service, uncheck the box next to it. You can turn off showing Microsoft services.

And in last tab“Service” contains a list of necessary diagnostic tools, as they say, “in one place.” Access to these tools is possible from the operating system itself, but from different places, but here everything is collected in one for convenience.

Procedure automatic download in Windows 7 OS it is represented by a variety of management functions. Thanks to electronic tools, the OS has the resources to edit the registry format and launch a special startup administration concept. Restrictions on making changes exist only for system folder, hidden inside file system.

Startup folder

In order to find yourself in the folder we need, you need to use a similar section of the device system. IN Windows system 7 the order of actions is as follows: “Start” - “computer” - “local drive C” - “program Data” - “Microsoft” - “Windows” - “Start menu” - “Programs” - “Startup”". When going to system disk C, the “program data” folder may not be displayed. For the sake of its visual accessibility, you need to change the properties of the demonstration invisible folders and files. By pressing the Alt button you need to open the register of permissible actions on at this stage, then select the Tools menu at the top of File Explorer. The next step is to select “Folder Options”. In the configuration window that opens, select “view”, scroll the slider down, and select “additional parameters”, check the box “show” hidden files and folders”, and don’t forget to click “ok” to save the settings.

All applications that should be activated when the computer starts should be placed in the automatic startup folder. To perform this procedure, just copy the widgets of the programs you have selected for autorun and move them to the directory that opens. After the procedure, there is a need to reboot the device. After turning on the computer, you need to check that the adjustments made have been completed.

Msconfig

The Msconfig utility allows you to successfully manage system properties and adjust sections of the startup folder. In order to open a list of objects that are launched when Windows startup, commit next transitions: “Start” - “All Programs” - “Accessories” - “Run”, enter “msconfig” and press “enter”. After clicking on the “Startup” folder, you will see a complete list of them. In order to deactivate the launch of programs, you need to uncheck the boxes next to unnecessary ones in the list, click “ok” and restart the computer. Along with msconfig, there are other programs for managing applications that run with the system, such as CCleaner, AnVir Task Manager and others.

Editing the Registry

You need to edit the registry using the “regedit” command in the “run” subsection. Go to HKEY_LOCAL_MACHINE – SOFTWARE – Microsoft – Windows – CurrentVersion – Run, will allow you to use the list on the left. A list of programs that are activated along with the system will open in the center. You need to select and highlight unnecessary items and restart your computer after making changes. Elements sorted for deletion will no longer be launched at startup.

To get to the startup folder, you will need to use the appropriate partition of the computer's file system. In Windows 7, click on the Start menu - Computer. Select the “Local Disk C:” section, from where go to ProgramData – Microsoft – Windows – Start Menu – Programs – Startup.

If you don't see the ProgramData folder when you go to Local Drive C:, you'll need to change the show hidden files and directories attributes. At the top of the “Explorer” window, click on the “Tools” - “Folder Options” menu, after clicking on the button Alt keyboard to bring up a list of possible operations. A configuration window for displaying files in directories will appear in front of you. Go to the View tab and scroll down to the Advanced Options section. Check the box next to “Show hidden files and folders”, then click “Ok” to apply the changes.

By going to the startup folder, you can place your applications that you want to launch when the system starts. Just copy to this directory shortcuts to programs that should be launched after a reboot. To apply the changes and ensure that the files are placed correctly, restart your computer.

Msconfig

Msconfig - standard in Windows utility, which allows you to manage system settings and change startup partitions. Go to the Start menu - All Programs - Accessories, then click Run. Type msconfig and press Enter. In the window that appears, click on the “Startup” tab. You will see a list of applications that launch along with the system when you turn on the computer. To disable one of the programs, uncheck the unnecessary item, and then click “OK” to save the changes. Restart your computer for these steps to take effect.

In addition to Msconfig, you can use programs such as CCleaner or AnVir Task Manager, which provide advanced tools for managing programs that load with the system.

Editing the Registry

To go to the Registry Editor, run the regedit command in the Run section. Go to the branch HKEY_LOCAL_MACHINE – SOFTWARE – Microsoft – Windows – CurrentVersion – Run, using the list located on the left side of the window. In the center you will be presented with a list of programs that run with the system. Select an unnecessary item and delete it if you do not want the program to start at startup anymore. After applying the changes, reboot.

By completing the steps above, you will have access to the list of startup applications. Here you can remove unnecessary utilities by unchecking the box next to a particular program. The changes should be confirmed with the “Ok” button and the system restarted.

1. Where is startup in Windows 7?

Exist alternative options searching for the startup folder in Windows 7. The user can get to the required directory in the following way:

• Go to the Start menu and search bar enter "shell:startup".
• After confirming the request, the startup folder itself will be opened, in which you can delete and copy new shortcuts.

A more common method for finding startup:

2. Features of startup in Windows 7.

As you know, several users can control a computer, in which case not each of them will be able to get to the required folder if necessary. If the computer owner wants to edit startup for all system participants, the following series of manipulations should be performed:

• Go to the Start menu and go to the search bar.
• In the search form, enter the path “C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup”, then confirm the action.
• The startup folder will become open to all users, it will contain possible removal and insertion of certain shortcuts.

Some users prefer to use a less common method of locating the startup folder. The path to such a folder might look like this:

• After opening the Start menu, go to Computer.
• Selecting a section local disk“C:”, in which you need to go to “ProgramData” - “Microsoft” - “Windows” - “Start Menu” - “Programs” - “Startup.”

It is worth considering that the folder called “ProgramData” may be hidden, then you will need to change the attributes of the hidden files. To do this, while in Explorer, press the “Alt” button, which launches a list of possible operations, and then find the “Service” section and go to folder properties. In the running window of configurations responsible for displaying files in directories, you need to go to the “View” tab and open additional parameters. After checking the box next to the “Show hidden files” item, the “ProgramData” folder, which is necessary for the subsequent opening of startup, will become visible to the user.