The Android fell into the water and does not turn on. The smartphone fell into the water

Useful tips

What to do if your phone falls into water, what needs to be done to save it? A similar question almost always arises unexpectedly when an accident occurs with a mobile device.

Unfortunately, no one is immune from such a nuisance, because they drop their phones not only due to their own clumsiness, but also due to external influences, for example, a push from another person; it happens that the phone gets wet due to heavy rain that a person got caught in, liquid is spilled on the smartphone, etc.

The situation is further aggravated by the effect of water on the electronic parts of the telephone. Because of this, corrosion occurs and there is a risk of short circuit, at which it burns electronic components mobile device.

How to save a phone that has fallen into water? There are some steps you should take to minimize damage from water getting inside your phone. I’ll say right away that even after all the “resuscitation” measures have been carried out, there is no complete confidence that mobile device will work again.

The final result depends on various factors: for example, whether the device was working or turned off, how long the phone was in the water, etc. In some cases, the result of the “rehabilitation” will be successful, everything will work out without breaking the device. A good result: replacing some parts of the phone that have become faulty, for example, replacing the speaker, microphone, etc. In difficult situations, no action will help, if the smartphone fell into the water, the device will turn into a “brick”, the phone, as a communication device, will destroyed.

In this article you will find instructions on what to do if your phone falls into water, how to dry a phone that has fallen into water, and what actions you should not take with a wet phone.

What not to do if your phone falls into water

First, let's look at what you should not do if your mobile device has been exposed to liquid: it has fallen into water, gotten wet in the rain, or some coffee or tea has been spilled on the phone. Wrong user actions can lead to fatal consequences and aggravate an already difficult situation.

You cannot turn on the phone if it has been turned off.
Do not connect a wet phone to an electrical power source: charger connected to the mains.

Ordinary water is a conductor electric current, therefore, due to exposure to liquid, a short circuit may occur, due to which the electronic parts of the mobile device burn out.

Stop using a wet smartphone, and if it is still working, turn off the device.

Do not shake or twirl a mobile device that has fallen into water. Due to chaotic movements of the user's hands, liquid can penetrate into those parts of the phone where there is no water yet. Therefore, to prevent water from getting inside the smartphone, the device should be fixed in one position.

Do not disassemble the phone unless you have experience disassembling this device.

If disassembled incorrectly, parts of the device may be physically damaged. For an inexperienced user Simply remove the back cover and then remove the removable parts from the phone.

Do not use a hairdryer or heater to dry a wet phone.

Due to excessive heating, the electronic parts of the smartphone may fail, so it may happen that the gadget becomes faulty due to incorrect user actions, and not due to exposure to liquid. In addition, the hair dryer can blow moisture located on the surface of the phone further into the device.

Carrying out rescue activities with a wet phone

If you have a problem with a wet mobile phone, follow a number of required steps. The sooner the smartphone is freed from direct exposure to liquid, the greater the chance of recovery of the device.

The very first thing that needs to be done as quickly as possible is to prevent external influence liquids on the phone. Remove the wet device from the water and move it to a dry place.
Turn off your phone if it was turned on. Do not turn on your mobile device if it has been turned off.
Remove the cover from the device, remove it from the phone battery to prevent short circuit.
Remove the SIM card and SD card from your mobile device. Disconnect other peripheral devices connected to the smartphone.

The battery can be removed from the switched on device, this must be done as quickly as possible to de-energize the device due to the risk of a short circuit. Removing the battery in a timely manner will increase the chances that the electronic components of the smartphone will not be damaged.

Quickly removing the SIM card and memory card will preserve the functionality of these devices and save the information stored on them. Make sure that the parts removed from the phone are dry. If necessary, carefully wipe the removed elements with a napkin or dry towel. Do not use the SIM card and memory card until they are completely dry.

Remove protective films, cases that can cover cracks and gaps on the device, and prevent liquid from leaking from the internal areas of the phone, preventing the phone from drying.

Secure the phone in an upright position to prevent moisture from entering the still dry areas of the device.
Wipe the connectors, contacts, and other external parts of the smartphone with a napkin or soft cloth to remove moisture so that they do not suffer from the aggressive effects of the liquid.

How to dry a phone that has fallen into water

After all the preparations have been made, you should dry your smartphone to remove moisture from the device. There are 4 ways to dry your phone:

evaporation of moisture from the device naturally;
drying the phone with alcohol;
removing moisture from the device using an absorbent;
extracting water from the phone using a vacuum cleaner.

Use one of these methods, depending on whether you have this moment the ability to use one or another method to remove liquid from a mobile device.

Natural evaporation of liquid from the phone

First the method will work with slight moisture ingress. Place your smartphone in a dry place, preferably in a sunny place, and wait until the water has completely evaporated from the device.

After some time, the water will dry and the device can be checked for functionality. First, make sure that the water has completely evaporated from all holes and crevices. Don’t rush to turn on your phone; it’s better to wait longer than to pay for being too impatient later.

Cleaning your phone with alcohol

In case of minor liquid contact with the phone, treating the smartphone with alcohol is suitable as a measure to remove moisture. The fact is that alcohol evaporates moisture. Therefore, treating the surfaces of your mobile device with a cotton swab lubricated with alcohol will help get rid of any liquid that has gotten into the phone.

Removing water from your phone using rice

This option involves the use of an absorbent, a substance that absorbs moisture well. The easiest way to use rice grains is as an absorbent. Rice absorbs moisture very well, so it is suitable, in our case, for absorbing moisture from the phone. This is a common product and easy to use.

Fill a suitable container with dry rice and then carefully place the wet phone in it. A plastic container or glass jar is suitable for this. Place your phone battery in the rice.

Keep the phone in rice cereal for at least two days. Monitor the drying process; if necessary, replace the cereal by adding a new portion of dry rice. Turn the device over from time to time to ensure more efficient absorption of moisture by the absorbent. If necessary, wipe the phone with a tissue or blow off the mobile device with a vacuum cleaner.

Evaporate moisture from your phone using silica gel

Another option: you can use silica gel as an absorbent, which you find in bags found in shoe boxes when you buy new shoes. Silicate gel balls are good at sucking moisture from the surrounding surface. It is a more effective absorbent than rice cereal.

Place your phone in a jar of silica gel. The process of sucking out the remaining liquid from the mobile device will take at least 10 hours.

Removing water from your phone using a vacuum cleaner

You can use quite effective way to remove liquid from the phone using a vacuum cleaner. The vacuum cleaner sucks water out of a wet smartphone well.

Place the narrowest attachment on the vacuum cleaner hose and carefully move the hose over the device. Do not touch the surface of the phone to avoid mechanical damage to the device and to prevent static electricity. Blow on the phone from all sides for some time, about 20 minutes.

Turning on the phone after drying

If the phone is completely dry and there are no signs of moisture on the device, try turning it on. You should not rush to turn on your smartphone ahead of time.

If there is a slight ingress of moisture, at least a day should pass from the moment the water removal measures begin. In other cases, it is better to wait two to three days before starting the device.

Carefully inspect the device, visually check the contacts for oxidation. Insert the battery into the phone and then turn on the device. Observe the phone's reaction as it turns on: it starts up normally or makes some sounds.

If the phone starts in normal mode, insert the SIM card, check the operation of other functions of the smartphone. Based on the test results, it may be necessary to replace some parts of the phone.

If the phone fails to start, the device must be taken to a service center or repair shop mobile technology. Unfortunately, this is not an insured event; the smartphone warranty will not help.

Based on the results of checking the device by a specialist, you will find out whether it is possible to restore the phone’s functionality after a breakdown, or whether nothing can be done.

Conclusions of the article

If the phone falls into water or is doused with liquid, it is necessary to protect the mobile device from exposure to water as soon as possible, and then immediately turn off the power to the wet device. Next, you should quickly remove the liquid from the device using different ways, and then you need to leave the phone to dry from any remaining moisture. The process of removing moisture will take some time; the smartphone cannot be turned on until the water trapped inside the device has completely evaporated.

Methods for drying and repairing a phone after falling into water.

Most often, mobile phones that have been dropped or damaged are brought in for repair. mechanical damage. Among the faulty devices there are many “drowned people”. Often the phone falls into the washbasin or toilet. But sometimes one cup of tea is enough to break it. In this article we will tell you how to resuscitate a “drowned man”.

No one will give a guarantee, even in service center They won’t tell you with a 100% guarantee whether the phone will work. It all depends on how long the device was in the water and how quickly you dried it. Water usually penetrates deep through the holes for the headphones and the charging connector. The likelihood of resuscitation of the device increases if you immediately disassemble the device and dry it.

Many people try to dry their device with a hairdryer, but this is an ineffective method of dealing with moisture.

Instructions for saving your phone:

Remove it from the water immediately. Remove back panel and remove the battery
Some modern models sold with a screwed lid. In this case, the likelihood of saving the device is reduced.
Unscrew the screws and remove the back panel, remove the battery, all cards
Use a dry, lint-free cloth to blot everything inside; the battery should also be wiped
Leave all parts of the device on dry cloths and let dry completely
Don't even think about turning on the gadget. Allow 2 days to dry completely
After that, assemble the phone and turn it on

What to do if you fall into water Xiaomi phone, Samsung, Lenovo, Asus, Zte, Sony, iPhone, Android?

This is the simplest option, but not the most successful. The fact is that warm water accelerates metal corrosion, so all contacts will oxidize faster. But you can still disassemble the phone, wipe it with a dry cloth and put it on the battery overnight. In the morning, assemble the device and try to turn it on.

Rice is an excellent adsorbent that absorbs moisture well. With its help, you can dry the device, while moisture is absorbed even from hard-to-reach places.

Instructions:

Remove the phone from the water and quickly remove the cover
Remove the battery, add dry rice to a bowl
Immerse the device and battery in rice. Cover everything with cereal
Leave the gadget to dry in rice for 2 days
After 2 days, try to assemble and turn on the device

This does not mean that the phone is broken. Often during an outage the battery will drain within 3 days. After this it will hardly be possible to charge it. Many Chinese phones Sold with two batteries. Try making a replacement. Often the problem is oxidation of the USB connector through which the device is charged. In this case, you can resolder the connector itself. But you are unlikely to cope on your own, so contact a service center.

Why doesn't the screen or sensor of a phone that fell into water turn on?

The phone may turn on after falling into water, but the screen does not respond to touch or does not light up at all. In this case, moisture has entered the screen. It is also possible to close the contacts in the screen. Perhaps the service center will be able to repair the contacts and dry the screen. But often you have to change the entire screen.

If only this happened to your gadget after falling into water, then consider yourself lucky. This is a simple and inexpensive breakdown. The speaker is a hole through which moisture enters. The service center will quickly replace the speaker. You won't be able to fix it yourself.

It all depends on the quality and cost of the phone. IN Chinese copies, which are “clones” of well-known manufacturers, have built-in cheap cameras. It is almost impossible to repair them due to the complexity of soldering the cables. Sometimes it is not possible to make a replacement, since cameras that are identical in appearance can differ significantly. In this case, you will have to use only the front camera.

In known devices, the camera will have to be replaced. This will hit your wallet, as spare parts for famous phones They're not cheap. But perhaps everything can be done by cleaning the contacts, and the camera will not have to be changed.

First, try cleaning the microphone hole. This is done with a toothpick or needle. But if you do not have experience, we do not recommend doing such repairs. You risk puncturing the microphone. In this case, the part will need to be replaced. This repair is also inexpensive, so consider yourself lucky.

Under no circumstances should you dry your phone using a hairdryer or microwave; overheating will negatively affect the serviceability of the device. You should not immediately try to turn on the device. It needs to be completely disassembled and removed. SIM card and a memory card. Place the device itself with the battery in rice for a day. Only after this assemble and try to turn it on. If the gadget does not respond, do not be upset, take it for repair. After cleaning the contacts, most devices work fine.

You should not try to deceive the seller and say that the device broke down on its own. Each phone has an indicator that changes color when it comes into contact with water. Therefore, any technician will see that the phone is wet. Unfortunately, this is not a warranty case, so you will have to pay for the repair yourself.

As you can see, it is quite difficult to guarantee that the phone will work after drowning. If you reacted in time, disassembled and dried the device, then there is a chance to save the gadget.

VIDEO: Drying a “drowned man’s” phone

Six simple steps to save your device.

Accidentally dropped your smartphone into a sink or pond, left your phone in your jeans while they were going to be washed, or spilled juice, tea or coffee on your phone? This can happen to anyone at least once, and not all phones are protected from moisture, such as Samsung Galaxy S7, Apple iPhone 7 or Sony Xperia Z3 Compact. Spilled liquid is dangerous due to both short circuit and corrosion of the smartphone. If the correct measures are not taken in time, a smartphone that has been in water will experience a complete or partial malfunction. The site’s team of experts has tried all known methods of solving the problem and offers simple steps to save your phone.

1. Get your phone out of the water

The very first thing you need to do if your phone falls into water is to pull the device out of the water as quickly as possible (if you spilled liquid on it, go to step 2 of these instructions). Seconds can count - liquid can easily leak and penetrate into the phone case if it is not protected from water. However, if your phone is being charged from the network at this moment, then under no circumstances touch the device and the charger! It may be dangerous! First, turn off the power to the outlet, and only then remove the phone from the water.

How longer phone is in water, the less chance of a favorable outcome. Even if the cover and case elements fit tightly together, water can freely penetrate to the chips, for example, through ports and connectors for charging and headphones, or openings in speakers and microphones. But even if the phone has been in contact with water for a long time, you still have a chance to save the device.

2. Remove the battery, SIM card and memory card

Free the phone from the case (if there is one), remove the cover of the device and remove the battery from the phone case (if the case is collapsible and the battery is removable) so that the chips on the board do not oxidize. Next, take out a SIM card and a memory card - contacts and data on them are sometimes more valuable than the smartphone itself.

Do not turn on your phone under any circumstances. It is better not to press any buttons or keys again, as this may cause the water to go even further into the body. If any peripheral devices were connected to the smartphone, then disconnect them; if the ports are covered with plugs, then leave them open for ventilation.

3. Wipe your phone

Thoroughly wipe down your smartphone and anything you took out of the phone. A dry, absorbent rag or towel is suitable for this. Carefully remove every drop from the surfaces accessible to you (depending on whether your phone has a collapsible case or not), because even one remaining drop can destroy the phone. Be careful not to leave pieces of paper or fabric inside the cabinet, in corners, or in crevices. If there is still water inside the device, you can try to gently “shake” the liquid out of it. However, you should not get carried away and do it with force - there is a risk that water may penetrate even deeper into the device.

4. Disassemble your smartphone

As a rule, it is enough to get by with the cover removed and the battery removed. However, if you believe in your abilities and have experience, then disassemble the phone into the smallest possible individual parts. This is done so that the air (or absorbent substance) has a large contact area for good circulation and drying.

It is worth considering that in this case you will lose the warranty, but most often the warranty on a smartphone does not cover cases of “swimming” in water, so in this regard you will not lose much. We advise you to record or photograph the disassembly process step by step, this will help you quickly and correctly reassemble the device after drying. After you have disassembled the phone, repeat the steps from the previous paragraph.

If you spill juice, tea, coffee, wine or beer on your phone, be sure to wash the stains with distilled water or alcohol so that there are no traces left that can then dry out. These drinks contain a lot chemical elements, which, remaining on the surface of the device elements, destroy them, so they must be removed. If this is not done, then your device will die at the most unexpected moment, taking with it valuable information to the “other world”.

5. Dry your phone

Now all that remains is to dry the smartphone. There is an opinion that it is best to dry your phone with a hairdryer, but we do not recommend resorting to this method. If there is moisture left somewhere, the hairdryer can send it even deeper into the case, which can only “finish off” the phone. Also, do not dry the device in the oven or microwave. For such situations, a vacuum cleaner with narrow attachments is more suitable.

If you don’t have a vacuum cleaner at hand and, at your own peril and risk, decide to use a hairdryer, then turn on the warm stream not much warmer than room temperature and keep your distance (distance to parts). A vacuum cleaner, on the contrary, will draw out moisture. You need to bring it with a narrow nozzle to each of the holes and gaps and hold it for a few minutes. Just in case, make sure that everything is securely fastened and will not go inside the vacuum cleaner (especially if you disassembled the smartphone).

You can also dry electronics in rice, but it is preferable to use silica gel. You can also simply dry the components in a dry room on plain paper for about one and a half to two days. The disadvantage of silica gel and rice is that they themselves quickly become saturated with moisture and over time the rate of moisture absorption decreases. You will have to turn your smartphone or replace the absorbent every couple of hours, so air drying is much easier.

By the way, if you use substances that draw out moisture, it is better to put them with the phone in a small sealed package.

6. Assemble and turn on

After one and a half to two days, you can assemble and turn on the device. First, check your phone to make sure all connectors and parts are dry and clean. If yes, then you can assemble the device. If you have not disassembled the phone in detail, then simply insert the battery. Try turning on your smartphone with or without a battery, but from the mains. There could be several scenarios here. If in both cases mobile phone turns on, then make sure everything is working properly. If not, but the computer responds to it via a USB cable, or the phone turns on or responds to charging from the network, then perhaps this will help new battery. If in both cases nothing works, then you should contact the service center. It may often happen that the phone starts, but does not work correctly; in such cases, you can repeat the above steps (there is probably still liquid left somewhere) or take it to a service center for repairs and tell them that the phone was in water and that you they did to him. Please note that even if the smartphone turns on or works after replacing the battery, a corrosion process may begin inside your device, which will act like a time bomb and “kill” it at the most unexpected moment. It can take quite a long time, and only a service center can help you deal with it by treating the board with an anti-corrosion solution.

By following these simple instructions, you can try to save and revive your phone. However, remember that there is simply no 100% guarantee in such cases. To protect yourself from such situations, you can buy special waterproof covers or follow simple measures precautions. Take care of your gadgets!

Let us remind you that on our website you can view the results of smartphone tests. Our experts checked the quality popular models in the laboratory and based on the test results, they compiled a rating of smartphones.

Do you want to understand others? important issues? Read

When most of us come to the sea, lake or just a public swimming pool, we take our phone/smartphone and other electronic equipment with us.

A slight splash of water is usually not a serious problem for him, but sometimes it happens that our “ward” likes to fall into the water and stays there for a long time and this at the least expected moments.

What to do? It can usually be saved, although not always, especially if you do something wrong during the rehabilitation period.

The worst thing is if a Lenovo, Samsung Galaxy, HTC, Asus, Nokia, Huawei or iPhone phone falls into the water and does not turn on. If, for example, only the sensor, camera, microphone, speaker, etc., so to speak, only one element does not work, and it is also charging, then naturally there are more chances.

If it doesn’t turn on at all, as was the case with my Samsung and I didn’t take action right away, then the situation can be tragic.

I did not take action because I did not know that water had gotten into the smartphone. It didn’t fall into the water - I just walked around in the rain for a bit, then when I got home I put it in its usual place and picked it up only the next day.

This was enough to prevent my Samsung with Android OS from turning on. Then I made another mistake, although I knew about it firsthand.

However, I have an excuse, because I didn’t know that water got into the phone and thought that the battery was just dead.

Naturally, I connected the charger, which was impossible to do, although perhaps it was already dead.

In a word, my Samsung smartphone not only never turned on again, it was also beyond repair.

What to do when your phone falls into water and does not turn on

As you know, water and telephones ( electronic devices) never go hand in hand and in this unequal battle the phone may no longer turn on.

There is no 100% guarantee that after swimming you will be able to restore the device to full physical readiness, but your quick action may be decisive.

The main thing is to pick up the phone from the water as soon as possible. The sooner this is done, the less water will get inside the device and the less chance of “destruction”.

The next step is to immediately remove the battery (if, of course, the phone design allows it).

Short circuit is the most common cause of equipment failure.

So you can't waste time turning off your phone - which can take a few seconds - get rid of back cover and remove the battery quickly.

The situation is different when the phone is built in one piece (the battery is not removable). Then the battery cannot be quickly removed and we can only rush to take the phone to the service center.

However, devices such as Xperia Z, Galaxy S4 or S5, Xcover 3 or even Galaxy flagship S7 are considered more “advanced”, have the appropriate durability certificates and are generally waterproof (resistant to full immersion into the water for certain period time).

If your mobile phone is turned off, it is tempting to try to turn it on to check - don't do this.

On the contrary, remove the SIM card and memory card. They store your personal data and you may lose it.

Therefore, removing them should come second after removing the battery. Then open up all the nooks and crannies you can - like the cover that covers the card slot MicroSD memory or USB port.

The next step is to thoroughly clean and dry the device. You can use a towel, cloth, or similar things that quickly absorb water.

The more water you can remove from your phone, the better. If your smartphone gets drunk on sugary drinks, you should clean it before drying it, for example, with isopropyl alcohol.

The sticky residue can be harmful to equipment, but isopropyl alcohol is harmless and electronics will not create electrolysis.

Avoid paper towels because as you clean, they get wet and the residue can get stuck in the phone's grooves.

Do not use a dryer under any circumstances! The flow of hot air can remove water from the phone's outer surface, but it can also push it further into the case.

There is one good way. To dry your phone, place it in a dry container with silica gel, which helps remove excess moisture.

Small packages are found in a shoe box - these little bags have balls in the middle and quickly absorb moisture.

If you don’t have this at home, you can use raw rice for drying, which also absorbs moisture well.

After cleaning, place the phone in a dry and safe place for ten or several tens of hours.

It is best to turn on the phone only after at least 24 hours have passed, or even better, 48.

If the phone does not turn on, try starting it by connecting the charger.

It can sometimes take up to a week for a smartphone to recover from the shock.

I never do if the phone falls into water and does not turn on

Do not put your phone in the microwave or dry it with a hair dryer.

A smartphone contains a number of sensitive parts that heat can destroy.

Very high temperatures may damage the equipment.

Do not use products containing alcohol for drying. Alcohol can damage sensitive areas of the phone (such as gaskets).

Don't lie to the seller. The phones have litmus stickers and when wet they change color. Therefore there is no point in lying.

I hope this guide will help you save your phone after close contact with water.

Let me know if you've ever had situations where your phone got submerged in water and wouldn't turn on.

Were you able to save him? Maybe you have your own special drying methods? Good luck.

Most often, water threatens a mobile phone in the form of rain. We've all had to talk on the phone in the rain on more than one occasion. If there is light precipitation, most likely there is no threat to the handset, but if you are caught in a downpour, it is better not to use the phone and put it away altogether. Unless, of course, you're under an umbrella.

However, much more dangerous for a mobile phone are cases when it is not water that gets on them, but they themselves suddenly fall into the water. There are common cases when the phone is dropped into a puddle, into a sink, sometimes even into a toilet. And some even manage to send their device to the washing machine, wash and dry there. It also happens that the phone falls into a glass of tea or something else.

What to do if the phone does drown? We offer step by step instructions, which can help you rehabilitate your device if it has been in water.

Get your phone out of the water quickly! It is worth considering that your chances of saving a drowning mobile phone decrease with every second the device spends under water. So get him out of there immediately.

Turn off your phone. Unless, of course, it turned itself off when dropped and has not yet stopped functioning in water, turn it off immediately. Don’t rush to be happy that the phone works when you pulled it out - this does not mean that the fall into the water passed without a trace. Some conclusions can only be drawn after a certain time has passed. So be sure to turn it off.

Disassemble the phone. In particular, you need to remove the battery and generally disassemble the phone into as many parts as you can without breaking it. The first thing you need to do is remove the battery, because a wet phone is at risk of short circuiting. This task may not be possible for those who have a phone with a non-removable battery. If you know how to disassemble and assemble a phone, wipe its “filling” with a dry cloth. Lay out the parts on a napkin and dry, or with a hairdryer.

Take out the SIM card. Water can damage not only the phone itself, but also the SIM card. The longer it is in contact with water, the greater the risk to it. The SIM card, of course, can be restored, but sometimes users also store useful contacts. If they are there, even if the device fails, saving the SIM card will at least eliminate the problem of restoring the contact list.

Dry your phone. There is no need to try to turn it on before it is completely dry. So be patient, quick in in this case will not lead to anything good. We advise you to wait at least a day, or better yet several days, because the moisture inside remains for a long time. By the way, there is little point in drying the phone under a hair dryer if it is not disassembled: the hair dryer will not dry the inside of the device anyway.

Dip your cell phone in alcohol. This advice is folk, but useful. Alcohol does not harm microcircuits and delicate connections, in addition, it absorbs water. Immersing your phone in alcohol will draw out the water from it, leaving the parts intact. They say this is why mobile phones more often survive in vodka than in water. True, we will not undertake to say that alcohol can be replaced with vodka to save the phone. And, by the way, do not forget to disconnect the battery before immersing in alcohol.

Place your cell phone in the rice. They say that an unassembled phone, but with the battery disconnected, can be dried in a container of rice for several days. It absorbs moisture well, which speeds up the drying process of the phone.

Take your phone for repair. After drying, you can, of course, try to turn on the device, and perhaps it will work without problems. But if you want to play it safe, take your cell phone to a repair shop. If you have a phone non-removable battery, it must be taken in for repair. Repair can also be useful in cases where you tried to turn on the device and were convinced that it did not work.

If you drown your phone, consumer protection laws are not on your side. Even if the device is new and the warranty period has not yet expired, the case is still not covered by warranty, and you will have to repair the device only at your own expense.

In some cases, the degree of damage is such that it is easier to buy new phone than to restore a sunken apparatus. Especially it concerns inexpensive models. The most unpleasant thing in such cases is the loss of contacts, saved photos and other information valuable to the user. If you can't fix the phone, then nothing can be done.

But don’t be upset anyway: contacts are a valuable thing, you’ll still take photos. If the phone could not be saved, you can throw it away or give it to a child as a toy. Finally, you can give your device a crash test: after all, you have always been interested in how impact resistant it is, but somehow you didn’t want to check it. If you don't have the money to buy a new phone right away, ask someone to give you their old device to stay in touch. Someone will definitely have it, because according to statistics, almost half of mobile phone owners have at least two of them.