The volume button is stuck. Volume button on phone gets stuck

Youtube

If you are the proud owner of a Xiaomi smartphone and one day the lock and volume down keys stop working, do not rush to take it to the service center. This article will most likely help you get your phone back to working order.

Probable Causes

Depending on the circumstances, the causes of this problem may vary.

If you have been using your phone for a long time, it is possible that the problem is in the contacts that have oxidized over time. But then, most likely, the buttons would not stop working at the same time.

Another reason is water ingress. But these are mechanical failures and you would probably determine that this is the problem.

Therefore, discarding the first two options, we can assume that the buttons stopped working due to a system failure. The fact is that the keys can be blocked by the power controller after the battery is completely discharged.

We will treat the smartphone by rebooting. But how to do this if the lock button does not work, which, when pressed for a long time, launches the shutdown/reboot dialog. Another problem may be unlocking your phone. If you are reading this article, you have probably found a way to unlock your phone, for example, using a fingerprint sensor. Therefore, we will not dwell on this issue.

How to reboot a Xiaomi smartphone without a button?

Try all the options with special reboot applications from the Play Store, and you will come to the conclusion that half require root, and the other half simply does not work. There is no other way to start the shutdown/reboot dialog.

Fortunately, MIUI has a feature that requires a reboot when activated. Go to Settings -> Light Mode. Let's activate it.

After this, the phone will reboot and the functionality of the buttons will be restored. At the same time, the interface will change to the “for parents” option; you can return everything back using the same menu item.

A smartphone is a multifunctional device, and its versatility is based on many factors. One of them is the volume buttons, the capabilities of which, apart from their basic functions for working with sound, few people know about. In this article we will analyze all the functionality of the volume rocker and determine how useful they are.

Photo

Today, almost every smartphone comes standard with the ability to capture pictures using the smartphone's volume buttons. However, if the manufacturer decides to limit the functionality of the firmware, there is a solution in the form of various third-party programs, one of which is QuickClick.
The program works similarly in the case of video recording.

Turn on the flashlight

Again, with QuickClick, you can turn the flashlight on or off with a simple press of the volume button. It is worth noting that today most devices support this function initially, in particular we are talking about new gadgets on the latest 5.x.x.

Open applications

QuickClick will also allow you to open third-party applications by pressing the volume buttons. You can select the applications you are interested in in the QC settings. An excellent opportunity for those who, for example, often visit the VKontakte application or Android World - AndroidInsider.

Play music

The same application will allow you to listen to music.
The usual method works in the following way:

You unlock your smartphone;

Open the music player;

Choose a track.

However, with QuickClick, just press the volume button and your favorite track will fill the room with interesting shades.

Emergency situations

If you are stuck in an elevator or have forgotten your keys at home and the door is slammed shut by a blast of air, the only solution is to call emergency services. However, it also happens that at such moments there is no time to unlock the gadget, go to contacts and search for the desired number. The optimal solution would be to set the volume button to automatically dial emergency services using QC. By the way, you can choose any contact. For example, if you chat with a friend often, it might be a good idea to add their contact to your volume rocker actions.

Lock button

Lock button not working? No problem. You can also unlock the gadget using the volume buttons. To do this, you will need the Volume Unlock Button Fix application, which will save you from going to the service center for the help of specialists who demand a considerable amount from clients for the services provided.

Safety

Thanks to the next app, Oops! AppLock, you can block access to certain applications.
When launching the application, the user needs to understand how to unlock the gadget, because the unlocking principle lies in the algorithm for pressing the volume buttons. For example: the sequence of pressing Up - Up - Up. By the way, according to the standard, this is exactly the sequence. The application itself is hidden under regular notes; to go to the program itself, you need to press the Volume Up button three times in the Note application.

Scroll web pages

If you use UC Browser, assigning web page scrolling to the volume buttons is not difficult, because this function is built into this browser natively. But in the case of Chrome, you will need Root rights.

If they are still available, you need to download Xposed, go to the “Download” section and find the XUpDown module, installing which you need to go to it and select Chrome.

Screenshot

This is the second most popular function of the volume buttons (the standard volume up/down function comes first). In order to take a screenshot of the screen, you need to simultaneously press the volume buttons “Up” and “Down”. The feature works on any Android device.

First of all, it is necessary to say a few words about why attaching additional functions to the hardware keys of a smartphone. The fact is that this is perhaps the only way to perform any action you need without looking at your gadget, that is, by touch or even in your pocket. In addition, there are several actions, such as controlling the cursor on the screen, that are more convenient to perform this way. Below you will find a list of such operations. Please note that some of them will require you to have superuser rights.

Launch the applications you need

QuickClick is a multifunctional utility that is designed to quickly launch applications using the volume keys. In this case, you can use different programs for different sequences of clicks. For example, two presses on the volume rocker will launch the camera, and three presses will launch the flashlight. An important advantage of QuickClick is that it is one of the few programs that does not require root to function.

Wake up your smartphone

This utility will be a real lifeline for those users whose power button is broken or is located on the case so inconveniently that it is difficult for you to use it. The Power Button to Volume Button program is extremely simple and performs only one function: it allows you to wake up the device by pressing the volume rocker. But it is free and does not contain advertising.

Scrolling long pages

In some book readers, scrolling pages using the volume buttons works by default. If you have already gotten used to this wonderful feature and want to use it in other programs, for example in a browser, then for this you will need to install a special Xposed module called XUpDown. What is Xposed and how to make friends with it, you can read in.

Switching tracks

This is one of the most requested hardware button features that will allow you to switch your music player to play the next or previous song. This feature is implemented in several programs, but we recommend that you choose Xposed Additions. Besides music control, this module for Xposed has several additional features that you may find useful. You can read more about Xposed Additions.

Controlling cursor position

This option is useful for those users who work on documents. With its help, you can specify the position of the cursor when entering text much more accurately than poking your fingers on the screen. To activate this feature, we need another multifunctional Xposed module called XBlast Tools. In its depths you will find a huge number of options, but in the context of this article we are only interested in the “Volume Key Tweaks” section. Here you can link the cursor movement to pressing the volume rocker and set its direction.

Secret video recording

Sometimes you may find yourself witnessing a situation that needs to be captured on video, but without anyone noticing. For example, you have witnessed a crime and do not want to attract attention to yourself by blatant filming, or you are interviewing a person who is embarrassed in front of the camera lens. In this case, install the Secret Video Recorder program, which can record video according to your presses on the volume buttons. The device screen will be turned off, and nothing will reveal the fact that recording is currently in progress.

Secret smartphone unlocking

If you want to protect the contents of your device from unauthorized access, you should set an unlock password. However, this password can be seen by strangers when you use the gadget in their presence. An interesting and unexpected solution to this problem comes from the Xposed module Sequence Unlock. With it, you can set a special sequence of presses on the volume buttons, which will unlock the device. For example, three presses on the increase button, followed by one on the volume down button. It is very difficult to peep and record the movements of your finger, and the utility disables the standard unlocking method via the power button.

If the volume button on your iPhone does not work (for example, it gets stuck), do not rush to take your phone to a service center. Before finding out the cost of repairs and paying for replacement buttons (switching to silent mode or adjusting the volume), find out the cause of the problem and try to fix it yourself.

Main causes of malfunctions

Initial diagnostics of the device can be done at home. If the volume button on the iPhone does not work - you do not hear a characteristic click, you feel that the mechanism is loose - most likely the reason is mechanical damage. Shocks and falls easily damage cables, screen, system board and other buttons (volume, lock, iPhone on and off, switching to silent mode). Often, the smartphone not only does not switch to silent mode, but even stops turning on altogether after strong mechanical impact.

Often problems with iPhone occur due to liquid spillage. Penetration of moisture into the housing leads to serious consequences. It is important to dry the phone in time, clean the contacts and tracks, and prevent corrosion, otherwise there may be problems not only with the sound.

The “Volume” (decrease and increase volume), “Power” (turn on and off) and “Mute” (mute, switch to silent mode) buttons do not always break. In some cases, they stop working due to software glitches. For example, when you install unlicensed software on your iPhone or the firmware does not work correctly.

Signs of trouble:

the button is broken and does not respond
Volume control (decrease, increase) does not work
the button gets stuck and works irregularly

If you are sure that the buttons do not work due to a manufacturing defect, immediately contact your Apple retailer or an authorized service center. In another situation, try to solve the iPhone problem yourself.

Troubleshooting software and adjusting settings

When diagnosing the device, you should pay attention to the iPhone settings - the phone may be operating in silent mode. There is also a possibility that a recently installed application is causing the blocking. Then you should do a hard reboot:

press “Power” and “Home” at the same time (on the iPhone 7 this is how the on/off and volume buttons work, if the latter is not broken)
hold them until the phone turns off and the Apple logo appears

As a last resort, go through the iOS recovery procedure through iTunes.

Where to go for repairs

Contact a specialist immediately if the software is working properly, but the mechanism for adjusting or turning on the silent mode has stopped working due to mechanical damage or flooding. When the warranty period is violated, there is no need to waste time on a trip to the service center - it is much more convenient to call a specialist to your home.

Have the volume buttons stopped working on your iPhone? This type of problem causes a lot of inconvenience when using the device. Below are detailed descriptions of the volume key repair processes.

Possible causes of failure

Dirty keys are a trivial, but most common reason. Over a long period of use of the phone, fine particles, dust, etc. may get into the holes between the keys and the case. Due to contamination, the keys work, but are pressed only 2-3 times. To clean the buttons, it is better to use an alcohol solution and a cotton swab;

The button may not work correctly after replacing the top cable of the system board. This is explained by inaccurate connection of the cable (the volume up/down contacts could short out). In this case, only replacing the keys will help;
Virus software that interferes with the operation of certain functions of the operating system;
If a malfunction occurs after an iPhone is hit or dropped, this requires replacing the volume increase mechanism;
Presence of liquid in the body;
Crash after OS update.

The key is pressed, but the sound is not adjusted

If, after pressing the volume control, a ringer window appears on the screen, but there is no volume level indicator at the bottom, the problem is not a failure of the mechanism, but a failure of the operating system.

First, try to fix the software problem in the simplest way - reboot your phone (soft reset). As a rule, this procedure allows you to eliminate third-party processes that interfere with the operation of standard iPhone components. If nothing has changed after rebooting, try pressing both parts of the volume key at the same time. Repeat the action 3-5 times. This may help restore normal operation.

Check for available updates. A new build of configuration parameters solves the problem in 90% of cases. Also try resetting your phone to factory settings.

While the key mechanism is not replaced, you can use the Assistive Touch function with which the desired button will appear on the desktop screen. To enable the option, go to Settings - General - Assistive Touch and move the slider to the “Enabled” position.

Replacing the volume control keys

Did all the above methods not help? In this case, we can say that the iPhone volume button does not work due to a breakdown of the mechanism or due to shorted contacts. Replacing a key is quite simple and you can do it yourself by following the instructions:

Prepare tools for disassembling the iPhone (a set of screwdrivers, a plastic spatula, tweezers, a suction cup, a new volume increase mechanism);
Open your device. Then remove the back cover from the display. Remove the Phillips screws shown in the figure from the battery connector plug. Disconnect the battery cable and remove the battery;

Find the volume control cable and remove its plug by unscrewing the screws shown in the figure:

Disconnect the top cable bracket from the phone;
Unscrew the screws with the bracket contacts;
Remove the contact holder;

Lift the volume control cable connector with a flat spudger;
Remove the following screws:

Remove the button switch mechanism using tweezers. At this stage, you can try to clean the component; perhaps it is not broken, but simply clogged;
To replace the keys, carefully remove them with tweezers. This tool prevents damage to the button membrane;

Replace components and reassemble the device to its original condition.

You can find any instructions for self-repairing an iPhone on our website, or call a specialist for to any place convenient for you.

The iPhone is one of the most reliable phones of our time, but even it can break. You may notice that switching to silent mode and back will happen every once in a while. Or even the Mute switch will move without resistance, and mode switching will not occur at all.

In this case, normal use of the iPhone will be difficult: if the call sound is turned off, you may miss an important call, and the inability to turn on silent mode can lead to an unpleasant situation due to a loud ringing during a meeting or other official event.

Why doesn't the mode switch button work?

There are several possible failure options:

button malfunction;
loop malfunction;
vibration motor malfunction;
electronics malfunction.

The simplest option is a faulty button. It can malfunction due to dust or liquid ingress, as well as due to normal mechanical wear. In the first case, it is enough to rinse and clean the button, but in the second, it will need to be replaced.

It's more difficult to deal with the loop. On the one hand, the breakdown may be simple (lost or oxidized contacts), but on the other hand, the conductor inside the loop may break.

A vibration motor malfunction is rare, but it can also fail due to liquid getting inside or due to an impact from a fall. The vibration mode will not work. In this case, the vibration motor must be replaced with a new one. But the most difficult is considered to be a burnt microcircuit. If it is easy to replace a button or cable, then the microcircuit will have to be unsoldered.

How can I fix the Mute switch?

In simple cases, you can fix the problem like this: disassemble the iPhone, wash the contacts of the button and cable, if necessary, order a new spare part and replace it.

But to perform this work, you need to have at least basic experience working with complex equipment, otherwise you can simply break the latches or even order a spare part from a different model. There is also a risk of buying a non-original part with a short service life. Well, replacing a microcircuit will require the use of a soldering station, so this operation is not carried out at home.

Therefore, it is better to turn to professionals, such as the employees of our Total Apple service center. We can repair any Apple gadget. At the same time, we use exclusively original spare parts, therefore we provide a maximum warranty period (3 years) for both parts and labor.

Hi all! What does a person do immediately after buying an iPhone? That's right, he begins to study him closely. Scratches? Cracks? Gaps? All this is sought with enviable, sometimes even some kind of manic-paranoid persistence. Is this strange? I don't think so. After all, when buying a fairly expensive device, we have the right to expect that everything in it will be perfect.

And at the time of such research, you can easily discover the fact that the mechanical power (volume) buttons are not installed tightly and shake a little. On the one hand, this is frustrating. On the other hand, maybe it’s like this for everyone? Let's figure out whether the play of the Power and volume up (decrease) buttons is a defect or is this a common design feature of the iPhone?

One two Three. Let's go! :)

Personal experience or are the buttons on the author’s iPhone wobbly?

They wobble, but not much. Moreover, I noticed this right from the moment I purchased my first iPhone 5S. I was very worried about this and even wanted to. But all this desire lasted only the first few weeks. Then, as they say, I “got it” and this device has been serving me for the 4th year in a row.

The most interesting thing is that after all this time, the Power button shakes almost the same as it did from the very beginning of use. Although, there are still small improvements - at the end of the article there are observations about what this may be connected with.

In general, if you think logically, then there will always be a small gap in the buttons - after all, they must be pressed, and therefore there will be a small gap.

Before writing this article, I went around to friends, acquaintances, and relatives and “felt” their iPhone for wobbly volume and power buttons. To be honest, I haven’t seen anyone have the most ideal fit - there is a slight move in 100% of cases. Although, on a couple of iPhone SEs the play was quite strong (in my opinion), but the owners simply do not pay attention to it and use the phone for their own pleasure.

On which models is the defect most common?

Judging by the reviews on the Internet, in most cases users are unhappy with the iPhone 5S and SE.

What is logical:

These are some of the most popular and widespread iPhones on the market. The more devices there are, the more likely it is that someone will be upset.
The body of the devices is absolutely the same. Apple, having released the iPhone SE, did not change anything in the design, which means the problem with loose buttons smoothly transferred to the new model.

And although you can also hear complaints from owners of iPhone 6 and 7 about loose power and volume keys, there are still much fewer of them.

Wobbly buttons on iPhone - defective or not?

Let's move on to the most interesting part - is such a defect a defect? What will be the result of contacting the service center - will they repair (exchange) or say that “this is the norm”?

In fact, it is impossible to answer this question unambiguously. Each person has their own idea of quality - what for some seems like a normal movement and “fit” of the buttons, in the eyes of another it will be a terrible backlash.

Moreover, this applies to both the user and the service center employee. There are no clear criteria like “the power key should have a gap of 1 mm and move to the sides by 0.5 mm” in any instructions.

In addition, this deficiency can manifest itself in different ways:

There is some play, but it doesn't affect anything.
Loose buttons interfere with the normal functioning of the device - for example, their rattling can be heard when recording video, or they are pressed “somehow in the wrong way” and jam, or there is some other good reason to recognize this defect as a defect.

Accordingly, in the first case, the service center will call this a “technical play”, a normal situation, design features - and, in general, it will be right. But in the second, you can already focus on the fact that rattling prevents you from using the device normally, which means it’s a defect and.

How to fix button play yourself?

On some forums it is advised to disassemble the device and place something under the Power button - they say, after this the key will become like a glove and will stop dangling. In my opinion, this is a rather dubious event because:

Assembly and disassembly must be done very carefully, and the warranty will be lost (if there is one).
Stuffing any foreign objects inside the iPhone (even if this action has a good purpose) is also undesirable.

There are much simpler ways to eliminate backlash:

Use a thick (for example, silicone) case.
Wait until dust accumulates in the button hole (during normal and everyday use).

I agree – there aren’t very many options. And the second point generally seems ridiculous. But!

Some users actually note the fact that after some time the Power backlash decreases and attribute this phenomenon precisely to the hole being clogged with fine dust. I don’t know how true these messages are, but I definitely wouldn’t intentionally contaminate my iPhone :)

P.S. If the buttons on your iPhone are wobbly, be sure to tell your story in the comments! Does this bother you and will you contact (or have already contacted) the service center?

2014-04-11 19:40:15

It is quite difficult today to find a person who does not know about the reliable operation and high-quality assembly of the iPhone 5s. The smartphone is indeed a leader in a number of indicators. But even the best phone cannot be completely immune from accidents or minor glitches.

Almost all control in the smartphone is done using the touch display. But the most important functions are assigned to the usual buttons. Thus, the sound level is adjusted, the phone is turned on or off and returned to the start page. Be that as it may, these mechanical elements are the weak link of any phone. They can stop performing their functions properly at any time.

Very often, users on the Internet talk about how their volume control button has started to stick. A variety of factors can lead to this phenomenon. For example, a button may become clogged, causing it to become stuck in a certain mode. In this case, the most common cleaning may be necessary. It is possible to carry out this procedure yourself, but there is no guarantee that everything will end successfully. It is best to turn to specialists who will perform all the necessary actions very quickly and will not require high remuneration for this.

There are other reasons. The cable that transmits all signals from the buttons directly to the system may fail. This can happen after the phone falls or comes into short contact with water. In any case, you will need to repair your iPhone 5s here. You should not immediately turn to the Internet for help and study all the training videos that show options for replacing individual phone parts. Without certain skills, it is almost impossible to complete all the actions without making serious mistakes. Any attempts to save money most often only lead to additional expenses.

Sticking of the volume control button can also occur due to a software glitch. Sometimes restarting the device can help in this matter. But such an action does not always turn out to be life-saving.

You can often find recommendations on the Internet regarding programs of dubious origin. According to experts in the virtual space, such applications can help out in any situation. So, if a button on the phone is stuck, the user is offered to download a program that can completely disable this control. Thus, it remains possible to control sound only using the display. The effectiveness of such a solution raises the deepest doubts. After such innovations, it will be very difficult to return the phone to its former capabilities, even in a service center.

You should never delay repairing your smartphone. If the slightest problem arises, it is better to immediately contact specialists who can recommend the best options.

It happens that while working at the computer, you press a certain button several times and then suffer from not the most pleasant sounds. Or you come across a system window that asks you to enable Sticky Keys. You can simply click no and continue working, but better let’s figure out why this mode is turned on, what it is for, and how we can completely disable it.

What is this mode for?

This mode, which can be activated by pressing the Shift key five times, is necessary for people with disabilities. As you can easily guess from the description, it creates some delay after pressing the keys. This is necessary so that, not being able to press several buttons at the same time, the disabled person can activate them one by one and the keys entered in succession will be recognized by the computer as their simultaneous combination.

For example, calling the task manager with the combination Ctrl+Alt+Del or even simply changing the language by pressing Alt+Shift may not be the easiest task for people with disabilities. But sticky keys will allow them to simply press the required buttons one by one.

However, most users do not need this feature. But since Sticky Keys is enabled in the system by default, from time to time you will accidentally encounter the annoying Sticky Keys launch window, or even accidentally turn it on. Therefore, let’s figure out how to disable sticky keys in the system.

Why Sticky Keys Trigger Involuntarily During Games

The fact is that games sometimes require us to press the same button several times in a row. And if it turns out to be a button that, when pressed again, is used to enable Sticky Keys, it ends up with the game being minimized and the corresponding window appearing. Of course, this is very unpleasant and because of this, you may lose your game progress (if the game did not pause when minimizing).

How to disable sticky keys on your keyboard in Windows

How to remove on Windows XP

In this far from the most modern operating system, disabling sticky keys is quite simple. We do the following:

How to turn it off on Windows 7

Disabling Sticky Keys will be a little more difficult on this operating system. We do the following:

In the control panel, we find a section that contains special features that make working with the computer easier. In the same section, conditions for working at a computer for people with disabilities are configured. Let's open it.
We find the item that will allow you to configure the keyboard parameters and open it.
Next, uncheck all the boxes in the “Make typing easier” section.
Then, go to the settings section on the same screen.
Make sure that the “Enable Sticky Keys” option is disabled. If this is not the case, then you should uncheck the box next to it. And you can also turn off the beep when you press keys to get rid of annoying sounds.
After all the settings are completed, reboot the computer.

On Windows 8 and its versions

The method for disabling sticky keys in Windows 8 and all its versions completely repeats the method that we used in Windows 7. However, in this operating system there is another method that may seem easier and more convenient to you. So, we take the following steps:

How to disable Sticky Keys on Windows 10

So we got to the newest operating system. Changes in disabling sticky keys are minimal here, but they are still there. We do the following:

After following these instructions, Sticky Keys in Windows 10 will be disabled.

Video: Disabling Sticky Keys

Now you know what the sticky keys feature on your computer is used for, and how to disable it. This feature, which is useless for most users, will no longer distract you and the utility designed to enable sticky will not bother you while working or having fun.