Replacement of protective film. Instructions for properly applying a protective film to the screen of your device

Youtube

You are planning to equip the display of your phone or tablet with a special film. You should know that this shell will not only protect the screen from scratches, but will also protect additional measure maintaining its integrity when the smartphone falls on the screen.

At the same time, the soft protection takes the brunt of the blow, reducing the possibility of breaking the glass of the gadget. You need to stick the film on the phone correctly for it to work correctly. Plays an important role preliminary preparation screen. But how can you deal with this at home? We will now share a secret with you.

How to choose a film

For the manufacture of modern soft coatings, high-tech materials are used, which have almost no effect on the speed of display response and color reproduction. Film coatings can be glossy, mirror, matte, with an improved shockproof effect.

We advise you to pay attention to products from well-known brands, such as SGP, Ozaki. Their cost is higher than that of universal coatings Chinese manufacturers, but they are easier to glue, have a longer service life, and are created specifically for each smartphone model. Inexpensive universal films have significant shortcomings- they require mandatory cutting and adjustment to the size of the display, and doing this yourself is not always easy; moreover, such a coating is short-lived. Therefore, it is better to opt for a reliable branded product.

Preparing for work

The protective film must be applied to a hard, smooth surface. First you need to remove dust from it. To avoid getting your fingers on the inside of the protective layer, you must first wash your hands thoroughly with soap.

You should also prepare a card made of thick cardboard or flexible plastic to remove air bubbles during the process of gluing the film. Usually included with a branded overlay detailed instructions, as well as a special napkin, a plastic spatula and sticky strips. All this is necessary for proper gluing and leveling of the protective surface.

The old coating, if there is one on the phone, must be carefully removed.

Advice! Do not use a sharp object to remove the previous film. There is a high risk of scratching the display. You need to take two pieces of tape, glue them to the upper and lower ends of the covering and smoothly pull it up.

Protection gluing technology

To properly stick the film on your phone without flaws, you need to follow these steps:

Remove dust and remnants of the old adhesive layer from the phone screen. To do this, we recommend using a special antistatic agent and microfiber cloth. If there is no spray with such a product, it can be replaced with alcohol wipes.
Spray the iPhone screen with spray. Do not be afraid of penetration of the product through the cracks under the case - it will not damage the microcircuits, since it has dielectric properties (cannot conduct current).
Using a piece of microfiber, carefully wipe the display glass until it shines. It is necessary to remove all dirt residues and small fibers.
Remove the film from the packaging, remove the layer protecting its adhesive coating. With great care, place the film above the gadget’s screen and match it with all the buttons and cutouts. Slowly lower the entire shell onto the display and allow it to straighten.
Start smoothing the surface while expelling any remaining air. Take a scraper and perform smoothing movements from the middle to the edges. Do not apply force when pressing - this can leave scratches on the film.

Advice! Under no circumstances should you clean the screen with alcohol, medical alcohol or liquids containing abrasive elements.

Removing dust after gluing

If you find a hair or lint remaining under the sticker, we recommend taking a piece of tape and carefully lifting the covering with it. Use the second piece of tape to peel off the dust from the film.

Then you need to iron the shell again. The adhesive strips included with some films are specifically designed to remove dust particles.

Together with you, we were able to successfully apply protection to your smartphone screen. It turns out that this is not such a difficult task. Try it yourself and you will succeed.

Each mobile device, be it a smartphone or a tablet, today has a large touch display. Naturally, you can control such a gadget only by touching the screen. And this, in turn, causes contamination of the perfectly clean display surface, the appearance of cloudy spots, sweat marks, and so on. And this is not to mention the banal possibility of contaminating the display due to external factors.

The only solution that can help us all in working with devices is a protective accessory - film. We are going to talk about how to properly stick the film on your phone and tablet in this article.

Why glue the film?

In addition to the fact that it protects the screen from dirt, dust and fingerprints, there is also a function of protecting the device display from mechanical damage. And this, believe me, is much more serious.

After all, in real life It is impossible to provide 100 percent ideal conditions for the operation of a phone or tablet - a situation may always arise when some object touching the screen leaves a scratch or abrasion. Obviously, the gadget will suffer from this, not to mention its performance (and image transmission).

If you know how to properly apply a protective film to your phone and do it in a timely manner, you don’t need to worry about your device. You simply remove the old film if its appearance no longer suits you, and replace it with a new one. Thus, the screen of the tablet or smartphone itself will remain intact and unharmed.

Without film, obviously, it will be possible to get rid of the scratches that have appeared only after replacing the screen.

How are films arranged?

Having understood the benefits of protective film, you should pay attention to how it is designed. So, if you take one such film in your hands, you will see that there are two labels on it. The first one may indicate that it is protective layer number one; on the second, respectively, “layer No. 2”.

That's right - modern films are supplied to the market in three layers. If you imagine them in the form of a sandwich with two slices of bread and a sausage inside, then the real film that will protect your screen is that same “filling” (sausage). The outermost layers - the “bread” - will be removed during the installation process. They serve to protect the film itself from damage (both on the top and bottom sides). If you want to know how to properly apply films to your phone, remember to remove them.

Preparing the screen

The key to ensuring that the film will hold securely during use of the device is not only its condition and quality. In fact, the surface on which the film will be glued also plays an important role here. IN in this case This refers to the screen of a phone or tablet.

In order for the film to stick, it is necessary to remove everything unnecessary from the surface of the display: dust, specks, fingerprints, moisture. If anything remains, in the future appearance The gadget's screen will be slightly damaged.

Again, if you want to know how to properly apply film to your iPhone 3q (as well as any other model), don’t forget to clean the display. This can be done using a soft napkin or cloth that does not leave lint.

It's simple: rub the screen and look at it from an angle to determine whether there is anything left on it or not. Ideally, the display surface should look flat and smooth. Then, even after gluing the protective layer of film, the screen will look great.

First step

So, after cleaning the display, the first thing you need to do is try the edges of the film to the edge of the screen itself. According to the instructions on how to properly stick the film on the Fly 4403 phone (and not only on it), the space between it and the display border should be approximately 0.5 millimeters.

This does not mean that you need to arm yourself with a ruler and measure the same distance - no. You just need to figure it out “by eye” so that there is a small gap left from the film. This is normal, because films are produced in slightly smaller sizes than the screen so that they lay more evenly.

After you have marked the “beginning” - the line from which you will glue the film, you need to begin further gluing it. This should be done gradually, slowly. However, read about this further.

Apply film to the device

As you already understood, if you don’t know how to properly stick the film on your phone, start with a clear line, then gradually move to the opposite edge of the device. As experts note, you need to act from the narrower side of your gadget. This will make it easier to glue the film with an even “front”.

Next, you need to use tools to level the surface of the already glued layer of material. In particular, we're talking about plastic card (although some kind of scraper will do). By pressing it to the surface of the display covered with film, you can “drive out” the air bubbles that have arisen there. This way the screen will look nice and neat.

Remove the top layer

After you have managed to cover the device screen with film, move on to further actions, namely, we remove its top protective layer. This is done simply: you need to pull the label remaining on the film, which says “Layer No. 2” or “Remove after gluing” (depending on the type of film). Do this gradually and carefully.

If you have learned how to properly apply a protective film to your phone (Gerffins or any other brand), after removing the top film you should be left with a perfectly smooth coating protecting the device's display. Actually, after this you can start using your gadget.

Possible problems

Trouble may arise if, although you have read how to properly stick the film on your phone, you have not done everything properly. For example, this concerns uneven film gluing or air bubbles remaining on the screen.

In the first case, you can simply re-glue your film. This will take a little time, and if everything is done correctly, the accessory itself will not deteriorate and can be used again.

Another problem is bubbles which will make your screen look unsightly. There are several ways to deal with them. We have already described the first one earlier - you arm yourself with a scraper or a plastic card and simply “squeeze” them to the nearest edge of the device. This will help overcome large bubbles. As for the small ones, most of them, as practice shows, can disappear on their own. So don't be upset if you notice a couple of them. The main thing is that they are not the result of some speck getting between the glass and the film.

Place to glue the film

As noted above, it is necessary to exclude the possibility of dirt, dust, hairs and other objects getting on the glass of the device. This means that it will not be possible to properly glue the film in dirty, dusty rooms. The same applies to open space - the wind can ruin everything.

Go to such a room and glue your film. Let's hope everything works out for you!

How to stick film to your phone or tablet correctly and no bubbles?
An excellent question that interests every owner of a smartphone or other equipment who treats it with care, but does not want to overpay when buying it. Today we will clearly understand how to properly stick a protective film on your phone with your own hands at home.

Required kit

To implement this plan you will need:

Protective film for your phone or tablet for your model
Screen cleaner or alcohol
Clean microfiber cloth for cleaning monitors
A plastic card
Scotch
Straight arms

How to stick a protective film on a phone without bubbles?

I would recommend starting to learn how to glue protective films from a small diagonal. How smaller size surface, the easier it is to stick it evenly and the less likely it is that dust will get under it.

At the preparatory stage, first of all, choose a room in the house that has the least amount of fabric and, as a result, dust - the bathroom or kitchen would be an ideal option. And second, wipe the table on which you will glue the film on your smartphone with a damp cloth.

After this, we print out a fresh, clean napkin, spray it with a can of cleaning liquid and wipe the monitor clean so that its surface is perfectly clean without any streaks or dust. If even the smallest particles remain, they will lead to the formation of difficult-to-remove bubbles under the film.

Next, we take the film and see two labels on it with the numbers “1” and “2”. These are markings on external films that protect the protective film itself, which we will stick on the phone, from damage. We apply it to the screen and see how all the technical holes for the buttons, camera and sensors fit together.

Carefully tear off the outer protective film marked “1”. You can do it all at once, or you can start from the top edge - whichever is more convenient for you.

If there is a large central button, then it would be best to remove the protection completely and apply the film first along the central axis, and then smoothing the edges away from it.

During this process, air bubbles may appear - we do not pay attention to them, and after the film is evenly glued to the entire surface, we take a regular plastic card and squeeze them out from under the film to the edges of the screen.

After this, you can remove the second auxiliary layer with the number “2” and finally smooth the film over the monitor with a napkin.

In the event that there are bubbles with dust spots underneath, then take regular stationery tape and cut off 2 strips from it. We glue the first piece on top of the film to raise it. And carefully place the second one from the inside on the part on which the dust remains and remove it. Then we return the protective film to its place and smooth it out.

For clarity, I also provide a video showing how to stick a film on a tablet using an example iPad Mini.

If the screen of your smartphone is not protected with a special protective film, then its surface will become covered over time. with the smallest scratches, accumulates transparent, barely visible cracks and noticeable chips. As a result, the screen surface becomes cloudier, which significantly worsens color reproduction and reduces clarity.

What is a protective film?

Protective film is a thin, durable and high-quality polymer material. The structure of the film has several layers, each of which allows you to reliably protect your phone screen from sun glare, scratches, abrasions and light mechanical stress due to the use of the device.

Rice. 1. Multi-layer polymer protective film (universal)

A little earlier, protective films were a new product, they were produced in limited quantities, they could only be bought for popular phone models, buyers had to be content with what was on sale. Today, the mobile accessories market is ready to offer films “for every taste and color,” the most popular of which are:

Mirror protective films - when the backlight is off, the effect of a real mirror,
Glossy is one of the most durable and high quality transparent films available.
Matte protective films have an additional anti-reflective layer.

All films are thin and, when glued, are practically invisible on the device. They are suitable for capacitive and resistive screens. But even with all the wide assortment, it’s difficult for manufacturers to keep up with new models, and if you still go to the store, you may not find a protective film for your phone model. In this case, a universal protective film of a suitable size can help out.

Universal films come in 5”, 7”, 8”, 10” and more inches. For ease of marking, graph paper is applied to one side, which is removed after cutting to the required size.

Rice. 2. Universal film with graph paper can be of different sizes, from 4" to 15"

Don’t be afraid to cut out the required shape correctly, it’s not at all difficult. You just need to know how to do it correctly. Let's prepare the tools for work, you will need:

Rice. 3. Tools for work:

Metal ruler of the required length,
Stationery cutter,
A fine marker for marking dots and trim lines.

You also need to build a place where you can sit and cut out the film. A flat working surface can be, for example, an old unnecessary magazine with a smooth cover lying on the surface of the table.

As auxiliary elements maybe metal coins different sizes, they will help cope with curves.

How to cut protective film to size

In order to cut the film to size, it must be marked correctly. First of all, decide where the layer that will stick to the screen is so that you can cut it accordingly.

Rice. 4. Protective film, layers to determine the side to be glued. It should be understood this way:

On the film, the manufacturer marked only the sides “1” and “2” with stickers, and the middle main layer is clean.

Rice. 5. Position the film on top of the smartphone

Place it on top of your phone protective film, starting from the upper left corner, taking into account future rounding, if any. Step back 0.5 mm from the edge of the screen.
Carefully mark on the film with a marker the points where the edge will go so that you can draw contour lines through them.
Using a ruler, connect the dots with a marker to create a cutting line.
Place the film on the prepared work surface (magazine) and use a metal ruler to trim the edge using a cutter.

Rice. 6. Cut out part on film

After the film is cut to size, all that remains is to give it a finished look - cut out the missing curves. In the required places, place a prepared coin of suitable size, press with your finger and cut the arc line. In the same way, cut the rounded oblong area for the navigation button and earphone.

Rice. 7. Selecting the appropriate coin diameter to create rounded cuts

Rice. 8. Completely finished cut out surface of the protective film for subsequent sticker

Pre-clean the surface of small debris, lint and various types of greasy stains, for this use pharmaceutical alcohol for injection. Moisten the corner of the cotton pad moderately and walk without pressing over the surface of the screen. A degreased screen will have reliable adhesion to the surface of the film.
After degreasing the surface, do not touch the prepared surface with your fingers; a completely clean screen is the key to a high-quality sticker.

Who among us does not want to be acquired mobile phone not only served for a long time, but also did not lose its original presentable appearance? A protective film for your phone will help protect your mobile device from scratches and other possible damage. It is especially necessary for owners of phones with touch screens. To avoid mistakes when gluing the film and not to be disappointed with the result, you should pay attention to a couple important points. We have prepared a small step-by-step instruction on how to stick the film on your phone. In addition, we will recommend a smartphone model that is distinguished by its quality and reliability, and with the film glued on it can last for more than one year.

Choosing Fly: Advantage, model selection

Types of protective films

Phone film sticker: The necessary conditions and improvised means

How to cut a film for a phone that matches its size?

Applying a protective film to your phone: preparing the device

Putting a protective film on your phone

Choosing Fly: Advantage, model selection

For just 6,500 rubles, the user receives great smartphone, which meets all modern technological requirements. The bright 5.5-inch IPS screen with HD resolution and rich color reproduction is simply designed for comfortable work with web pages, applications, documents, provides comfortable viewing of videos and photos. The powerful 1.25 GHz quad-core processor easily runs any application and ensures a smooth interface. A capacious 2800 mAh battery will keep the smartphone operational for up to 10 hours in talk mode and up to 280 hours in standby mode.

Of course, a great phone needs quality protection. And now it’s time to talk about how to properly apply protective film.

Types of protective films

The main task of the film is to preserve its presentation for a long time. cell phone. In addition to this task, a protective film is used to matt the screen, or vice versa, to create a glossy effect, and protects the screen from fingerprints. Accordingly, you can purchase a variety of films depending on the purpose of their use: matte, glossy, anti-reflective. Each person chooses a film based on personal tastes and preferences. Thick films are easier to stick than thin films. They don't stretch. However, it is worth considering one fact: a thick film reduces the color rendition of the screen and its sensitivity.

Glossy films of medium thickness are considered universal. You can find them in communication stores or online stores. They will suit any user. If you don’t know how to stick a film on your phone, we will help you. Everything is done as simple as shelling pears.

Sticking a film on a phone: Necessary conditions and available means

We will need a soft napkin. You can take one of those used for wiping monitors.

Where to stick the film on the phone? It is better to carry out such a procedure in a room where there is no large quantity dust. You can use the bathroom. To create high humidity, which is an indispensable condition for proper film gluing, turn on the water for a couple of minutes. Use a plastic spatula or credit card as a smoothing tool.

How to stick a film on a phone

Sticking film on your mobile device occurs in three stages. We will describe them to you below.

1. How to cut a film for a phone that matches its size?

In order not to be mistaken with the dimensions, use as a sample the film that the phone was equipped with during packaging at the factory. It matches the screen exactly and will serve as an excellent example.

Remove the original film and place it on the protective film, carefully aligning it.

Take a special knife and scissors. Using them, cut the film of the required size according to the existing sample. In a couple of minutes, the result is ready – a new film for your irreplaceable and favorite gadget.

2. Applying a protective film to the phone: preparing the device

Your first step in this procedure is to thoroughly wipe the screen with a microfiber cloth. Then we prepare a solution based on soap or shampoo in the following proportions: add one drop of soap to twenty grams of water. We take a brush and use it to cover the screen with a thin layer of the prepared solution. This procedure will help the material not stick haphazardly, and will make it possible to easily fix it in the correct position.

3. Place a protective film on the phone

The material we will have to work with has two different protective coatings. On the front side it is colored, and on the side of the adhesive layer it is transparent.

You should remove the transparent coating, and then place the film with the adhesive layer to the screen. Carefully align the film. The previously prepared solution helps us with this.

Now feel free to remove the second coating. It's time to use a plastic card. Use it to expel the air formed under the film. Do this from the center of the screen to the edge. Wipe off any remaining soapy liquid with a swab. Avoid getting the solution on the device buttons.

That's all. The hard work is done! Your mobile phone is like new.

Leave the device alone for a while to allow the film to dry. After an hour or a little more, you can safely use it.

· To properly stick the protective film on your phone around the edges, cut it with a gap of a millimeter from the edge of the screen.

· Avoid touching the adhesive side of the material, otherwise there is a risk of dust being deposited on it, which may cause bubbles to form.

We wish your phone long life!