I forgot the code on my iPad. What to do if you forgot your iPhone or iPad lock password
Who doesn’t experience such a trap when you forget the password to log into a tablet device? It doesn’t matter whether you are a beginner or an experienced user; unfortunately, memory is not perfect, and different situations arise. First of all, a reasonable question arises: how to hack an iPad using a password?
If you have such a question, then this article will help you consider and choose different effective ways erasing the security password, to the extent possible. People usually forget the lock password on a tablet, which consists of four characters. A password on an iPad is usually set by its owner to protect the data on it so that photos, documents, videos, passwords and other files do not fall into the wrong hands that could harm you.
Reset forgotten password You can try it if the firmware is installed on the tablet iOS versions 7.0.4. This method can be used with other firmware, but no positive guarantees can be given. If all selection attempts forgotten code were unsuccessful, which means that all that remains is to reset the password through the iTunes program.
Check the speed of your Internet network, if it is average or higher, then use this method of resetting the lock password, in which the iTunes program will act as a hacker and, after downloading your firmware, will unlock and restore the iPad, destroying the forgotten password.
When the Internet speed is low and leaves much to be desired, then the second option for resetting the lock password is suitable, which uses the downloaded firmware from the iPad. However, using this method, you will completely erase the contents of your iPad. If it is possible to copy information, do it in advance so that later, after deleting the files, you can restore the contents of the iPad.
So, using this method, check the availability of high-speed Internet. If it is missing, it is better to find another Internet where the speed is always consistently high. This is due to the fact that when resetting the password, a fairly large volume of firmware will be loaded, possibly weighing up to 1.5 GB.
To begin, unplug your iPad and plug the cable into USB port on a PC by connecting it to the tablet. Let's start the mode iPad recovery. When a note from iTunes appears on the screen that it has been detected iPad device in recovery mode, click the “OK” button, and in the iTunes program, run the “Restore iPad” task. After which a message may appear on the screen indicating that the mode is turned off. automatic check iTunes updates and iPad. You will also be asked to select “check for software updates automatically” in the settings. Your task is to agree, that is, select “check for updates automatically.” This will be followed by a repeated question about restoring factory settings. iPad settings, which will lead to the loss of all data on the iPad and data recovery. You select the “Restore and Update” command and accept all the conditions.
After this, iTunes will start downloading new firmware on iPad. This may take long time: one or two hours. If the iPad turns on at this time, you need to repeat all the manipulations, bringing it into recovery mode.
If the message “Error 3004” appears during the process, you should log into iTunes through a browser Internet Explorer and repeat the recovery process again. When the recovery process is complete, the Apple logo and the restored screen will appear on the iPad screen software will load, displaying all the icons. During the activation process, be sure to follow the “Set up iPad as new” command without using a password.
If your information is backed up, you can restore your data from the latest backup by filling in your saved contacts and files.
How to reset the lock password on iPad if internet speed is bad
In the event that the Internet speed is not the best, in order not to spend half a day downloading the firmware, stock up on the finished firmware file for your iPad by downloading it from another place. The firmware format should be “*.IPSW”. Select format required firmware on iPad you can go to AppStudio.
We install the finished firmware through the iTunes program, using the Internet at low speed, and reset the password, restoring the firmware to iPad themes in the same way and in the same order of actions. When you reach the “Restore iPad” point, select the firmware manually and, by clicking the “OK” button, confirm your actions to reset the password and delete all existing data. When the recovery process is complete, the iPad will display the new kind just like when you bought it. All that remains is to activate the iPad and not enter any lock password.
How to recover data on iPad after unlocking
Data recovery on iPad occurs when you have backed up your data in advance, for example when syncing with iCloud. To do this, open the iCloud program, filling in the password and number, and then give the command “recover from iCloud”. All data once saved on the iPad ( notebooks, contacts, photos, music, videos, etc.) will be moved from the backup to your tablet. In this case, the program will not ask for a forgotten or hacked lock password.
Unfortunately, human memory is imperfect, and, moreover, has been studied little by science. That’s why people sometimes forget even fairly simple things. The situation in which the user forgot the password on the iPad is one of these, since the password itself is digital code, which with constant use is quite difficult to forget.
However, if this does happen, then a way out of this situation can be found; the only question is what losses will be incurred.
In fact, recovering a password on an iPad can be done in two ways - with complete loss of data on the iPad and without it, but with the possible loss of some recent data. There is also a third method, which does not entail any losses, but in most cases it will not work. Let's look at each of these methods in more detail.
1. Reset iPad
The essence of this option is that we completely “reset” our device to factory settings - then the password is reset and you can use it again.
To do this, you need to do the following sequence of actions:
- Turn off your iPad.
- Connect it to your computer via USB port.
- Hold the power button for three seconds, then, while continuing to hold it, simultaneously press the “Home” button and hold it for about ten seconds, then release the power button, and continue to hold the “home” button for the same amount of time. The meaning of these actions is to transfer your device to the so-called DFU mode.
- Launch iTunes, select your iPad and click on the “Restore” button.
- In the window that appears, select the “new device” option.
After these steps, the iPad should be reset to factory settings.
Attention: all your data will be destroyed!
2. Restoring a backup
Let’s immediately make a reservation that this option is only possible in cases where you have configured backup of data from your device.
Copying data is possible to iCloud or to iTunes - depending on which of these options you use, you will need to view the list of backup copies either in cloud service Apple or iTunes.
The task is to remember the moment at which you decided to set a password. You therefore need a recent backup before you implement password protection. You will have to roll back your device to this backup - accordingly, the data entered after setting the password will be lost.
To restore, you need to follow steps 1-4 from the first method, just do not create a new device, but select the “Restore from backup” option, and then select the corresponding backup file.
3. Remember everything
Unfortunately, both the first and second methods described above entail a certain loss of data - complete or partial.
If this is unacceptable for you, then you can try your luck with method No. 3 - try to remember the password.
Firstly, if you injected it often, you may have retained so-called muscle memory. If it doesn’t work for you, then it may be blocked by consciousness. Try this trick: Go to bed and set an alarm on your phone to remind you to turn on your iPad. When he wakes you up, it is possible that in the “automatic” mode your fingers will enter the required code.
Secondly, most often the numbers that you set as a password mean something. Try to think about what digital combination You could use. Just remember that you will only have nine attempts, since on the tenth all data from your gadget will be destroyed.
Doesn't happen to anyone. You set a password on your iPhone and forgot what it was. Or the device has been sitting in a drawer for some time. One way or another, it is always better to know what measures to take in such a situation.
What to do if you forgot your iPhone password? In this article we will look at everything available options Removing the password from the device's Lock Screen. If the ID is not unlocked, please contact Apple support immediately with this issue.
If the password on the iPhone is entered incorrectly 6 times, the device is blocked for a minute, if after that you enter it again wrong password No. times, then it will be blocked for No. minutes, etc. In short, the more you try to pick it up, the longer you will have to wait. Also, if you have the “Erase data” function enabled, then experimenting with selecting a combination is strictly prohibited. This function erases everything iPhone data, if the password is entered incorrectly 10 times. To enable it you need to: go to settings - password - opposite the "erase data" field, set the slider to on mode.
There are three ways to restore your device if you forgot your iPhone password, so...
We remove the password if synchronization with iTunes was carried out.
If your device was previously synced with iTunes, you can restore it. This is the most painless way, all data will remain on the device.
Removing a passcode using Find My iPhone
If Find My iPhone is set up on your iOS device, you can use iCloud to erase and restore it. This is if you forgot the password for your iPhone, but did not forget the password for your Apple iD :) In this case, all data from the iPhone will be deleted.
Now you can either restore your device from a backup or set up your device as new.
Removing a password using recovery mode
If you've never synced with iTunes or set up Find My iPhone in iCloud, you'll need to use Recovery Mode to restore your device. If you forgot your iPhone password, this method always works. In this case, the device will password erased and all data.
- Connect iOS device to your computer and open iTunes.
- After connecting the device, perform a forced restart:
- Press and hold the Sleep/Wake and Home buttons at the same time.
- Don't release the buttons when you see Apple logo- wait for the recovery mode screen.
iTunes program will begin downloading software for the device.
All of us are far from being robots, and therefore we can easily forget the password we just assigned on our device. That is why today we will tell you how to unlock an iPad if the password has been forgotten. In fact, the process is quite simple, but without detailed instructions It will not be easy to cope with, especially for those who have not previously dealt with Apple devices. Actually, this is not a threat to you.
Restoring a backup
First of all, we suggest that you start unlocking if there is a backup copy of the device on your computer.As you know, this procedure becomes available only in one case, if the iPad was previously connected to a PC and, as a result, to iTunes. In this situation, there is a high probability of unlocking it using standard recovery. So, you have to do the following actions:
We would like to notify you that in this case all settings, files and other data will be lost, that is, erased. However, do not be disappointed - they can be restored from a backup copy on the same screen as under point 5.
Thus, there should be no problems. But what should you do if you haven’t connected your device to iTunes yet, but have managed to lock it and don’t remember the password?
If the tablet does not connect to iTunes
Surely you yourself understand perfectly well that if the gadget is not connected to iTunes, the number of problems will increase significantly. It’s okay, we can handle this too. So, when you connect your iPad to your PC (while connecting to iTunes), you see an error like in the screenshot below.
To cope with it, you need to do the following: 
Of the minuses, it should be noted that you do not have a backup copy, which means you will be left without all those files that were on this tablet. Of course, this is a huge minus, but you yourself returned the functionality of the gadget, you didn’t have to pay anyone, and you will continue to create backups more often, so that the question “How to unlock an iPad without losing data if you forgot your password?” did not arise again.
At first glance, it seems strange when you hear that people are looking for how to unlock an iPad if they forgot the password, but anything can happen in life.
Surely those people who care about the confidentiality of the contents of their tablet often change the password to it.
In this situation, in order to unlock the tablet, you need to delete information from it. This can be done in the following ways:
- using the iTunes application;
- using the Find iPhone function;
- going into recovery mode.
Advice! Before you recover your iPad password, you need to create a backup copy of the data contained in it, since during the deletion process iOS password will be reinstalled, and all data from it will be erased.
It is also advisable to make backup copies from time to time, saving the data stored on the tablet.
Backup is necessary for those who store valuable information on their gadget.
Because even if the tablet is lost, restoring the data will not be difficult.
It is convenient to create backups using iTunes or iCloud.
The first of them saves all information completely, and this process can take a long time.
The second one creates backup copies only when wi-fi help and the speed of its operation depends on the speed of the Internet.
Moreover, it is impossible to use these programs at the same time, since they deactivate each other.
How to unlock iPad using iTunes
If the tablet was synchronized with iTunes, then you can unlock it by performing a few simple operations:
- Connect iPad to personal computer, with which you want to synchronize.
- If you have previously synchronized with this computer and created backups, then when you start iTunes, synchronization will occur again, even when the portable device is turned off.
It will look like the picture.
- Before restoring the tablet, you must disable the encryption of the previously created backup.
- After graduation Reserve copy It is recommended to go to the “Restore from backup” function, then it is recommended to select the most new copy in the device memory to unlock the iPad.
Do not forget that you can configure the tablet in such a way that next time, with a tenfold incorrect insertion password, the data was erased and the device’s operation was restored.
How to restore your iPad using Find My iPhone
In this case, you need to go to icloud.com/#find to search page to make sure Find My iPhone is turned on on your tablet.
Then, in the browser window that opens, you need to call up a list of all devices and, selecting your iPad, click on the “Erase” button to delete it previously set password and unlock the device.
Using the settings assistant on your iPad, you can easily restore erased data from the latest backup, as shown in the figure.
How to use recovery mode on iPad
If it is not possible to apply two previous methods, you should do the following:
- Disconnect all cables from the tablet and turn it off.
- While holding down the Home button, connect your iPad to iTunes and turn on the device.
- When the iTunes program notifies you that the device is in recovery mode, click “OK.”
If backups were never created on a locked device, then when you restore it, all data, programs and applications will be lost.