USB flash drive recovery. Recovering SD cards and USB flash drives in Windows


The South Korean-Hong Kong company Qumo is a popular manufacturer of flash drives, multimedia devices, tablets and other electronics. The products of this company have gained popularity due to low price and good quality. The company's production lines are located both in Korea and in Taiwan and China.

Flash drives and memory cards produced by Qumo 32gb, 8gb, 4gb fail quite often. This happens due to software failures, aging and imperfect equipment, getting wet, etc.

Flash memory, like memory cards, has a certain number of write/read cycles. If the flash drive is used for a long enough time, then it may well appear broken clusters. File system errors are also often the cause of failures. They appear during incorrect termination work (pulling out a flash drive) or during power outages.

What to do if flash drives are not detected?

In cases where a flash drive or card is not detected when connected, shows zero memory or is defined as unknown device— their restoration is required. Some brands have special recovery utilities, but Qumo is not one of them. Therefore, to “treat” them you need to use universal programs low-level programming.

  1. Recovering and saving information stored on damaged media. After running any recovery program, all data on the flash drive or memory card will be lost. Therefore, if this information is important, use the R-Studio program or another similar program before repairing. Use it to create a disk image, scan the amount of information, and then restore everything that can be recovered. R-Studio is a program that is not the fastest in operation, but is capable of restoring as much information as possible on damaged media.
  2. Use a utility program suitable for restoring Qumo cards and flash drives:
  • USB Disk Storage Format Tool. An HP program that is perfect for formatting Qumo storage devices.
  • EzRecover– universal software tool, among others, capable of repairing the Qumo drive. After installing the program, insert the broken flash drive into your computer and run EzRecover. The program will give an error the first time you run it, but the next time it will definitely detect a flash drive or card and give you the opportunity to restore it.
  • Flashnul. This program does not eliminate errors, but simply identifies defective parts of the device and resets the information.

Tips: In fifty percent of cases, an SD card that cannot be formatted on a computer can be formatted perfectly on another device. Try formatting using your phone, camera, or something else. If this works and you can read and format the flash drive in this way, then repeat the formatting on your PC after that.

Looking for how to recover data Mirex flash drives ? Did performance problems or errors in the Mirex flash drive cause data loss? Is such data always lost forever or are there ways by which it can still be recovered? Repair the storage media, correct errors that lead to malfunctions, and recover lost data yourself.

If you need to recover a hard or external drive (HDD, SSD or SSHD), memory card or USB flash drive, first of all you need to connect the device to your computer. If you want to recover data from a car recorder, phone, photo or video camera, audio player, you must remove the memory card and connect it to desktop computer. You can try it these instructions and for internal memory devices, if after connecting you see your device in the My Computer folder as a flash drive.

Repair and data recovery of Mirex flash drive

Step 1: Mirex flash drive recovery program

In cases where files have been deleted from a Mirex flash drive and it is not possible to return them using standard operating system tools, the most in an effective way will be used Hetman Partition Recovery .

For this:

  • Download the program, install and run it.
  • By default, the user will be prompted to use File Recovery Wizard. Click the button "Further", the program will prompt you to select the drive from which you want to recover files.
  • Double click on the disk and select the analysis type. Specify "Full Analysis" and wait for the disk scanning process to complete.
  • "Restore".
  • Select one of the suggested ways to save files. Do not save recovered files to the disk from which these files were deleted - they can be overwritten.

Step 2: Recover Mirex flash drive data after formatting or deleting a partition

Recover files after formatting

Are you looking for how to recover Mirex flash drive files after formatting? Follow the instructions:

  • , install and run it. After launching in the left column of the main window, the program will detect and display all physical disks, as well as accessible and inaccessible partitions and areas on the disks.
  • Double click on the disk or area files from which you need to recover and select the type of analysis.
  • Select "Full Analysis" and wait for the disk scanning process to complete.
  • After the scanning process is completed, you will be provided with recovery files. Select the ones you need and click the button "Restore".
  • Select one of the suggested ways to save files. Do not save files to a disk from which these files have been deleted - they can be overwritten.

Recover deleted partition data

Looking for how to recover files from remote partition Mirex flash drives? Follow the instructions:

  • Download Hetman Partition Recovery, install and run it. After launching in the left column of the main window, the program will detect and display all physical disks, flash drives or memory cards. The list of physical devices is located after the logical drives.
  • Double click on the physical device from which the partition was deleted.
  • Specify "Full Analysis" and wait for the scanning process to complete.
  • After scanning, you will be provided with recovery files. Select the ones you need and click the button "Restore".
  • Select one of the suggested ways to save files. Do not save files to a disk from which they were deleted - they can be overwritten.

Recover system partition data on another computer

In case of loss system partition, it is impossible to boot the computer. That's why:

  • Remove or disconnect the hard drive with the lost system partition from the computer.
  • Connect this HDD to another computer.
  • Make sure your hard drive is recognized correctly by the other computer.
  • Carry out the steps indicated in the previous paragraph.

Recover your system partition using LiveCD

If it is not possible to connect a hard drive with a lost or damaged system partition to another computer, you can restore such a partition by starting the computer using LiveCD - an alternative portable version operating system. For this:

  • Find and download the LiveCD that suits you to a CD/DVD or USB drive.
  • Connect the LiveCD to your computer and turn it on. The computer will automatically boot from the LiveCD.
  • Copy files from the system partition to another storage medium (often external hard disk).

Step 3: SMART parameters of Mirex flash drive

Large manufacturers hard drives include S.M.A.R.T technology to their hard disks. S.M.A.R.T. analyzes a variety of mechanical attributes. Analysis of many of them makes it possible to record the incorrect operation of the disk before its complete failure, as well as the reason for its failure.

But even though S.M.A.R.T. allows you to identify future problems, most of which cannot be prevented. So S.M.A.R.T. is a technology that often serves to warn of imminent disk failure. S.M.A.R.T. values cannot be fixed, and there is no need to waste time on it.

Each hard drive manufacturer sets a threshold value for a particular operation. Under normal circumstances, such a threshold is never exceeded. Otherwise, we encounter an error.

There are 256 values, each of which has its own ID. Some errors and limits are critical. They don't have a solution. The only solution is replacement hard drive, immediately after discovering such an error.

Critical SMART errors have no way to fix them. If you do not replace the hard drive, the error window will appear again and again. The only justified action in this case would be to save data from still available disk sectors. If the error warning comes true, the disk will become inaccessible to any program. Therefore, it is necessary to take steps to save your data.

Step 4: Restore the file system of a Mirex flash drive

Format storage media

If it is not possible to determine the file system of the Mirex flash drive, format the device.

Mirex flash drive file system is defined as RAW

Sometimes the operating system cannot determine the file system structure (for example, FAT or NTFS). If you look at the properties of such a device, its file system will be defined as RAW. In that Windows case prompts you to format the disk.

There are utilities that specialize in recovery RAW disk, however, we recommend choosing a universal solution - Hetman Partition Recovery. This function is included in it as an additional one, you only need to launch the program and start analyzing such a disk.

In some cases, the file system of a Mirex flash drive can be restored using the command CHKDSK.

  1. Run Command line on behalf of Administrator.
  2. Enter the command “chkdsk D: /f”(instead of D: – enter the letter of the required drive) and press ENTER.
  3. After running the command, the process of checking and correcting errors on the disk or device will begin, this can restore the functionality of the file system.

Step 5:

If a USB flash drive, memory card, or any other type of storage media is not working properly, cleaning the disk and its partitions using the “Clean” command and the Diskpart tool can be one way to solve the problems. This tool will fix errors if the device cannot be formatted or its size is determined incorrectly.

  1. Run Command line on behalf of Administrator.
  2. Run the command DISKPART.
  3. Display a list of drives using the command LIST DISK and determine the number of the disk that needs to be restored.
  4. Select the required drive: SELECT DISK #(instead of # - enter the disk number).
  5. Run the command CLEAN.
  6. Create a partition on the cleaned disk and format it with the desired file system.

Step 6:

Scan the disk for errors and bad sectors and fix them

Start checking everyone hard sections disk and try to correct any errors found. For this:

  • Open the folder "This computer".
  • Click right click mouse on the disk with an error.
  • Select Properties / Service / Check(In chapter Checking the disk for errors).

As a result of scanning, errors found on the disk can be corrected.

  • Open the folder "This computer" and right-click on the disk.
  • Select Properties / Service / Optimize(In chapter Disk optimization and defragmentation).
  • Select the drive you want to optimize and click Optimize.

Note. In Windows 10, disk defragmentation/optimization can be configured so that it occurs automatically.

Step 7: Mirex flash drive repair

It is important to understand that any of the methods for eliminating Mirex flash drive errors is just their virtual elimination. It is often impossible to completely eliminate the cause of the error, since the device requires repair.

To fix a breakdown or replace parts and microcircuits of a Mirex flash drive, you can contact a service center. The cost of work in this case will be many times higher than the cost of a failed disk or memory card. It makes sense to do this only if it is necessary to restore important data.

Step 8: Mirex flash drive backup

There are several solutions for creating data backups:

  1. Applications built into the operating system. Microsoft Windows provides data backup methods that involve saving files and data on external or built-in storage media. All modern versions Windows already includes the ability to create a backup copy necessary files or the entire hard drive, if necessary. Provided Windows functions are complete and independent, and are aimed at ensuring that you do not need to use third party services or programs.
  2. Copying data manually. You can always use the old proven method of creating a data backup - manually copying the data to external media information. This is a long process, but if you work with a small amount of data, this solution may be quite acceptable for you.
  3. Online services. IN Lately is becoming increasingly popular modern way data backups are numerous online services. Companies that provide backup of your files directly on the Internet. Small installed on your computer background application, creates copies of the necessary data and stores them on remote server. However, the volumes provided by such companies for storing your files in free version do not allow them to be used as comprehensive solutions. Often the space offered for data backup does not exceed 10 GB, so there is no need to talk about creating a backup copy of the entire hard drive. Such services are rather aimed at reserving a separate number of files.
  4. Creating a disk image. This is the most complete data backup solution used by advanced users. This method involves the use third party program to create an image of the entire disk, which can be deployed, if necessary, on another storage medium. By using this decision, you can in a short period of time gain access to all the data that was on the disk at the time of its backup: documents, programs and media files.

Mirex flash drive models for 64gb, 32gb, 16gb, 8gb, 4gb, 2 gb:

  • ARTON;
  • BINAR;
  • KNIGHT;
  • RABBIT;
  • ROCKET DARK;
  • DRAGON;
  • HARBOR;
  • CHROMATIC;
  • TURNING KNIFE;
  • Crab;


Problem MicroSD recovery Nowadays it is more popular than ever, and is in great demand. Flash drives often break, but half the trouble is when it just breaks, the second “bad” part is that the information on it is also lost, which is undesirable.
That is why questions are often asked on the Internet about how to get information from a broken flash drive.

The problems with this can be very diverse, some simply cannot restore the media, while others produce errors.
There are specially designed for restoration special programs to restore a MicroSD card. The user only needs to point to them.

1. MicroSD recovery programs

ColdRecovery
It does an excellent job of restoring photos, audio recordings, videos, etc. Regular files the program cannot restore, so it is suitable only for those media that are used on cameras, phones and music players.

How to use CardRecovery:
1. Download the program. We launch and continue the actions with the “Next” button.
2. Select in the special section “ Drive Letter”, and then the device type “Camera brand and...”, where we check the required boxes opposite them and specify the folder for data recovery. " Next».
3. Wait for completion and “ Next».
4. Look at the list of recovered files. Check the box next to the ones you want to save. Again " Next" The restoration is complete.

PC Inspector Smart Recovery
The program is superior to the previous one in its functionality; it will restore all required, available file types. It can also work to restore fixed and removable hard drives.

It's easy to use:
1. Download Smart Recovery;
2. In the start window, select the desired item, in our case it is “recovery of logical files”.
3. Select the required disk.

R-Studio
On the forums and the official website they write that this software is the most “comprehensive”, and it will restore most of the files intact. Users agree to this.

To recover data using R-Studio, you need:
1. Download R-Studio to your PC.
2. Select the section " Drivers", where you will need to select the media from which the data will begin to be restored. The Properties section should now start displaying the properties of the object being restored.
3. In the next section " Folders" shows folders, and in another " Contents" - data (files) of this folder. To restore them, you will need to click on the item “ Recovery».

Easy Recovery
Many professional users praise the program and its file recovery capabilities.

There is only one way to check the functionality of file recovery from Easy Recovery:
1. Install it before downloading.
2. When starting, press “ Continue", then select " Memory card».
3. Press “ again Continue" Next go to " Data recovery", and check the box under this item.
4. “Continue” again. Now all that remains is to wait for the process of scanning all deleted files and compiling a list to complete. Each file can be recovered separately. Select it, right-click on it and select “Save as...”.

Flash Memory Toolkit
Functional file recovery program. She can do the most different function, including testing and destruction of any information, its backup and obtaining additional data.

To restore data, select the desired flash drive in the “Device” section, look for the item “ File Recovery» on the left and follow the software instructions.
It may happen that restoring a microSD using the programs provided above is not always successful.

2. Possible problems with MicroSD recovery

MicroSD not defined
It happens that the MicroSD card needs to be restored, but the PC simply does not see it. If this happens, there are three possible ways to solve the problem.

1. If the flash drive is designated simply by a letter when connected. Then you need to open the Disk Management program, to call it you need to enter a command in a special execution field called up by a keyboard shortcut Win+R, and enter the command into it diskmgmt.msc. Select the flash drive, and then click “Change the drive letter or path to it.” After which you will need to select any other letter of the alphabet and save the changes.


2. Lack of drivers. In some cases, a new PC may simply not have a special driver for the media. The solution is to install them. This is best done through off. Website. Of course, a good option might be a special Driver Pack " DriverPack Solution " It can independently detect all devices connected to the PC and install or update drivers for it. This method is very attractive and convenient, since in this case there is a minimum of user actions.


3. The last option is simply to disconnect this flash drive and connect it to another device, which will give you a chance to read the files on it, or restore them using software.

The computer does not see files on the MicroSD flash drive
This means that the computer does not see the flash drive in its entirety, but only partially, that is, some files are there, others are not. Often, users immediately come to a simple conclusion - the problem is in the flash drive and it needs recovery, but the problems, most often, are much simpler.

The solution to this popular problem is as follows: viruses, most often Trojans, need to be removed. Indeed, the Trojan may hide some or all files. Therefore, just turn on the flash drive in your PC and scan it with an antivirus.

3. MicroSD cards. Restoration from different manufacturers.

MicroSD Transcend recovery
For such cards, manufacturers have created their own, original software to recover lost files. It's called software RecoverRx. The provided software takes into account all the features of the map, and is also capable of performing a number of functions better than any other programs. RecoveRx can format the microSD and also set a password on it.

MicroSD Transcend Recovery
1. Naturally, download the program from the official website.
2. Select required types files.
3. Wait for the end of the process.

MicroSD Kingston recovery
The problem with this manufacturer is the Phison controllers. Which means that only low-level restoration can be done.

Other methods simply will not bring results.
1. Determine the Product ID and Vendor ID parameters to find the best utility. This is done using another program - USBDeview. Open the software and find the required card on the disk. Right-click and select “html report: selected elements”. Scrolling the window below, we see the two required IDs.


2. Go to the website flashboot.ru/iflash, then enter special parameters into the required fields. As a result, you will see all the problems that have ever occurred with a certain model cards.

MicroSD Kingmax recovery
Kingmax got its own software. In general, there are two programs - one is PD-07 and U-Drive, and the other is Super Stick. Their use is as simple as possible: start - select a drive.

MicroSD Sandisk recovery
Users note that in case of any problems, Sandisk will only help with full formatting. After which the flash drive works as if it was just purchased. The program is also very easy to use.

MicroSD Smartbuy recovery
This is a very interesting manufacturer with “unique” flash cards. In the case of SmartBy, if the flash drive suddenly stops working, then after some time (a day, a week, a month, up to a point), it can start working again on its own. But if you don’t want to wait, you can try to restore it using special programs.

There is a program specifically for such flash drives “ DiskInternals Uneraser" The application looks like regular folder. Select the desired media and click on the " Recovery", aka " Recovery", you can restore files at the end of the process.

MicroSD Qumo recovery
Qumo flash drives are notorious for stopping working out of the blue. They just don’t work anymore and there is almost nothing concrete to identify signs of their “life.” Some experienced users suggest using programs for Qumo flash drives " R-Studio", or " CardRecovery" But this may not always be effective.
MicroSD A-Data recovery

In this case, little helps. Only “Paragon Partition” works most effectively with flash drives of this format Manager Free" First, the program will ask for formatting, and then create a new partition.

MicroSD Oltramax recovery
For them, regular full formatting using a special SD Card Formatter.

4. Restoring damaged MicroSD

It happens that when using the drive, an alarming message “Memory card is damaged” or something else may appear on your screen. The following programs will come to the rescue:
- Smart Data Recovery – will help you select the media and click the “Find” button, after which the necessary files that can be recovered will be searched.


- Recuva– after launch, click “Analysis” and wait for the process to complete.


- BadCopyPro– select Memory card, and click “next” twice.



The same operations can be performed on a tablet or phone on the Android platform. Other applications will come to the rescue here:
- GT Recovery for Android – select the desired item in the program and wait for completion;


- Wondershare Dr. Fone for Android– launch the program, select the required files.

5. Prevention

It is best to start using the flash drive correctly so that no bad problems occur with it. Here are some tips to help you avoid breakdowns:
1. Try not to drop the flash drive, hit it, bend it, or generally subject it to harsh physical impact.
2. Avoid various types of radiation, including X-ray machines and exposure to direct sunlight.
3. Do not touch the contacts with your fingers, and try to keep them closed at all times.
4. From time to time, completely defragment the flash drive and use it as often as possible - flash drives do not like to sit idle.
5. Create backup copies of the flash drive so that in case of malfunctions you can restore it.
6. Leave free place on the drive.
7. If the card is installed in a smartphone, tablet, or speaker, try to remove it from there less often.

I somehow fell into the hands of a flash with a Qumo driver. Common problem- does not format, does not open, shows file RAW system and 0 MB on disk. Well, I think now I’ll get even with her and quickly please the “lucky owner” of this device, since he was already planning to throw away this drive, I had to convince him that everything was not so bad and if we pray more often, maybe we’ll do it. The drives had to be restored more than once, so a pre-prepared plan of action was already outlined.

The first thing we decided to do was use the very useful HPUSBFW utility (the full name is HP USB Disk Storage Format Tool) - this utility is designed to help with USB formatting drive, despite the fact that it can also be formatted into the NTFS file system. It often helps, while standard means Windows can't handle it. But in our case, nothing worked, and in this particular program the error was of the “write protection” type (... write-protection) . Standard means Windows formatting XP and Windows 7 would throw a "formatting error" error or something like that. But this is not the time to worry about the first failure, fortunately it’s now USB Flash Disk costs little and everyone can afford to replace it quickly.

Next, a bunch of recovery programs were tested, such as JetFlash, Flash Doctor, PeToUSB and many others. I tried everything that came to hand, but there is no point in listing everything, since again there was no result. Therefore, when I was tired and quite fed up with restoring this device, it was decided to use a service utility, which was already 90% supposed to help and make the owner happy.

To find a service utility for your flash drive, you need to know which controller it runs on. In general, sometimes a simple name of the device and the Internet is enough to search for this information, but this time I disassembled the drive and saw with my own eyes what kind of controller it was, and besides, it turned out to be necessary to determine the memory chip.

So the device data:

Controller: SK6211

Memory chip: I29F64G08FAMC1 (wrote from memory, since I don’t have this flash drive at hand, its owner is in this moment enjoys her work, so the last 5 characters may differ...)

The service tool that will do the whole job for us will be called SK6211_PDT_20090828. This utility works with the SkyMedi controller, and we have exactly the same controller, as indicated by SK in its labeling. There is a manual for working with the program; finding it will not be particularly difficult. I definitely recommend reading it, because you won’t be able to cope without it, unless of course you’re using it for the first time. Everything would be fine: I read the man and recognized the memory chip, but the problem is that in the file SK6211BA_Skymedi Flash Support List _20090828.xls, which helps you find the Code Bank for your flash drive, there was no memory chip like mine. Therefore, after starting the program, try selecting the I64G profile, only after that click on the Auto LLF button... This is, of course, if your device is detected... Otherwise, you will have to lock your feet on the controller...

Good day everyone!

You can argue, but flash drives have become one of the most (if not the most) popular storage media. It is not surprising that there are quite a lot of questions regarding them: especially important among them are the issues of recovery, formatting and testing.

In this article I will present the best (in my opinion) utilities for working with drives - that is, those tools that I have used myself many times. The information in the article will be updated and expanded from time to time.

The best programs for working with a flash drive

Important! First of all, if you have problems with a flash drive, I recommend visiting the official website of its manufacturer. The fact is that on the official website there may be specialized utilities for data recovery (and more!), which will cope with the task much better.

For testing

Let's start with testing drives. Let's look at programs that will help determine some of the parameters of a USB drive.

H2testw

Very useful utility to determine the actual volume of any media. In addition to the storage capacity, it can test the actual speed of its operation (which some manufacturers like to overestimate for marketing purposes).

Check Flash

A free utility that can quickly check your flash drive for functionality, measure its real read and write speed, complete removal all the information from it (so that no utility can recover a single file from it!).

In addition, it is possible to edit information about partitions (if they are on it), make a backup copy and reanimate the image of an entire media partition!

The speed of the utility is quite high and it is unlikely that at least one competing program will do this job faster!

HD Speed

This one is very simple, but very convenient program for testing flash drives for read/write speed (information transfer). In addition to USB drives, the utility supports hard drives and optical drives.

The program does not require installation. Information is presented in a clear graphical representation. Supports Russian language. Works in all versions of Windows: XP, 7, 8, 10.

CrystalDiskMark

One of the best utilities for testing information transfer speed. Supports various media: HDD (hard drives), SSD (newfangled solid state drives), USB flash drives, memory cards, etc.

The program supports the Russian language, although running a test in it is as easy as shelling pears - just select a carrier and press the start button (you can figure it out without knowledge of the great and mighty).

An example of the results can be seen in the screenshot above.

Flash Memory Toolkit

Flash Memory Toolkit - this program is a whole set of utilities for servicing flash drives.

Full set of functions:

  • a detailed list of properties and information about the drive and USB devices;
  • test to find errors when reading and writing information to the media;
  • quick data clearing from the drive;
  • search and recovery of information;
  • backup of all files to media and the ability to restore from a backup copy;
  • low-level testing of information transfer speed;
  • measuring performance when working with small/large files.

FC-Test

A benchmark for measuring the real read/write speed of hard drives, flash drives, memory cards, CD/DVD devices, etc. Its main feature and difference from all utilities of this kind is that it uses real data samples to work.

Of the minuses: the utility has not been updated for quite some time (problems with newfangled media types are possible).

Flashnul

This utility allows you to diagnose and USB testing Flash drives. By the way, during this operation, errors and bugs will be corrected. Supported media: US and Flash drives, SD, MMC, MS, XD, MD, CompactFlash, etc.

List of operations performed:

  • reading test - an operation will be carried out to determine the availability of each sector on the media;
  • recording test - similar to the first function;
  • information integrity test - the utility checks the integrity of all data on the media;
  • saving a media image - saving everything that is on the media into a separate image file;
  • Loading the image into the device is similar to the previous operation.

For formatting

HDD Low Level Format Tool

A program that has only one task - to format the media (by the way, hard drives are also supported HDDs, and solid state drives - SSD, and USB flash drives).

Despite such a “meager” set of capabilities, it is not for nothing that this utility is in first place in this article. The fact is that it allows you to “bring back” to life even those media that are no longer visible in any other program. If this utility sees your media, try running it low level formatting(attention! all data will be deleted!) - there is a good chance that after this format, your flash drive will work as before: without failures or errors.

USB Disk Storage Format Tool

Program for formatting and creating bootable flash drives. Supported file systems: FAT, FAT32, NTFS. The utility does not require installation, supports USB port 2.0 (USB 3.0 - does not see. Note: this port is marked in blue).

Its main difference from standard tool in Windows for formatting drives - this is the ability to “see” even those media that are not visible regular means OS. Otherwise, the program is quite simple and concise, I recommend using it to format all “problem” flash drives.

Format USB Or Flash Drive Software

The utility will help in cases where staff program formatting in Windows will refuse to “see” the media (or, for example, it will generate errors during operation). Format USB Or Flash Drive The Software can format media into the following file systems: NTFS, FAT32 and exFAT. There is a quick formatting option.

I would also like to note the simple interface: it is designed in a minimalist style, it’s easy to understand (the screenshot is shown above). In general, I recommend it!

SD Formatter

A simple utility for formatting various flash cards: SD/SDHC/SDXC.

The main difference from standard program, built into Windows - is that this utility formats the media in accordance with the type of flash card: SD/SDHC/SDXC. It is also worth noting the presence of the Russian language, simple and clear interface(the main window of the program is shown in the screenshot above).

Aomei Partition Assistant

Aomei Partition Assistant is a large free (for home use) “combine”, which provides a huge number of functions and capabilities for working with hard drives and USB media.

The program supports the Russian language (but is still set to English by default), works in all popular Windows operating systems: XP, 7, 8, 10. The program, by the way, works according to its own unique algorithms (according to at least, according to the developers of this software), which allows it to “see” even “very problematic” media, be it a flash drive or HDD.

In general, a whole article would not be enough to describe all its properties! I recommend you try it, especially since Aomei Partition Assistant will save you not only from problems with USB drives, but also with other media.

Recovery programs

Important! If the programs presented below are not enough, I recommend that you familiarize yourself with a large collection of programs for data recovery from various types media (hard drives, flash drives, memory cards, etc.): .

If, when connecting the drive, it reports an error and asks you to format it, do not do it (it is possible that after this operation, it will be much more difficult to return the data)! In this case, I recommend reading this article:.

Recuva

One of the best free programs to recover files. Moreover, it supports not only USB drives, but also hard drives. Distinctive features: fast media scanning, quite high degree search for “remains” of files (i.e. the chances of returning a deleted file are quite high), simple interface, step by step wizard recovery (even complete beginners can handle it).

For those who will be scanning their flash drive for the first time, I recommend that you read the mini-instructions for recovering files in Recuva:

R Saver

Free* (for non-commercial use in the USSR) program for recovering information from hard drives, flash drives, memory cards and other media. The program supports all the most popular file systems: NTFS, FAT and exFAT.

The program sets the media scanning parameters independently (which is also another plus for beginners).

Program features:

  • recovery of accidentally deleted files;
  • possibility of reconstruction of damaged file systems;
  • recovering files after formatting the media;
  • data recovery using signatures.

EasyRecovery

One of best programs for data recovery, supports a wide variety of media types. The program works in all versions new Windows: 7, 8, 10 (32/64 bits), supports Russian language.

One cannot fail to note one of the most important advantages of the program - the high degree of detection of deleted files. Everything that can be “pulled out” from a disk or flash drive will be presented to you and offered to be restored.

Perhaps the only negative is that it is paid...

Important! About how to return deleted files in this program you can find in this article (see part 2):

R-STUDIO

One of most popular programs for data recovery, both in our country and abroad. A large number of different media are supported: hard drives (HDD), solid-state drives (SSD), memory cards, flash drives, etc. The list of supported file systems is also amazing: NTFS, NTFS5, ReFS, FAT12/16/32, exFAT, etc.

The program will help in the following cases:

  • accidentally deleting a file from the trash (this happens sometimes...);
  • formatting the hard drive;
  • virus attack;
  • in the event of a computer power failure (especially important in Russia with its “reliable” power grids);
  • in case of errors on the hard disk, if there is large number damaged sectors;
  • if the structure of the hard drive is damaged (or changed).

In general, a universal harvester for all kinds of cases. The only negative is that the program is paid.

Remark! Step-by-step recovery data in the R-Studio program:

Popular USB flash drive manufacturers

It is, of course, unrealistic to collect all manufacturers in one table. But all the most popular ones are definitely present here :). On the manufacturer’s website you can often find not only service utilities for resuscitating or formatting a USB drive, but also utilities that greatly facilitate the work: for example, programs for archival copying, assistants for preparing bootable media etc.

Note! If I have left anyone out, I suggest using the tips from the instructions for restoring the functionality of a USB drive: . The article describes in some detail how and what to do to “return” the flash drive to working condition.

This concludes the report. Good work and good luck everyone!


2024 gtavrl.ru.