How long does it take to restore a Windows 10 system? Windows System Restore

Due to the presence of viruses, driver or software mismatches, the OS may malfunction. If your Windows crashes, don’t rush to panic. The situation can be corrected by returning the state of files and programs to the moment when the PC was working properly.

While running OS Windows 7, 10 or 8, certain errors and problems may occur. As a result of such failures, starting the operating system again in operating mode becomes impossible. In this case, it is not at all necessary to do a time-consuming reinstallation of the OS. All you need to do is perform a system restore.

Recovering the OS using the recovery environment

When working we use the following scheme of actions:

1. Reboot the computer, press the F8 key while loading;
2. Troubleshooting;
3. System restore, selecting an OS restore point;
4. Click "Further" and again "Further";
5. Press the button "Ready", we reboot the system (in the Menu, select boot with the last successful configuration).

There are several methods you can use to get your OS running again. Some of them rely on rolling back to saved settings. Others simply clear the data.

You can “reanimate” the OS in one of the following ways:

• by selecting restore points;
• using the command line;
• through safe mode;
• using a recovery environment;
• using an image/boot disk.

Restoring the operating system using system “resuscitation” checkpoints is one of the most affordable, effective and popular options. To apply it, you need to make a series of clicks:

1. Panel "Start";
2. "System Restore";
3. "Further";
4. "Select a restore point";
5. "Ready".

With such an operation, problems with the computer will be corrected, changes will be canceled and the system will be returned to the operating state that allowed the PC to boot normally. There is no loss of data, files and documents with this type of recovery. All data is saved. The operation is reversible. You can roll back the system to a previous computer state and use a different restore point.

Many people wonder how to make a recovery point on their own (manually) in order to choose it in the future? To do this in the same menu "Start" - "System Restore" You can create such a point yourself at any time convenient and suitable for you. It will be saved indicating the current date, which you just have to remember.

From restore point

In computer engineering there is such a thing as a recovery point. These are saved PC settings. As a rule, saving occurs automatically with each successful OS boot. The easiest way to restore Windows 7 is to use this data.

Press F8 when your computer boots. This command will bring up a menu of system startup options. Next, you need to select the Last Known Good Configuration option.

Another method can be used. Go to the properties of the My Computer folder. Find the line System Protection, clicking on which will open the dialog box of the same name. Click Recovery – Next. We set a target date, indicate the disks that need to be fixed, and confirm the actions. After rebooting, the PC should work normally.

No restore points

You can fix problems with the OS even without restore points. To do this you will need to resort to the LiveCD program. You need to download it and burn it to a flash drive with the .iso extension.
Further all actions will take place in the BIOS. You need to configure booting from a flash drive. To do this, in the Boot section, select USB-HDD in the First boot device line.

Before proceeding directly with the recovery, copy all the necessary files to a removable disk. The LiveCD program provides a special menu for these purposes.

We will fix the system error using an archived copy. Connect the USB flash drive, open the Windows\System32\config\ folder. Files with the names default, sam, security, software, system must be moved to any other folder. In their place, transfer similar files from the RegBack folder and restart the computer.

The described method will only help if the problem is related to the registry.

Command line

You can resort to “reanimating” Windows 7 from the command line if the PC begins to freeze or works slowly, however, the system still boots. Enter the menu "Start" and using the right mouse button, launch the command prompt as administrator. Run the rstrui.exe command, which will open the system restore program. Click "Further". In the next window, select the desired rollback point and click again "Further". Once the process is complete, the PC should work normally.

There is another way to access the utility. Let's go to "Start". To open the command line, click "Run" and enter the CMD command. We click on the found CMD.exe file and wait for it to launch. Next, enter rstrui.exe in the command line and confirm the action with the Enter key on the keyboard.

It is not always possible to play it safe and create OS restore points in advance. Problems may arise that block the option of such “reanimation” of the PC. Then you can use another, no less effective and easy option - restoring the Windows system using the system itself.

We rely on the diagram:

1. Icon "My computer"- right mouse button "Properties";
2. "System protection";
3. In the new window click "System protection", recovery button;
4. "Further";
5. Select a restore point according to the date;
6. Specify the system disks to be restored;
7. We confirm the operations and reboot the system.

Restoring Windows 7 using Safe Mode

This method is preferred if the usual system boot is impossible. Then after pressing the PC power button on the system unit, hold down the F8 key to call "Start Menu". One of the "Menu" options is "Safe mode". Select it and press Enter on the keyboard. As soon as Windows boots, we carry out the algorithm of actions that we described earlier.

System recovery Windows 8/8.1

If you managed to start the OS, you can resume Windows 8 via "Options". Hover over the top right corner and enter them. Click on "Change computer settings" – . Chapter "Recovery" will offer several options:

1. "Regular recovery with information preservation".
2. “Deleting data and reinstalling the OS”.
3. "Special option".

Decide what exactly needs to be done. Next, follow the menu prompts.

If you choose the latter method, in the window that opens, click on the diagnostics item. You will be offered the following options:

• "Restore";
• "Return to original state";
• "Extra options". This item includes the ability to roll back to the desired resume point.

To resume Windows 8.1, press Win+R and call sysdm.cpl. In the system properties window in the tab "Protection" specify the required system drive. Click "Restore". Clicking "Further", you will be able to see a list of rollback points. Select the one you want and click "Search for affected programs". Changes that have been made to the PC since the selected moment will be deleted. Complete the process by clicking "Ready".

If you work with Windows 8, problems may occur, the Internet may not work correctly, etc. To fix this, you can use the classic recovery method through restore points.

Another option is a system rollback. To do this, open the menu "Start" - "Control Panel" - "Windows Update". Select an item "Removing updates". The same can be done using the command line.

So, in the list of updates that opens, we delete those from the moment of installation of which (we look by date) problems and malfunctions began. We delete unnecessary files and reboot.

You can perform a factory reset on Windows 8.1. Important files will not be affected during this operation. The method is effective, but to implement it, the OS needs to boot without problems. We use the algorithm:

1. Right side of the monitor - "Options";
2. "Change settings";
3. "Update and Recovery" - "Recovery";
4. "Recovery without deleting files".

If you cannot log into the system in the usual way, you must use the disk with the system. Load the installation disk, select "System Restore". Press the button "Diagnostics", And "Restore".

If you have problems with Windows 10, press Windows + Pause. Go to "System protection" and press "Restore" – "Further". Select the desired indicator and click again "Further". When finished, click "Ready". The computer will automatically restart and the changes will take effect.

One of the advantages of the “ten” is the ability to return the settings to factory settings. This helps avoid having to install the system all over again. To reset your data go to "Computer Settings" – "Update and Security" – "Recovery" – "Return the computer to its original state". Click "Begin".

You can take care of the possibility of a rollback in case of failure in advance. You can create resume points yourself or configure their automatic creation at the desired frequency. To do this, in the settings, in the Update and security item, select Backup service. Specify where to save copies, click Add disk. After selecting the device, the function will be activated.

You can restore your Windows 10 system again by using restore points. In this case, the system will be rolled back to the moment when it loaded smoothly and worked without failures. This recovery method is described at the beginning of the article.

If the OS does not boot, a warning table with a key appears on the screen "Additional recovery options". Click it and select "Diagnostics" - "System Restore". We select a Windows restore point, wait for the system to roll back and reboot.

If such operations do not help and the computer continues to work incorrectly, you can roll back to the basic settings. Some programs and utilities, personal PC settings will be reset, and personal data will be deleted.

This technique is used extremely rarely if the other options described above do not help. The algorithm of actions is as follows:

1. "Start" - "Selecting parameters"- tab "Updates and Security";
2. Paragraph "Recovery"- button "Begin";
3. We choose to delete all files or keep some of them.

Recovering the system after this will take 40-90 minutes.

Resuming using the installation disc

One of the radical methods of fixing the error involves using an installation disk. After launching it in BIOS, click System Restore. In the Troubleshooting section, specify the desired action. Next, follow the system prompts to complete the process.

If you switched to the new Windows 10, but for some reason you didn’t like it, you can roll back to the previous operating system that was previously installed on your computer. You can also roll back Windows 10 to factory settings or to one of the restore points if the system produces an error that you cannot solve in any other way.

Conditions for system rollback

There are two ways to roll back the system - reinstall it or restore it:

• the first method will require you to provide a license key, since the data that you previously had an activated system installed will be lost. When reinstalling, all information stored on the main disk partition will be lost;
• The second method is suitable for you if 30 days have not passed since the transition to Windows 10, since during this period the Windows.old folder is saved, which stores all the data necessary to restore the previous installed operating system. After a month has passed from the date of transition to the new operating system, the folder is automatically deleted, and the license from the previous system is finally transferred to Windows. That is, if you had a licensed Windows 7 and spent 30 days on Windows 10, then the tenth version will become licensed, and to install the seventh Windows you will need a new license key.

Rollback before 30 days have passed

There are several ways to restore a previous version of an installed system from the Windows.old folder. First try the standard method and system recovery, but if they do not suit you, then use the second option - through a third-party program.

Standard method

1. Open PC settings. Open computer settings
2. Go to the "Update and Security" block.
   Open the “Update and Security” section
3. Select the “Recovery” subsection. Go to the “Recovery” subsection
4. This subsection should contain the “Return to...” item. The version you can revert to is the same as the one you installed previously. Click on the “Start” button and follow the instructions that appear on the screen.
   Click the “Start” button to start rolling back to the previous OS

Through recovery

1. While at the “Login” step, when you need to select an account, hold down the Shift key on your keyboard and select “Reboot”.
   Hold down the Shift key and go to reboot
2. The recovery menu will open, select “Diagnostics”. Go to the “Diagnostics” section
3. Proceed to select advanced options. Let's move on to additional parameters
4. Select the “Return to previous build” block.
   Select the “Return to previous build” function
5. Select the proposed option - rollback to the previous installed system.
   Choosing where to roll back
6. Enter a password if you have one.
   Enter the password
7. Read the warning and confirm the action.
   Confirm the start of the rollback
8. Wait for the process to complete; it can last from ten minutes to several hours, depending on the performance of the computer and how many files need to be restored.
   We wait until the previous version of the OS is installed

Using a third party program

This method is worth switching to if you have a Windows.old folder with files from the previous system, but the “Return to...” section is not displayed in the computer settings. This happens sometimes, so you can follow these steps to use the files in the folder:

1. The third-party program is an image of the official application from Microsoft - Rollback Utility. Download this image, which weighs about 200 MB, from the official Microsoft website, and then write it to any free flash drive. You can do this using the built-in functions of Windows 10: right-click on the image, select “Mount” and indicate on which media you want to burn the image.
   Select “Mount” to begin the mounting process
2. 
   Press the Delete key to enter the BIOS
3. 
   Go to the Boot menu
4. 
   We put the medium first
5. Save the changes made to the BIOS and exit it; booting from the flash drive will begin automatically.
   Save the settings and exit the BIOS
6. When the program loads from the flash drive, go to Automated Repair mode.
   Select Automated Repair mode
7. Two systems will appear in the window: active and old. Select the one you want to roll back to and click on the Roll Back button. Instructions will appear on the screen, follow them.
   Select the system to which the rollback will be performed

After 30 days have expired

If you no longer have the Windows.old folder, then rolling back without reinstalling the system is impossible. Create installation media from the version of Windows you want to downgrade to by mounting the system image onto a USB flash drive. Boot from the created media and go through the installation process of the desired operating system.

Install the system by uninstalling the previous version

Please note that you will have to uninstall Windows 10, as you need to format the hard drive partition on which the installation will be performed, which means that the license key will need to be entered again. If you want to save the files that you managed to acquire while using Windows 10, then copy them to third-party media, and after the installation is complete, transfer them back to your computer.

System Restore

System recovery is not a rollback to the previous operating system, but to the last restore point. Points can be created manually, but by default they are created automatically. They are needed so that if an unsolvable error occurs in the system, you can roll back all processes and computer settings to the moment when this error did not exist. To use the point, follow these steps:

1. Launch your computer's Control Panel. Opening the control panel
2. Go to the "Recovery" section. Find it using the search bar.
   Go to the “Recovery” section
3. Run the recovery program.
   Click the “Run System Restore” button
4. If you have several points, then you can select the one recommended by the system, or any other, by proceeding to manually selecting a point.
   Select a recommended or other restore point
5. Wait until the system performs an automatic recovery. Once the process is complete, you will receive a notification that the system has been restored successfully. Done, now all the settings and parameters of the computer correspond to the properties that it had at the time the restore point was created.
   We go through the process of rolling back to a restore point

Video: Applying restore points

Via command line

If your computer does not boot in normal mode, you can put it into safe mode with command line support, and then run the rstrui.exe command at the command prompt. Executing this command will start the recovery process, and all other actions will be the same as the normal recovery described above.

Run the command rstrui.exe to start the recovery

Return to original settings

If your computer settings have been changed for the worse, then you have the opportunity to roll back all settings to default values ​​in a couple of steps:

1. Go to computer settings by holding down the Win+I keys on your keyboard, or through the search menu. Open the Settings application
2. Open the "Update and Security" section.
   Select the “Update and Security” block
3. Open the “Recovery” subsection.
   Go to the sub-item “Recovery”
4. Begin the process of returning your computer to its original state by clicking on the “Start” button.
   Click on the “Start” button to begin resetting to default settings
5. You can choose one of two options: remove applications along with settings, but keeping personal files, or remove everything on the computer, leaving a completely clean Windows with an empty hard drive.
   Choosing how to reset settings
6. Having chosen the rollback method, confirm the actions by clicking the “Reset” button. The reset process is performed automatically, wait until it is completed without interrupting the procedure.
   Click on the “Reset” button to start the process

Additional method

If the method described above gives you an error or does not allow you to reset settings for some other reason, then you can use a third-party program from Microsoft to achieve the goal:

Reset when the system is frozen

If, due to changes in computer settings, the system no longer starts, and because of this there is no access to computer settings, then you can recover without logging into the system, but for this you will need a recovery disk or bootable USB flash drive:

Recovery using the program

If the system encounters an insurmountable error, then you can restore it to its original state using a bootable USB flash drive and the official application from Microsoft:

1. Download and run the application from the official Microsoft website designed for installing Windows 10 - Installation Media Creation Tool.
   Download the Installation Media Creation Tool program
2. After launching the application, select the version of the system installed on your computer.
   Selecting system image parameters
3. When choosing an action, check the option “Create an installation flash drive” and go through the creation process to the end.
   We indicate that we want to create an installation flash drive
4. Turn off the computer without removing the flash drive from the port, start the power-on process and as soon as the first signs of power-up appear on the screen, press the Delete button on the keyboard to go to the BIOS settings. The key may differ, which one it will be in your case, depending on the motherboard model. But when the system boots, lines will appear indicating the key to start the BIOS.
   Use the Delete key to go to the BIOS
5. While in the BIOS, go to the Boot section or “Download” in the Russian version.
   Open the “Download” menu
6. Place the flash drive with the recorded image first in the boot queue. This must be done so that when the computer turns on, it starts loading not from the hard drive, but from your flash drive. If you have a newer BIOS version - UEFI, then in the first place you need to put a flash drive whose name begins with UEFI: “Media name”.
   Move the flash drive to the first place
7. Save the changes you made to the BIOS and exit. Loading from the flash drive will start automatically.
   Exit the BIOS and save the changes made
8. When the first installation program window appears, do not start the process; instead, click on the Repair you computer button.
   
9. Select the "System Image Restore" option. Done, wait for the system to recover from the installation media you created.
   Activate the “System Image Restore” function

What to do if these operations don't work

Rolling back to a previous operating system may not work if your Windows.old folder is damaged or lost. If the folder is unusable, then you have only one option - reinstall the system.

Restore may not work for the following reasons:

• The restore point is damaged, use another, earlier point to successfully roll back the system;
• if you are trying to recover through a third-party media, make sure that the correct version of the operating system is installed on it, and that it meets all the conditions: it has at least 4 GB of free space, formatted in FAT32 or NTFS format;
• if one of the recovery methods suggested above does not work, then try recovering via a bootable USB flash drive, returning the computer to its original state, or resetting the settings to default values.

What can you do if Windows 10 freezes during a rollback?

If you are convinced that the system is frozen - the process does not move for more than twenty minutes, then you need to manually interrupt the process. Press the "Shutdown" button on the computer case for 5-10 seconds until it turns off. If this does not help, then unplug the device and wait until it turns off. Such actions can lead to an error, so resort to them only as a last resort.

After the computer turns off, start turning it on and enter the recovery menu. Typically, the F2 key is used for this, but the button may differ on your motherboard model. Use the prompt that appears on the screen during startup to find the right button. Once you enter the recovery menu, follow the reset and rollback instructions above.

If you were unable to enter the recovery menu, or the process started through this menu also froze, then create installation media and restore the computer using a system image; this method is described in the “Recovery using a program” section. If this does not help, then reinstall the system, while formatting the disk on which you currently have frozen Windows installed.

How to get back after a rollback

If you rolled back to Windows 7 or 8, and then decided to go back to the tenth version of the system, then use the same method as you used before when you switched from Windows 7 or 8 to Windows 10. Update through the update center or an installation flash drive, creating it using the official program from Microsoft - Installation Media Creation Tool. You can update to the new Windows as much as you like, and then roll back to the old system, for example, using the Windows.old folder, and then update again to the tenth version of the system.

Updating to Windows 10

The transition between versions of Windows can be done either by updating, moving from the old system to the new one, or by rolling back, moving from the new system to the old one. To restore full operation of the system, it is not necessary to switch from one version to another; it is enough to reset the settings or restore parameters to default values ​​using built-in functions or bootable media.

Often, users of computers running Windows 7 encounter problems with the operating system. Problems with your computer usually appear when it slows down a lot and programs won’t open. Also, the computer may not start at all or may do so every once in a while.

The reasons that cause problems in the performance of the operating system can be very different. For example, if a computer gets hit virus, it can damage system files. Also, difficulties with the PC may appear during installation low-quality software, which can damage the structure of system files. To solve a problem with the performance of a computer on Windows 7, you need to roll back to the previous one. recovery point.

To protect the OS, Windows 7 uses restore points that the system periodically creates. Essentially, restore points are previous state of Windows 7 system files. To help Windows 7 PC users, we have prepared material that will describe the detailed process of restoring the system in various ways.

Restoring performance in a busy seven

If your computer running Windows 7 boots, but the system is not stable, then it's time to roll back to a previous restore point. First of all, we need to get to the window where we can call up the system recovery options. To do this, open the program “” by pressing the key combinations Win + R, through which we enter the following command: systempropertiesprotection

A window should open in front of us “ Properties of the system" on the " tab System protection" You can also get to this window in the standard way through the menu “ Start". The next action is to press the button Recovery….

After clicking, the System Restore window will open. It will ask you to restore the system using a recommended access point or select another one. We'll stop at recommended restore point.

This window requires confirmation for the selected recovery. To confirm, click the Finish button.

This button will bring up a message warning that after the recovery procedure it will be impossible to return to the previous parameters of the seven. By clicking Yes in the message, we will begin restoring the Windows 7 system.

If the process of returning to the previous state occurred without errors, a corresponding message will be displayed.

If you are unable to roll back to previous settings using the recommended point, you should select the point that was created later than the selected restore point Windows 7 systems. I would also like to note that to perform this operation you will need special privileges. That is, when you log in, you must select an account admin and enter a password for it.

Restoring the computer's functionality when the OS starts

If your PC is running seven at all is not downloading, then you can start the operating system in safe mode. After the BIOS start window appears, press F8 on the keyboard (for laptops there may be another key, for example, Del or one of the function keys). This action will cause menu of alternatives loading seven.

In this menu, select the item “ Safe mode" and continue by pressing Enter, after which the system will start in safe mode.

If the system successfully started in safe mode, then start restoring the seven, as shown in the previous example. In this mode to ensure maximum security many functions disabled OS, including the Windows Aero graphical interface. This is what the running program “” with the command “” will look like systempropertiesprotection"on a system running in safe mode.

We return the computer to functionality using an installation disk or bootable USB flash drive

If the previous two examples do not help you, then you will need to restore seven installation disk or flash drive. For computers that do not have an optical drive, you need to use a bootable USB flash drive with the OS. A bootable USB flash drive can be created using special utilities. The most popular utilities for this purpose are Windows USB/DVD, Download Tool And Rufus.

Boot from the installation disk or via a USB flash drive. In the installer start window, click Next and proceed to the next window.

In the window that opens to create an image, indicate the location to save it and click Next.

In the window that appears, all that remains is to click the Archive button, which will start the image creation process.

In the window that opens, select the storage “ Acronis Cloud».

As you can see, the entire computer is selected as the backup source. Therefore, in the schedule we set, a backup copy of the system will be created in cloud storage " Acronis Cloud».

For an example of recovery, let's take an archive copy not from the Acronis Cloud cloud storage, but from the hard drive. If you have created a backup copy on your computer, then Acronis True Image 2016 will find her himself.

So we press the button Restore your computer, after which the program will completely restore the system to the state it was in when the backup was created. Also, if you cannot start Windows 7 on your computer, Acronis True Image 2016 There is a boot image for this that can be burned to disk.

The example shows that launching a boot disk Acronis True Image 2016 Using the required BIOS mode is not at all difficult.

Let's sum it up

In this article we have discussed almost all the methods and parameters system recovery. We also looked at ways to restore the seven using alternative software and using an antivirus. Which method to choose to restore Windows 7 depending on the situation is up to you.

To summarize, I would like to note that they mainly disrupt the operation of the OS viruses and experiments with different illegal software. Therefore, so that you do not have to constantly restore the system, use only proven and licensed software, and also use reliable comprehensive anti-virus protection.

I would also like to note that the examples discussed in the material will work not only on Windows 7, but also on more modern operating systems, such as Windows 8 And 10 . And we, in turn, hope that our material will allow you to properly restore Windows 7 and you can confidently say that I can perform a system restore.

Video on the topic

Your computer won't boot, what to do? During operation, this is possible due to the harmful effects of various viruses, your erroneous actions when operating the device, or the use of incorrect drivers. But don’t despair, let’s learn to get out of this unpleasant situation with dignity.

You need to insure yourself for the future against sudden problems using the recovery and backup functions built into the system. Thus, you can restore Windows 7 without using third-party special programs, even when it is impossible to load “System Recovery Options” and the F8 key has no effect during the boot process.

So let's learn about insurance.

It is known that Windows 7 OS is equipped with a powerful tool " Recovery Environment", which is created automatically when installing this operating system. This happens in a hidden section containing five additional tools for solving problems with malfunctions and problems.

Remember that if you master these recovery tools well, there will be no need for additional paid data backup programs.

The recovery tools are launched by pressing the F8 key, which must be pressed immediately after starting the computer. The “Additional boot options” menu will appear on the screen:

• Safe mode;
• Safe mode with loading network drivers;
• Etc.

Select “”...

... and we get to the “” menu. Just what we need. We have the opportunity to select the “System Restore Tool” we need from the five presented:

Note: During installation of Professional or Ultimate OS, a partition with the recovery environment is created automatically in the Recovery folder located in the root of the C: drive. In the Disk Management window, you can see a hidden separate partition of the hard drive with a capacity of 100 MB, which is designed to store the BCD configuration boot files and the system bootloader in the form of a bootmgr file. To see these resources you need to go to Computer -> Management -> Disk Management. This section categorically cannot be deleted, otherwise you will not boot the system.

There are times when there is no partition with the recovery environment, when you press the F8 key, you see the “Advanced boot options” menu without the “Troubleshoot your computer” item. What to do?

You need an installation disk with Windows 7 OS. Start loading the original disk and select the “” item:

The “System Recovery Options” menu will appear on the monitor:

However, if the original installation disk is missing or is damaged, then the “Windows 7 Recovery Disk” may be a solution.

Note: Looking at the screenshot, you see another hidden partition with a capacity of about 10 GB, which also cannot be deleted. In this case, we are talking about a laptop and its factory settings are stored in this section. This is another system recovery option.

So, in the menu for Selecting a recovery tool, let’s try to figure out the “ Startup recovery" We click and see that the problems that have arisen are analyzed and then eliminated. The computer warns that problems have been found in the settings and you need to select “Fix and restart.”

Now let's look at the "" tab. This function will help you select a system restore point created earlier. It works if the function was not disabled during system settings. There is a rollback to a time when the system was functioning properly.

The next option is the "" tab. If you use this tool skillfully, there is no need for paid programs to backup data. This is a real help if you don’t have the original installation disk with Windows 7 or if you accidentally deleted the partition with the laptop’s factory settings.

There are also problems when the virus prevents the operating system from loading. An excellent way out of this situation would be to create an archived image of your system on your hard drive, which was created when you installed Windows 7 on your computer earlier using the “System Image Restore” function. It must be protected.

In conjunction with the “Windows 7 Recovery Disk”, the image will help you quickly restore the OS if the “Advanced boot options” menu does not load.

So, Start -> Control Panel — > .

Select the "" tab:

Under it, select “Local disk for archive storage.” The best option is when it is possible to place it on another hard drive, without an operating system installed.

Click “Archive” and the process begins.

The created archive with Windows 7 will look something like this:

Having such an archive, you can deploy it very quickly if necessary. And if you have the same archive copied on a portable hard drive, then you will doubly protect yourself from troubles.

Now, if it is impossible to start Windows 7, we activate “ Recovery tool» by pressing the F8 key on the keyboard immediately after turning on the computer. In the “Additional download options” menu that opens, select “”:

Then select “”...

...and in the menu that appears “ Use the latest available system image».

Well, another option for system recovery is “ Recovery disk" On this disk we write recovery tools to fix OS boot problems or use it to restore the system from a previously created backup copy.

Let's create such a disk. To do this, go to “”...

...and in the menu that appears, select “”...

...insert the DVD into the drive and click " Create disk».

Place the “” created in this way in a safe place.

To restore Windows 7 from the Recovery Disk, you practically don't need any other tools. To troubleshoot problems, you need to set the priority disk drive in the computer’s BIOS, insert the disk and restart the computer.

This disk will help you avoid completely reinstalling the operating system from scratch, which will destroy all data and information in the installation section, and this is very undesirable. With the disc you will simply restore the Windows 7 boot process.

Good luck to you, I hope this article will help you solve your problems.