Turn on the PC in safe mode. Enable and use Safe Mode on Android


PC users often encounter a problem when the operating system begins to freeze mercilessly. If you have a lot of utilities and drivers installed, it can be quite difficult to figure out what is causing the crashes. Fortunately, the developers have provided a solution to the problem: you will need to run Windows 7 safe mode.

Safe Mode Features

(safe mode) includes loading basic services and drivers, without which Windows will not start at all. All non-essential services and programs will not be launched, which greatly increases the chance of successful loading of the OS. Also, if you switch to safe mode, you can use simpler methods to identify problems related to the incorrect operation of Windows components and perform system diagnostics. Therefore, another name was assigned to it; it is also called the diagnostic mode.

Booting Windows 7 in safe mode will allow you to determine at what level the problem occurred. If after startup there are no failures, then the reason needs to be looked for in the downloaded files. Run the programs one by one to find the culprit.

Entering safe (diagnostic) mode in Windows 7 will help clean your computer from viruses. If the system is heavily infected, the antivirus may not be able to cope with the problem during a normal boot. In safe mode, you can also install an antivirus program if it has not been downloaded.

In particularly critical situations, Windows does not boot in the usual way. Then you can perform a system rollback through safe mode. Select a restore point at which the system functioned without failures. The computer should return to normal operation.

Before starting work

Before you enter Windows 7 Safe Mode, you need to check if USB is supported in the BIOS. If this feature is turned off, you will not be able to use your USB keyboard and mouse, even if the devices work normally without any problems.

  1. Go to BIOS settings. To do this, you need to restart your computer. When the BIOS logo appears, you need to press a certain button. Most often this is Delete or F1, but it all depends on the manufacturer. The required key is usually indicated at the bottom of the screen. But be careful: the splash screen only appears for a few seconds.
    The appearance of the BIOS may differ from what is shown below.
  2. Find the "" tab.
  3. We check that USB compatibility mode is enabled.
  4. Click "". Windows will continue to start normally.

Now USB devices will work even before the OS starts.

Login during system startup

Restart your computer. When the BIOS logo appears on the screen, press and hold F8. Sometimes the key may not work. If everything is fine in the BIOS settings, try the combination Ctrl + F8 or Shift + F8.

You need to be in time before the Windows logo appears, otherwise you will have to start the procedure again. If you do everything correctly, a signal will sound and “ Additional boot menu", the opening will take some time.

Using the navigation keys we can select the appropriate option:

  • safe mode- graphical interface with basic programs;
    • - the seven will launch the drivers required to access the Internet;
  • with command line support- instead of the usual graphical interface, command line mode will be activated. This download is suitable for IT specialists. Regular users are not recommended to boot Windows this way.

We choose the first or second option, based on the need to access the Internet. But be careful: protection means usually do not work in safe mode and you cannot always enable them manually. So it’s better to opt for the first download method.

A window for downloading files will appear. This will take a few seconds.

So now our computer is in safe mode. The screen resolution became low, and the screensaver changed to a black background. Help immediately opens, where you can learn about enabling and operating features in diagnostic mode.

However, there are some disadvantages here. The BIOS logo disappears very quickly, and users simply do not have time to press F8 in time. In addition, on a laptop it is not difficult to immediately go to the additional boot menu. But on a desktop computer it often does not open or will open only once every ten attempts. The exception is when starting after an emergency shutdown.

Therefore, the question arises: what to do in this case, how to enter safe mode in Windows 7. Fortunately, it can be turned on in another way.

Launch from the system

This is an alternative option on how to quickly enable safe mode in Windows 7. The advantage of this method is that it almost always works and there is no need to “catch” the treasured F8.

  1. Press the combination Windows Start menu + R. A command prompt will open. Enter msconfig and click OK.
    Or enter the command in the search menu bar Start.
    " system configuration».
  2. In the " Are common"check "".
    3. " and mark "".
  3. Windows 7 prompts you to select options. We note “ Minimum"- the main programs will start without network drivers.
  4. The system will prompt you to reboot - confirm.

The PC should now boot into Safe Mode.

We looked at how to start safe mode in Windows 7 without logging out. It is especially important here that the BIOS supports USB. In the first case, safe mode is selected before the system starts. Accordingly, if you are using a USB keyboard, the F8 key simply will not work and the standard startup will begin. But when launched via the command line, the diagnostic mode opens from the Windows environment. If the keyboard and mouse have USB connectors, the user will encounter an unpleasant situation: safe mode is enabled, but the main input devices are not responding. You will have to exit through the emergency shutdown.

How to exit diagnostic mode

As a rule, to exit safe mode, it is enough to reboot the system. This can be done using standard methods.

Via the menu Start
or via the key combination Alt + F4.

Windows should return to native mode. But sometimes the reboot stubbornly refuses to start. Then safe or diagnostic mode in Windows 7 can be turned off within the system. Essentially, we will come out of it the same way we entered it.


After rebooting, normal mode will turn on.

Of course, safe mode will not necessarily solve the problem. The computer may slow down due to heavy processor load. If you enable safe mode on Windows 7, the load will be significantly reduced and the system will start working well. But after a normal boot, crashes will appear again. Then you will have to clean the startup. However, this is an indispensable assistant in case of problems or problems starting the system.

Video on the topic

What is it for?

Sometimes, after installing new software or as a result of exposure to viruses, the normal operation of Windows 7 is disrupted. Due to abnormal behavior of the OS, it is sometimes quite difficult to detect and eliminate the cause of its occurrence. This is where safe mode can help (in non-Russian versions of the system it is called Safe Mode). In some situations, Windows 7 automatically enters it during its startup after the PC freezes. However, more often the user himself has to boot Windows 7 in safe mode. What kind of mode is this, and how to start it?

Safe Mode is designed to diagnose and determine the cause of abnormal operation of the OS. It differs from normal system startup in that applications and drivers installed after installing the operating system will not be loaded. At the same time, it becomes possible to remove a virus, or an application that cannot be removed in the usual way, or a driver that conflicts with other equipment.

1st way to boot into safe mode

When you turn on your PC, without waiting for the OS logo to appear, press and hold the F8 key. In some laptop models, one of the function keys F1-F12 may be used for this. In this case, a menu of additional boot options appears on the screen, looking like:

The first three options refer to the desired option, but you should choose the first one - highlighted in white in the picture. This is done with the arrow keys, after which you need to press “Enter”. The system will start, after which a black window with a resolution of 640x480 pixels will appear, and the words “Safe Mode” will be located in the corners of the window.

The method described above is only valid if only one OS is installed on the PC. Otherwise, you will need to press F8 twice to launch Safe Mode. The first press will cause a boot loader message to appear indicating which system to boot. You should also select it using the arrow keys, press “Enter” and immediately press F8 again. The above window will appear with additional launch options.

The second way to launch Safe Mode

This method can be used when Windows 7 is already loaded. It consists of performing the following steps:


Most likely, neither in Windows 7 nor in the XP version, you will not have to boot into this service safe operating mode very often. Nevertheless, it is rare, as they say, but aptly, to do this. Therefore, such a possibility should always be at hand, and you should not leave this task unsolved - the system does not enter safe mode.

Why might you suddenly need to turn on “safe-mode”:

  1. If, suddenly, during a normal boot, a program starts that disrupts all further work. In safe mode, this program will not start from the Startup folder or from the registry. You are given the opportunity to delete the program launch and boot again normally.
  2. If you have installed an unsuccessful device driver, which also does not allow you to log into the system normally, you can enter “safe-mode”, when only simple drivers are installed, and remove the bad one.
  3. If the system does not work normally due to errors in the registry, you can open the registry in safe mode using the same utility included with Windows, delete unnecessary settings or entire sections and re-enter the already working system.
  4. In the end, as a result of some serious failure, after an emergency, abnormal exit from the system, the next time you boot, the system itself may not automatically boot the computer after turning it on in the usual way, but will offer you to select the boot menu, the most important item in which will be safe .

We draw attention to another important factor - when loading this “service” mode, the system files autoexec.bat and config.sys do not start.

Booting into safe mode can be done from the boot menu if you hold down the F8 key after activating the boot of the laptop after turning on the power.

Thus, if your laptop does not boot in disassembled mode, this is a reason to take action to correct the error, which means that there is a glitch in the system that requires elimination.

First simple steps

All actions to restore access to safe mode can be collected in one global recovery process. To do this, through the main menu, click the “Start” button, go to “Control Panel” and select “System Restore”. Click on the “Yes” button and wait for the result. Upon completion of the process, you need to start the computer again “from scratch” and try using F8 to get the boot menu.

Another thing is if the system is basically inaccessible to you, you cannot boot in normal mode. The reasons for this may be:

  • damage to the laptop file system;
  • hardware failures;
  • power failures;
  • the presence of a global virus attack at the CMOS or registry level (changing boot parameters or disabling information about safe mode).

Global reasons

Firstly, it is almost certainly impossible to avoid moving the system to a laptop (or desktop PC, of ​​course). Moreover, we recommend doing this by formatting the system disk on which the system previously stood. Hence the conclusion - you need to skillfully organize the storage of information on your computer, we offer the best option:

  1. On the system one (C:, and there is no need for unnecessary frills) we store the system itself and all installed programs - for this, with skillful work, when you know what you want, 200 GB is quite enough.
  2. On the “user for business” (D:) - all the information on the work: documentation, tables, graphics, developments - it’s better to allocate more here - 300 GB.
  3. On the “user for the soul” (E:) - all the music, movies, photos - here 100 GB is a lot, although, of course, depending on who you are, it all depends on why this very laptop is needed in the first place.
  4. On the “installation” (F:) - all installations - 100 GB.
  5. On the “backup” (G:) - 100 GB for every fireman to transfer information, sometimes it is necessary.

Of course, one can argue about the given volumes, but it doesn’t hurt to listen to this idea - “C - and everything else.” Now, if you are rearranging the system, you can safely format the system disk. After formatting, you get a completely clean disk, you won’t have a single program left, but you have them on the “installation” disk, but you haven’t lost your work for the last year - it’s all on D.

Often the problem when safe mode does not turn on is associated with the influence of viruses, so it is best to format the entire hard drive, but here you will already need to solve the problem of backup copies (by the way, this problem for unorganized, rogue users has again been heavily talked about in connection with this virus WannaCry, but this, as they say, is a completely different song, but oh, what a loud one).

Frankly speaking, all distributions allow you to restore from the last point of its image. But this is not recommended. Firstly, often such an opportunity is a simple bait, it just doesn’t work - it will open, it will start, but after 5-10 minutes it will “say”: sorry, I can’t. And then, if you have not found out the reason for the impossibility of working in safe mode and restoring “from the point” is useless, because the viruses all remain untouched “like pieces of glass” (and the fact that this is their business is 40 percent, for sure).

Using special utilities

If you are not satisfied with reinstalling the system one way or another, then you can use a special utility, of which there are many on the software market. All these utilities require very careful attention; not all of them work perfectly, but they can solve the problem of returning work in safe mode.

AVZ program window

  1. In the window that opens, select “File” and “System Restore”.
  2. A window opens in which we find the line “Restore boot settings to SafeMode.”
  3. Exit the window using the “OK” button.
  4. The program restores the registry branches responsible for protected (as our “safe” mode is also called).
  5. Upon completion, we restart the computer and try to call up the safe mode of Windows XP (or any other, the utility works in any).

As for specific systems, you can use a configuration change to resolve the issue when Windows 7 Safe Mode does not start. For this:


Among the programs that can also solve the problem of starting a safe one, we note SaveModeRepair and SafeBootKeyRepair. They allow you to restore the registry branches responsible for normal and full loading.

If you have Windows 10

In light of the latest modifications of Windows 10, which Microsoft is persistently offering on the market, it is very important to turn to Win10, especially since it has significant features. These features also affected the problem under consideration. Thus, you need to enter Windows 10 safe mode in a special way.

If the system does not boot, then safe mode can be started with a system image that was previously recorded on the flash drive from which you will need to boot (let’s not forget about the purpose in the BIOS), while:


But we warn you: errors associated with the inability to boot into “SafeMode” can be so serious (which happens more often) that the only way to restore full operation of the computer, regardless of the OS version, is to reinstall it. Therefore, always keep the distribution kit at hand.

Safe Mode in Windows 10, as in any other versions of the OS, is a convenient tool for solving problems with the operating system. By running in Safe Mode, the user can get a clean boot into Windows, avoiding the automatic launch of various software such as drivers, startup utilities, and harmful viruses. In this state, the operating system will be ready to fix and diagnose all kinds of problems. In addition, safe mode significantly improves the effectiveness of virus removal.

Unfortunately, in Windows 10, the ability to quickly enter safe mode using the F8 key was removed, and the path to launching safe mode itself slightly changed its location, so many new and experienced OS users simply cannot find how to do this. In this article, we will learn about the most convenient ways to launch Safe Mode in Windows 10.

This method is one of the easiest and simplest, so it should be discussed first:

Step 1. Open the button "Start", left-click on the icon "Shutdown", after which a window with three items will open. Press and hold the key "Shift" and select the item.

Step 2. After these steps, the computer OS will go into diagnostic mode, where you need to select the middle item "Diagnostics".

Step 3. Now you need to select the item "Extra options".

Step 4. The next window will have many options from which you need to select "Boot Options".



Step 6. After the reboot is complete, a window will appear asking you to select the OS boot mode. Various variations of safe mode are presented in paragraphs 4-6. Select the desired item and go to safe mode.


Starting Windows Safe Mode via the msconfig command

Another way to start Safe Mode is with the msconfig command. To start this, you need to follow the following steps:

Step 1. Right-click on the “Start” button and select "Run".

Step 2. In the window that opens, enter the command msconfig and confirm the action by pressing the “Ok” key.


Step 3. In the window that opens, select the tab, then select the desired OS (if there are several of them), and also check the box next to “Safe Mode”.

It is worth noting that this item has several additional modes, from which you need to select the one you need.


By pressing the “Ok” key we confirm the action.
The next time you boot the OS, it will automatically go into safe mode.

Entering Safe Mode Using the Command Prompt (Windows Power Shell)

The third way to start Windows 10 Safe Mode is to use the Command Prompt.

Step 1. Open the command line by right-clicking on the button "Start" and selecting the item "Windows Power Shell Administrator"(Command line administrator).

Step 2. In the window that opens, you must enter bcdedit /copy (current) /d “Safe Mode” and confirm the command by pressing the Enter key.


Step 3. Close the command line and go to the menu msconfig, as was done in the previous method.

Now this menu has a new item “Safe Mode”, for which you should set the parameters shown in the screenshot.


Loading Safe Mode through the Recovery and Security menu

There is another convenient way to start Safe Mode in Windows 10. To use it, you need to follow these simple steps:

Step 1: Open "Windows Settings" .

Step 2. In the window that opens, select the item "Update and Security".


Step 3. Open a tab "Recovery" and press the button Reboot now in the Special download options section.


Step 4. When the OS boots, a window similar to that described in the first method will open.

Safe Mode is a convenient tool for removing viruses and unnecessary program components that cannot be removed in normal Windows 10 mode.

Safe Mode is a special Windows startup mode that is used to troubleshoot operating system problems. In safe mode, most drivers and programs do not load, autoload is disabled, and only what is necessary for Windows to run. This mode is useful for troubleshooting problems caused by installing or updating programs and drivers, which can lead to the computer not working properly (freezing, slowing down), as well as Windows starting normally.

Many users, when Windows malfunctions, immediately begin to reinstall the system or look for a specialist who could do this. But the problem can be solved simply, and by yourself, just restart the computer in safe mode and look at the latest installed programs and drivers, which could have failed, and remove the latest ones.

It’s very easy to determine whether you’re booting into safe mode – the “Safe Mode” message appears on the display of your laptop or PC in the corners of the screen.

There are several ways to boot your computer in safe mode and in all Windows operating systems; we will tell you how to do this in versions 7, 8/8.1 and 10.

Booting Safe Mode from the Operating System

The easiest way to load Safe Mode is to use the System Configuration program while booted into the Windows 7, Windows 8/8.1 or Windows 10 operating system.

To do this, click the START button and select the Run menu item or use the keyboard shortcuts Win + R. In the window that appears, enter the command: msconfig and press Enter


The System Configuration program window will open. Select the tab and in the "Download options" check the box Safe mode, click OK


Now confirm the reboot by clicking the appropriate button

After which your system will reboot into safe mode.

After fixing the problems, do not forget to restart the program and uncheck the boot options. Otherwise you will always boot into Safe Mode

In the operating system Windows 8/8.1 and Windows 10, there is another way to load safe mode. To use it, click on the On/Off button. power on the login screen or in Windows 8/8.1, move the mouse to the upper right corner of the desktop and select the Settings button, and then the power button icon, in Windows 10 - START and



The computer will reboot and a service screen will appear where you need to select the Diagnostics option



In the window that appears Extra options, select Boot Options


We are asked to reboot for further selection, click Reboot


After the reboot, a window appears in front of us with a choice of boot options.
In Windows 8 we select Safe mode and press Enter


In Windows 8.1 and Windows 10, to boot into Safe Mode, press the number 4 or F4 key on your keyboard


Your Windows 8/8.1/10 computer will boot into Safe Mode.

Booting into Safe Mode Using the Keys

It happens that a laptop or PC cannot boot in normal mode at all and to get into Windows safe mode you need to press and hold the F8 key just before starting the operating system, as soon as the image appears on the screen, sometimes you need to use the Shift + F8 key combination

From the Windows 7 start menu, select

In Windows 8, 8.1 and 10, go through the procedure that .

Now you know how you can boot your computer and laptop into Windows safe mode.


2024 gtavrl.ru.