Managed wifi beeline. Setting up a router on the Internet from Beeline

Setting up a D-Link 320 router

Setting up a Beeline router

Setting, connecting the router online and what they eat it with.

What should you consider when setting up and connecting your router?

A router is needed to unite a group of computers into a network including Wi-Fi and connect this group to the Internet, and for this you need to configure it.

Firstly:

Routers are released different manufacturers: 3COM, Allied Telesyn, ASUS, Cisco, D-link, HP, Linksys, NetGear, Planet, TP-LINK, TRENDnet, Zyxel, etc. and so on. Each manufacturer usually has its own appearance Web interface.

Secondly:

Routers are different! Type LAN connections, ADSL (basic). In fact, there are many more parameters.

Third:

You are planning to connect several computers, you need to at least know the basics of setting up networks.

Fourth:

It is necessary to take into account the Internet provider and what routers it recommends for connecting and configuring its line. Each provider has different settings Internet connections.

All this means that setting up a router is not so easy, despite the fact that all providers usually describe the scheme by which the router is configured.

Setting up the router includes:

1. Setting up the connection of the router itself.

2. Configuring network cards of connected computers.

3. Setting up Wi-Fi, if available in the router.

4. Setting up Wi-Fi on a computer or laptop, if available.

5. Configure routing if necessary.

6. Configuring incoming and outgoing program ports if necessary.

All transfers may include a number of parameters necessary for correct setting and router operation.

If you were unable to configure and connect the router yourself, CALL A ROUTER SETUP ARTIST! We configure all router models!

Instructions for WiFi settings routers for Beeline (Corbina)
Setting up a D-Link 320 router

Setting up a Beeline router

In this article, we will tell you how to set up a D-Link DIR 300 - 320 router for an Internet connection with Beeline “Beeline” (Corbina)…

Setting up a Beeline router

1. Connect network cable Your computer into any of the 4 LAN ports of the router.

The cable that our installers brought to your apartment must be connected to the INTERNET port.

Open your browser and enter address bar 192.168.0.1.

The following window should appear:

Enter in the “Username” field: admin, leave the “Password” field empty.

In the third field, enter the characters shown in the picture (in your case, the characters may differ from those shown in the screenshot). Click the “Login” button.

2. The router’s web interface window will open in front of you; to start setting up the connection, click the “Manually set up an Internet connection” button.

3. The “Connection Settings” window will open.

In the “Internet connection in use” field, select Russian L2TP (Dual Access).
Check the box next to “Dynamic IP address”.
In the “IP address/Server name” field, enter tp.internet.beeline.ru.
In field " Account L2TP" and "L2TP Password" you need to enter your username and password respectively.
The MTU field value is 1460
Select the “Always” connection mode.

4. Wait until the router saves the settings, after which the connection will be established automatically.

5. Now let's set up a wireless network on your router.

To do this, select the “Installation” section, and then “Wireless network installation”.

Click on the “Settings” button wireless connection manually".

6. The “Wireless Network” settings window for your router will open.
In the "Wi-Fi" section Protected setup» Uncheck the box next to “Enable”.
Next, in the “Wireless Network” settings section, arrange the items as shown in the figure:

Enable wireless network: check the box.
Wireless Network Name: Enter the desired name for your wireless network in this field.
Turn on automatic selection channel: check the box.
Transfer speed: best available.
Enable WMM: uncheck the box if present.
Enable Hidden Wireless: Uncheck the box if present.

Go to the “Wireless Network Security Settings” section.
Security Settings: Select “Enable WPA/WPA2 Encryption (Advanced)”
In the “WPA/WPA2” section, you select the encryption options for your wireless network.
For Cipher Type, select TKIP.
PSK/EAP: You need to select PSK.
In the Network Key: field, enter the password to access your wireless network.
Click the "Save Settings" button.

Congratulations, your router is completely ready to work on the Beeline network.

This article is taken from open sources. Link to article: http://www.telemaster-msk.ru/polezno/internet/internetbeeline.html

Every user would like to receive best services and use the Internet at the highest possible speed. But not all important nuances and the details in this matter depend solely on the provider. It can only provide the basic connection conditions specified in the service contract. The subscribers themselves must take care of the rest. And not last place In ensuring the quality of communication, the router for home Internet Beeline ranks.

Incorrectly selected equipment can reduce the capabilities of users who have paid for even the most expensive, and therefore high-quality and high-speed tariff plans.

But how to choose the right technology so that not a single Mbit is wasted? What should you pay attention to and which model should you prefer? It is almost impossible to answer the questions posed without preparation. But, if you thoroughly study the information on the topic mentioned and consult with experts, it turns out that finding the optimal solution is not as difficult as it initially seems.

The main criterion for choosing the right router is the device’s compatibility with the Beeline network. Without meeting this requirement, its use will be impossible, and the purchase of the device itself will become useless. In addition to the mentioned condition, you need to think about:

• desired speed Wi-Fi distribution and the breadth of the channel’s work;
• permissible number of connected devices;
• device interface, presence of a USB port;
• operating frequency range;
• size and appearance of the equipment;
• individual technical characteristics.

In this case, the most important, in addition to compatibility, of the listed selection criteria is the speed of information transfer. It is this factor that determines the loading time of sites and portals, the use virtual services, watching videos and the quality of video games.

The least significant thing is the appearance of the equipment. It affects the visual impressions and the organic arrangement of equipment in the house. The design does not affect the reliability of the device in any way, so it is the last thing you should pay attention to.

You should not deliberately ignore Beeline's offer. The provider offers clients wide choose equipment capable of satisfying the needs of most subscribers. You can get acquainted with the range of equipment available for purchase in communication stores telephone company and on the official portal mobile operator. In the second case you will need:

1. visit ;
2. switch to the “phones and gadgets” section;
3. Select from the options available the tab associated with ;
4. switch to the subsection dedicated to routers.

It features more than ten devices, including special sockets and signal amplifiers. At the same time, the equipment offered by the operator is produced by three companies:

• TP-Link;
• Alcatel;
• last option - wifi router s Beeline.

Branded devices have the greatest variety. Routers differ in models, appearance, color and operating parameters. But the final choice in any case remains with the user, who must personally decide which option will be the most convenient.

Recommended routers for home Internet Beeline

The list of devices distributed by the operator coincides with the list of recommended equipment, since commercially available equipment is already synchronized with the services mobile company and checked by Beeline specialists. The main advantage of using it is convenience. Subscribers will not have to think about setting up and preparing their purchase for use. It is enough to connect and turn on the device for it to start working correctly.

You should not ignore third-party equipment models that are not included in official store mobile operator, but are popular among ordinary customers.

So, before making a final decision, it is worth studying several models:

• Asus;
• Zyxel.

Perhaps their characteristics will be more attractive, and the price will be more favorable. The main thing is to consult with the store’s employees before purchasing and make sure that the selected model is compatible with your home Beeline Internet, and after the purchase there will be no unexpected difficulties.

Which Wi-Fi router is better to choose?

When choosing a Beeline wifi router for home Internet, it is important to consider every little detail so that the final connection parameters are optimal. Thus, the devices present in the provider’s stores make you seriously think about the connection speed. They allow you to support traffic distribution up to 1000 Mbit/s. The minimum available value will be 50 Mbit/s.

It is worth taking a closer look at the individual features of each model you like. For example, Smart box Pro is equipped with four LAN connectors at once. But ZTE is compact and reliable in any conditions. In addition, it has a SIM card slot, which allows you to take the device with you and use it anywhere where the subscriber needs access to the worldwide network.

It is important to emphasize that there is no unequivocally bad or ideal equipment. Each model has own advantages and disadvantages. Therefore, to accept optimal solution, you should focus on your own preferences and needs. Only in this way will the equipment be as useful as possible, and operation will be convenient.

Where can I buy it?

If the user does not intend to use third party devices and is going to use the branded stores of the mobile operator, it’s worth:

1. log in to ;
2. go to the page with a list of products;
3. buy the one you like;
4. get the equipment at your nearest communication store.

The list of retail outlets of the network is presented on the official website, so finding the right salon will not cause any difficulties for users.

It is worth adding that the cost of equipment varies from 2500 to 3900 rubles. Moreover, the indicated price includes not only the device chosen by the client, but also the tariff plan.

Choosing an alternative tariff or refusing a SIM card can change the cost. More detailed information can be obtained by contacting consultants. They will not only tell you about current prices, but also explain how to make a purchase and describe the main characteristics of the selected equipment.

Price for routers

The price range for devices established on the official portal of the provider has already been mentioned above. Smart box is the most expensive Pro Black, providing clients maximum speed data transmission.

The cheapest Beeline Wi-Fi router is Smart box One. Its cost is 2500 rubles. For the specified amount, speeds of up to 100 Mbit/s are offered. The only cheaper option than this model is the TP-Link Re200 White signal amplifier, which requires payment of 2,190 rubles.

It is important to add that most of the equipment presented on the portal is valued at 3,290 rubles. Considering that in most cases the price turns out to be the same, we can call it the determining factor that you should focus on when choosing optimal option connection is impossible.

Conclusion

To summarize, it is necessary to emphasize that it is not the model of the equipment you like or the quality of the signal that is decisive, but the user’s opinion. When choosing equipment, it is worth remembering the situations in which the devices will be used, the conditions for connecting to the Internet and the desires of the subscriber. In case of doubts or difficulties, it is advisable to consult with the operators contact center or managers working in communication shops. Only in this way will the quality of the services provided by the provider be maximum.

Beeline is one of the TOP Internet providers that operates even in the most remote areas of Russia. This organization provides access to any type of Internet - both home and mobile. But to save money, most people started using a wi-fi router.

The router can be purchased at almost all points of the Beeline operator. But sometimes setting up a router from this supplier becomes a real problem for an unprepared person. We will help you sort this out.

In general, the process does not require special knowledge, and every person can cope with this task. To do this, you do not need to call a specialist and overpay.

Reference! For different connections, the connection and installation diagram is the same.

1. If the router is new, you should unpack it and then connect the power adapter.
2. Choose a convenient location where the equipment will be located.
3. Connect to the Internet via wi-fi or cable.
4. Connect your laptop or computer to set up.
5. Connect your router to the mains.
6. Set up the router (to do this, follow the link that is written on the bottom of the router, next to it you will find your username and password).
7. Set up the Internet (discussed below).
8. Configure your wireless network settings and change your username and password.

Setting up a router for Beeline - ASUS

If we consider a router with reverse side, you will see 4 identical holes yellow color and one blue (for the Internet). Insert the wire from Beeline into the blue port, and connect the wire to the PC into the second one. With its help we will configure the router. Next, extend the antennas and connect the router to the Network.

Important! Before you start installation, check the type of connection (in the propertiesIPv4 you must register the connection to acceptIP addresses and servers automatically!). Otherwise, this may cause network errors upon further connection.

Connection procedure

1. We launch any browser, enter 192. 168. 1 in the address bar.

   

2. Next, we indicate the parameters (basic login and password, which is written on the bottom plate of the device).

   

3. Go to the WAN/Internet section.

   

4. Set the connection type to L2TP/L2T and dynamic IP (if available).

   

5. Specify the login and password issued by the provider (written down in the contract).

   

6. Enter the host name, indicating the address tp.internet.beeline.ru, and select one of two values ​​- PPTP or L2TP.

   

7. Check the operation of the router: just enter any website and see if it loads or not.

Attention! To ensure proper operation, before starting setup, remove the connection type that was previously used.

Launching Wi-Fi for ASUS RT-N12

1. We launch the browser and enter the standard numbers 192. 168. 1 and enter the password indicated on the back of the router box (admin, admin).

   

2. Go to the Wireless Networks section called wireless.

   

3. Next, in “SSID” we indicate the name that you choose yourself. To protect your data, use strong passwords with English letters and numbers (you can also use capital ones). Save.

   

4. Network authentication – WPA Personal.

   

5. Write your password and confirm it again.

   

6. To fix changes made, click "Save".

   

If you have completed the steps correctly, you can start using the Internet.

Setting up a router for Beeline: TP-Link

Important! Before you start the installation, check the type of connection (in the IPv4 properties the connection must be set to accept the IP address and server automatically!). Otherwise, this may cause network errors when you continue connecting to the Internet.

Connection procedure

1. Open any browser, enter 192.168.

   

2. We write down the login and password specified by the manufacturer.

   

3. Open the “Internet/WAN” section.

   



4. In the “Connection type” line, indicate L2TP/Russia L2TP.

   

5. We register the login and password issued by the provider (specified in the contract).

   

6. Our host name is tp.internet.beeline.ru.

   

7. Check the operation of the router by clicking on any link.

Setting up a router for Beeline: D-link DIR-300

If you look at the router from the back, you will see 4 yellow holes and one blue hole (for the Internet). Insert the wire from Beeline into the blue port, and connect the wire to the PC into the second one. With its help we will configure the router. Next, extend the antennas and connect the router to the Network.

Important! Before starting installation, check the type of connection (in the IPv4 properties, the connection to obtain an IP address and server must be specified automatically!). Otherwise, this may cause problems with your future Internet connection.

Connection procedure

1. Enter 192. 168. 1 in the browser.

   

2. We write the name and password specified by the manufacturer on the back panel of the router.

   

3. In connection types, select L2TP.

   



4. Fill in the server name by entering the address tp.internet.beeline.ru.

   

5. Uncheck the “Without authorization” and “Enable RIP” checkboxes.

   

Next wi-fi settings

Setting up Beeline Internet: home router

For a home router, Beeline recommends all models of Smart Box routers. Their distinguishing feature– speed, number of holes for USB and range (can be in the range from 2.5 to 5 GHz). Setting up such a router will be even easier thanks to the connection device. During installation, you will only indicate your region of residence and name settlement, and everything else will be configured automatically.

Connection procedure

• connect the Internet cable to a special port (it will be marked in a different color, there is only one);
• We connect the PC to the router with a small wire that will be included with the device.

1. Open any browser and enter 192.168.1.1. Click Continue.

   

2. Enter your standard login and password admin, admin.

   

3. From the main menu select " Quick setup».

   

4. In chapter " Home Internet» Enter your username and password in the appropriate fields specified when concluding the agreement.

   

5. As a preliminary key, we come up with a name and password, which will contain at least 8 characters.

   

6. Click "Save".

   

Important! Before checking the Internet, reboot your router.

Video tutorial on setting up a Smart Box router

If you follow all the instructions, you can do it yourself and quickly. If something doesn't work, try again or call a specialist.

Video - Setting up Wi-Fi router ASUS RT-N12 for Beeline

The Beeline company provides everyone with the opportunity to buy branded multifunctional devices in its showroom that meet modern requirements wifi networks. Now each client has access to the model that best suits his requirements. Regardless of the manufacturer, the router must have a password.

The password has only one purpose - to make you paid wifi zone safe. Unfortunately, today it is a very common phenomenon when strangers guess the access code and use the Internet without the owner’s permission. This can negatively affect not only the quality of traffic, but also provoke the loss of valuable information from computers or gadgets. Therefore, experts advise changing the wifi key monthly and making it as complex as possible each time. To do this, it is recommended to use a combination of numbers, symbols, large and small Latin letters. It is also convenient to change the password to something more memorable for you.

Changing your password is not that difficult, so even a novice user can do it. To successfully change everything, you need to take into account the features of each wifi router.

Changing the password on Smart Box

Recently, in authorized Beeline showrooms, it became possible to buy a new branded router Smart Box. It is classified as a technically advanced device due to its ability to maintain speeds of over 250 Mbps. If you managed to buy yourself this new product and want to secure your network and change Old Password, follow these steps:

1. Check the connection of your computer and router to the network.
2. Launch the browser and type “192.168.1.1” in the address address. This will take you to the welcome page. Click “Continue” on it

3. Enter “admin” next to “Username” and “Password” in the identification window. Then click on “Continue”.

4. After authorization is completed, a window for access to all device settings will open.
5. Open “Advanced settings”.
6. Go to the “Wi-Fi” section. Here click on “Security”.
7. In “Authentication”, set the most secure value “WPA2-PSK”.
8. In the “SSID” line, enter the new name of your network.
9. In the “PSK” line, enter secret combination and click “Save”.

In order for the introduced changes to take effect on the router, reboot it and log into the Beeline network using these data.

Changing the password on Zyxel Keenetic Ultra

The Taiwanese company Zyxel occupies one of the leading positions in the Internet equipment market. Its products are famous all over the world, so the Beeline company made sure that its customers only use the best goods every day. Despite the brand name, anyone can change the network access code on this router. To do this you need to follow a few simple steps:

1. Open your browser.
2. Enter "192.168.0.1" into the search field.
3. The device will ask for identification information. To do this, enter “admin” in the blank lines.
4. After successful input, a window with all device settings will pop up on the monitor.
5. At the bottom there will be the required “Wi-Fi Network” tab.
6. In the “Network protection” item, set only “WPA2-PSK”. This is the most reliable type of protection.
7. In the “Network Key” enter a new password.
8. Click “Apply”.

To avoid problems connecting to the Beeline network, reboot your router. Then enter new code access on all your gadgets and enjoy high-speed Internet.

Changing the password on ZTE MF90

A modern router that supports 4G is ideal for travel. Users note its pleasant appearance, ease of operation, reliable connection and long battery life. To change the password on this router, you need to spend five minutes and follow a few simple steps:

1. Launch the browser.
2. Enter “192.168.1.1” in the address field and click “Enter”.
3. In the authorization field, enter “Admin” next to your login and password. If a restriction has already been placed on your network, then enter this data.
4. Go to “Wifi”.
5. Fill in the “SSID Network Name”.
6. In the “Network encryption type” field, put “WPA2-PSK”.
7. Enter your new password in the appropriate line below.

Be sure to reboot the device for further successful operation of all electronic devices with a new secret combination.

Changing Huawei E355 (3G Wi-Fi) password

Officially, this high-quality 3G router is called Huawei E355. Chinese company Huawei has been specializing in the production of modern devices to work on the Internet, which is why leading communication companies provide them to their clients. Of course, Beeline was no exception. To quickly change the passkey on this device, do the following:

1. Launch your browser.
2. In the search, type “192.168.3.1”
3. The monitor will show home page, which shows the signal and connection. Below you can see the number of connections.
4. At the top right is the “Log In” link that you need to follow.

6. After completing authorization, open the “Settings” tab.
7. Open the “WLAN” section, and in it the “WLAN Basic Settings” subsection.
8. In the “NAME (SSID)” line, enter the name of your network.
9. In “Authentication” set “WPA/WPA2-PSK”.
10. In the line “WPA pre-shared key” you can change old code access to a new one.
11. Click “Apply” to save the settings on the router.

After successful saving, reboot your device to safely work on the Beeline wifi network. Don't forget to change the access code on all gadgets.

To keep your password strong, remember the following guidelines:

• Do not use the full name, dates of birth of relatives and close people.
• Pet names are also easy to guess.
• Don't use easy number combinations.
• Enter the key only in Latin letters.
• Alternate between capitals and capital letters, numbers and symbols.
• If you doubt that the password you have created is not complex enough, check it with special programs that can be found on the Internet.

Let it be a chaotic meaningless set of letters mixed with digital values. Initially, write it down on a piece of paper, place it in a visible place, and only then start changing the data. Do these simple steps at least a month and you don’t have to worry about the quality of the network and the safety of your personal data.

Found a typo? Select the text and press Ctrl + Enter

Let's consider this action using the example of settings on the most popular OS.

Setting up a network card

We carry out the installation ip addresses . To do this, go to “Start”, then to the “Control Panel” section and select “ Network connections».

Click right click by section this menu"Connect via local network" - select "properties" in the drop-down menu, click on "Internet protocols TCP/IP" and select "properties" again.

Check the boxes where the word “Automatic” appears and save the changes.

After completing these steps, you can begin connecting the Beeline router.

How to set up a wifi router d-link dir 300 for Beeline

Enter - admin in both lines, this data is standard for everyone. You can change them later if you wish.

Now the settings page will become available to you; it is better to give preference to selecting the function manually. To enter the desired menu Click on the “Advanced settings” link.

On the page that appears, select “WAN”.

The following sections must be completed:

• connection type - L2TP Dynamic IP;

• user - the login that was created for you when you connected to the Beeline Internet will definitely be in your contract;
• password - the password that was created for you when connecting to the Beeline Internet must also be in the agreement;
• VPN server address - write the following: tp.internet.beeline.ru.

Then you need to click the “Change” button.

Go to the “Advanced Settings” section again, select WI-FI - then “Basic Settings”. In the “SSID” line, enter the name of your Wi-Fi network and click “Change”.

Note! If you want to password protect your network, returning to the previous menu, click on “Security Settings”. Opposite the “authentication” section, enter WPA-PSK2, “key” - own password. (This is the most common security connection and will help you protect your network from hacking and unauthorized use of the Internet.)

How to set up a tp-link wifi router for Beeline

To set up tp-link router for Beeline, you should enter one of the addresses to choose from - 192.168.0.1 or tplinklogin.net into the address bar.

Select the Network section, and in it the item - WAN.

On the page that opens, opposite the line “WAN (Connection Type), you need to select L2TP/Russia L2TP, in the “user name” and “password” fields, enter the data specified when connecting to the Beeline Internet.

Then in Server IP Address/Name enter tp.internet.beeline.ru. Be sure to check the box next to Connect automatically.

Save your changes.

After this, the Wi-Fi network will be available for you to use.

How to set up a Beeline routerSmart Box

First connection router, you can use a cable or configure it wirelessly Wi-Fi connection. The network address will be default - 192.168.1.1

Open Beeline Smart Box.

On this page you need to click on the “Continue” button, this will help you get to the authorization section.

Login/password – admin/admin. After entering the data, it will open start page.

Before installing Beeline router Smart Box, click on the “Quick Setup” clickable button, after which a window will appear containing all the basic connection parameters.

In the field opposite the “Login” line, you must enter the contract number concluded with the provider, “Password”.

If you have lost the data required for authorization, please contact service center Beeline - after confirming your identity, the operator will give you necessary information.

After completing all these steps, click “Save”, and immediately click “Reboot”.

The router is connected, you can start setting up Wi-Fi networks. To do this, you need to go to Smart Box.

Select the section “Advanced settings”, which will allow us to go to the expert settings Smart settings Box. Click on the “Wi-Fi” section, in the menu of which we select the first item – “Basic parameters”.

To increase network security, the “Authentication” line should be set to “WPA-PSK”.