Largest Russian operator satellite television Tricolor TV conquered big market viewers by initial affordability. And now, when the number of subscribers has exceeded 10 million, the Tricolor TV company has decided to impress viewers full program. In addition to advertising on channels created by Tricolor TV, where it was not previously available, now advertising screensaver appears for a few seconds between switching tricolor TV channels. In the near future, we may expect an increase in the subscription fee or a cut in the basic free package.

Advertising insert when switching tricolor TV channels appeared in new firmware software, which, as it turned out, was released not only to improve very “crude” receivers, but also to optimize the parameters of advertising inserts.

Fight against advertising on Tricolor TV

To disable advertising, make changes in the receiver settings: Menu - Settings - System settings- Other - Display time and set the parameter to "0" - Save changes - Exit - Turn off the receiver from the network for a few seconds.!

If you can’t remove advertising with some model, write to the tricolor TV support service or contact an online consultant in your Personal account on the Tricolor TV website and demand that advertising be removed! There are already such applicants, advertising is being removed. It’s easier for them to sort this out with you, because they will still have 10 million unsuspecting subscribers.

Scammers have already responded on the Internet, who, under the guise of tricolor TV support, offer to remove the advertising screensaver if you enter your number cell phone, this is a scam site "application-to-disable-advertising.rf" Don't be fooled!

The "Basic" package becomes paid

The Tricolor TV company promised that the main all-Russian TV channels will always remain FREE.

From February 5 for Tricolor TV subscribers with MPEG2 equipment without subscription fee about 10 main ones are available federal channels. Since the date indicated above, “Channel 5 Petersburg” of the free package has been transferred to frequency 12111 L (DVB-S2), where SD channels are broadcast in improved quality (DV multiplex). A copy of “Channel 5 Petersburg”, which is broadcast on 12226 L in MPEG2, is available for viewing only after paying the “Unified” tariff, which is 1200 rubles per year.

They also ceased to be available (in free package) TV channels: "TV-Center", "Russia 24", "Carousel"

Detailed video instructions "How to remove Tricolor advertising"

There are several ways to get rid of advertising on the Tricolor info channel and turn on your favorite channel when starting up the equipment. You just need to carry out simple manipulations with the remote control.

Users often encounter the problem of unnecessary TV channels appearing. These could be the following channels:

• Duplicated as a result of software updates;
• Changing the channel's broadcast frequency, which led to the absence of broadcasting;
• Family members are not interested in watching programs;
• Reproducible in poor quality channels due to equipment changes.

To enjoy watching your favorite channels and not encounter advertising information channels, you need to delete or encode them.

How to delete channels - instructions

When the option to create favorite lists appeared, the ability to change classic lists disappeared. But it is possible to remove it if Stingray software is installed on the equipment. It is characterized by the presence of a manual search.

The channel removal procedure consists of the following steps:

The editing operation takes into account the fact that deleting a list " Manual search" will cause all channels to disappear. Therefore, as new lists appear, it is necessary to move this list down.

After performing these steps, when you turn on the receiver and TV, the first channel from your list will be displayed. But all preset lists will disappear from the menu. And also opposite the TV channels in your list there will be question marks(don't pay attention). The procedure is suitable for receivers of the GS 8306, B210, B531 and other modern models.

How to remove duplicate channels

You can remove duplicates by organizing channels:

Some receiver models (GS 8300, 8302, 8304) require confirmation of the delete operation by entering the code “0000”.

New clients who connect to Tricolor broadcasting can get rid of unnecessary channels by blocking. Execution scheme:

• Go to the main Menu and select “Channels”;
• Open the “Organization of channels” section (if required to gain access, enter the code “0000”);
• Moving through the list of channels, press the yellow button on an unnecessary position;
• To exit, click “Exit” and save the changes.

By placing a blocked TV channel at the bottom of the entire list, the user will not notice its presence when switching.

How to restore a deleted channel by mistake

A full return to previously broadcast channels is possible by resetting the settings and then standard search. A blocked channel can be returned to display by removing the block and confirming the operation by entering the code “0000” (when moving through the list, press the yellow button on the blocked channel).

Both old and new customers periodically face the fact that there are too many TV channels on the menu. Some may be duplicated after a software update, others are already outdated and do not work, and some may simply not be needed or interesting to household members. And then clients have a question, how can they delete or change channels on Tricolor TV equipment? After all, it’s much more convenient to remove completely empty programs and rearrange the list so that your favorite TV channels are always visible.

What to do for existing clients

Satellite broadcast packages include many different channels, but not all of them are needed by users. This is especially true for outdated and poorly transmitted modern equipment, as well as commercial programs. Users who have not yet managed to replace the receiver with a new one can delete it without special problems. You just need to use the remote control from the transmitter.

1. Go to “Menu”, “Settings” and click on “Arrange favorites” or “Organize channels”.
2. Delete the entire favorite list containing unnecessary TV channels by pressing the red button on the remote control.
3. If you use yellow, the list items will be arranged alphabetically. Select an unnecessary channel from the list and click “OK” to delete it.
4. Don't forget to save your changes before exiting.

For some receivers code required to delete or sort transmissions, it is simple - 0000. This method is not suitable for all types of equipment, mainly only for DRE 5000-7000, GS 8300 (M, N) and GS 8302, 8304. If your receiver belongs to one of these four models, then the problem is how to remove unnecessary channels you won't have. As for everyone else, it is possible with them only blocking.

Solving a problem for new clients

On modern devices everything is a little more complicated; you won’t be able to delete channels on them. New users also often ask the question “How to remove unnecessary programs?”, However, on new receivers you can only block them. And for this you will also need code 0000. The blocked TV channel will remain in the general list as extra ballast, but it will not interfere with the main broadcast. If you place it at the end of the menu, you can even forget that you have unnecessary TV channels.

To understand how to block unnecessary broadcasting, you need to take the remote control from the receiver and perform several actions:

Also, with new and old equipment, you can swap items, rename TV channels and create lists by genre to immediately find the desired program. Now the satellite television company is actively updating the software, so soon, no matter how much you want to delete extra channels on Tricolor, this opportunity will no longer exist.

Creating a favorite list on receivers
brands: GS E501/GS C591; GS U510; GS U210

The new receivers of the Tricolor TV company have created standard lists TV channels. They cannot be edited or deleted, but to configure own list, you can create a separate favorites list with a list of channels that you use.

Creating a favorite list of TV shows on PGS E501/GS C591 receivers; GS U510; GS U210 is carried out using the menu - “Channel Editor”, where you can organize the list of channels at your discretion.

And so we begin to create a favorite list.
1. On the control panel (RC), press the “MENU” button and in the pop-up window at the bottom of the TV screen using the “RIGHT” - “LEFT” buttons, select the “APPLICATIONS” menu item and confirm the selection with the “OK” button.

2. In the new menu window that opens, use the arrows “RIGHT” - “LEFT”, “UP” - “DOWN” on the control panel to find the submenu “CHANNEL EDITOR” and press the “OK” button, after which a window will open in which we will directly create a favorite list .

3. On the left side of the window we create our list of channels. To create a new list, click green button F2 PU, after which the on-screen keyboard will open, where we enter the name of the new list, for example “MY CHANNELS”. Save the name of the favorite list with the blue F4 button PU.

4. Move the cursor to the list we created and press the F2 button; a list of all TV programs available on your receiver will appear on the right side of the window. Select from the list the TV channel that you want to save in your favorite list and press the “OK” button on the control panel. Press the green F2 button again and select the next channel. We repeat this operation the required number of times.

5. Move channels up and down using the red F1 button. Place the cursor on the channel that needs to be moved and press the F1 button (the selected channel will be indicated by a special symbol), use the UP - DOWN arrows to move the channel to the desired position and press OK.
You can delete an unnecessary channel using the yellow F3 button.
6. After we have created the favorite list, exit the “CHANNEL EDITOR” application by pressing the “EXIT” button several times.
7. Press the blue F4 button and in the pop-up window (on the left side of the screen) we find the list we created, in our case “MY CHANNELS”, confirm the selection with the “OK” button.

This completes the creation of the favorites list. On receivers of the GS E501/GS C591 brands; GS U510; With GS U210, you can create up to fifteen favorite lists with different names and organize the channels as you wish.

Read also:
How to create a favorite list on brand receivers -

Using satellite television is very convenient, but from time to time, both old and new customers have problems. A large number of channels appear on the screen that need to be deleted. But few people know how to remove unnecessary channels.

Why unnecessary channels appear:

There can be many reasons. But when they appear, it becomes very difficult and inconvenient to use such television.

• One of the reasons for the appearance of extra TV channels is reinstallation software;
• It also happens that a channel used to work, but then it was transferred to a new broadcast range and therefore it no longer works. Then you need to remove it so that it simply does not bother you;
• channels have been installed that are of no interest to anyone, so why would they interfere if it is easier to block them.

So it’s much easier to install programs in such a way as to immediately get to the channel that is needed. And then just enjoy watching. Most often, clients refuse unnecessary ranges for the reason that they are outdated or poorly reproduced on new equipment. If you are a satellite TV user with old equipment, then it is much easier to abandon unnecessary channels.

So, let's learn how to remove unnecessary channels on Tricolor satellite TV. Let's look at the step-by-step instructions. How to remove? All you need is the remote control for your TV, so:

• Select “Menu” on the remote control, then go to settings. Then you need to select “Arrange favorites”;
• using the red button on the remote control you can delete the entire list of channels that you no longer need;
• no deletion code required. You can organize all channels using the yellow button;
• The final step is conservation. If this is not done, then all efforts are in vain.

New users

How to resolve the issue of deleting channels for new users on Tricolor? On devices that are considered next-generation hardware, things are much more complicated. Here you can only use blocking. The block is also installed when using 0000. In this case, the program will remain, but it will not interfere with watching programs. As an option to resolve the issue, you can move it to the end of the list and then it will not come to your attention at all. To refuse, you also only need a remote control; you don’t need to do anything on the receiver.

Phased shutdown:

• select the “Menu” item on the control panel;
• go to the “Installation” program;
• then enter 0000;
• the next stage is “organization of channels”;
• use the arrows to select unnecessary information on the screen and after selecting, press EXIT, and then save.

The same steps can be taken if you decide to change the name of the broadcast.

At the moment the company is replacing all software. Therefore, in the near future, the possibility of changing something will generally remain a thing of the past. So try it now while you still have the opportunity.

If there is a need to unlock or return the channel, then do the same using 0000 to unlock the receiver. Read also.

G S B211 TV channel editor, watching TV.

Many people ask us - how to change the list of TV channels on the GS B211 receiver? And today we have prepared material on this topic. Everything is very simple here, but you need to understand that you need to spend a little of your time on this. Anyone who is not satisfied with the order of the list of TV channels that the operator Tricolor TV offers from the stream may find this useful.

G S B211 TV channel editor, go to the receiver menu.

In order to do everything, we need to go to the receiver menu and find the corresponding function, to do this we press a few buttons and enter. For convenience, an arrow shows where you need to go.

G S B211 TV channel editor app

G S B211 TV channel editor, list of folders in the receiver's memory.

As you can see that on the left side of the screen there are folder names, in each of them, when you hover over them, there are TV channels and these TV channels appear on the right side. These lists are sent and generated by the Tricolor TV operator in his control room and the receiver already receives them finished form. Therefore, it is possible that many people do not like it.

G S B211 TV channel editor blocking mode.

Of course, you can try to go into this list and try to change something, but you won’t succeed, because the developers have blocked all the possibilities, leaving only the ability to block a TV channel, this is a function in order to watch this TV channel you will need to enter code. It is clearly visible on the screen that there seems to be a list, but it is not active.

G S B211 TV channel editor, create a new folder.

In this case, you need to do things a little differently, create your own folder and name it something that would be clear to you. To do this, use the on-screen keyboard to enter the name, selecting characters in Latin or Cyrillic, or using numbers.

G S B211 TV channel editor, selection of TV channels for your list.

The name has been entered, you have new folder, now you need to add TV channels to this folder, to do this, leaf through the list of those offered and mark all the TV channels that are interesting to you; don’t look at their order now, you don’t need to pay attention to this fact at this stage.

G S B211 TV channel editor, editing your list.

After you have selected TV channels, they appear in your folder and now you can move everything around, there are two ways to do this - either select a function using additional colored buttons on the remote control, a hint on the TV screen, or using the on-screen menu.

G S B211 TV channel editor, functions that are available in the editor.

Here, just like in the lists that the operator offers, only all actions are workable and not blocked, for example, select the delete function and delete all TV channels that are not interesting to you, want to change places, select edit and drag TV channels from one place to another.

It is worth noting that the larger the list, the more the receiver “thinks” or is “stupid” or “there is a delay”, here you can’t do anything, this is a problem with the receiver and you can only wait until perhaps this processing speed is corrected.

And in conclusion, you can watch a video in which everything will be shown. Experiment with lists, now we hope everything works out for you.

The “main menu” of the satellite receiver is called up by pressing the “MENU” key. To select a main menu item, use the up/down and left/right keys, to confirm the choice - the "OK" button, to exit the "Main Menu" - the "EXIT" key or the second "MENU" key. The “Main Menu” and all its internal items are full screen. Internal menu items include:

Menu title.
- Panel function keys Tricolor receiver, including 4 colored keys displayed on the TV screen in the same order as on the GS HD 9305 receiver remote control. If the key is active, it has an inscription. The inscription under the key informs about the action performed when this key is pressed. If a key is inactive, it does not have a signature.
- Menu sections. To select a menu section, use the up/down buttons, to confirm the selection - the "OK" button, to cancel or go to a higher level - the "EXIT" button.

HD 9305 menu items may look like this:
1. Keys for moving to the next menu level satellite receiver.
2. Input fields. To enter, use the “NUMBER buttons 0-9”.
3. Drop-down lists. To open the list, press the “OK” key; to move through the list, use the up/down buttons; to confirm a selection, use the “OK” key; to cancel, use the “EXIT” key; in addition, you can select a list item using the left/right keys.
The drop-down list can also be an input field. To access certain functionality of the Tricolor TV HD receiver, you may need a PIN code (you will be required to enter a code on the TV screen). For more details, see the “Blocking” section.

To be able to add to the HD receiver’s memory or update the list of found Tricolor TV channels and radio stations, use the specialized function “Search for Tricolor TV channels.” The main advantage of such channel scanning is that there is no need to know the frequencies, polarization, and other technical characteristics of the broadcast of television and radio channels. To search for television channels and radio stations of the Tricolor operator, in the “Main Menu” select the item “Search for Tricolor TV channels” and press the “OK” key. When prompted to confirm scanning of channels and radio stations, select “Yes” and click “OK”. The “Select Region” menu will appear on the screen of the television receiver (see “Setup Wizard”, step 5). Specify the region using the left/right keys or the drop-down list, then to save the specified region, move the cursor to the “OK” button and press "OK" key on the receiver remote control. After that, scanning of TV and radio channels will begin.

If the region data was specified in the “Settings Wizard”, then after confirming the request to scan TV and radio channels of tricolor TV, selecting your region is not necessary.

After scanning, you will be asked to save the found TV and radio channels. To save the scan results, select “Yes” using the left/right keys. TV and radio channels scanned up to that time will be displayed in the list of TV and radio channels in white, and new channels found within of this search- in blue.

The color highlighting of new TV and radio channels disappears the first time you switch to these channels, also after there is no power supply and the receiver is further connected to the electrical network.

Search, organize and edit Tricolor channels.

In this menu item, the subscriber will be able to search for TV and radio channels, in automatic or manual modes; the menu items “Organize channels” and “Arrange favorites” are also available.

Automatic search.

In the GS 9305 HD menu section “Automatic search”, you can search for TV and radio channels in automatic mode. This requires:
1. Indicate the number of the satellite antenna or set the parameters for a new one: press the blue key, the “Antenna Settings” window will open, in this window you need to enter the settings of the new satellite dish(see section “Antenna setup”)
2. Indicate the name of the satellite from which the channels are broadcast
3. Specify encoding

Encoding type
Specify “Any” - leave unchanged.
Specify “FTA” - leave unchanged.
Select “DRE+FTA” if you want to store TV and radio channels in the receiver’s memory open access and tele or closed with “DRE” coding

Select “Quick search” or “Full search” in the menu.
Quick search - the satellite receiver searches for channels using the list of transponders located in the permanent memory of the satellite receiver. Full search- the search is carried out according to the list of transponders located in the memory of the tricolor TV HD receiver, and the frequencies of the transponders that are broadcast in the stream.

Manual channel search mode.

In the menu section "Manual search" it is possible to set detailed settings(transponder frequency and polarization) to scan tricolor TV channels with arbitrary indicators. For this case you need:
1. Indicate the number of the satellite antenna or set the parameters for an additional one by pressing the blue button, after which the “Antenna Settings” window will open, in this window you need to specify the settings of the new satellite antenna
2. Indicate the name of the satellite
3. Specify from the drop-down list, or set manually using buttons 0-9, the transponder frequency in xxxxx format. To confirm specified parameters you must press the "OK" key
4. Specify from the drop-down list or enter manually using the numeric keys the flow rate in xxxxx format. To save manually entered data, be sure to click the “OK” button
5. Specify transponder polarization (vertical, horizontal, left, right, auto)
6. Specify the encoding type. If the transponder exists and the information is correct, the signal strength and quality scales at the bottom of the screen will turn green
7. Select “Search” or “Network Search” in the menu
Search- the receiver scans according to the parameters specified by the user.
.
Network search - this feature is executed if the source transponder contains information about the frequency of another transponder in the digital stream. Scanning will continue on another transponder. During scanning, a progress bar and 2 lists of detected television and radio channels are displayed on the screen of the television receiver. If found TV channel is already present in the general list, it will not be added again. After this, a request will appear on the TV screen to save the found TV and radio channels, confirming their number.
.
When you press the “EXIT” key while scanning television channels, the search will end; in the meantime, it is possible to store in memory those television and radio channels of tricolor TV that the receiver has already been able to find.

Organization of channels

The “Channel Organization” menu includes categories of TV programs based on specific properties:
TV/Radio - includes two lists of television and radio channels: TV and Radio;
Operator - includes a list of operators of scanned TV and radio channels;
Satellite - includes a list of satellites from which television and radio channels, tricolor TV and radio stations were detected;
Transponder - includes a list of transponders from which channels were found.
To select a group, move the cursor to the group name using the keys to go to the list of group elements, press the “OK” key. Using the keys, select the desired list item and press the “OK” key, after which a window will appear on the TV screen with a list of television channels in the original group. On the right side of the channel list there is a field with the parameters of the selected television channel: satellite, operator, frequency, polarization, flow rate (SR), error correction parameter (FEC), encoding.

On the right side of the radio channel name there is a special icon. Scrambled, that is, paid channels are marked with the “$” symbol. After Tricolor TV channels are decoded, this icon will not disappear. There is also a way to edit TV and radio channels.

EDITING TV and radio channels - in order to select a TV channel or radio station, press the “OK” key. The highlighted channel or radio station is highlighted with a tick. To cancel the selection, press the “OK” key again. To mark a group of TV and radio channels, use the “OK” key. To invert the selection for group operations, press the green key. To move through the list, use the up/down keys.

DELETE channels - select the channel or several channels that you intend to delete. Press the RED key. A message will appear on the TV screen. To confirm the channel deletion operation, move the cursor to “Yes” and press the “OK” key. If you want to cancel the deletion, move the cursor to "No" and press the "OK" key or press the "EXIT" key.

LOCK - Select the channel or group of channels you want to lock. This feature will be useful if you are viewing the Tricolor TV “Night” package and want to block these channels from children. Click " YELLOW button" Next to the channel number will appear special character locks - lock. To unblock a channel, you must enter a PIN code. If you want to remove channel blocking, you must select the blocked channel and press the “YELLOW key”. After this, the channel number next to it will disappear special sign blocking.

Organize favorites

The menu item “Arrange favorites” makes it possible to create favorite lists, add channels to lists according to specific characteristics (filter), select, delete, rename, rearrange and sort in alphabetical order. By default, the favorite lists “Music”, “News”, “Sports”, “movies”, “New 1”, ..., “New 26” are entered. The largest number of favorite lists is thirty. To rename the list, press the blue key.

In order to remove all TV and radio channels from the favorite list, specify desired list, press the red key and confirm deletion. To add channels to the list, select the desired list and press the OK key. The window that opens on the left side of the screen displays the contents of the favorite list, and on the right side of the screen the channels from which you can create a favorite list are displayed. Use the left/right keys to move the index to the list of all TV and/or radio channels. Using the up/down keys, select the desired TV channel or radio station and press the “OK” key, after which the selected TV channel or radio station will move to the favorite list on the left side of the window.

To move all TV and/or radio channels to your favorites list, press the blue key. To simplify the selection of programs, you can use sorting programs alphabetically (“YELLOW key”) or filter (“RED key”).

Using the filter, you can mark programs by specific characteristics: satellite, transponder, operator, type (TV, Radio), type of encoding (FTA, Coded, DRE, etc.). To filter channels by any property, press the red key; to reset filtering parameters, press the green key. To exit the filter, press the key yellow color or the "EXIT" key. To move a specified channel through the favorite list, use the arrow keys to select the desired channel and press the green key. An arrow sign will appear instead of the channel number.

Move the channel to a new position. Press the green key a second time to store the channel in the new position to return the channel to its starting position press the "EXIT" button. To remove a channel from the favorite list, select the channel you want to remove and press the OK key. To remove all channels from the list, press the blue key.

To access most of the receiver's functions, you must know your PIN code (you will be prompted to enter a code on the screen). The default standard PIN is 0000 (four zeros). Settings (language settings, A/V output settings, antenna, satellite, screen, time, lock, factory settings)

Satellite dish settings

The “Antenna Setup” menu screen is available in the “Settings” section by pressing the “OK” button or in the “Automatic” and “Manual Search” menu by pressing the “BLUE button” on the selected antenna. On this screen, you can assign special settings for switches, local oscillator frequencies, etc. to the antenna number.

At the starting point, the user must select the number of an existing satellite dish or specify the settings of a new one.
Any connected to the receiver (via a disk switch) parabolic antenna must have its own number in this menu item. Using the “RED key” of the receiver’s remote control, you can completely delete the parameters of the satellite dish, together with the channels belonging to it. To add a new antenna in the “Antenna” item, you need to press the “YELLOW button”, then set the settings for the new satellite dish. SATELLITE CONVERTER (LNB) SETUP
To configure the satellite converter, set its type: “Universal 1”, “Universal 2”, “9750”, “10600”, “10750”, “Custom”. If your antenna is tuned to Tricolor TV or NTV-plus, in this case you must indicate the type of converter “10750”. If the antenna is tuned to any of the European satellites such as: Sirius, Hotbird, Astra, etc. - you must specify “Universal 1”.

If you specified the LNB type “Universal. 1", then switching between local oscillator frequencies 9750 and 10600 MHz is carried out automatically, when you specify the transponder frequency value in the search menu for tricolor TV channels and radio stations. Setting the 22 kHz tone is optional (disabled). If you have set the LNB type to “Universal. 2", then switching between local oscillator frequencies 9750 and 10750 MHz also occurs in automatic mode. The 22 kHz tone setting is optional (disabled). In the case of LNB “9750”, “10600” or “10750”, the corresponding value of the lower operating frequency local oscillator If the required frequency is not in the list, click " BLUE key" and add a frequency manually using the "Numeric buttons". If you have selected the “Custom” LNB type, the values ​​of the lower and upper operating frequencies of the local oscillator can be set independently. For this purpose, press the “BLUE key” and specify the frequencies manually using the “NUMBER buttons 0-9”.

POWER SUPPLY TO SATELLITE CONVERTER (LNB)

Possible values ​​for this section: “Disabled”, “Enabled”, “Increased”. When you select the Off option, no power is supplied to the LNB IN connector. When selecting the “Enabled” option, the standard value of the satellite converter supply voltage is supplied to the LNB IN connector. When selecting the “Increased” option, the converter supply voltage increased by 1V is supplied to the LNB IN connector. Increased voltage LNB power supply used in rare cases of non-standard installations, mainly when the cable is too long.

TONE
The value in this field is set to 22 kHz and is used to switch the converter local oscillators. DISEQC 1.0

DISEQC 1.1 INPUT
If you have installed several satellite converters or antennas connected to the receiver using a DiSEqC switch, then you need to select the appropriate parameter Switch A-D or ToneBurst A/B or C+ToneBurst A/V.
DiSEqC 2.0 switches support control via the DiSEqC 1.0 protocol. When using DiSEqC 1.1 and DiSEqC 2.0 switches, you can connect up to 1 b satellite antennas to the GS HD 9305 satellite receiver. MOTORIZED SYSTEM

To work with a motorized antenna system, in this paragraph you must indicate its control type. If you are using a motorized system with a stationary control type, in this menu section set the value to “Stationary”, and in the next menu item indicate “Satellite name”. If you are using a motorized system with support for the DiSEqC1.3 control program, in this menu section specify the value USALS input. If you are using a motorized system to control an antenna drive with the DiSEqC™1.2 protocol, then in this menu item set the DiSEqC 1.2 input value. At set value USALS input or DiSEqC 1.2 input must be configured for USALS or DiSEqC 1.2 in the appropriate section. Pressing the “OK” button with the cursor positioned on this section will open a window in which USALS or DiSEqC 1.2 is configured.

DISEQC 1.2 SETUP

The “Position” field is available in the DiSEqC 1.2 setup menu. A field for selecting one of the existing positions or creating a new one by pressing the “YELLOW key” on the receiver remote control. You can delete a position using the “RED button”. To change the item number use " BLUE button": a window will appear on the TV screen for entering a number from the remote control of the satellite receiver using the "NUMBER buttons 0-9". To confirm your entry, click “OK”.

The selected position is saved in the positioner memory by pressing the “Green key”, this command accessible from all DiSEqC 1.2 setup menu items. SATELLITE NAME

Satellite selection field corresponding to established position. You can cancel the selection of a satellite for a set position using the “RED key”. To change the parameters of the selected satellite, press the BLUE key.

TRANSPONDER

The transponder selection field, scale of strength and signal quality of this transponder will be displayed at the bottom of the screen, and the “Satellite Settings” menu will open.

GO
When you press this button, the satellite dish is moved to the selected position.
SEARCHING FOR SATELLITE SIGNAL

This function is used to search for a signal from a satellite. After selecting the direction (East or West), the antenna will automatically start moving in the selected direction. The level of the received signal is controlled by the strength and quality scales at the bottom of the screen. To stop the antenna movement, press the RED button. To fine-tune the antenna position, use the commands “Step to the West” - “YELLOW button” and “Step to the East” - “BLUE button”.

SEARCH FOR CHANNELS
Performing a search for TV channels and radio stations using the selected transponder.
ADDITIONALLY
Opens the menu for additional positioner settings. The antenna can be moved to the starting position by selecting “Go to position 0”. To set the eastern (western) limit of the antenna movement, you must set the antenna to the extreme eastern (western) position, then select “Set eastern limit” (“Set western limit”). To disable limits, select “Cancel limits”. The purpose of the “Recalculate” command is individual for each positioner.

USALS SETUP
In order to configure a satellite dish, you must:
1. Set the latitude and longitude of the location of the motorized system, to do this:
Go to “My Latitude” or “My Longitude” and press the “OK” key.
Enter the values ​​using the “NUMBER keys 0-9” in the format xxx.x.
Press "OK" to save the entered values, or the "EXIT" key to cancel changes;
2. Specify the satellite to which the motorized system should be configured. The Orbital Position section displays the position corresponding to the original satellite.
3. Specify “Transponder”. Signal strength and quality bars for that transponder will appear at the bottom of the screen.
4. Specify the line “Go” and click “OK”. The satellite dish will begin to position itself on the selected satellite.
5. Select the “Channel search” item to scan channels from the selected transponder of the entered satellite.
It is possible to pause the movement of the USALS positioner by pressing the “RED key”. The positioner can be moved to the zero position by pressing the “YELLOW key”.
The settings are saved when you exit the USALS Setup menu. SATELLITE SETUP

The menu item “Setting up satellites” is available in the “Settings” section by pressing the “OK” key or in the “Automatic search” and “Manual search” menu by pressing the “BLUE key” on the selected satellite. The “Satellite Settings” menu allows you to specify the required satellite from the list, set a new one, delete it, or change both the name of the satellite and information about its orbital position. In addition, in this menu you can change transponder settings or specify new transponders. SATELLITE NAME

The names of the satellites are listed in alphabetical order. First, the list contains names in the Latin alphabet, then in other languages. If the required satellite is not in the list, press the yellow key. A “New” satellite will be added to the list of satellites. To change its name, press the blue key. Through on-screen keyboard add the desired name. In a similar way, you can change the name of each satellite.

ORBITAL POSITION

To enter the required orbital position, press the blue key and type using “ NUMERIC KEYS 0-9" required satellite position in format xxx.x, select the direction "W" (western longitude) or "E" (eastern longitude) and press the "OK" key.

TRANSPONDER

This item contains a list of transponders of the specified satellite. Any transponder has the following settings: “Frequency”, “Polarization”, “Flow rate”, “FEC”.

FREQUENCY

Enter the transponder frequency in xxxxx format. The frequency should be in the range of 3400-4200 MHz or 10700-12750 MHz. To enter the frequency 10719 MHz, dial 10719, to enter the frequency 3675 MHz, dial 03675.

POLARIZATION
Specify the type of polarization: “Vertical”, “Horizontal”, “Left”, “Right”. FLOW RATE

Using the “NUMBER buttons 0-9” indicate the required flow rate in xxxxx format. To set the flow rate, for example, 2500, dial 02500. To set the orbital position 125.6, dial 1256. To enter the orbital position 19.2, dial 0192

FEC
In this menu item, specify 1 value from the list of possible values ​​for the error correction parameter: 1/2, 2/3, 3/4, 5/6,7/8.

Screen settings in the GS HD 9305 receiver

In “Screen Settings” the user is supposed to configure the following options: “Menu transparency”, “Infobanner type”, “Display time”, “Power on mode”.
MENU TRANSPARENCY
This menu item specifies the degree of transparency of the informative banner image, the TV and radio channel list window, the time indicator, etc. The parameter value varies from 0 to 70% in 10% increments.
INFO BANNER TYPE
“Beginner” mode disables the ability to view data about the satellite, settings and program channel identifiers in the extended information banner. The “Expert” mode opens up the ability to view information about the satellite, settings and program channel identifiers in an expanded information banner.
DISPLAY TIME
This section specifies the display time of the information banner. The duration time can be changed using the number keys from 0 to 30 seconds. If you select value 0, the information banner will not appear when switching TV and radio channels.
ON MODE
“Standby mode”: after turning on the tricolor TV receiver to the network and moving the receiver’s power switch to the “I” position, the receiver remains in standby mode. To turn on the receiver, you need to put it into operating mode using the “STANDBY” key. “Operating mode”: after connecting to the network and turning the power switch of the HD receiver to the “I” position, the receiver enters the operating state.

TIME SETTING
In this setting, you must enter the time and date settings.
TIMEZONE
In the “UTC Offset” section, you can set the difference between your time zone and UTC (Greenwich Meridian Time).
UPDATE FROM SATELLITE
Additional choices: “Yes”, “No”. If you select “Yes” to set the system time and date, the receiver will use the data transmitted by the broadcaster as part of the satellite signal. If you select No, the receiver will use the date and time you manually entered during this installation step.
YEAR, MONTH, DAY
In this section, use the “NUMBER keys 0-9” to enter the time and date settings.
LOCAL TIME
This section displays the current system time according to your settings.
LOCKING

Set age limit and PIN code to restrict access to selected channels. This option defines viewing restrictions and prevents unauthorized access to certain sections of the menu of your receiver using a PIN code consisting of 4 digits and different from the default PIN code (0000). When the PIN code is entered incorrectly, you do not have the opportunity to switch to the next mode.

AGE LIMIT

In this menu you can set an age limit for viewing various programs. The age limit is set using a drop-down list, which is called up by clicking the “OK” button. This function works if the satellite television operator transmits information about the age limit for viewing its programs.

To access more functions of the receiver, you need to know the PIN code (you will be asked to enter the code on the TV screen). To change the PIN, go to the “Change PIN” menu item, in which you need to enter the current PIN code, and next to the “New PIN” indicator, set the new desired PIN code. To confirm the entry, you must repeat the new PIN code. If you forget the PIN code, you need to contact the service center where you bought the HD receiver, so try to remember the PIN code. FACTORY SETTINGS

In this menu item you can restore all settings to their default values. When resetting to factory settings, all information about configured TV channels and radio stations, antennas, and favorite lists will be lost. To load factory settings, select “Yes” and press the “OK” key.

Conditional access (Tricolor TV smart card, Tricolor TV HD module)

The 9305-HD receiver has a built-in DRE Crypt access module and allows you to access programs broadcast using the system conditional access DRE Crypt.

When switching to TV and radio channels in DRE encoding, a decoding delay of several seconds is likely and during this time an informative message Coded channel (DRE) will appear. SMART CARD TRICOLOR
In this menu item you can see data about the smart card: serial number, as well as software and hardware version.
TRICOLOR TV MODULE
In the initial menu item you can find information about the DRE Crypt conditional access module.
GENERAL INFORMATION
At this point you can get combined information about the software version and hardware built-in access module Tricolor TV.
DRE INFO
At the starting point, you can obtain general information about the software version of the conditional access system.

The “Status” window is called up in the “Main Menu” by selecting the “Status” section. In addition, the “Status” menu item window can be called up by pressing the “STATUS” key in the TV and radio channel viewing mode. The “Status” item stores the following information: satellite receiver model, DRE ID, receiver software version, module software version, serial number hd receiver. To obtain additional information (hardware version of the receiver, module, database version, platform ID, bootloader build date), press the green key. To close the window with additional information, press the green key again.

SUBSCRIBE

For information about subscriptions, press the red key. In the window that opens you can get general information about the geocode, subscriptions available on the map, mail subscriptions and their validity period. To exit the “Subscriptions” window, press the red key again.

All information from this menu is necessary when contacting the manufacturer's technical support service.
Materials for receiver GS 9305:

Subscribe to news