Tricolor TV software update hd 9305. Instructions for updating the software of Tricolor hd9303, hd9305 receivers


General information

The GS HD-9305 digital receiver is one of the devices developed by a Russian research and production company General Satellite. This device is recommended by the operator “ ” for receiving and viewing the “Maximum HD” channel package, which includes more than 100 SD channels, and more than 20 format channels high definition HD. IN retail sales These receivers arrived in early April 2013.

GS HD 9305 will replace its predecessor - the GS HD 9303 receiver , which has become widespread among users, but has already been discontinued. The main difference is that on the rear panel of the new receiver there is a composite RCA connector for connecting to regular TV. There are no other changes in the new receiver, not even internal organization remained the same.

This terminal has a number of advantages, as it was created specifically for viewing channels in high definition format. In addition, the receiver plays video in MPEG-2 and MPEG-4/AVС formats and with a resolution of 1080i/720p/576p, and receives both DVB-S and DVB-S2 broadcasts in the full range of 950-2150 MHz.

The HD 9305 receiver has a built-in conditional access DRE 3.0/ADEC, for which there is a corresponding slot. The delivery package already includes a Tricolor HD access card with an annual subscription to the Maximum HD channel package.

The developers tried to make the device as user-friendly as possible, equipping it with many useful functions. For example, EPG (electronic program guide), teletext, TV chat, TV mail, timer, subtitle support and others. The receiver also supports motorized antennas and cascadable DiSEqC switches.

The front panel of the GS HD 9305 is also no different from the GS HD 9303. Here it is Power button(on/off) and a four-digit seven-segment display, complemented by indicators for StandBy, TV/Radio modes, as well as a signal reception indicator.

On the rear panel there are various connectors that allow you to connect the receiver to modern audio-video devices. The connectors include: HDMI, S/PDIF, USB, LNB IN/OUT, a connector for the power cord and, accordingly, RCA tulips.

The scope of delivery of the GS HD 9305 receiver is quite standard.:

  • the receiver itself GS-9305HD
  • remote controller remote control with two batteries,
  • HDMI cable (0.7m),
  • RCA-RCA cable (tulips),
  • User's Manual,
  • warranty card,
  • subscription agreement and access card “Tricolor HD” with a completed subscription.

Specifications

  • Frequency range: 950 – 2150 MHz
  • Signal level: -65 – -25 dBm
  • Input impedance: 75 ohms
  • Polarization: vertical: +14 ± 0.5 V, horizontal: +18 ± 0.5 V
  • Switching control: 22KHz
  • Modulation: DVB-S: QPSK and DVB-S2: QPSK, 8PSK
  • Input bit rate: 2 – 45 Msym/s for DVB-S, at least 30 Msym/s for DVB-S2
  • FEC decoder: QPSK: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6,7/8, 8/9, 8/10 8PSK: 3/5, 2/3, 3/4, 5/6, 8/9, 9/10
  • Channel search: network, manual
  • Support for cascadable DiSEqC switches
  • Supports motorized antennas
  • Infokas, TV mail, TV chat: available
  • Teletext: VBI (ETS300472) and DVB
  • Subtitles: DVB;
  • Timer: available
  • Menu in Russian and English
  • EPG: available, ISO–8859-5 standard
  • Decodable formats: MPEG-4 AVC: H.264 [email protected], [email protected], [email protected]
  • Video decoder: HD MPEG-2/MPEG-4/AVC
  • Resolution: 1080i/720p/576p up to 1920x1080p
  • Audio decoder: MPEG-2 audio/MUSICAM Layer 1, 2
  • Audio Mode: Mono/Stereo
  • Memory: Flash memory – 32 MB; RAM – 256 MB, DDR2;
  • Audio/Video Connectors: HDMI (HDCP supported), S/PDIF, Composite RCA
  • Input connector: 169-24
  • Interface connector: USB
  • Built-in conditional access system: DRE Crypt versions 1, 2 and 3
  • Input voltage: alternating current 220 (+22/-33) V, 50 Hz
  • Smart card slot available
  • Electricity consumption: no more than 25 W (in standby mode - less than 1 W)
  • Dimensions: 250x180x38 mm
  • Weight: 1 kg
  • Operating temperature: 0°С – +45°С
from October 17, 2013.

Version for updating the software of HD 9303 and HD 9305B receivers for Tricolor TV subscribers in the central region.
The use of this version of the software in the Siberian region is unacceptable, since there is no support for searching for Tricolor TV-Siberia channels.

It will not be possible to return the previous version of the software.

After the update, all channels will be deleted.

Compared with previous versions software:

  1. The work of the Tricolor TV Cinemas service has been improved.
  2. The work of the TV Mail service has been improved.
  3. Improved receiver stability.

GS-9305HD

from October 17, 2013.

Past releases

HD-9305B_Ver_0.31.136 from May 14, 2013

Software for digital satellite receiver HD9305B

GS-9303HD

GS-9303HD_GS-9305HD_Ver_0.33.164_TricolorTV from October 17, 2013.

GS-9303HD_Ver_0.31.131_TricolorTV-Siberia from January 31, 2013

  1. The “Status” menu has been redesigned. Two options for displaying information have become available: short (contains the most frequently used data, including information about the ID number); extended (contains all information about the receiver) - called up by pressing the Red button (“F1” or “i”) on the remote control while in the “Status” menu.
  2. The general list of TV channels, called up by pressing the “OK” button, has been redesigned. Became available additional lists, the channels in which are grouped according to topic. Switching through the lists is carried out using the Green button on the remote control from the general list of TV channels.
  3. Added the “Payment” information menu - an information block containing a description of the main methods of payment for Tricolor TV services.
  4. Improved EPG performance.
  5. For the operator "Tricolor TV-Siberia" the transponder database and search algorithm have been updated.

Before updating, read the instructions in the archive.

Past releases

2012_12_13_HD9303_hw47_0.30.104.rar - official firmware for GS 9303 from 12/13/2012 ver.0.30.104

2012_06_26_HD9303_hw47_0.10.37.rar - official firmware for GS 9303 dated 06/26/2012 ver.0.10.37

2011_12_15_HD9303_hw47_0.9.111.rar - official firmware for GS 9303 dated 12/15/2011 ver.0.9.111

Updating software for HD-9303 receivers from satellite

On December 13, 2012, new software will be launched from the Eutelsat W4 satellite for the HD-9303 model receivers and its module, aimed at improving and improving the performance of this receiving equipment. Viewers of Tricolor TV will be able to update the receiver and module software at any time from December 13, 2012 to January 17, 2013.

The software is designed to update equipment of the HD-9303 model with receiver software version 0.9.111,0.10.37,0.30.74 and module software version 02.00.11.

Once the update is complete, the receiver software version should change to 0.30.104. The module software version should change to 01/02/00.
New software will be downloaded from the air.

Updating the software of this receiving equipment consists of 2 stages: updating the receiver software and updating the module software.

Attention! The receiver and module software can be updated in any order, but the sequence of actions for each update stage is maintained!

To update the software of the receiving equipment, you must perform the following steps:

1. Unplug the receiver's power cord from the outlet, and then plug the receiver back in.

2. Switch to the “Tricolor TV FullHD info channel” (button “0” on the remote control).

3. After a few seconds, the following message will appear on the screen indicating the need to update the receiver software:

When of this message press the "OK" button on the remote control.

If you want to delay the update process, select "No" from the message on the screen. You will be prompted to update the software again when next switch on receiver You will be able to install new software at any time convenient for you in the period from December 13, 2012 to January 17, 2013.

4. After agreeing to the update, service messages about the process of updating the receiver software will begin to appear on the screen. The type of messages is shown below. The software update takes about five minutes.

5. When the software update is completed, the receiver will automatically turn off and then turn on on the Information TV channel "Tricolor TV".

6. After 1-2 minutes, service messages about the module software update process will begin to appear on the TV screen. Appearance messages are presented below.

7. You must wait until the service message of the form “Initializing module” disappears.

Attention! During the software update, do not turn off the power to the receiver! Otherwise, the receiver may fail!

8. Next, you need to make sure that the updates are installed. To do this, check the software versions by pressing the “MENU” button on the receiver’s remote control and selecting “Status”. The “Software Version” line should indicate “ 0.30.104", and in the line “Module software version” - “ 02.01.00"

9. After updating the receiver software, in the process of switching channels, you will be prompted to update the list of channels and genres. Confirm the update by selecting "YES".

10. After searching for channels, a message indicating the successful completion of the update will be displayed. Click “OK” to close the message.

This completes the software update for the receiver and module. The receiver is ready for further operation.

Description new version BY:

New software is designed to increase the level of security receiving equipment and ensure the stability of its operation, as well as make it usable when watching TV channel packages and using additional services"Tricolor TV" is more convenient.

New functionality has been added to the software in the interface of the Tricolor TV Cinemas package. Some buttons have received additional functions, for example, pressing the Red button brings up a description of the selected movie, Green - options for sorting the list of films (alphabetically, by genre, by upcoming shows, by newness in the schedule), Yellow - a list of films for which the timer was set, Blue - a list films that will be available for viewing the next time the repertoire is updated.

For the convenience of subscribers, the “Status” menu has been redesigned. After the update, the subscriber will have two options for displaying information:

Brief (contains the most frequently used data, including information about the ID number) - displayed when you go to the “Status” menu item;

Advanced (contains all information about the receiver) - called by pressing the Red button (“F1” or “i”) on the remote control while in the “Status” menu.

The general list of TV channels (displayed on the TV screen when you press the “OK” button) has also been redesigned. Now you can group TV channels into thematic categories, such as Entertainment, Business, Educational, TV shopping, Foreign, and others. Switching between categories is carried out using the Green button on the remote control from the general list of TV channels.

FAQ:

Question: Why do I need to update the software?

Answer: The new version of the software for the HD 9303 receivers features new, more user-friendly interface services "Cinema halls "Tricolor TV", the "Status" menu has been redesigned, and changes have been made to system settings receiver, which increases the stability of its operation.

Question: Why information window“Status” began to look different? Where did some of the items that were there before go?

Answer: For the convenience of subscribers, the “Status” menu has been redesigned. Now you have two options for displaying information: short (contains the most frequently used data, including information about the ID number) and extended (contains all information about the receiver). So, for example, items such as “Version hardware", "Module firmware" and Database version" can only be seen in the extended version of the window, which can be called up by pressing the Red button ("F1" or "i") on the remote control while in the "Status" menu.

Question: Why did they change? function buttons in the interface of the Tricolor TV Cinemas package?

Answer: The new version of the software has implemented additional features interface of the Tricolor TV Cinemas package. Now, by pressing the Red button, you can read the description of the selected movie, Green - select one of possible options sorting the list of films (alphabetically, by genre, by upcoming shows, by newness in the schedule), Yellow - to see the list of films for which the timer was set, Blue - to see the list of films that will be available for viewing the next time the repertoire of the "Cinema Halls" package is updated "Tricolor TV". Also in the new version of the software, it is possible to display the interface of the “Tricolor TV Cinemas” package when you click on the “Order a movie” or “Split File” button when watching/listening to any television or radio channel, and not just, as was previously the case , when watching the TV channel "TV.Poisk".

Question: Why is the “Genres” button needed in the general list of TV channels?

Answer: This function allows you to group the list of TV channels by thematic groups for ease of navigation. By switching lists, you can choose the most interesting group TV channels, including Entertainment, Business, Educational, TV shopping, Foreign, and others.

Receiver firmware via USB service port.

Receiver software update.
1.Copy files to the root directory of the flash drive update.info And 2012_06_26_HD9303_hw47_0_10_37.dre
2.Insert the USB flash drive into a working receiver and agree to the update.

NKE software update.
1. Delete the receiver software files from the flash drive.
2. Copy the file to the root directory of the flash drive nke.bin, containing NKE-1 software.
3. Insert the USB flash drive into a working receiver. NKE firmware is installed without any indication.
4. After 30-60 seconds, the receiver will begin to reboot; at the moment the image disappears from the TV screen, you must immediately disconnect the flash drive from the receiver.

Attention! Broadcasting software updates from satellite for Tricolor TV subscribers. Center" is temporarily suspended.

Check .

Check whether software can be updated via the network either by (links to current versions The software is located in the description of the receiving equipment model).

On April 12, 2017, new software was launched for receivers of the HD 9303, HD 9305 models, aimed at improving and improving the operation of this receiving equipment.

Before starting the update, go to the “Status” menu item and write down the values ​​​​indicated in the lines “Receiver software version” and “Module software version”.
After performing the update, the receiver software version should change to 1.35.324 .

ATTENTION! Never turn off the power to the receiver until the update procedure is complete! Otherwise, the receiver may fail!

To update the receiver and module software, you must perform the following steps:

1. Unplug the receiver's power cord from the outlet, and then plug the receiver back in.
2. Switch the receiver to channel number 333 in the general list.
3. After a few seconds, the following message will appear on the screen indicating the need to update the receiver software:

When this message appears, select the “Yes” option and press the “OK” button on the remote control.

4. After agreeing to update the receiver software, service messages about the process of updating the receiver software will begin to appear on the screen. Updating the receiver software takes about five minutes.



5. Once the software update is complete, the receiver will reboot and enter channel viewing mode.

6. After the software update is completed, go to the “Status” menu and make sure that the receiver software version has changed to 1.35.324.


7. At this point, the receiver software update is completed, and the receiver is ready for further operation.

HD Satellite Receiver GS 9305, new 2013. Manufactured by General Satellite, the company is a manufacturer of operator equipment satellite television Tricolor TV. The receiver allows you to receive all Tricolor packets such as: Maximum HD, Optimum, Super-Optimum, and also additional packages: Cinema halls Tricolor TV, radio package, etc. The receiver is equipped with a built-in access module DRE Crypt version 3.

The satellite receiver is sold in a colorful box, equipped with indoor unit nutrition. The receiver is equipped with: remote control, AAA batteries - 2 pcs., HDMI cable 0.7 meters, Tricolor TV HD smart card. The price of the receiver includes a subscription to the packages: Maximum HD, Optimum and Super-optimum for a period of 1 year.

Receiver Tricolor TV HD-9305 It has compact dimensions, receiver dimensions (mm): 250*180*38. The Tricolor TV HD receiver is based on the ST7111 processor, with 32 MB of flash memory and 256 MB of RAM.

The HD 9305 receiver allows you to receive Tricolor TV television channels in the following formats: MPEG2, MPEG-4/AVC, the picture is reproduced on the TV with resolutions of 1080i/720p/576p. Allows the signal to be received in both DVB-S standard, and in DVB-S2, in the frequency range from 950 to 2150 MHz.

Today, it is the most functional, in terms of options, model of a satellite HD receiver from the list recommended by the Tricolor TV television company, allowing you to view the “Maximum HD” package, which includes more than 25 channels in HDTV quality.

Unlike the GS 8306 model, in GS 9305 has several additional options: allows you to work with motorized systems, DISEq switches, this makes it possible to connect several satellite dishes, and receive signals from different satellites, for example: Hotbird, Astra, Sirius, etc.

Unlike the GS 9303 model, the HD 9305 receiver is equipped with a bell connector - this allows simultaneous operation HDMI output and bells, this option may be useful if you intend to breed television signal on several televisions, with the condition that all television receivers will display the same channel. For separate viewing, it is necessary that a satellite receiver be connected to each TV.

The receiver has the following functions: detailed program TV shows, with detailed descriptions and announcements of films and programs, which is called TV guide (EPG), teletext, TV chat, TV mail Tricolor TV, subtitle support, timer, etc.

This device has the richest functionality and is equipped with an SPDIF optical output, which allows you to connect audio systems.

You can always buy GS 9305, or buy a Tricolor TV set, from our company, phone number in Murmansk: 23-63-35 and 750-335.

Description of the connectors and front panel of the HD 9305 receiver

The dimensions of the HD receiver are similar to previous models such as: GS 9303. On the front panel of the receiver there is a key to turn on/off the satellite receiver, a slot for a Tricolor TV smart card, the card is inserted with the chip facing up.

Front panel GS 9305


The satellite receiver is equipped with a 7-segment 4-digit display that displays: reception indication satellite signal, TV/Radio mode indication, time display, etc.

1. Screen - shows the number of the received television channel or radio station, special characters indicating the reception of a satellite signal, television/radio broadcasting modes, standby, mail symbol, current time.
2. “STANDBY” KEY - is intended to switch between standby mode and operating mode. Green key indication - operating mode of the HD 9305 receiver. Red key indication - standby mode.
3. Keys - go to the next / previous channel or radio station.
4. KEY “TV/R” - transition from the mode of receiving Tricolor channels to receiving radio stations.
5. Connector FOR SMART CARD Tricolor TV

Next/Previous keys TV channel or radio station (3), keys for switching modes for receiving channels or radio stations (41, smart card connector (5) is located under the folding right side of the front panel satellite receiver.

Rear panel of HD 9305

1. “LNB OUT” CONNECTOR - an output with which you can connect the next Tricolor TV receiver, the so-called loop output.
2. “LNB IN” CONNECTOR - input for connecting coaxial cable, coming from the satellite dish converter.
3. “USB” port - designed for connecting a flash drive, used when updating the firmware of a satellite receiver.
4. “CVBS” CONNECTOR - composite analog video signal output (yellow connector). Used when connecting the receiver to a TV in standard SD broadcast mode.
5. “AUDIO L/R” CONNECTOR - two outputs for connecting audio. The right channel (R) is a red connector, the left channel (L) is white.
6. “HDMI” CONNECTOR - used when connecting an HD satellite receiver to a TV in HDTV mode.
7. “S/PDIF” CONNECTOR - connector for connecting an optical audio cable. Digital audio output.
8. “POWER” SWITCH - switch for the electrical power supply of the receiver. Position 0 - off, position I - on.

Remote control for satellite receiver GS 9305

The remote control is similar to the remote control of previous models: GS 9300 and GS 9303. The remote control can be divided into three segments:

The first segment answers - flipping through TV and radio channels, switching TV and RADIO channel modes, the Satatus button makes it possible to see the Tricolor TV receiver ID, software version and other technical data.

The second segment is a call to the menu of television and radio channels using the OK button, there are also keys for scrolling through channels and adjusting the volume. At the bottom there are multi-colored keys to control the GS9305 submenu.

The lower segment is not used in the current receiver configuration.

More detailed description keys on the receiver's remote control are shown below:

1. “STANDBY” - switches between standby mode and operating mode.
2. “CLOCK” - used to reflect the current time in the right top corner screen and on the front panel screen of the HD satellite receiver Tricolor TV.
3. “MUTE” - Used to mute/unmute (after muting) the sound.
4. “STATUS” - Calls the “Status” menu, including special information to contact Tricolor TV customer support or service center. 5. NUMERIC BUTTONS 0-9 - Used to call TV and radio channels by number and enter numeric data.
6. “*” - The button is not used in basic configuration BY satellite tricolor TV HD receiver.
7. “GAME” - Used to call up the games menu of the HD receiver.
8. CURSOR CONTROL BUTTONS - Used to move between menu items, as well as to select the types of any settings. When viewing/listening to channels or radio stations, the keys switch to a television channel or radio station forward/backward in the list; adjust the volume.
9. “LAST” - switching to the previous watched/listened to TV or radio channel.
10. GREEN - Used to call up the list of available TV or radio channels for a given TV or radio channel audio tracks.
11. RED - Used to call an information banner. When watching/listening to a TV or radio channel, pressing a key once will bring up an information banner. A second click activates the extended information banner.
12. “HD MODE” - Allows you to set the resolution with which the video image will be output to HDMI interface.
13. “GUIDE” - Activates the TV guide.
14. “VOL” BUTTONS - adjust the volume level in the mode of viewing channels or listening to radio stations.
15. BLOCK OF BUTTONS “PVR” AND “TIMESHIFT” - The buttons are not used in the basic configuration of the receiver software.
16. “TV MAIL” - Button to call the “Tricolor TV-Mail” service.
17. “TV SNAT” - The button is not used in the basic configuration of the receiver software.
18. “INTERNET” - The button is not used in the basic software configuration of the tricolor TV HD receiver.
19. “MENU” - Calls up the “Main Menu” of the GS 9305. In viewing mode, the menu is used to exit the menu and return to watching a TV channel or listening to radio stations from the Tricolor radio package.
20. “CH” BUTTONS - move forward or backward through the list of television or radio channels in viewing/listening mode.
21. “REC LIST” - not used in the basic configuration of the receiver software.
22. “IMAGE FORMAT” - Allows you to change the format of the output video image (“As is”, “Envelope”, “Pan-Scan”, “Combined”).
23. BLUE - call lists of favorite TV and/or radio channels.
24. YELLOW - menu for working with teletext and subtitles.
25. “EXIT” - interrupt/cancel operations, go to the previous menu screen, exit from the “Main Menu”.
26. “OK” - When watching a TV channel or listening to a radio station, calls up a list of television and/or radio channels. In other cases, select menu items or confirm input.
27. “HELP” - not activated.
28. “#” - not used.
29. “TV/RADIO” - switching between modes of receiving television and radio channels.
from October 17, 2013.

Version for updating the software of HD 9303 and HD 9305B receivers for Tricolor TV subscribers in the central region.
The use of this version of the software in the Siberian region is unacceptable, since there is no support for searching for Tricolor TV-Siberia channels.

It will not be possible to return the previous version of the software.

After the update, all channels will be deleted.

Compared to previous software versions:

  1. The work of the Tricolor TV Cinemas service has been improved.
  2. The work of the TV Mail service has been improved.
  3. Improved receiver stability.

GS-9305HD

from October 17, 2013.

Past releases

HD-9305B_Ver_0.31.136 from May 14, 2013

HD9305B Digital Satellite Receiver Software

GS-9303HD

GS-9303HD_GS-9305HD_Ver_0.33.164_TricolorTV from October 17, 2013.

GS-9303HD_Ver_0.31.131_TricolorTV-Siberia from January 31, 2013

  1. The “Status” menu has been redesigned. Two options for displaying information have become available: short (contains the most frequently used data, including information about the ID number); extended (contains all information about the receiver) - called up by pressing the Red button (“F1” or “i”) on the remote control while in the “Status” menu.
  2. The general list of TV channels, called up by pressing the “OK” button, has been redesigned. Additional lists have become available, the channels in which are grouped according to topic. Switching through the lists is carried out using the Green button on the remote control from the general list of TV channels.
  3. Added the “Payment” information menu - an information block containing a description of the main methods of payment for Tricolor TV services.
  4. Improved EPG performance.
  5. For the operator "Tricolor TV-Siberia" the transponder database and search algorithm have been updated.

Before updating, read the instructions in the archive.

Past releases

2012_12_13_HD9303_hw47_0.30.104.rar - official firmware for GS 9303 dated 12/13/2012 ver.0.30.104

2012_06_26_HD9303_hw47_0.10.37.rar - official firmware for GS 9303 dated 06/26/2012 ver.0.10.37

2011_12_15_HD9303_hw47_0.9.111.rar - official firmware for GS 9303 dated 12/15/2011 ver.0.9.111

Updating software for HD-9303 receivers from satellite

On December 13, 2012, new software will be launched from the Eutelsat W4 satellite for the HD-9303 model receivers and its module, aimed at improving and improving the performance of this receiving equipment. Viewers of Tricolor TV will be able to update the receiver and module software at any time from December 13, 2012 to January 17, 2013.

The software is designed to update equipment of the HD-9303 model with receiver software version 0.9.111,0.10.37,0.30.74 and module software version 02.00.11.

Once the update is complete, the receiver software version should change to 0.30.104. The module software version should change to 01/02/00.
New software will be downloaded from the air.

Updating the software of this receiving equipment consists of 2 stages: updating the receiver software and updating the module software.

Attention! The receiver and module software can be updated in any order, but the sequence of actions for each update stage is maintained!

To update the software of the receiving equipment, you must perform the following steps:

1. Unplug the receiver's power cord from the outlet, and then plug the receiver back in.

2. Switch to the “Tricolor TV FullHD info channel” (button “0” on the remote control).

3. After a few seconds, the following message will appear on the screen indicating the need to update the receiver software:

When this message appears, press the “OK” button on the remote control.

If you want to delay the update process, select "No" from the message on the screen. You will be prompted to update the software again the next time you turn on the receiver. You will be able to install new software at any time convenient for you in the period from December 13, 2012 to January 17, 2013.

4. After agreeing to the update, service messages about the process of updating the receiver software will begin to appear on the screen. The type of messages is shown below. The software update takes about five minutes.

5. When the software update is completed, the receiver will automatically turn off and then turn on on the Information TV channel "Tricolor TV".

6. After 1-2 minutes, service messages about the module software update process will begin to appear on the TV screen. The appearance of the messages is shown below.

7. You must wait until the service message of the form “Initializing module” disappears.

Attention! During the software update, do not turn off the power to the receiver! Otherwise, the receiver may fail!

8. Next, you need to make sure that the updates are installed. To do this, check the software versions by pressing the “MENU” button on the receiver’s remote control and selecting “Status”. The “Software Version” line should indicate “ 0.30.104", and in the line “Module software version” - “ 02.01.00"

9. After updating the receiver software, in the process of switching channels, you will be prompted to update the list of channels and genres. Confirm the update by selecting "YES".

10. After searching for channels, a message indicating the successful completion of the update will be displayed. Click “OK” to close the message.

This completes the software update for the receiver and module. The receiver is ready for further operation.

Description of the new software version:

The new software is designed to increase the level of security of receiving equipment and ensure the stability of its operation, as well as make its operation when watching TV channel packages and using additional Tricolor TV services more convenient.

New functionality has been added to the software in the interface of the Tricolor TV Cinemas package. Some buttons have received additional functions, for example, pressing the Red button brings up a description of the selected film, Green - options for sorting the list of films (alphabetically, by genre, by upcoming shows, by newness in the schedule), Yellow - a list of films for which it was installed timer, Blue - a list of films that will be available for viewing the next time the repertoire is updated.

For the convenience of subscribers, the “Status” menu has been redesigned. After the update, the subscriber will have two options for displaying information:

Brief (contains the most frequently used data, including information about the ID number) - displayed when you go to the “Status” menu item;

Advanced (contains all information about the receiver) - called by pressing the Red button (“F1” or “i”) on the remote control while in the “Status” menu.

The general list of TV channels (displayed on the TV screen when you press the “OK” button) has also been redesigned. Now you can group TV channels into thematic categories, such as Entertainment, Business, Educational, TV shopping, Foreign, and others. Switching between categories is carried out using the Green button on the remote control from the general list of TV channels.

FAQ:

Question: Why do I need to update the software?

Answer: The new version of the software for HD 9303 receivers has implemented a new, more convenient interface for the “Tricolor TV Cinemas” service, the “Status” menu has been redesigned, and changes have been made to the system settings of the receiver, which increases the stability of its operation.

Question: Why does the “Status” information window look different? Where did some of the items that were there before go?

Answer: For the convenience of subscribers, the “Status” menu has been redesigned. Now you have two options for displaying information: short (contains the most frequently used data, including information about the ID number) and extended (contains all information about the receiver). For example, items such as “Hardware version”, “Module firmware” and Database version” can only be seen in the extended version of the window, which can be called up by pressing the Red button (“F1” or “i”) on the remote control while in the "Status" menu.

Question: Why have the functional buttons changed in the interface of the Tricolor TV Cinemas package?

Answer: In the new version of the software, additional interface features of the Tricolor TV Cinemas package have been implemented. Now, by pressing the Red button, you can read the description of the selected film, Green - select one of the possible options for sorting the list of films (by alphabet, by genre, by upcoming shows, by newness in the schedule), Yellow - see the list of films for which it was installed timer, Blue - see the list of films that will be available for viewing with the next update of the repertoire of the Tricolor TV Cinemas package. Also in the new version of the software, it is possible to display the interface of the “Tricolor TV Cinemas” package when you click on the “Order a movie” or “Split File” button when watching/listening to any television or radio channel, and not just, as was previously the case , when watching the TV channel "TV.Poisk".

Question: Why is the “Genres” button needed in the general list of TV channels?

Answer: This function allows you to group the list of TV channels into thematic groups for ease of navigation. By switching the lists, you can select the most interesting group of TV channels, including Entertainment, Business, Educational, TV shopping, Foreign, and others.

Receiver firmware via USB service port.

Receiver software update.
1.Copy files to the root directory of the flash drive update.info And 2012_06_26_HD9303_hw47_0_10_37.dre
2.Insert the USB flash drive into a working receiver and agree to the update.

NKE software update.
1. Delete the receiver software files from the flash drive.
2. Copy the file to the root directory of the flash drive nke.bin, containing NKE-1 software.
3. Insert the USB flash drive into a working receiver. NKE firmware is installed without any indication.
4. After 30-60 seconds, the receiver will begin to reboot; at the moment the image disappears from the TV screen, you must immediately disconnect the flash drive from the receiver.







2024 gtavrl.ru.