The phone does not load beyond the logo, what should I do? Lenovo phone won't turn on

When choosing a phone, each of us pays special attention to its reliability. We read user reviews, study the technical characteristics of the device, etc. And in this regard, gadgets from Lenovo look like one of the best options.

But in any case, sooner or later the smartphone will stop working. There are many reasons for this, and only a specialist can understand exactly why the phone stopped functioning.

But in general outline It is quite possible to determine why you cannot start your smartphone if you take into account some of the features of its functioning. In this article, we will tell you why Lenovo phone usually does not boot.

If the phone stops turning on, it is very likely that its battery is faulty. Over time, the battery capacity decreases, and it no longer allows the device to be sufficiently autonomous. This problem is well known to owners of all mobile devices from any manufacturer.

It is quite possible that the reason is that the charger or the connector for connecting it to the smartphone is faulty. As a rule, replacing the battery usually helps in this situation.

Lenovo won't boot due to software failure

Sometimes a Lenovo phone does not turn on due to a software problem. How to distinguish software malfunction from the hardware room? There is a proven method: if the LED blinks when turned on, then the problem is in the software.

There are many reasons for software failures. Most often, they result from the user installing software from unverified sources, various applications containing viruses, etc.

If your phone worked fine, and then repeatedly rebooted on its own, and after rebooting does not start, then there are exactly two options:

1. Contact specialists to determine why your Lenovo phone does not turn on;
2. Perform a factory reset, in other words, do a Hard Reset;
3. Reflash your mobile device.

The last two methods actually work even at home if your Lenovo phone does not turn on, and you can easily implement them on your own. But remember: if you did a flashing or Hard Reset, this will automatically delete all data from the smartphone. Therefore, it is recommended to periodically save them on an alternative medium so as not to get into an unpleasant situation. This applies not only to photos and videos, but even to SMS and contacts in the phone book.

But if the phone runs on the Android platform (and Lenovo smartphones operate on it), then everything is much simpler. Most models support data synchronization with a cloud resource. All you need to do is ensure that your contacts and media files are regularly saved to the cloud on the Internet. Then even if you don’t boot into your phone and you have to reflash it or reset it, all important information will be accessible from any other gadget after authorization in the system. Well, after repairing or changing the firmware, go back to your own profile from your phone.

Preventing software failures

In order not to wonder “the phone won’t turn on - what to do,” it is best to know how to prevent such a situation. It's not difficult at all and won't require any effort on your part.

It is quite logical that the beginning of the end of the work of one or another operating system becomes the installation of various applications that in one way or another interfere with normal functioning.

In order for the phone to boot normally, stop installing and using “heavy” applications. When buying a gadget, you get acquainted with its technical characteristics. And if, for example, it is not intended for games and is not equipped with the most powerful video accelerator, it is irrational to install it on such a gadget latest games. Even at medium settings, they will lead to the hardware platform slipping, which will negatively affect the performance and durability of the mobile device.

By at least, once every couple of months, clean your phone from unnecessary files. They appear regardless of your desire while the phone is running applications. To do this, use the “Application Manager”, available in the options of any smartphone, or third party program. For example, it could be CleanMaster.

If you keep your phone clean, the chances of seeing your phone not turning on will be minimized.

Mechanical breakdowns

Often the problem with phones that won't turn on is mechanical damage or water getting inside the case. Most often they do not start mobile devices due to damage to the processor or matrix.

In such a situation, it is necessary to establish the cause of the breakdown. If you can do this yourself, then take care of timely repair of the gadget. But it’s better to immediately give your smartphone to specialists for diagnostics so that they can fix the problem and you will get a working gadget again.

The phone fell into the water: what to do?

Many people are concerned about what to do if their mobile device does not turn on after falling into water. As you know, the aquatic environment is dangerous for the internal elements of smartphones, so you need to react as quickly as possible.

First of all, remove back cover and remove the battery. Use a hairdryer to dry your phone. Place the device in some container with rice - it absorbs moisture perfectly. After a couple of hours, insert the battery back and try to turn on the gadget. If the phone does not turn on even after this, we recommend that you contact a specialist.

The cause of the breakdown is unclear

If you have done everything stated above, but cannot figure out how to turn on the phone, there is only one way out - contact a repairman. Not being an expert and trying to fix it yourself mobile gadget, you can harm it if you incorrectly determine the cause of the breakdown. There are many reasons why a smartphone may not turn on. And only specialists with sufficient qualifications and experience can find out what happened to your phone.

So take care of your mobile devices, and if you notice any irregularities in their operation, try to prevent the problem so as not to deal with it in the future. Well, if the phone no longer turns on, and it is difficult to visually determine the cause of the problem, we advise you to immediately go to a repair specialist.

Hi all. Today I would like to look at all the most common reasons why an Android smartphone may not turn on. I will not touch on situations where disassembling the phone and interfering with the electronics is required, since this is the work of completely different specialists.

If your smartphone or tablet suddenly stops turning on, you don’t have to immediately run to a service center or workshop and have it repaired. Most likely, there is a chance that you can do it on your own and save some money (programs for managing home accounting on Android, look for them on the blog). Below we will look at the main measures that can be taken if your Android smartphone or tablet does not turn on. So, let's get started.

Android phone won't turn on. 5 ways to solve the problem.

Method No. 1

From my own experience, I will say that in 80% of all cases, if they come to me with a problem that the phone does not turn on, the whole problem turns out to be a dead battery. And I understand perfectly well when they tell me that they’ve been charging their smartphone all day, but it still won’t turn on. Some devices have one unpleasant feature- if you discharge the battery too much, it will not charge, even if you keep it charging all day.

In this case, a frog-type charger will help us, which allows you to charge almost any battery directly by removing it from the phone. It is enough to recharge the battery in this way for 15 minutes. Then you insert it back and put the phone on charge as usual, everything should be OK.

If getting a frog is problematic for you, then you can use any old cell phone charger. Cut off the old plug and protect the wires.

Make sure that the charger is not connected to the outlet at this time.

We fix the exposed wires to the battery with tape for a few minutes.

Important. Do not reverse the polarity.

Method No. 2

Faulty charging. Of course, the second thing to check is the serviceability charger. Everything is simple here - we take a known working charger and try to charge our smartphone. If the process has started, then we buy a new one and rejoice. Although it sounds banal, it helps every fifth person.

Method No. 3

If the phone does not turn on, then perhaps it is simply frozen. To revive your device, we’ll use a long-known but still relevant method - remove the battery and reinsert it.

Unfortunately this technique doesn't work for many people. modern phones With non-removable battery. In this case, to reboot you need to find the reset button and press it, for example with a paper clip. It can be anywhere, but, as a rule, it is located near the SIM card slot or on the back of the smartphone or tablet. Near the reset button there is sometimes a message reset or off. The photo below is an example of the location of such a button in a smartphone.

Method No. 4

This method is applicable if your phone not only does not turn on, but does not turn on completely. For example, it gets stuck on your Android logo and nothing else happens. This happens due to a glitch in the smartphone software. Then a hard reset will help us ( hard reset) or, translated, hard reset. It is done differently for each device model. To find out how, enter the name of your phone and the words hard reset, for example LG G3 hard reset, in Google or Yandex and follow the instructions. In the future I hope to create a blog separate section on this topic.

Unfortunately, not all smartphones support hard reset; it depends on the recovery installed in the device. If you are interested in learning more about what it is, search the Internet.

For example, this function is not available by default in many Sony phones, but the manufacturer has provided the ability to restore the software using special utility Sony pc companion.

Method No. 5

Not often, but it still happens that smartphone won't turn on due to the fact that the contacts under the battery do not reach. To fix this, you need to use tweezers or a small screwdriver to bend the contacts to improve the connection to the battery. The main thing here is to avoid fanaticism, otherwise you will only make things worse.

Let's look at it in order: first about the reasons, and then what to do. Some problems can be solved on their own, while some will have to be addressed to a service center.

This article is suitable for all brands that produce phones on Android 9/8/7/6: Samsung, HTC, Lenovo, LG, Sony, ZTE, Huawei, Meizu, Fly, Alcatel, Xiaomi, Nokia and others. We are not responsible for your actions.

Causes of failure and why it turns on but does not boot

⭐️⭐️⭐️⭐️⭐️ If Android does not load on your phone or tablet when you turn it on, or your Android smartphone starts but does not go beyond the logo splash screen, then the reasons for this may be the following:

• Errors when flashing the device. These include installing an inappropriate or damaged assembly, out-of-order firmware, power failure, and other factors.
• Lack of memory. The system may not start due to lack of memory. The solution may be to delete unnecessary data.
• Incompatible with memory card. If your smartphone turns on but does not boot completely, try removing the memory card and trying to restart the system.
• Hardware problems that occur after impact, fall, liquid ingress, or exposure to extreme temperatures.
• Damage to the power button or its cable, which “shorts” the phone and it goes into a cyclic reboot, loading up to the logo and then in a circle. We encounter this from time to time and can only be diagnosed at a service center.

Before you try to troubleshoot Android, you need to understand why the system won't boot.

Restoring functionality

If the phone shows that the charge is going on, then the causes of the problem must be looked for in the operation Launcher Android. If your device vibrates or its screen flickers, there is a possibility that the screen is damaged.

If you determine that the problem is software in nature (for example, the problem arose after a firmware update), then a simple reboot will not help. The system must be reset via Recovery Mode or reflash the device. Let's see what to do:

1. While holding down the power button and the volume down key (there may be other combinations, look for your model), go to Recovery Mode. If the phone is , then the problems are at a deeper level, so you need to contact a service center.
2. Perform a factory reset by selecting "Wipe" data factory».
3. Select "Reset" to reboot the device.

This will delete the user's personal data and settings. If this method does not help, perform a flashing. To do this, upload the file with the appropriate firmware to the root of the memory card, insert the drive into the phone and select “Install zip from sdcard” in Recovery Mode.

Increase

WITH software glitch You can do it yourself, but how to fix hardware problems? The most reasonable option is to contact a service center for diagnostics and repairs.

Extracting information from a broken Android

Even if the problem can be solved without financial investment, by simply flashing the firmware, users experience important question— how to save data stored in the phone’s memory. There are no problems with the memory card: you just need to remove it from the device. But how to save data from internal storage? For example, pull out contacts.

Increase

If you did backup copy system or at least, then it will be very easy to get contacts. All you have to do is go to the Contacts app on the Google website to see full list synchronized contacts. If you want to transfer them to another device, all you need to do is add Google account.

Increase

To make it just as easy to get other information, you need to periodically make backups. copy of Android. Then if

In our world, people can no longer imagine life without a smartphone. He became an extension of our hand. For most people, the breakdown of their favorite gadget will cause panic and hysteria. This, of course, is not very good, but you have to put up with it. Modern mobile devices are very capricious things. Sometimes they behave unpredictably. In order not to be left without communication, you need to know what to do with the device if it suddenly “kicks up” and does not react in any way to the user’s actions. The most common problem with gadgets is that the phone does not turn on beyond the splash screen. What can you do to revive your “pet”? Let's try to answer this.

Possible causes of failure

There are several reasons for this behavior of the smartphone. And depending on them, the decision on repairs will be made. The first (and most common) reason that the phone does not turn on beyond the Android screensaver is a failure during the installation of an operating system update. This happens because the Android OS is not very stable. That's not so bad. However, the same result can occur after the device is dropped from a considerable height. This is much worse.

Also common reasons may be a malfunction of the battery, charger, or the gadget charging connector itself. Now let's look at the screensaver. In most cases, you can fix everything yourself. Fatal breakdowns are extremely rare. But at the initial stage, the main thing is to correctly diagnose the problem in order to avoid making mistakes in the future.

System failure

This is the safest thing ever. If the operating system crashes, you need to go into recovery mode and reset the factory settings with clearing the cache. Be careful! After this procedure there will be no one left third party application, user installed. You can enter recovery by simultaneously pressing the volume up button and the power button. True, for various models There can be different combinations of devices. Then you need to go to the point Wipe data and factory reset and confirm your choice. Then you need to check the box Reboot system now. after this the phone will reboot. If everything is fine, then the reason why the phone does not turn on further Lenovo screensavers, was precisely a system failure.

Sometimes resetting to factory settings doesn't help. Then there is another option. You just need to reflash the phone. It's not that hard to do. The Internet is full of instructions for each specific smartphone. And at any adequate forum they will be happy to help you implement your plans. Don't lose heart.

If the reason is the battery and charging

You can check this very simply. It is enough to find a similar battery and a similar charger somewhere. If, after replacing all the components, you do not see any changes, then the reason is that HTC phone does not turn on beyond the splash screen, much deeper than you thought. There are only two options: damage to the charging socket or the board itself.

Dealing with a faulty battery or a “glitched” charger is easy. These are not particularly expensive smartphone components. They can simply be replaced with new ones. The problem with the hardware board will be much more noticeable. Here (in most cases) you can’t do without a visit to the workshop. Sometimes you have to pay a very significant amount for repairs.

If the reason is in the board and hardware

It is very difficult to do something about this on your own. You need to have some knowledge of radio electronics and own the appropriate tools. If you have all this, then you can easily solve the problem. But if the phone does not turn on beyond the splash screen for a reason faulty board, and you don’t understand anything about this matter, then it’s better to take the gadget to a service center. Because by arranging repairs on your own, you risk turning your device into a dead brick.

You can try to find a familiar specialist who repairs smartphone hardware and save on repairs. But it is unlikely that he will resuscitate your device for free. Only if this is a very good friend. But, in any case, you will have to spend money on the Magarych. And it is unknown how much this will cost.

Summary

Now you know the main reasons behind the screen saver. There are ways to combat this unpleasant phenomenon. Unless it's a hardware problem. But, as statistics show, in most cases this problem is caused by a failure of the operating system. And eliminating this annoying misunderstanding is very simple with the help of a few buttons.

Most owners modern gadgets More than once we encountered situations where the device malfunctioned or did not respond to commands. Unfortunately, almost all smartphones fail from time to time, regardless of manufacturer and price.

Today we will look at the problem when a Lenovo phone does not turn on, and we will look at the reasons for this.

Lenovo cell phones often suffer from problems with software and hardware components, especially if we are talking about budget models. One of the most common is spontaneous shutdown and lack of subsequent response to different actions user. Although the situation seems dire at first glance, only in extreme cases will it be necessary service repair or replacing a smartphone. There are three types of sources of these breakdowns:

• Hardware - a problem in the hardware after falls, temperature fluctuations, tests by the sun, moisture and sand.
• Software – directly concerns the operating system, viruses and crashes.
• External – most often, a breakdown of the charger is mistaken for a problem in the smartphone itself.

Let's take a closer look at the reasons why your Lenovo phone won't turn on and how to solve them.

Trouble-shooting

In this section, we will look at the most common faults that cause Lenovo to not turn on:

• Full battery discharge and others related problems with battery.
• Firmware update failures.
• Software problems.
• Virus attack.
• Mechanical damage to internal parts.

Battery completely discharged

Battery problems can be temporary or permanent, and they different ways solutions:

Incorrect system update

From time to time, the Android OS firmware and its shell are updated, but glitches may occur during the process. Often after installation new version system technology turns into a non-working “brick”. However, do not rush to replace it with another model; this can be solved by rolling back to factory settings.

It is done with using Recovery Mode. Three buttons are pressed simultaneously in the following sequence:

• Volume rocker.
• Without releasing the previous one, return to the Desktop key.
• In parallel with them there is a power on and off button.

A menu will appear on the screen. The pointer moves with the volume rocker up and down respectively. You must select an item Factory Reset, confirm your choice and wait for the process to complete.

If after this the smart device does not work, then you need to contact a specialist, and he will do the flashing of the system himself.

Software glitches

Even more often, Android-based cell phones do not start due to various kinds of software glitches. The manufacturer and system developers have provided for such scenarios, so they advise resetting the settings in such cases. We have already discussed how to do it above.

Please note that pressing the keys in succession will not work to start recovery mode on some models. It starts special button at the end of the body, which looks like a small hole, using a needle or a special pin that comes with the kit.

Viruses

Viruses are another popular reason for difficulties with Android technology. They get through downloading files and applications from unknown sources, and can seriously damage system data needed to run. Most likely, a flashing will be required, which will completely delete the information. But in some cases specialists service center they still take it on manual cleaning system storage from viruses and malware.

You can avoid this outcome by first downloading anti-virus software, for example, Dr.Web or ESET.

Mechanical damage and moisture ingress

Let's look at the most popular types mechanical damage, which interfere with inclusion:

• Screen failure (malfunction of the cable, display, or moisture ingress through the seams).
• The charging socket is dirty. Dust, fabric threads from clothes or crumbs get into it. you need to be careful, using a regular needle.
• Damage to gadget contacts with batteries. This can be either oxidation or mechanical impact which led to deformation.
• Damaged power button. If the device is new, then most likely it is a factory defect.
• The worst option is a burnt-out power controller that controls charging.

Ask a question to a virtual expert

If you still have questions, ask them to a virtual expert, the bot will help you find the problem and tell you what to do. Talk to him about life or just chat, it will be interesting and informative!