Standard Wi-Fi password tp link. Recover password from router backup file

Facebook

Routers Chinese firm TP-Link reliably provide sufficient data transmission security when used in various conditions operation. But routers leave the factory with firmware and default settings that allow free access to wireless networks created by future users using these devices. In order to close access to unauthorized users to your Wi-Fi network, you need to perform simple manipulations with the router configuration and password-protect it. How can I do that?

You can set a password for the TP-Link router using the wizard quick setup device or by making changes on the corresponding tab of the router's web interface. Let's consider both methods in detail. Refresh your technical knowledge of English language and go!

Method 1: Quick Setup Wizard

For the convenience of the user, the web interface of the TP-Link router has a special tool - a quick setup wizard. It allows you to quickly configure the basic settings of the router, including setting a password for the wireless network.

Open any internet browser address bar enter 192.168.0.1 or 192.168.1.1 and press the key Enter. You can view the exact address of the default router at reverse side devices.

An authentication window appears. We type the username and password. In the factory version, they are the same: admin . Click the left mouse button on the button OK.

We enter the web interface of the router. In the left column, select the item "Quick Setup" and then click on the button Next start quick setup basic parameters router.

On the first page, we determine the priority of the Internet connection source and move on.

On the second page, we indicate our location, the provider providing Internet access, the type of authentication and other data. Let's move on.

On the third quick setup page, we get to what we need. Our configuration wireless network. To enable protection against unauthorized access, first put a checkmark in the parameter field WPA-Personal/WPA2-Personal. Then we come up with a password from letters and numbers, preferably more difficult, but also so as not to forget. Put it in a line password. And we press the button Next.

On the last tab the router's quick setup wizard, all that remains is to click on Finish.

The device will automatically reboot with the new settings. Now the password is set on the router and your wifi network securely protected. The task was successfully completed.

Method 2: Section of the web interface

The second method is also possible to password-protect the TP-Link router. The router's web interface has special page wireless network configuration. You can directly go there and set the code word.

As in Method 1, we launch any browser on a computer or laptop connected to the router via wire or wireless network, type 192.168.0.1 or 192.168.1.1 in the address bar and click Enter.
We pass authentication in the window that appears, by analogy with Method 1. Login and password by default: admin. Click LMB on the button OK.
We get into the device configuration, in the left column select the item "Wireless".

In the drop-down submenu, we are interested in the parameter "Wireless Security", which we click on.

On the next page, first select the type of encryption and check the appropriate box, the manufacturer recommends WPA/WPA2 - Personal, then in the column password write your own New Password security.

Optionally, you can choose the type of data encryption WPA/WPA2 - Enterprise and the invented fresh code word to enter into the line Radius Password.

The WEP encoding option is also possible, and then we type the passwords in the key fields, they can be used up to four pieces. Now you need to save the configuration changes with the button Save.

Next, it is advisable to restart the router; for this, open the system settings in the main menu of the web interface.

In the submenu that has dropped out in the left column of parameters, click on the line Reboot.

The final action is to confirm the reboot of the device. Now your router is securely protected.

In closing, let me give you a little advice. Be sure to set a password on your router, personal space should be under a secure lock. This simple rule will save you from many troubles.

The router is special device, which combines single network many devices equipped with WiFi modules. It can be used to connect to local network and access to the Internet from anywhere in the office or at home, without burdening ordinary users lots of wires. But a WiFi network is much less secure than a traditional one. wired connection. That is why it is imperative to know how to change the password on a WiFi router.

Necessary measures

Since the radio signal from a Wi-Fi router is capable of spreading over tens of meters, it is necessary to set a password for it. The signal penetrates through concrete floors, so anyone can easily connect to your router from another floor or even from the street. That is, wherever there is a wireless network signal, there is access to WiFi. However, it is quite simple to limit it. To do this, it is enough to set a password on the router. When connecting in the future, you only need to enter the security key.

So, if you are wondering how to change your WiFi password, it is worth saying that it is quite simple to do this. However, this task should be approached responsibly.

Which password to use

Before moving on to solving the question of how to change the password on a WiFi router, it is necessary to discuss the points related to what this password should be. From a security point of view, it is best if it consists of eight characters or more and contains signs, numbers, and letters of different case. You should not resort to using names, dates, simple sequences of numbers. It is important to choose a security key that is difficult for an attacker to guess.

If you yourself find it difficult to come up with a complex password, then you can use special generator programs. If you take a responsible approach to the question of how to change the password on a WiFi router, then you should write down the received or invented sequence in a notebook, and not on a piece of paper that may be lost. Now you can go directly to the settings.

First steps

You can log in with a web browser by entering 192.168.0.1 or 192.168.1.1. On the reverse side each device has a special sticker that contains the desired web address. There is usually information about the login with a password. If there is no sticker, then all this data can be found in the instructions for the router.

If you have already changed the login information and forgot it, you can resort to resetting the router to factory settings. To do this, press RESET button and hold it for 10-15 seconds. This will reset the settings to factory settings, including the Internet and local network.

Now you can consider how to change the password on a WiFI router in the case of the most famous models.

D-Link router

Here you can talk about a number of models for which you will need to perform certain manipulations. If we talk about how to change the password of a Wi-Fi router, then here you should start by entering 192.168.0.1 in the address bar of any browser, and then press Enter. You will be able to see the interface login window, where you must enter the username and password, which are initially the same - “admin”. If the data has been changed, then you must enter your choice. The version of the firmware used in the router depends on which one will be in front of you. appearance window. You need to go to the WiFi menu, in which you should find the security settings.

If we are talking about how to change the WiFi network password, then it is worth saying that in the "Network Authentication" line you will need to select WPA2-PSK. The password that you have chosen, you must enter in front of the "PSK Encryption Key" item. Next, check the AES item in the settings WPA encryption. After all these manipulations, you can click "Change".

How to change the WiFi password of a TP-Link router

The range of these routers is quite extensive, but you will need several simple actions to change their password. In the browser, enter the address in the following form: 192.168.1.1, and then in the window that opens, enter the login and password in the form of "admin" and "admin". If they have been changed, then you should insert the necessary data. Depending on the specific model router, you will need to go to the menu dedicated to wireless communication. Next, you need to select the item called "Wireless Security". You should check the section called WPA/WPA2 - Personal (Recommended). The password for WiFi is indicated in a special field - PSK Password. After clicking on the save button, the settings will remain as they are. Next, you will see a message prompting you to restart the modem, you should agree.

How to change WiFi password. ASUS

As in the case of using a router of any other brand, here you should enter a certain sequence in the address bar of your browser. AT this case- 192.168.1.1. Next, you will be required to login and password. There are standard data that are similar to other options. Now you will need to perform a sequence of simple manipulations so that the password is changed.

First of all, you should go to the "General" tab, which can be found at the top horizontally. On the menu " Additional settings” you need to find “Wireless Network”. The authentication method should be WPA2-Personal. In the item "Preliminary WPA key» you can enter the password you have chosen. After that, all settings should be saved.

Changing the password on a ZyXEL WiFi router

To set a password in this case, you first need to log in. This is done by entering the following address in the browser address bar: 192.168.1.1. After that, press Enter. At the next step, you need to enter your login and password, which should be specified in the instructions for the general case. If you have previously changed these data, but cannot remember, then you should click Reset, whereby everything will be returned to the original settings.

After you enter the settings, you should find the Wireless LAN tab in the Network menu. By selecting the WPA-PSK item in the Security Mode line, you can set a password for your wireless network in the Pre-Shared Key.

Change password on HUAWEI WiFi router

To set a password for a wireless network using a HUAWEI router, you need to open your favorite browser, then enter 192.168.1.1 in its address bar, and then you will need to specify the username and password to enter, which are usually standard (admin and admin). In the Basic tab, you need to go to the Wireless Lan item, where in the special SSID field you need to specify the name of your wireless network. After selecting the type of authentication and encryption, you must enter the password for the wireless network, which usually consists of 8 characters or more. Changes must be saved, for which there is a corresponding button at the bottom of the page.

If we talk about how to change the password for WiFi Rostelecom, then it is worth noting that here we are talking about a set of similar manipulations. It is quite possible that the appearance of the interface will differ from those described earlier, but the names of the main points should be the same.

This completes the material. Now you know on WiFi. After all this, to connect a phone or other device to your wireless network, you must use the character set that you previously specified in the settings of your router. If you need to change your password again, you will already know how to do it.

You can change the password on the TP-Link router only through a special web interface. Let's figure out how to enter it, change the password for authorization in the settings and connect to the access point. Also check how to reload wireless router and reset to factory settings in case the password is forgotten.

Login to the web interface

To change any password, you need to enter a special web interface to manage the router. As a rule, the input to it is standard for all devices.

As a result, an interface for configuring the router will open. The login instructions are identical for all routers. You can log in not only from a PC, but also from any mobile device.

Changing the password for logging into the web interface

After connecting the device and providing Internet access, it is worth changing the login password. This is necessary because all devices have the same address to activate the configuration mode and an outsider, having gained access to the connection, can freely open the settings and make arbitrary changes.

Changing the password of the WiFi network

If the user notices a decrease in Internet speed when using WiFi or notices that when there is no connection, the router flashes all the indicators, then it's time to change the password from the wireless network.

After changing the password, you need to restart the router and reconnect the devices to the network. Often, for a new connection, you need to forget the current date and connect using a new one with the password set.

Most settings require a reboot after changing settings. To restart, go to the left side of the window in the System Tools menu and select the Reboot command. It will be the most correct option when changing settings.

Purely technically, you can organize a restart by briefly turning off the power to the device. But it should be used only in emergency cases.

Reset all settings to factory settings

If something went wrong during the settings of the router and you can’t connect to the Internet or the user forgot the password for authorization in the settings menu, then full reset devices.

If you have access to the settings web interface, then in the right panel you need to open System section Tools and select the Factory Defaults option.

Today, a router is available in almost every apartment or office. The device provides Internet access to several users at once, without requiring additional wires or cables. It can be connected to a PC, laptop, smartphone, game console etc. As a result, a local network is obtained, in which any information is continuously exchanged. Therefore, it is extremely important to monitor its safety. To consider the issue of protecting a Wi-Fi network, consider the question of how to change the password on a tp link router. For devices from other manufacturers, changing the password will be very similar.

To do this, you need to take two simple steps:

First, set or change the password for the WiFi network. By doing so, you will not let neighbors or lovers free internet waste your traffic. Even if you have unlimited tariff and your wallet does not reflect the number of connected to your insecure network users, then extra device will always reduce the data transfer rate, loading the router.

Secondly, password-protect the web interface of the router itself. Otherwise, anyone with access to the local network can change the router settings or even set their own password.

Thus, it is necessary to protect the entrance to administrative settings router and the wireless network itself.

Change WiFi password on TP-Link router

Open any browser. Then in the address bar, enter 192.168.1.1 or 192.168.0.1 and press Enter. Both IP addresses are valid for most TP-Link routers, including TL-WR740N, TL-WR841N, TD-W8951ND and more popular models this manufacturer. If the browser refuses to respond to the IP address you enter, then try restarting both the PC itself and the router.
A small dialog box will open, where there will be two columns - "Username" and "password". For most routers, the default login and password is admin. We enter this word twice - in each column and press the "Login" button. If the login is denied, then see the user manual for the router. Often there are standard login and password. It is extremely rare when the password is "1234" or an empty string.
Now we fall into big menu with all router settings. If the interface is Russified, then there will be no problems: Wireless/Wireless Security.
If it is in English, then first we need the Password tab. On many models (WR740N, WR841N) you need to look for the Wireless section. Then select the Wireless Security subsection. Here, just click on the item WPA / WPA2 - Enterprise or WPA-Personal / WPA2-Personal. The latter option is considered more secure, but the choice is yours.
The third or fifth line (depending on the type of protection chosen) will be the PSK Password column. Now we need to come up with good password(more than 8 characters), of course, without any "12345" or "qwerty". It is desirable that there are numbers, and letters, and special characters.
Now click the Save button. Left . Most often, he himself suggests that you do this using a special window on which we click "OK".

Do not forget that after changing the password, it is necessary on all devices that were connected to the router to delete connections and re-establish them with each wireless connection by entering a new password. Otherwise, errors and malfunctions of the entire Wi-Fi are possible.

Change the password to access the router settings

So, we have protected access to the wireless network itself. However, the main thing remains - to put strong password for router settings. If you do not do this, then any advanced user will be able to connect to your router, and then by entering “admin” twice in the Name and login line, he will be able to change the WiFi network password or manage all the settings of the access point.

Therefore, for the sake of your peace of mind and uninterrupted operation of the network, we must change default password to the router interface. Moreover, the algorithm of actions is more than simple:

First of all, using a browser, IP addresses 192.168.1.1 or 192.168.0.1 and the "magic" word admin We get into the settings menu of the router.

If it is in Russian, then choose System Tools/Password. If in front of you English version, then System Tools/Password.

A window with five lines opens. The first two are the old username and password. Enter admin (or another combination that allowed you to enter the menu) in each line in turn. The next three are the new username, the new password, and its confirmation. Should I change my login? - Of course yes. And it is better to indicate not your last name, but something more complicated. The password for accessing the router settings must be different from what you have on the WiFi network itself. Otherwise, all protection will become meaningless.

Click "Save". The settings will be automatically exited and the login window will appear. It remains to check if you did everything right. Enter new credentials here. Now you can be sure that you have done everything possible to protect the wireless network and the router itself.