Create a system restore point 7. Previous versions of files
Before you create a Windows 7 restore point, you should understand what it is and what it is for. In short, this is saving the computer's state settings in automatic or manual mode In other words, backup, backup, etc. This function exclusively affects the operating system files that are needed for its correct operation and does not knock down, does not delete custom settings programs or personal files. As a rule, creating backup points in automatic mode happen:
- Once a month or week (depending on the settings, which can be changed at any time).
- Every time after you start installing a third-party software or drivers.
Restoration may be necessary when it becomes necessary to roll back system parameters to the time when it was working properly. The reasons for this may be different:
- Accidental deletion system files.
- Infecting your computer with a virus that caused untold harm.
- Unsuccessful installation of any software or game;
- Another failure or important settings change.
- There were noticeable malfunctions in the operation of the device.
In any case, one of the reasons described above is usually accompanied by the occurrence of critical errors, after which the system stops working normally and freezes occur.
We save system settings for future recovery
To make a backup Windows settings, you need to open “start” and press right click mouse on the line “computer”.
Then select “system properties” from the top. A dialog box will appear showing the basic properties of the computer. On the left you can see a list, clicking on which will open a particular window. Select “System Protection”. A small dialog box will appear.
At the bottom, in the “system protection” tab, you will see two items for working with Windows backups:
- Setup.
- Create.
Since we need to create a backup point, we select the second item. After this, the computer will ask you to come up with a name for it. We strongly recommend using a concise and understandable name (and not a set of letters and symbols, as is often the case), which will help you if you have to use the rollback option. After you enter the name, the computer will begin to remember the current state of Windows.
How to get to the backup menu
Having a backup like this Windows settings, you have the opportunity to return normal work devices at any time. In order to do this, you need to go to the “system recovery” menu. There are several ways to do this. The simplest one is to open the “start” menu, click on the “all programs” line, scroll through the list to “standard”, open the next “system” folder and select “system recovery”.
How to rollback
In order to return the computer settings to the time the rollback point was created, you must:
The device will begin to rollback and reboot. Keep in mind that when recovery begins, all windows will automatically close, so save all files in advance so as not to lose important information.
How to delete backup points
As you already understood, the creation of rollback points occurs by copying the current state of the computer settings to perform a rollback. There is no magic here, and the “magic points” for rolling back the computer take up a certain space on the hard drive. If you do them too often, a problem of lack of free space may arise. disk space. To avoid wasting free space, it is recommended to delete old points, giving preference to recently created ones.
If you don't use special utilities to clean your computer, Windows allows you to do this in two ways:
- Delete everything up to the last restore point (in this case, you must be sure that you have this moment the state of the computer is in an acceptable state and after removing the remaining points, make a new one).
- Leave only latest copy and delete the rest.
Delete each restore point
Go back to the menu where you already created backup points. For this.
In case of any failure, you can always roll back (go back) by restoring the operation of your computer or laptop. The main thing is that there are these control points. Otherwise, you will not be able to restore the system. Therefore, so that you do not encounter this unpleasant situation one day, it is better to figure out in advance how to create a restore point in Windows 7.
It's understandable: inexperienced users They don’t even know about it, but a computer failure can happen at any time. And, having found out on the Internet how to restore the functionality of a PC (or laptop), they will be very glad that they have these same control points.
In Windows 7 this is done automatically. As a rule, they are created every week, and also in cases where Windows sees that some changes are being made (most often this is the installation of drivers, games, etc.). It is logical - after all, it is precisely because of these applications that PC malfunctions usually occur.
The only point: you need to check that you have this function activated. And if it is turned off, then enable recovery Windows systems. To then calmly roll back to working version and keep all your files safe and sound.
By the way, restoring Windows from a checkpoint does not guarantee that you will be able to recover deleted files. If you accidentally deleted important documents or photos, it is better not to use this method. IN in this case it is recommended to use special programs to recover files.
And if you have Windows 7 installed, you can read -?
So, to check if you are creating control points, do the following:
If all the items say “Disabled,” then this needs to be corrected.
How to enable System Restore
Just a couple of clicks and 2-3 minutes of time - no more. So, to enable System Restore in Windows 7, follow these simple instructions:
Keep in mind that when all the memory is occupied, the previous ones will be deleted.
Congratulations, now you know how to enable System Restore in Windows 7. This knowledge will definitely come in handy.
But that is not all. The fact is that Windows allows the user to make a manual restore point. Any time. This is extremely useful option, so let’s look at it in more detail.
Fix the point manually
Why is this necessary? Let me give you a simple example: you have , and you want to put new driver on sound card. However, you are not sure that it will install correctly. And all because there was already a case when, after installing the driver on the video card, I had to remove it (by executing) so that the computer would work normally again. To avoid this, just add a system restore checkpoint. And then just boot from it if the need arises.
That's it - now you can safely install any games and drivers.
And finally, let's look at one more situation when you need to disable Windows System Restore.
How to disable System Restore
If for certain reasons you want to disable system recovery (for example, there is too little space on the local drive C), then do the following:
By the way, if the whole point is only a lack free space on local drive C, then in the same window you can click the “Delete” button.
As a result, all checkpoints will be deleted, and you will have more free space for a while. But in the future, Windows will continue to automatically create them, and in case of problems with your PC, you will be able to boot from them.
Many users of computers based on the Windows operating system know that this OS allows you to create restore points. They allow you to restore full time job systems in cases where it is infected with a virus, does not start or the OS is working with errors. To help PC users who are not familiar with this procedure, we have prepared material where we describe this process in detail for Windows 7.
The principle of the recovery procedure in seven
The basic principle of the procedure for creating a restore point is automatic saving system settings when it changes. For example, in order for a Windows 7 restore point to be automatically created in the OS, changes must occur in the registry. That is, when you install any driver or software, the OS records it and creates a restore point. Based on the above, it becomes clear how many restore points Windows 7 can save on your hard drive. Therefore, in order for a PC user to return the computer to its previous state, all they need to do is use one of them and start the procedure itself.
How to restore a computer on seven
In this section we will describe the OS recovery procedure faulty P K using one of the points. For example, we will take a faulty PC with an operating system Windows 7 Ultimate. This computer can still boot the OS, but it is unstable, producing screens of death, freezes, and many other system errors. Most likely, this behavior of the OS is caused by a virus or the absence of some system files.
Now let's try to select a restore point on this PC when it was still functioning stably. To do this, go to the system properties and open the “” tab. Now let's press the button Recovery….
After clicking, a wizard window should appear. The wizard window shows that we can start fixing the OS using the recommended point, as well as by selecting the points created earlier.
In our case, we will select the last point when it worked stably and is recommended.
Having selected it, the wizard will ask you to confirm the recovery procedure using it.
As soon as you confirm, the wizard will immediately rollback to the previous OS state.
Reverting to previous settings may take five minutes or much longer. The rollback time depends not only on the amount of returned data stored on the PC, but also on computing power the computer itself. After a successful rollback, you will see the following message.
Manually created Windows restore point
In addition to automatically creating control points, the user has the opportunity to create them himself. For example, before installing a beta version of software that is not yet well supported by the OS, you may want to create it manually.
To create a point manually, we will go to the system properties to the same “” tab. On this tab we will select the most bottom button with the name Create... . After this action, a window will appear in which you need to set a name. It is best to create a name associated with specific changes in the seven. For example, if you installed some driver package, then the restore point can be called “ Installation of drivers from 06/10/2016».
Having specified a name, click the Create button. After successful creation you will see a message like this.
You can find the newly created control point in the wizard that we looked at earlier.
In the wizard window, you can only select and view the properties of a point to roll back to the previous state of the system, but you cannot delete it using this wizard.
Deleting checkpoints can free up hard drive space, but you should also be aware that they are permanently deleted.
It will help us to delete a specific control point free utility CCleaner. You can download the CCleaner utility from its official website. To use the uninstall options, you need to launch the program and go to the “ Service/System Restore».
In the window CCleaner utilities you can view and delete all previously created recovery points, except the last one. This is done specifically so that the user can use the last point in the OS if it crashes.
Reviving an OS that has stopped loading
Let's look at an example of restoring an OS when it stopped loading completely. In this case, the culprits, as in the example above, may be malware , unlicensed software And remote files operating system.
For this example we will need a license Windows disk 7. To return the OS to operation, we will boot from this disk when the computer starts. In the second window of the downloader there is a link "". To start rolling back to the previous state, we need to click on it.
After this action, the bootloader will scan the hard drive for the presence of previous operating systems and allow you to select one of them to roll back. In our case, this is the only Windows 7 operating system.
Having selected the required operating system, we move on to the next window.
In the second window of the wizard, a list of all checkpoints will open, with which you can roll back to the previous state.
Further actions are identical to the first example, so there is no point in describing them. The example described above is used by thousands of users, as it allows you to return the OS to its normal state.
Let's sum it up
After reading this material, any PC user who was unfamiliar with checkpoints will be able to restore the system to a working state. In addition, I would like to give our readers some advice.
To ensure your OS functions properly, use good antivirus programs and do not install pirated software.
For example, if you support the system in in good condition, then the creation of control points can be completely disabled. Many experienced PC users do this, as it can slightly improve the performance of the computer. However, if your computer resources allow, the described technology will greatly simplify your life if something goes wrong with your OS. Therefore, the choice is yours.
Video on the topic
The correct functioning of the Windows 7 OS depends on the contents of the registry files and information in it. If they are removed or damaged, the computer will malfunction. You should also expect problems such as incorrect work necessary programs or the inability to download them, slow work PC. This problem can be resolved by returning the system to its previous state. The system recovery procedure requires the use of so-called restore points. This is a snapshot of the most important computer files for the functioning of the system.
Restoring the operating system to a previous state allows you to return your computer to the state when it was functioning normally. Violations can be caused by the deletion of individual system files that are necessary for the operation of a particular program or for solving specific problems. The reasons for this may be:
Provided that the computer is used to work with accounting or play games computer games, full procedure reinstalling the OS is unacceptable. The situation can be further complicated by the fact that a specific PC is the only source of data and any backups are missing. Then there will be restoration optimal solution, besides, you can do it yourself.
At its core, the procedure is protective because it allows you to save important information. There are several types of returning the OS to its normal operating mode:
- in automatic mode (“System protection”);
- by downloading the latest favorable settings;
- preliminary manual backup.
Typically, the Windows operating system creates restore points on a weekly basis. This is also done at the time of installing or updating the OS. The seventh version provides the “System Protection” function, which works by default. However, its use is regulated by settings and is only necessary for local system drives. For the rest, the user makes the settings independently.
Note! To restore the operation of the operating system, a special one is created, which is the engine of the return procedure.
It acts as a carrier of registry settings and other information used by Windows 7. The functioning of the point is similar to the game checkpoint; if the OS fails, it provokes a restart of the PC.
Video - How to create a Windows 7 restore point
Automatic recovery point creation mode
operating room Windows system 7 automatically saves working condition. In most cases this happens before installation. critical updates, large-scale changes in the registry, driver updates, complex software update or other operations that significantly affect the functioning of the OS.
There are two automatic type methods:
- full automatic – created without user notification;
- semi-automatic - the user independently enters the name of the point each time the system starts.
Such computer activity allows you to use ready-made recovery points at any time, which have already been stored in memory for some period of time. But if the OS is damaged and there are no relatively recent saves, difficulties may arise, since old saves require restoring the entire system and reinstalling all programs. It takes too much time and is not worth the effort. If the default is to disable OS updates, which is done by users for a specific purpose, you will need to use the manual configuration option.
Manual mode for creating restore points: method 1
Users are given the opportunity to create their own recovery points, for which standard Windows tools. To perform such an operation, you need to follow a few simple steps:
- Go to the Start menu on your computer and select Control Panel.
- Select “System” from the listed icons.
- After the transition, information about operating system computer. On the left side of the panel, select “System Protection”.
- We are interested in the “Settings” category, where you need to select the disk that requires recovery. Next we move on to the settings.
- Select the required recovery options option. If necessary, you can turn them off completely. Click “Apply” to save your changes.
- Once the parameters are configured, you can start creating a point. To do this, in the “System Protection” window, you need to click on the button located at the bottom right.
- A window will pop up in front of the user, allowing him to create a restore point himself. You must enter a name for identification purposes.
- When the name is entered, click on the “Create” button. Next, the user will need to wait some time, which is necessary to create a new point.
Manual creation, method 2
The procedure is also performed using a different method. Suitable for those users who have not disabled automatic creation of restore points. There are even fewer steps involved here.
Note! If there were no previously created restore points, the procedure will not be completed.
The computer will act on those points that were created automatically. It is also possible to select the point that suits the user. Typically this is the latest saved version.
If you make a Windows 7 restore point, you can resume the system if some kind of failure suddenly occurs. In general, these rollback points are created automatically at certain intervals. However, sometimes you need to create them yourself, manually, without waiting for the system to do it. This may be required if you are going to do something incomprehensible, something that could lead to a system failure.
Now I will tell you how to make a Windows 7 restore point, and do it every time you are going to do something on your computer that you doubt. Everything will take you a couple of minutes, and this is significantly less time than you will spend if you hopelessly damage the system.
Creating a restore point
So, before creating a Windows 7 restore point, you need to open System Properties. To do this, right-click on “Computer” and click on “Properties”. Then click the link “ Extra options systems." And then “System protection”.
Windows 7 restore checkpoints
To start creating a Windows 7 restore point, click “Create”. You will then need to enter a description for the rollback point. The date and time are added automatically. The description should be such that you later understand that this is your system backup.
Click “Create” again and the process will begin, which will end in a few minutes with a success message. After this, you can do whatever you want with the system files.
Creating a Windows 7 restore point
You can create a Windows 7 restore point at any time and in any quantity. And there is no need to be afraid that HDD will overflow with them. A certain space on the disk is allocated for backup (more on this below), when it is full, older recovery points will be deleted, and new ones will remain.
Before making a Windows 7 restore point, it is recommended to save all changes to open programs and close them.
How to configure restore points
Before you make a Windows 7 restore point, you can determine for yourself how much space the system can allocate for them. If you devote a lot of space to this task, then older backups will be stored longer. If you give away a little space, you will save hard drive space.
You can find out this in the same “System Protection” window. Automatic creation Windows 7 restore point usually occurs for boot disk, on which the OS hangs. Therefore, we highlight the boot one in the table local disk and click “Configure”.
The following window will open, in which, in the “Disk space usage” section, you can use the slider to adjust the volume for backups.
In addition, in the "Recovery Options" section, you can define options for rolling back the system: it is recommended to select "Restore system settings from a previous version of files." If you check “Disable system protection”, backups will not be made automatically. But I would not recommend it - you will save several hundred megabytes on the disk, but you will lose the ability to restore the system at any time.
Setting up Windows 7 recovery
Now you understand how to make a Windows 7 restore point, and you can do it every time you doubt your actions during system setup. This will also help save the system when installing unfamiliar programs or drivers. All that remains is to find out how to recover from them.
How to restore Windows 7
And so, if you messed up your computer and something went wrong, then you need to recover from pre-created points. Before you start Windows 7 system recovery, you need to again go to the “System Properties” window and the “System Protection” tab. Here we click the “Restore” button, click “Next”, and we see a window in which you need to select a point for a rollback.
Windows Recovery 7 from point
