How many signals are there at a traffic light for vehicles? Traffic lights according to traffic rules

All tips

Today it is very difficult to imagine traffic rules without the main tool for regulating traffic, which is a traffic light. It is designed to regulate and facilitate both vehicular and pedestrian traffic. There are different traffic lights depending on their functions. Although they are similar to each other, they have certain nuances that need to be remembered.

Traffic light: definition

A traffic light is an optical signaling device that is designed to regulate the movement of cars, bicycles and other vehicles, as well as pedestrians. It is used in all world countries without exception.

Interesting! Previously, there were no green lights in traffic lights in Japan. It was replaced by blue. But scientists have proven that green is more acceptable to human eyes.

Types of traffic lights

The most common are three-color traffic lights with round signals: red, yellow and green. Traffic regulations in some countries require the use of orange traffic lights instead of yellow ones. Signals can be located both vertically and horizontally. If other special traffic lights or additional sections are not provided, then they regulate the movement of all types of transport, as well as pedestrians. Next, we will look at the different types of traffic lights, from everyday ones to special ones.

Classic three-section traffic light

Such a traffic light, as a rule, has three colors, arranged in order: red, yellow, green - from top to bottom or from left to right. Such traffic lights are installed at intersections. They are designed to allow simultaneous passage of all types of transport in all directions permitted by traffic regulations. They are also installed at controlled pedestrian crossings located between intersections. It is also possible to install such a traffic light at a railway crossing in populated areas, at the intersection of a road with tram tracks, in front of a bicycle path and a roadway. They can also be seen where the roadway is narrowed to allow oncoming traffic to pass alternately.

Interesting fact!The first three-section traffic light was installed in Detroit in 1920.

Two-piece

Traffic lights with two sections are used to regulate the flow of traffic in the territories of industrial enterprises and organizations, as well as during the narrowing of the roadway to organize a single-lane reverse traffic flow.

Single-section traffic light with yellow light

This one-color traffic light is found at unregulated intersections and pedestrian crossings.

Traffic lights with additional section

Traffic lights can also be equipped with additional sectional sections with arrows or arrow outlines. They regulate the movement of traffic in one direction or another. According to traffic regulations, such traffic lights operate as follows: the contours of the arrows on all signals of a conventional three-color traffic light mean that its action extends only in one indicated direction.

An additional section of a traffic light with a green arrow on a black background according to traffic rules allows passage, but does not provide advantages during passing. Sometimes you can find an always-on green signal, which is made in the form of a sign with a solid green arrow. This means, according to traffic rules, that turning is allowed, despite the prohibitory traffic lights.

Such traffic lights are installed in places where it is necessary to organize conflict-free traffic at intersections. If one of these traffic lights turns green, then when crossing the intersection, you don’t have to give way. To avoid emergency situations, personal traffic lights are placed above each lane, which show the direction of movement that is allowed from a particular lane.

Reversible traffic lights

To regulate traffic along the roadway lanes, reversible traffic lights are used. These are special band control regulators. Such traffic lights can have from two to three signals: A red signal in the form of the letter “X” prohibits movement in a specific lane. A green arrow pointing down, on the contrary, allows movement. A yellow diagonal arrow signals that the lane mode has changed and shows in which direction you need to leave it.

Traffic lights for regulating traffic through a pedestrian crossing

Typically, such traffic lights have only two types of signals: the first one allows, the second one prohibits. As a rule, they correspond to green and red colors. The signals themselves can be of different shapes. They are often depicted as a stylized silhouette of a person: standing in red and walking in green. For example, in America, the prohibition signal is made in the form of a red raised palm, meaning “stop”. Sometimes the following inscriptions are used: red “stop” and green “walk”. In other countries, respectively, in other languages.

On highways with heavy traffic, traffic lights with automatic switching are installed. But there are cases when you can switch the traffic light by pressing a special button, which allows you to cross the road within a certain time. Modern traffic lights are equipped with a digital countdown display for convenience. For blind people, sound devices are installed in traffic lights.

To regulate the movement of trams

A traffic light for a tram is usually placed in front of areas with limited visibility, long ascents and descents, at a tram depot and in front of switches. There are two types of traffic lights for trams: green and red. They are installed either to the right of the tracks or hung centrally above the contact wire. Basically, such traffic lights notify tram drivers whether the path further is busy or not. They do not regulate the movement of other vehicles and are purely individual. Their work is built automatically.

Traffic lights: driving rules

The circular light signals mean the following: a static green signal allows the movement of vehicles or pedestrians, and a flashing green traffic light means that a prohibitory signal will soon come on, but for now movement is allowed.

Interesting fact!Residents of large cities generally spend about six months of their lives waiting for a traffic light.

What does a yellow traffic light mean? It warns that the prohibiting signal will be replaced by a permissive one or vice versa, and for the duration of its action it prohibits movement. A flashing yellow traffic light means that the section of the road on which the traffic light is located is not regulated. If it is located at an intersection and operates in this mode, then the intersection is unregulated. Drivers are guided by those articles of the traffic rules that stipulate the passage of unregulated intersections. A static and flashing red signal prohibits movement in any direction.

The red and yellow traffic lights that are on at the same time indicate that it is prohibited to move further, and the green light will soon turn on. The white-lunar traffic light signal informs that the alarm system is working and you can continue driving. Such traffic lights are installed on tram and railway tracks.

Traffic lights that look like arrows mean the following: red, yellow and green arrows mean the same thing as round signals, only they act in a certain direction. An arrow pointing to the left also allows a U-turn, unless the corresponding next priority traffic sign prohibits it.

The green arrow of the additional section has a similar meaning. If this signal is turned off or the red outline is on, it means that movement in this direction is prohibited. If the main green signal has a black outline arrow, then this means that there are other directions of movement than those indicated by the additional section.

What is more important: a sign, a traffic light or a marking?

Traffic rules imply the following priority: the main one is the traffic controller, then the traffic light, then the sign and then the markings. Traffic controller signals take precedence over traffic light signals and road sign requirements. They are mandatory. All traffic lights, except flashing yellow, are more significant than road signs. All road users are required to follow the instructions of the traffic controller, even if they contradict traffic lights, signs and markings.

In the capital of Germany there is a traffic light with thirteen signals. It is not so easy to understand his testimony right away.

At first glance, traffic light signals are all very simple and we have all known them since childhood. Red - stop, yellow - get ready, green - go. This is a very simple rule. In this article we will look at this rule deeper within the framework.

Let's find all the pitfalls hidden in traffic lights. The most interesting signals will be those that are located in the additional section of the traffic light and what signals there may be in this section. We will look at Chapter 6 of the Traffic Rules regarding the regulation of traffic through an intersection using traffic lights.

6.1. Traffic lights use green, yellow, red and white-lunar light signals.

Depending on the purpose, traffic light signals can be round, in the form of an arrow(s), a silhouette of a pedestrian or a bicycle, or X-shaped.

Traffic lights with round signals may have one or two additional sections with signals in the form of a green arrow(s), which are located at the level of the green round signal.

We will not consider white-lunar traffic lights, in the form of a silhouette of a pedestrian or a bicycle, and X-shaped ones in this article.

6.2. Round traffic lights have the following meanings:

A green signal allows movement;

A green flashing signal allows movement and informs that its time is expiring and a prohibitory signal will soon be turned on (digital displays can be used to inform drivers about the time in seconds remaining until the end of the green signal);

The yellow signal prohibits movement, except in cases provided for in paragraph 6.14 of the Rules, and warns of an upcoming change of signals;

A yellow flashing signal allows movement and informs about the presence of an uncontrolled intersection or pedestrian crossing, and warns of danger;

A red signal, including a flashing one, prohibits movement.

The combination of red and yellow signals prohibits movement and informs about the upcoming activation of the green signal.

This paragraph of the traffic rules describes round traffic lights. The most common traffic light, which is most often found on the roads.

6.3. Traffic light signals, made in the form of red, yellow and green arrows, have the same meaning as round signals of the corresponding color, but their effect extends only to the direction(s) indicated by the arrows. In this case, the arrow allowing a left turn also allows a U-turn, unless this is prohibited by the corresponding road sign.

The green arrow in the additional section has the same meaning. A switched off signal of an additional section means that movement in the direction regulated by this section is prohibited.

The first thing you should pay attention to is that the signals are made in the form of arrows, i.e. the arrow is a signal. The signal is not round. Traffic light signals with a contour arrow do not fit this definition, and clause 6.3 of the traffic rules is not applicable to them.

The second important point is that traffic lights made in the form of arrows regulate only indicated directions. For example, if the red arrow to the right is on, then movement is prohibited only to the right; moving straight, turning left and turning around are not regulated by this signal.

The same applies to the green arrow signal, but only if the arrow is in the main section of the traffic light. Determining, for example, in the dark, whether this is the main section of a traffic light or an additional one is very simple - if the section is additional, then some signal in the main section of the traffic light must be on; if there are no other signals besides the arrow, then this means that the arrow is in the main sections.

6.4. If a black contour arrow(s) is applied to the main green traffic light signal, it informs drivers about the presence of an additional section of the traffic light and indicates other permitted directions of movement than the additional section signal.

This paragraph describes the purpose of the contour arrow of a traffic light signal. We see that a contour arrow can only be placed in the main section, and only on a green traffic light signal, and unlike a signal in the form of an arrow, a contour arrow allows movement only in the indicated directions. Traffic in other directions is prohibited.

We could finish our material here, if not for one very common situation in practice. We often come across a traffic light with the following signal:

In front of us is a traffic light with an additional section and a round signal. It would seem that according to paragraph 6.3, moving in the direction regulated by this section is prohibited.

But let's figure it out:

According to clause 6.2, a round green signal allows movement in all directions, clause 6.3 regulates traffic light signals made in the form of arrows, in this case clause 6.3 is not applicable.
The additional section may not be visible at night, and traffic signals may not have different meanings depending on the time of day.
The direction regulated by the additional section is unknown to us, we only know that it is “different” from the signal in the main section, and in the main section we have a green signal that allows movement in all directions,
The additional section may not contain a traffic light signal at all, but can be used, for example, for a timer.

Thus, with a given traffic light signal, according to clause 6.2, movement is allowed in all directions, unless otherwise prohibited by signs or markings.

Response from the Ministry of Internal Affairs

Let's summarize:

The round traffic light signal extends to all directions,
The traffic light signal, made in the form of an arrow in the main section, applies only to the indicated direction and does not regulate traffic in other directions,
The traffic light signal, made in the form of an arrow in the additional section, applies only to the indicated direction and prohibits movement in other directions,
A round traffic light signal with a contour arrow on it applies only to the indicated direction and prohibits movement in other directions.

And this is how the TV show “Main Road” on NTV sees the situation.

Dear you without obstacles!

Traffic lights are optical devices that provide a light signal that regulates the movement of automobile, rail, water and other vehicles, including pedestrians.

Dear readers! The article talks about typical ways to resolve legal issues, but each case is individual. If you want to know how solve exactly your problem- contact a consultant:

APPLICATIONS AND CALLS ARE ACCEPTED 24/7 and 7 days a week.

It's fast and FOR FREE!

Traffic lights are regulated. How does a traffic light work at a railway crossing, and how does it light up?

What is the name of

A traffic light at a railway crossing is indicated by a traffic light or crossing signal.

At what crossings are they installed?

Light signaling devices at crossings are installed in accordance with the Basic Requirements for Crossing Equipment.

Installation of alarm devices occurs at crossings that involve bus traffic, as well as those located on the main route with a predominance of heavy traffic of trains and road transport, high speeds of railway transport, and unsatisfactory visibility conditions.

Traffic lights are located on the highway on the right side of the traffic flow and consist of two horizontally located lights that produce an alternately flashing signal.

If poor visibility conditions and heavy traffic prevail on the section of the road where the crossing is located, then duplicating traffic lights on the opposite side of the roadway is allowed.

At some crossings, it is allowed to install a traffic light with two red lights, which, if passage is prohibited, emit alternating flashing, and one white-moon light, emit a flashing signal.

Such a device is installed mainly at unregulated crossings where there is no responsible railway employee - the duty officer.

The additional installation of a white-moon lantern is approved by the Ministry of Railways.

Traffic lights operating in automatic mode have an adjustment that allows you to start sending a signal to prohibit the movement of motor vehicles for the period necessary for drivers to clear the crossing.

When the train enters the approaching part of the railway track, the traffic light emits an audible train signal and begins to alternately flash red lights.

Once the crossing is completely cleared of railway traffic, the signaling devices are switched off.

In order to open the semi-automatic barrier and turn off the flashing traffic light, the crossing duty officer presses the “open” button.

Traffic light signaling at a crossing with the presence of an employee on duty on the access and other tracks where it is not possible to equip rails; the red flashing traffic light signal is turned on by pressing the corresponding button located on the panel of crossing devices.

Where not provided

The presence of light signaling is provided at almost every crossing. However, if it is unprofitable to maintain a traffic light device at a certain crossing, it may simply not exist.

The main thing is that in this case certain conditions are met: good visibility, lack of traffic intensity from the railway track and highway, etc.

Despite the fact that there is no traffic light at railway crossings at the intersection of a railway and a highway, mandatory warning signs and appropriate road markings must be present.

Stop sign at a railway crossing with a traffic light

If there is a STOP sign and a traffic light at a crossing, then priority is given to light signals.

For example, if the traffic light emits a red flashing signal, then movement across the crossing is prohibited and the driver must stop at the stop line or before the intersection of the railway and highway.

But when the traffic light does not emit any signals, the situation is much more confusing.

It seems that the traffic light allows passage, since it does not emit prohibiting signals, which means you can drive through the crossing without stopping, and besides, the traffic light has an advantage over all passive signs.

However, the STOP sign means that driving without stopping is prohibited, that is, the driver is required to stop at the stop line or before crossing the railway with the road.

There is no clear answer to this question in the Traffic Rules, therefore, analyzing situations that may be associated with thoughtless crossing of a crossing, we can conclude that it would be more advisable to stop.

After all, the traffic light at the crossing may simply be broken and not emit prohibiting signals.

Before you start moving across the crossing and, accordingly, along the railway track, you should carefully assess the situation for the approach, absence/presence of a train.

Such a stop can protect the driver from instant death under the wheels of railway transport.

In addition, traffic police officers and inspectors have the right to fine the driver for a violation - not stopping at the request of a STOP sign, that is, to interpret the ambiguity of the situation in their favor.

Signal meaning

When driving along railway crossings, the driver may face a controversial situation related to equipment and traffic lights.

If you do not know the meaning of each signal emitted by one or another type of traffic light, the driver may be subject to a violation and be held accountable to the fullest extent of the law. In some cases, such an oversight can lead to the death of innocent people.

It is worth noting that a traffic light may be located at a crossing along with a sign “moving without stopping is prohibited.”

Many drivers, seeing this sign, do not pay attention to the traffic light and stop before crossing.

However, if the traffic light does not emit prohibiting signals, then you do not need to stop at the request of such a sign. Stopping should only take place when the traffic light is in a prohibiting state.

The following traffic lights and their meanings should be remembered:

a red signal on means a ban on further movement of vehicles across the crossing;
a switched off red signal means permission to continue moving along the crossing after a careful inspection of the railway tracks for the presence of a train;
the red signal is on, the white-moon signal is off, means that vehicles are prohibited from moving across the crossing;
the red signal is off, the white-moon signal is on, it means that you can move through the crossing;
a switched off red signal or a switched off white-lunar signal means that the crossing signaling device is faulty or is in disabled mode.

Red light

There are two types of traffic lights:

three-section. When the red lights are flashing, movement through the railway crossing is prohibited. You should stop before the stop line or the appropriate sign. When the three-section traffic light is white, traffic on the crossing is permitted;
two-section. When the red lights are flashing alternately, movement across the crossing is prohibited. If the crossing does not produce any lighting, then passage is permitted.

Both of these types are intended to inform the driver about the possibility of traveling across a railway crossing.

Flashing

The flashing of one red signal or two alternately flashing signals of a semaphore installed at a railway crossing informs the driver that further movement along the crossing is prohibited (Road Rules clause 6.2).

White-lunar

The flashing of the white-moon signal located at railway crossings gives permission for the movement of motor vehicles across the crossing.

If it is turned off, regardless of the color emitted when turned on (white-lunar, red), movement is allowed, but with a preliminary inspection of the railway track for the presence of railway transport.

It turns out that you can move along the crossing:

with a flashing white-lunar traffic light located at the crossing;
when the white-lunar and red traffic lights are turned off.

If we talk about traffic lights located directly on the railway track and intended for shunting work by trains and trains, then there are two warning colors:

moon-white color allows shunting work;

White

If a white light is flashing at a crossing, this means that all technical systems of the crossing are in good condition. The blinking of the white-moon lamp does not mean permission to pass.

Other colors

There are also other light signals:

green color allows the dissolution of the composition at the set speed;
yellow color allows the dissolution of the composition at the lowest speed;
simultaneously yellow and green colors allow the dissolution of the train at a speed equal to the interval between the set and the lowest speed limit;
red color prohibits the dissolution of the composition.

A railway traffic light is designed to regulate the movement of railway and shunting trains. They are also used to regulate speed indicators during dismantling from sorting humps.

The light signals of such traffic lights mean:

red lighting says that railway transport is obliged to stop traffic;
yellow lighting allows movement using a reduced speed (from 40 to 60 kilometers per hour, depending on territorial conditions) until approaching the next traffic light, the driver must be ready to stop;
green lighting allows movement at set speeds and indicates the vacancy of two or more block sections (automatic blocking) or the entire section (semi-automatic blocking);
flashing white moon lighting together with a red light, it is considered permissive for movement, subject to precautions, the speed should not exceed 20 kilometers per hour, the driver must be prepared to stop immediately if an obstacle arises;
flashing yellow light with a burning yellow light, it allows movement at the set speed, informs about the opening of the next traffic light and about deviations at turnouts;
double yellow lighting allows movement at reduced speeds, informs about the closure of the next traffic light and about deviations at turnouts;
single flashing yellow light allows movement at the established speed limits, informs about the opening of the next traffic light and about a decrease in the speed limit.

Travel rules

Each driver, approaching a crossing, must remember all the traffic rules associated with the passage of railway tracks, including the signals emitted by traffic lights.

Traffic lights located at railway crossings consist of two red lights located in a horizontal plane. Between or below these red lanterns is a white lantern.

Every driver should know what any signal emitted by a traffic light at a railway crossing means:

If two red lights flash alternately, then you cannot move along the crossing. The alternating flashing of red lights operates in conjunction with sound alarms, if provided at the crossing.
If the white light flashes alternately, then the serviceability of the technical crossing system is normal. It turns out that the white-moon lantern is not considered decisive when prohibiting or allowing movement along a crossing.

What to do if the semaphore is broken and does not work

If the traffic light is working, then, as mentioned above, when the lights are on, all priority signs are canceled. Passive signs are considered to be markings applied to the road surface, and active signs are traffic lights.

Traffic lights are called active devices, due to the change of signals, in contrast to markings, which constantly indicate the same rule.

In the case of a working signal at a traffic light, emitted by a red light, you should be guided by the semaphore.

If the traffic light is not on, then you should pay attention to the markings, namely, stop at the “STOP” sign and make sure that there is no train on the railway track.

Penalties for driving through a prohibitory signal

Almost every railway crossing has traffic lights, and sometimes the lighting device is located together with the barrier.

Passage is permitted only if the barrier is open (if equipped) and the traffic light is not flashing red.

Movement along the crossing will also be prohibited if a person on duty is present at the crossing and he gives special signs prohibiting passage.

The punishment for driving through a railway track when there is a traffic light alternately flashing red will be a fine in the amount of 1 thousand rubles or deprivation of the right to drive a vehicle for a period of three to six months. Overtaking on the tracks is also prohibited.

This violation is considered the most serious, which poses a threat to the health and lives of citizens. In this regard, such severe punishment is provided.

6.1. Traffic lights use green, yellow, red and white-lunar light signals.

Depending on the purpose, traffic light signals can be round, in the form of an arrow(s), a silhouette of a pedestrian or a bicycle, or X-shaped.

Traffic lights with round signals may have one or two additional sections with signals in the form of a green arrow(s), which are located at the level of the green round signal.

6.2. Round traffic lights have the following meanings:

GREEN SIGNAL allows movement;
GREEN FLASHING SIGNAL allows movement and informs that its validity period is expiring and a prohibitory signal will soon be turned on (digital displays can be used to inform drivers about the time in seconds remaining until the end of the green signal);
YELLOW SIGNAL prohibits movement, except for the cases provided for in paragraph 6.14 of the Rules, and warns about the upcoming change of signals;
YELLOW FLASHING SIGNAL allows traffic and informs about the presence of an uncontrolled intersection or pedestrian crossing, warns about danger;
RED SIGNAL, including flashing, prohibits movement.

The combination of red and yellow signals prohibits movement and informs about the upcoming activation of the green signal.

6.3. Traffic light signals, made in the form of red, yellow and green arrows, have the same meaning as round signals of the corresponding color, but their effect extends only to the direction(s) indicated by the arrows. In this case, the arrow allowing a left turn also allows a U-turn, unless this is prohibited by the corresponding road sign.

The green arrow in the additional section has the same meaning. A switched off signal of an additional section or a switched on red light signal of its outline means that movement in the direction regulated by this section is prohibited.

6.4. If a black contour arrow(s) is applied to the main green traffic light signal, it informs drivers about the presence of an additional section of the traffic light and indicates other permitted directions of movement than the additional section signal.

6.5. If a traffic light signal is made in the form of a silhouette of a pedestrian and (or) a bicycle, then its effect applies only to pedestrians (cyclists). In this case, the green signal allows, and the red signal prohibits, the movement of pedestrians (cyclists).

To regulate the movement of cyclists, a traffic light with round signals of reduced size, complemented by a white rectangular plate measuring 200 x 200 mm with a black bicycle image, can also be used.

6.6. To inform blind pedestrians about the possibility of crossing the roadway, traffic light signals can be supplemented with an audible signal.

6.7. To regulate the movement of vehicles along lanes of the roadway, in particular along those in which the direction of movement can change to the opposite, reversible traffic lights with a red X-shaped signal and a green signal in the form of an arrow pointing downwards are used. These signals respectively prohibit or allow movement in the lane above which they are located.

The main signals of a reversible traffic light can be supplemented by a yellow signal in the form of an arrow, tilted diagonally down to the right or left, the inclusion of which informs about the upcoming change of signal and the need to change lanes to which the arrow points.

When the signals of the reversing traffic light, which is located above the lane marked on both sides by markings 1.9, are turned off, entry into this lane is prohibited.

6.8. To regulate the movement of trams, as well as other route vehicles moving along the lane allocated for them, single-color traffic lights with four round white-moon colored signals located in the shape of the letter “T” can be used. Movement is permitted only when the lower signal and one or more upper ones are turned on simultaneously, of which the left one allows movement to the left, the middle one allows movement straight, and the right one allows movement to the right. If only the top three signals are on, then movement is prohibited.

6.9. A round white-lunar flashing signal located at a railroad crossing allows vehicles to move through the crossing. When the flashing white-lunar and red signals are turned off, movement is permitted if there is no train (locomotive, handcar) approaching the crossing within sight.

6.10. The traffic controller signals have the following meanings:

HANDS ARE EXTENDED TO THE SIDE OR LOWERED:
from the left and right sides, the tram is allowed to move straight, trackless vehicles straight and to the right, pedestrians are allowed to cross the roadway;
from the chest and back, the movement of all vehicles and pedestrians is prohibited.
RIGHT ARMS EXTRACTED FORWARD:
from the left side, trams are allowed to move to the left, and trackless vehicles in all directions;
from the chest side, all vehicles are allowed to move only to the right;
from the right side and back, the movement of all vehicles is prohibited;
Pedestrians are allowed to cross the road behind the traffic controller.
ARM RAISED UP:
the movement of all vehicles and pedestrians is prohibited in all directions, except as provided for in paragraph 6.14 of the Rules.

The traffic controller can give hand gestures and other signals that are understandable to drivers and pedestrians.

For better visibility of signals, the traffic controller can use a rod or disk with a red signal (retroreflector).

6.11. A request to stop a vehicle is made using a loudspeaker device or a hand gesture directed at the vehicle. The driver must stop at the place indicated to him.

6.12. An additional whistle signal is given to attract the attention of traffic participants.

Pedestrians who were on the roadway when the signal was given must clear it, and if this is not possible, stop on the line dividing traffic flows in opposite directions.

6.15. Drivers and pedestrians must comply with the signals and orders of the traffic controller, even if they contradict traffic light signals, road signs or markings.

If the meanings of traffic light signals contradict the requirements of priority road signs, drivers must be guided by the traffic light signals.

6.16. At railway crossings, simultaneously with the red flashing traffic light, an audible signal may be sounded, additionally informing traffic participants that movement through the crossing is prohibited.

Online casinos offer free spins to both new and existing customers, as well as in the form of sign-up bonuses and repeat promotions.

How to hit the jackpot?

The multiplier can reach a value of 100.

Argo casino mirror - There is no most correct wagering system; if you are a beginner, choose bonuses with the lowest bets.
When playing for a long time, they can completely fill a special jackpot scale (called the JackPot Meter).
It can vary from x2 to x88.

The return is 94 percent.

The maximum number of referrals will help players receive payments more often.

Matching pictures statistically occur in 23 spins out of 100.
Each prize chain must be on one of the 25 active lines and start from the left row.
The game will begin as soon as the gamer deposits money for the round.
In addition, avid players who want to experience bright and intense emotions can try their hand at playing for money.