Download the program to your laptop and mobile hotspot. The best programs for distributing Wi-Fi from a laptop

Facebook

There are not too many programs for distributing wifi from a laptop - just a few. Therefore, it is possible to download and try everything, which is what I did - I determined the best one for myself.

More precisely, for me it turned out to be stable, simple, small in size, free and in Russian.

The only drawback: it only works on windows 8, windows 7 (XP and VISTA - does not support).

The program is called Switch Virtual Router. There is a similar one, but for me this one was the best.

It can also be easily used via wifi printer, scanner or copier, if they are equipped with Wi-Fi adapters.

I used it to distribute the Internet to smartphones and laptops equipped with Wi-Fi. Everything works perfectly.

You can download the program for distributing wifi from a laptop “Switch Virtual Router” from the link at the end of this post.

In order to start distributing wifi from a laptop, I had to tinker a little so that the process would go faster for you. Below I will give instructions on how to use it.

How to distribute Switch Virtual Router from a laptopwifi

Those who are going to distribute wifi are well aware of how to download the program and install it. So, let’s launch and click: Go to setting.

If you wish, you can check the boxes: launch with Windows and display a list of connected devices, then click “apply” and “OK”.

The entire network has been created - click “start”, just keep in mind if your laptop does not support virtual wifi router, you won't succeed.

To make sure everything is in order, go to the adapter management center. There you should have a virtual one - “Wireless network connection 2".

If there is, then you can distribute wifi. If I distributed the Internet, then I had no problems with smartphones.

Only when I wanted to connect the laptop, it didn’t work, and all the instructions on the Internet didn’t help.

I had to use my brain on my own. Are you wondering how I started distributing the Internet via wifi to other laptops using the Switch Virtual Router program?

Developer URL:
http://switchvirtualrouter.narod.ru

OS:
XP, Windows 7, 8, 10

Interface:
Russian

Category: Uncategorized

A program for distributing Wi-Fi from a laptop may be needed to connect other devices to the Internet (tablet, mobile phone or another laptop), in the absence of a Wi-Fi router.

By downloading and setting up the Wi-Fi distribution program, you can use your laptop as a router for all devices within the signal range. This program creates a virtual point Wi-Fi access. The signal quality and coverage distance depend on the quality of the built-in Wi-Fi adapter of your device.

Programs for distributing Wi-Fi

Let's look at popular free programs for distributing Wi-Fi from a laptop.

MyPublicwifi – demon paid program for distributing Wi-Fi from a laptop, with the ability to view browsing history. It is possible to restrict access to sites. The main advantage of the program is easy setup and intuitively clear interface. It takes up very little space on your hard drive and installs in a couple of clicks.
Maryfi– a program for Windows that uses WPA2 protocols for increased security connections. Supports almost all modern devices, including portable ones.
Virtual Router Plus — universal program for distributing Wi-Fi from various connections(3G, 4G, regular modem). Allows you to filter the list of allowed devices.
Connectify– the first development for distributing Wi-Fi on OS Windows 7, OS Windows 8, OS Windows 1. Available in paid and free formats. Allows you to set a network password. The setup is a little more complicated than in previous programs (you must specify the SSID).

These programs are easy to use and understandable even to those who are far from computers and setting up wireless networks. Their configuration is carried out once and does not require any further attention.

Basic program settings

For correct operation The program only needs to set a few parameters.

HotSpot Name – access point name. You can use any symbols and numbers, or you can come up with an original name that will make your friends and neighbors laugh.
Password – network access point password. Create a strong but easy to remember password. Be sure to write it down so you don't forget.
Internet to Share – LAN card. You need to select the one that works from the drop-down list.
Share Over – traffic distribution board. We also choose one that works (it’s easier to choose this method than to study all the subtleties and nuances of setting up networks).
Sharing Mode – type of network security. We recommend specifying WPA or WPA

You can download a free program for distributing Wi-Fi from a laptop for Windows on our website - just follow the link from the name of the program.

Sometimes it happens that there is no one next to us cable connection and even a wireless network. In this case, you can distribute Wi-Fi from a laptop and provide Internet access to various nearby gadgets. In this article you will find a list of the best programs for implementing the task and in the description of each of them a short summary in which we will tell you whether it is worth using this or that software.

How to connect Wi-Fi on a laptop

Initially, of course, we need to enable Wi-Fi on your computer. To do this, activate the wireless network via the keyboard. Certificate successful start The Wi-Fi indicator will light up.

List of programs

Each of the programs below is capable of distributing Wi-Fi, but the most best utilities we posted first. And, of course, under each description you will find a button where you can download the program from its official website. So let's get started.

All applications below are suitable for operating systems Windows systems XP, Windows Vista, Windows 7, Windows 8 and Windows 10.

The simplest program, which will turn your laptop or computer with a connected Wi-Fi module into a real router. This software has a minimal set of functions, but the main task is still performed. Before you start using mHotspot, do not forget to turn on Wi-Fi on your laptop.

Download mHotspot

Connectify is another laptop program for distributing Wi-Fi. As a result of her work, she organizes a wireless local network, in which connected devices gain access to the Internet.

Download Connectify

MyPublicWiFi is a popular program that, in addition to wireless point includes a firewall that tracks visited sites. Therefore, this solution is perfect for setting up Wi-Fi from a laptop in in public places and distribute the Internet.

There is a function for organizing blocking of various prohibited sites, or disabling, for example, file transfers.

The program is very easy to set up. All you need to do is set the network name and click the share button.

Download MyPublicWiFi

Switch Virtual Router The best decision in order to distribute Wi-Fi from a Windows 10 laptop. The advantages of the program include low load on the PC and no need to start services. And if we turn off wireless device, the computer automatically goes into sleep mode, which is very convenient.

Download Switch Virtual Router

Another utility that can turn a simple laptop (Windows XP, 7, 8, 10) or PC into a real hotspot and distribute the Internet to all devices nearby. The application is easy to use. You simply specify the name of the network, the password to access it and press the start button.

Download Virtual Router Plus

WinHotSpot is another program for distributing Wi-Fi from a laptop on Windows XP, 7, 8, 10. The advantages include complete freeness, and the disadvantages are the lack of Russian language.

Download WinHotSpot

Using this utility, we can also distribute Wi-Fi from a laptop. Naturally, the program not only creates a wireless network, but also provides all devices with Internet access.

If your network needs to be protected from unauthorized access, you can set a password for Wi-Fi and thus weed out unwanted devices.

Download WIFI Hotspot Creator

MaryFi is a free and easy way to share Wi-Fi from your computer or laptop. Any devices equipped with a wireless network module will be able to detect the signal and connect to you. This uses WPA2 class security with network password protection.

Download MaryFi

Virtual Access Point

Virtual Access Point is another useful and simple program, capable of turning your PC or laptop into a full-fledged hotspot and distributing Wi-Fi to everyone.

In this article we will look at the most popular programs, with which you can start distributing Wi-Fi from a laptop or computer that runs on Windows 10, Windows 8 (8.1), and Windows 7. But, I will show the setup process using the example of a laptop on which Windows 10 is installed. All anyway, this is new popular system, and we will consider it using its example. But you won’t notice any significant difference even with Windows 7. So, this instruction is suitable for all computers and laptops that run on Windows 7 and newer systems.

For those who are not in the know and don’t know how to distribute Wi-Fi from a laptop, launch an access point, and what to use it for special programs, I explain. In Windows it is possible to run a virtual Wi-Fi network. Simply put, turn a laptop or computer with Wi-Fi adapter to a regular router. We have internet connected to our laptop. We launch a Wi-Fi access point, in our case using a program, and the laptop begins to distribute the Internet wirelessly. In this way, you can distribute Wi-Fi to your phone, tablet, other laptops, etc. The main thing is that your computer must have Wi-Fi and the Internet (By network cable, or via USB modem).

To launch a wireless access point, you can use special programs. Or you can do without them and start the distribution by completing certain commands V command line, and opening general access to the Internet. For example, it’s easier for me to start a network using commands than to use third party programs. We already have detailed instructions to launch an access point on a laptop via the command line:

And instructions specifically for those who have .

In this article I will show several programs created specifically for launching Wi-Fi distribution from a laptop and for managing a virtual network. I have selected 4 of the most popular programs, including one paid (I don’t know if it’s necessary, but I’ll show it). Today I sat for half a day and tested these programs on a computer with Windows 10. I figured out each one, configured it, and tested it. Everything works for me, the laptop distributed Wi-Fi to the smartphone, the Internet worked.

Select a program:

Virtual Router, she's the same Virtual Router Plus (as far as I understand, in older versions). The simplest, free and working programm. Well, probably the most popular. Works great in Windows 10. There is a Russian language, but the translation is very bad (it's not needed there).
Switch Virtual Router. Another free program for distributing Wi-Fi from a computer. It has more settings compared to "Virtual Router". There is a Russian language and a clear interface. I have already written about this program, but let’s look at it again.
Maryfi(Russian version) . The program is also free, but something didn’t work out for me with it. At first, Yandex didn’t let me into the official website, they say there’s a virus there (but this is not a fact, the antivirus did not swear). I downloaded it, installed it, but still couldn’t start the access point. And in general, problems began with virtual adapter, I had to reinstall the drivers. Maybe it's just me who has these problems. So it seems like the program is good and popular.
Connectify 2016. Very cool and functional program. But it's paid. There seems to be a trial period. By at least, I was able to use it to launch a virtual Wi-Fi network. It’s immediately obvious that the software is paid, there are a lot of cool chips. But I never found the Russian language.

There are, of course, other options, but we will only consider these programs. There are quite enough of them.

Important tip! Choose one program for yourself (Which one did you like the most), download and use it. No need to download and install/launch everything at once. Otherwise nothing will work out at all. If, for example, when starting a network in the Virtual Router program an error appears that startup is impossible, then it will also appear in other programs, since the problem is most likely in the Wi-Fi adapter (there is no driver, it is disabled, wrong driver) . The principle of operation of these programs is the same, we can say that they differ only in the interface, and not very necessary functions (such as autostart, display of Wi-Fi clients, etc.).

The program will only create and run virtual network. You can connect to it, but in order for the Internet to work, you need be sure to allow public access to the Internet (except Connectify). I’ll write how to do this at the end of the article.

We configure it according to this scheme:

Download and install the selected program.
We start distributing Wi-Fi in the program. If a startup error appears, we solve it.
We open general access to the Internet in the connection properties.

Here we go!

Virtual Router Plus: a program for distributing Wi-Fi in Windows 10

I checked the version of Virtual Router v3.3. It is of course very different from Virtual Router Plus, but it works well. You can download it from .

No installation required. Just unzip the downloaded archive and run the file VirtualRouter.exe. Most likely the official website will open in your browser, just close it.

Immediately after launch, Virtual Router will try to start distributing the Wi-Fi network. If the status says “working,” then the network is already running. And now, you need to open public access to the Internet (how to do this, see the end of the article), restart the computer, and run the program again.

And if the status says “Virtual Router failed to start,” then the problem is most likely in the wireless adapter itself. I wrote about the solution to this problem in the article: .

Using the program is very simple: minimize it and it hides in the notification panel. They closed it, the distribution of the wireless network stopped.

Switch Virtual Router program for running a Wi-Fi access point in Windows

I think this is the best program. There is everything necessary functions, Russian language and it is free. You can download it from the link. Or, from the official website http://switchvirtualrouter.narod.ru.

We start the installation and install Switch Virtual Router. Then, we launch the program. If you want to change the default network name and password, then click on the gear-shaped button and set new parameters. There are also other settings there.

To start the access point, simply click on the “Start” button and open general access to the Internet (instructions at the end of the article).

I won’t write anything more about this program, since we already have it on our website. Everything is described there in great detail, with all the nuances. By the way, if the error “Wi-Fi adapter is turned off” appears, then you need to check the operation of the virtual adapter.

Setting up Maryfi. We distribute the Internet from a laptop

If you decide to use the Maryfi program, then the Russian version can be downloaded from (version 1.1), or from the page on the official website http://www.maryfi.com/maryfi-russian-edition.php (I don’t give a direct link, since Yandex says the site is malicious. But the antivirus did not find any viruses).

Run installation file, and install the application. Most likely, when you launch Maryfi for the first time, the program will ask you to install the Microsoft component. NET Framework 3.5. You just need to agree. The system will download and install everything itself. After this you can launch Maryfi.

In fact, the entire program fit into one small window. There we set the network name and password, and click on the “Start Wi-Fi” button. If everything is in order with the Wi-Fi adapter, the network will be launched.

If the network starts, then you need to open public access to the Internet, and you're done.

Connectify 2016 to run Hotspot on your computer

Let me remind you that this is a paid program, but it seems to have a free, greatly reduced version, or trial period. But the program is very cool. A lot of different functions. What I liked most is that you don’t have to manually share the Internet (many people have problems with this). We just choose which connection to share the Internet from, and you’re done.

I downloaded Connectify from the official website: http://www.connectify.me/hotspot/. After downloading, the program must be installed on your computer and launched.

Next, everything is very simple (even without Russian language). Select the connection through which you are connected to the Internet, if necessary, change the network name and password, and click on the “Start Hotspot” button.

The computer will immediately start distributing the Internet. I connected my phone and the internet was already working. After launch, a tab immediately opens that displays connected devices (clients). And it even displays statistics on how much Internet they use. In the program, near the fields, you can see the inscriptions “MAX” and “PRO”. These are most likely features that are only available in the paid version. But you can do without them.

If I'm not mistaken, and there really is a free, stripped-down version of this program, then I advise you to use that one.

Opening public access to the Internet

If you started the Wi-Fi network via Virtual program Router, Switch Virtual Router, or Maryfi, then you definitely need to configure shared access. Otherwise, there will be no Internet access.

Click right click mouse on the Internet connection icon and open the "Network and Sharing Center" shared access". Next, go to "Change adapter settings."

Right-click on the connection through which you are connected to the Internet and select "Properties".

Open the "Access" tab, check the box next to "Allow other network users...", select the connection we created from the list, and click "Ok".

Important! After these steps, you need to restart your computer and restart Wi-Fi distribution in the program. After this, you can connect your devices to the network. The Internet should already be working.

If devices do not connect to a running Wi-Fi network

If during connection an error appears that it is impossible to connect, or an IP address is constantly being obtained, then the first thing you need to do is disable the antivirus. You can also disable the firewall and other programs that may block the connection.

Most often, it is the antivirus that is to blame. It blocks the device connection.

Afterword

It seems to me that there will be a lot of questions about this article. Ask them in the comments.

I tried to describe all the points that may appear during the process of launching an access point using programs. But the equipment, operating system, set of programs and drivers are different for everyone. Therefore, various problems may appear. Read the article carefully, look at the links I provided, and if nothing works, then describe the problem in the comments. Best wishes!