Make a boot sd. Burning an ISO image of Windows to DVD using the UltraISO program


This shows how to burn a bootable CD/DVD using the program
Ultra ISO Portable

If you haven't downloaded it yet.

Tips for recording a disc:

While recording, try not to work on the computer. Before you record
image onto the matrix, you should make sure that the surface of the matrix is ​​clean, without scratches,
dust, dirt, fingerprints. Any surface defect can lead to errors
recording and damage to the purchased blank.

If the recording will be made on a rewritable matrix (RW)
and this is not the first time that such a matrix has been written to, then it is necessary to make
completely erasing the disk. This will prevent old data from being read in parallel with
reading the recorded track.

If you have a program for recording information on your computer installed laser discs Nero,
then to avoid program conflicts, use the path Options>Settings>Record
go to the Recording Settings window

To avoid getting a non-working disk, remove the flag Use NeroAPI if possible.
And click " OK" Next, using the path, File > Open, we enter the window Open ISO file.
For example, here is an image of a Windows XP Pro SP3 boot disk.

Where we select the image file stored on your computer and click Open.


You should pay attention to the information in the Image field. If, there instead Bootable,
there will be an inscription No bootstrap, then you downloaded an image of a non-bootable disk.
You won't be able to download from it. operating system.
This note applies to boot disks.

You can call the image recording procedure through the menu Tools> Burn CD image...
or by clicking the corresponding button on the toolbar.

In the recording settings dialog that opens, select the drive, set the recording speed,
recording method Disc-at-once (DAO): Entirely at one time, set the write check flag.

You should choose the minimum speed allowed for each type of matrix.

The lower the recording speed, the lower the processor load, the greater the reserve time
to replenish the recording buffer with data, burn the track deeper and better.

After completing the settings and pressing the button Write down The recording process window will open and
verification.


At the end of the process you will be notified of the execution result
recording and verification operations. The disc tray will automatically eject.

I draw your attention to the message that The test was completed successfully!
Otherwise, you should repeat everything with another matrix!

Before installing the operating system, you need create a boot disk with Windows 7, from which the installation will be carried out. You can find and download many different versions of Windows 7 on the Internet. However, I repeat that it is best to install original versions of operating systems, not assemblies. We will assume that you already have an image of the operating system on your local disk. As a rule, this is a file with the extension “ISO” - for example, “Windows7.iso”. This is what we need to burn onto a DVD in a certain way.

Why on DVD? I'll explain. The average size of an operating system image is about 3 Gigabytes, so regular CDs simply cannot accommodate a file of this size. Both DVD-R and DVD-RW discs can be used. The only difference between them is that “RW” (ReWritable) has the property of rewriting. That is, such a disc can be erased and recorded many times. And the “R” (Recordable) disc can only be recorded once. To create bootable DVD You will also need a disc burning program in Windows 7.

Currently there are many various programs, however, I recommend Nero Burning ROM", which has long proven itself as professional program for recording all types of discs. One of the most stable versions this program for the operating room Windows systems XP – “Nero Burning ROM 6.6.0.16”. Nero will be more than enough for you. For the 64-bit Windows 7 operating system, it is better to install a version no lower than 10, and better yet 12. For example, "Nero Burning ROM 12.0.20000". At the end of the article I will post a link to this program so that you can download it to your local disk, and then install. Using this particular version of the program as an example, I will show you how to create boot Windows disk 7 .

Having launched the “Nero Burning ROM” program, the following window should appear in front of you, in which you need to left-click on the “Open” button.


Next, in the window that appears, you need to select the image itself that you want to burn to disk. To do this, you must know where exactly this file is located on your hard drive. Click on required file twice with the left mouse button or once with the left mouse button, first on the file and then on the “Open” button. It will look approximately as shown in the picture.


The disc burning settings window will appear. Make sure to the left top corner DVD was chosen. Also check if the “Record”, “Finalize disc” and “Check recorded data” checkboxes are checked. “Record” means recording a disc, everything is clear here. “Finalize a disc” means to “close” the disc after writing so that subsequent writes to it are impossible. “Check recorded data” - after recording, all recorded files are checked for readability. Choose the recording speed at your discretion. You can choose maximum speed. But I personally have had cases where, after recording at maximum speed, some files from the disk simply refused to be read. Perhaps they were just low-quality discs. But I still always choose the “golden” mean. And I don’t always set the maximum speed. So, click the “Burn” button.


A window like this should appear, where the following main indicators are located: write speed, loading of the read-executive buffer, and a write progress indicator.


After the recording is completed, checking the recorded data will automatically begin - “Data Verification”, upon completion of which, if everything went well, the window shown below in the picture will appear, and the tray of your drive with the still warm disc will open. Click the “OK” button and close the program. The disk is ready for installation.


If during “Data Verification” (disk check) messages such as those shown in the picture below appear, it means that the data was recorded incorrectly. In this case, reading occurs with errors. It is not recommended to install the Windows operating system from such a disk. Click the “Cancel” button, and in the window that appears next, the “OK” button.


If you recorded Windows image 7 on DVD-R disc, then it is better to take a new blank disk and do all the above operations to create a Windows 7 boot disk again. If you used DVD-RW disc, erase it by clicking on the “Erase rewritable disc” button in the “Recorder” menu tab, as shown in the picture below.


In the window that appears, leave all the settings unchanged, that is, Erase method – Quickly erase RW disk, Erase speed – Maximum. And click the "Erase" button.


After this, a window will appear showing the progress of the erase operation.


Once the disc is erased, this small window will disappear and the drive tray will open with a now blank disc. You will need to follow all the steps described above to create a bootable Windows 7 disk. And you will need to start with the “Open” button, where in the window that appears you select the desired image with Windows 7 operating system.


If no errors are found after checking the disk, the creation of the Windows 7 boot disk has been completed successfully. The disk is now ready to install the operating system. I wish you success!

Instructions

First, download a boot disk image. It is recommended to use files with iso extension or mdf. Remember that when creating a boot disk image, you need to take several parameters into account. Otherwise, recording such an image will not allow you to create a new multiboot disk.

Now download and install a program called Nero. Better to use comparatively new version, because outdated analogues may not have the functions needed in a given situation. Run the NeroExpress.exe file. In the left pane of the menu that opens, select the DVD-ROM (Boot) option. A new menu will immediately open. Select the "Download" tab.

Now click on the “Image file” item and click the “Browse” button. Select the required ISO disk image. Click the New button. Now add to this disk necessary files, if necessary. Please note that the disc will need to be finalized, i.e. further recording of data to it will be impossible.

After creating the desired project, click the "Record" button. Check the box next to the “Finalize disc” option. Now go to the "Record" menu and select the speed at which it will be recorded new disk. Please note that high-speed discs may not be read correctly on relatively older drives. Now open the ISO menu.

Under File System, select the ISO 9660 + Joliet option. Check all the boxes located in the “Easy Restrictions” menu. Click the Burn button and wait until your boot disk is created.

If you need to quickly burn an image to disk, then run ISO program File Burning. It takes up only a few megabytes on your hard drive. Just click the Browse button, select the ISO file and click on the “Burn ISO” button. Be sure to check the functionality of the created disk.

Sources:

Multi boot disks used to install the operating system (OS) of a computer. The difference between multiboot media and regular installation media is that a number of programs and drivers are added to the image of the former, which are also loaded from disk and can be installed along with the OS.

Instructions

A multiboot disk allows you to work with a computer that does not have an OS installed. This media capable of breaking hard drive into partitions, format them and perform other operations with file system. Antivirus, office and any utilities for installation can also be downloaded. Can be used to record multiboot media specialized programs.

Download images of the boot disk and programs that you want to include in the multiboot disk from a suitable Internet resource. Make sure the file you download is in .iso or .mdf format. It is with these extensions that most utilities for burning installation disks work.

Download and install the XBoot program. To do this, go to the official website of the program and select the download section. After the download is complete, go to the folder where the installation file was downloaded. Launch it and follow the installer instructions. If you find a version of the program packaged in an archive, then simply extract it to any folder convenient for you in the archive manager window.

The need to install or reinstall an operating system on a computer may arise at any time. In this case, it will be very helpful to have on hand bootable flash drive or disk. The site already has an article on how to create a bootable USB flash drive. But you need to keep in mind that you may need to reformat it to record other data, or you will simply lose it.

If your computer or laptop has a DWD-RW drive, then it would be an excellent option to have a boot disk with the required operating system at home, just in case. In this article, we will look at how to create a bootable Windows disk using various programs.

To create it, you will need a computer with a working operating system, the blank itself, the volume of which should be larger than the files you have that you are going to copy. You will also need a recording utility and an image of the operating system you want to record. A suitable program can be downloaded from the Internet, preferably from official websites. The system image can be downloaded via torrent, most likely it will be a file with the extension .iso.

Using the Astroburn Lite utility

So let's make a bootable Windows disk using Astroburn Lite. You can read about the Astroburn Lite program and its installation on your computer by clicking on the link. Insert the disc into the drive and launch Astroburn Lite by clicking on the corresponding shortcut on the desktop.

In the main window, go to the “Image” tab and opposite the “Image” field, click on the “Browse” magnifying glass.

Through Explorer, find the folder on your computer in which you have the appropriate ISO file stored, click on it and click “Open”.

In the Speed ​​field, select the recording speed. Here it is better to choose the most minimum value from the list.

I don't have an empty disk, so the window below looks like this. It will look a little different for you. Check the "Check" box. In this case, immediately after recording, the program will check for errors.

Click "Start Recording" and wait for the process to complete.

This is how we burned a Windows bootable disk from an ISO image using Astroburn utility Lite.

Using UltraISO

Now let's make a boot disk with using UltraISO. Download and install it on your computer.

After launching UltraISO, the following window will appear. Click on the button there "Trial period".

Go to the "File" tab and select "Open" from the menu.

Locate the ISO file of the operating system you want to burn on your computer and click Open.

In the menu at the top, click "Burn CD image".

Check that the drive and file for recording are selected correctly, select the minimum recording speed. There is no need to change anything in the “Record Method” field. Click "Burn".

Wait a little and everything will be ready.

I will end here. I think now you understand how to make a bootable disk from an ISO image with the Windows operating system using one of the programs described in the article.

Rate this article:

(3 ratings, average: 5,00 out of 5)

Webmaster. Higher education with a degree in Information Security. Author of most articles and computer literacy lessons

    The OS installer media is useful. You never know at what point the system will refuse to work or a friend will urgently need to reinstall Windows, let alone a recovery disk that can bring a dying operating system back to life. Let's look at how to create and burn bootable (installation) media for different cases.

    How to create a boot disk for Windows 7

    To create a disk or flash drive to boot the system, you need to have with you what you will need directly during the work process:

    • the media itself (disk or flash drive);
    • utility for working with disk images;
    • disk image or Windows 7 system files to create it.

    Nothing else is required from the user. To begin with, let's get acquainted with the first, preliminary part of creating a boot disk - building an ISO image for its subsequent recording to media.

    Creating and Burning an ISO Disc Image

    Creating a boot disk assumes that the user has ISO image, which will be written to the media. A disk image is a file that represents full copy the entire contents of the disk with software and is widely used in creating bootable disks and flash drives. If the image is not available, you can create it yourself without experiencing any problems: only for this... you will need an existing installation disk with Windows 7 or copied to separate folder system installer files. If you have any of this, you can safely start creating an image for a new boot disk.

    ISO is the most popular format image, and it is with this that most utilities for creating and recording images work. You can also create a recording file using standard OS tools, but there is no data on the quality of such recording on systems younger than Windows 7. That's why third party programs recommended to use in any case.

    Ashampoo Burning Studio Free

    This is a free, lightweight utility for working with disks, characterized by ease of use and a laconic interface, as well as the absence of advertising and built-in malware programs. In it you can not only write files to a disk or flash drive, but also create an image in two ways to choose from: with physical media(CD or DVD that was previously inserted into the drive) and from a folder with files located on the computer.

    Working with this utility is very simple: an ISO image is created in just a few clicks.

    Download Ashampoo Burning Studio Free is available on the official website.

    CDBurner XP

    This program is also free, very easy to use and is considered one of the best utilities of its kind. It is adapted for older versions of Windows, but it also works great in new ones (unless the antediluvian interface confuses you). Just like the previous one, the program can create disk images from CDs, DVDs and user files, and also write them down.


    The utility is available for download on the manufacturer's website.

    Ultra ISO

    The most famous and widespread program that is usually used to create and burn discs is UltraISO. A wide range of functions makes this program universal tool to create and record images, so it is recommended to use it. We'll come back to this program when we move on to burning a disc, but for now we'll look at creating an image in it.


    UltraISO is not a free program, but on the official website you can download its trial version, which you can use for free for some time.

    Video: creating an image in UltraISO

    Creating an image manually

    If you don't want to bother with programs (please note that when registering for installation flash drive you still have to), then Windows has something for you good news: you can create a disk image via the console, regular means Windows. To do this, however, you still have to download utilities: this time official tools from Microsoft that work from the console.

    However, there is nothing particularly difficult about this.

    1. First you need to place the files to be written to disk in a separate folder and save it in a convenient location, for example, C:\Win7ISO. Why convenient? Because the shorter the path to the file, the easier it is to register it in the console.
    2. Then you need to download from the Microsoft website a set of utilities that will be needed when creating the image. The utilities need to be unpacked and installed.
    3. After installing the utilities, you need to open the command line as an administrator (press the Win + X key combination and select “Command Prompt (Administrator)” in the menu that opens) and enter the following code in it:

    4. oscdimg -n -m -b»C:\Win7ISO\boot\ etfsboot.com» C:\Win7ISO C:\Win7ISO\Win7.iso

      Dmitry

      remontka.pro

    The console will start creating the ISO image, and all you have to do is wait for the build to finish. After this, the newly created image will be available in the path you specified.

    Burning an image to a disk or flash drive

    When the boot image is created, all that remains is to move on to the most important thing - writing it to disk. This can be done using Windows tools, and through special programs, some of which have already been discussed above. Programs are a simpler and more popular option, but we will look at both methods.

    Burning an image to UltraISO

    We will show the software recording method using UltraISO as an example, since this program is the most convenient and popular among users. However, you can use any other utility for this: general principle their work is similar.


    Video: how to burn an image to UltraISO

    Manual recording

    This option is suitable for people who use new Windows versions(7, 8, 8.1, 10): they have the best implementation of disc recording. In the case of a flash drive, everything is a little more complicated: the instructions will only work for computers with UEFI. If you don't have UEFI, you will have to use programs.

    If the system being installed is Windows 7 x32, then this method will also not work.

    Let's start by burning the disc. Everything here is extremely simple: you just need to click right click mouse over the image and select the “Burn disc image” option. Of course, you first need to check that the disk is inserted into the drive and there is enough space on it to record the image.

    To manually burn a disk image, just right-click on it and select the appropriate item

    But with a flash drive everything is a little different. To record it, you will need a command line opened as administrator (how to do this is indicated above).

    IN command line The following commands should be entered in order:

    • diskpart
    • list disk
    • select disk N (here N is the disk number under which your flash drive is displayed)
    • clean
    • create partition primary
    • format fs=fat32 quick
    • active
    • assign
    • list volume

    Ready! The flash drive is formatted as bootable, then you need to copy files to it. It's done like this.


    Creating a multiboot disk

    To create a multiboot disk (that is, a disk on which not one OS is installed, but several, and in addition more programs), you will need slightly different software.

    The best choice for today - free program Sardu, which in addition also provides a choice of many images that it downloads itself.

    The program interface is quite complex, so some explanations would be helpful.


    In the main menu of the Sardu program, you can select images and write them either to a flash drive or to a disk
    • antiviruses;
    • utilities;
    • Linux distributions;
    • different versions of Windows;
    • other (allows you to upload your own images, but is only available in paid version Pro).

    On the right are the buttons used to record.


    Creating a system repair installation disc

    To create a system repair disk (this is the one with which Windows 7 can be restored if it fails), you need the disk itself - that's all.


    Creating a recovery flash drive is somewhat more complicated.

    1. In this case, you should create a system image (in the same window where the recovery disk is, there is the “Create a system image” item.
    2. When the system collects and writes the image, you will need to write it to a flash drive using one of the methods discussed above. A little longer, but more convenient: a flash drive is more reliable than a disk. The only negative: the system image for recovery weighs quite a lot, so it is recommended to use a large flash drive or a removable hard drive.

    Reliable media - very important point in the matter of “treatment” or installation of any system. Make sure to burn properly and don't neglect recovery discs: you never know when you'll need to reinstall or roll back Windows. And specialized software they will help you with this.


2024 gtavrl.ru.