Router Huawei Rostelecom. Wi-Fi password


In order to connect a Huawei router,

let's do the following step by step actions. With the back of the router facing you, you need to:

  1. Connect the Internet cable coming into the apartment to the blue socket of the router, called WAN;
  2. Next, you need to connect the wire from the computer to the router into any of the four sockets, they are named LAN1, LAN2, LAN3, LAN4. Can be used both for a computer and for a TV and other equipment that can be connected;
  3. In the Power connector, you need to insert the power cord and plug the device into the outlet;
  4. We also see here the WPS or Reset key, which helps if you have forgotten or don’t want to enter the password, but you need to be near the router, or you need to reboot it. All you need to do is press this key;

We are done with the router connectors and its connection to the computer and network.

Let's go to settings:

  1. Go to the browser and enter the code: “192.168.1.1” - this is the provider firmware;
  1. Since the computer is connected wired connection, then in the window that opens, in the fields that appear (username and password), enter, for example, the same word “Kievstar”

  1. Next, a menu appears with three blocks:

— run;

— WI FI setup;

— checking the network status;

  1. You can immediately use the setup wizard by clicking on this block. Your next steps will be described step by step in the setup instructions on the screen. You can press the button automatic connection, or manual mode button;

  1. We will start with the wi-fi settings block, since the default is DHSP, which is used in our network;
  1. A window opens where the SSID is written - this is the name of the network and its password, which consists of at least 8 characters and can be viewed by checking the required box. There are also buttons to enable, disable the network and save, which we need to click on to save our data.

  1. Next is the Internet tab, where we can see all the addresses, DNS service, and so on, and you can set up parental controls right there.

7.2.View all devices that have ever been connected.

7.3.View the interface, where it will be written which input (LAN..) is occupied, mac-address, ip-address and their settings.

7.4. Wi-Fi settings, where you can configure everything at your own discretion, turn the wireless network on and off, change its name and some other functions. Here you can put the hide network icon, then no one will see it and to connect to it you will need to enter not only the password, but also the name that you specified.

7.5. IN additional settings It’s better not to change anything, since everything is set to “auto” mode and connects on its own, adapting to your Internet provider.

.

7.6. Access to wi-fi networks, here you can put an icon on VPN connection, by pressing a button. This means that you do not need to enter a password to log into the network; you just need to press the button on the back of the router, as mentioned earlier. Allow all devices to connect to the router.

7.7. Guest networks, you can configure a guest network that will not have security or will have it, but minimally;

  1. Maintenance tab. All settings that you have configured are shown here, either in automatic mode network. For example, you can quickly and easily see which input (LAN..) your computer is working on and what other devices are connected to this router and which entrance. Information about network activity is shown, how much is entering and leaving the router.

  1. You can also check the network status. By clicking on the “check network status” section, a window appears showing which devices or appliances are connected to wireless network. IN in this case we see that two devices are connected to this wireless network. Laptop and Android. The Earth icon indicates the Internet gateway, the next one is the router, when you click on it you can get full information about: IP address, mac address, device ID, AO version, software version.

There is a sticker on the bottom of the router. It indicates all the data on the router, name, modification, energy consumption, country of origin, and so on.

The products of the Chinese company HUAWEI have gained popularity all over the world, and this is not surprising - they have enviable reliability, high performance and excellent quality. HUAWEI HG8245h is another development from this company, which allows you to organize access to the network. This optical router allows you to configure the Internet using PON technology. Let's take a closer look at what features the device has and how to flash it.

Provider Rostelecom issues routers for its clients

  • presence of a USB port;
  • the device can be located at a distance of up to 20 km from the transceiver module;
  • Wi-Fi;
  • 2 POTS ports;
  • 2.8*17.6*12.8 cm;
  • 0...40 degrees Celsius;
  • H.248, SIP protocols;
  • 4 Ethernet ports;
  • filter by URL, IP addresses, MAC addresses;
  • port forwarding;
  • 802.11 b/g/n;
  • auto-adaptive port;
  • VoIP, NAT;
  • 60 thousand hours of adapter operation.

According to the manufacturer, the terminal is capable of operating for 23 years, and the maximum power it consumes is 15.5 W.

It is the HUAWEI HG8245h that is issued by the provider Rostelecom for its subscribers. The full name of the product is Echolife HGF8245h.

On the side of the device there are keys for WPS, reset, and Wi-Fi on/off. In addition, here you can see a BBU connector, designed for connecting a backup battery, as well as a USB connector. You can assess the battery charge level directly from the terminal interface.

Connection

Before you start experimenting with the router settings, the device should be connected to the PC and the network. To do this, connect the provider's wire to the router's optical port (located on the left). You can connect to a computer using Ethernet using a patch cord: one end of it is connected to network card PC, the other - into the LAN port of the terminal. Ports TEL2 and TEL1 are used if the network is configured for SmartTV or IP telephony.

Internet setup

First you need to open your browser and enter “192.168.100.1” in the line. Using this path you can enter the interface of the HUAWEI HG8245h router. The system will prompt you to enter your password and login. Under the parameters telecomadmin/admintelecom you can run full customization equipment, and root/admin will give you the opportunity to change Wi-Fi settings.

Once logged in, go to the “Lan Port Work Mode” item in the “LAN” section. Our task is to select the ports that will be used to connect the network. It is best to check all ports at once, but to IPTV usage services, you will need to leave the last port for the set-top box.

Having done this, go to “WAN” and enter the following parameters here:

  • Enable WAN;
  • Service List - Internet;
  • Mode - Route;
  • Binding options - SSID1;
  • Enable VLAN;
  • IP acquisition mode - PPPoE;
  • Enable NAT;
  • username/pass - enter the information provided in the contract (if the document is lost somewhere, call support);
  • Dial Method - Auto.

Don’t forget to also enter the VLAN ID, without which you won’t be able to create an Internet connection. A technical support specialist will tell you the correct ID. The configuration should be saved through the “Configuration File” item in the “System Tools” section.

IPTV

To set up IP television from Rostelecom for the HUAWEI HG8245h router, we recommend creating a new connection in the “WAN” section. As with the Internet settings, here you need to check the boxes next to Enable VLAN and Enable WAN connection. Fill in the remaining fields as follows:

  • Mode - Bridge;
  • Service List - IPTV;
  • Bridge Type - IP_Bridged.

The “Blinding options” parameter is responsible for the port through which it will work IPTV set-top box, so you need to select a free port (LAN4). It is also important to set priority 4 opposite “802.1p”. The main parameter is the VLAN ID, it is issued by the provider.

In the next step, go to “IGMP Configuration” in the “Network Application” section. All you need to do here is set the Snooping parameter opposite IGMP Work Mode, and enable IGMP (IGMP Enable).

Wi-Fi setup

First you need to open the WLAN tab. Here, the developers of the HUAWEI HG8245h router suggest naming your network (SSID Name) and choosing the encryption type for it. By setting the Authentification Mode parameter to “WPA/WPA2”, a menu with security settings will open. All that remains is to enter the password in the WPA PreSharedKey field. Remember that the boxes next to the WMM Enable, Broadcast SSID and Enable SSID fields must be checked.

Today you can connect to the Internet in one of many ways. For example, you can use a USB modem, an optical cable, or even a satellite dish. But the most convenient way to connect to the Internet is through a cable and a router. In particular, one of its advantages is stable signal transmission at high speed. And the price of the modem is relatively low.

The Chinese company Huawei, along with smartphones, produces other useful mobile gadgets. In particular, we are talking about modems. Today we propose to talk in detail about the model Huawei modem HG8245h is a modern means for high-speed data transfer. Through this router you can connect any multimedia gadgets, including desktop computer, mobile phone, laptop or tablet. You can also connect to IPTV through the router to watch your favorite programs in excellent quality.

Externally, the Huawei hg8245 router looks very stylish and modern. Compared to devices of previous generations, it is thinner and longer. Therefore, it takes up minimal space on a table or other work surface. It can even be mounted on the wall. Especially to implement this task, there are special connectors for fasteners at the bottom of the router.

The connection to the router occurs through two wires. One of them is optical, and the second is for the LAN connector. When connecting for the first time, you need to activate the router’s power via the button on the back wall of the gadget.

Login via Web interface

After turning on the 4g router, to activate the device you will need to do Huawei setup. Most important steps, which must be performed immediately after initial startup:

  1. Make sure that the connecting cable is connected and the POWER button is lit.
  2. Launch the browser on your computer and type in address bar a simple set of numbers: http://192.168.100.1, following this link.
  3. You will see a page where you need to enter your login and password. The default login here is Root, and Admin password. This information needs to be specified.
  4. Having entered all this, click on the Login button and go to the router’s page on the Internet.

Internet and connection types

On the page you find yourself on, you will need to set all the ports that will be active. Immediately after this we do the following:

  1. On the WAN tab we find the “Modifications” column and in it - the Route subsection. There is a servicelist item, opposite it we indicate INTERNET.
  2. Select the connection type. To do this, find the IP Acquisition mode field and select PPPoE there.
  3. When completing the Huawei setup, we confirm that the previously specified LAN ports will be active for connecting via the Internet and that we need to save this data (click on the Apply button).

Setting up a Huawei wi-fi router for Rostelecom

Most of the newest operating systems, given that correct settings modem, automatically provide a high-speed connection. If this does not happen, then you can additionally try logging in through the control panel.

  1. Go to Network Sharing Center and shared access. Here you need to select the option for a new high-speed connection.
  2. Specify the username and password. If you have concluded an agreement with the provider Rostelecom, then the relevant information is in it.
  3. Specify WLAN ID. To obtain this data you must contact your provider. The support team usually helps. Having received the data, you can turn on the Rostelecom router, setting up Wi-Fi.

The same algorithm of actions is suitable for Kazakhtelecom.

Huawei router settings for Wi-Fi

To properly configure Wi-Fi on your router, you need:

  1. After disconnecting the Optical cable, enter the router settings (the familiar web interface will help with this). We wrote above about how to enter the router settings.
  2. Select the WLAN tab and check the box next to the item that requires activation.
  3. The system will ask you to enter the SSID name, that is, the network name. Which text or digital option to choose is up to you. The maximum allowed number of simultaneously connecting people is set here.
  4. On an already configured router, you need to select a wireless network password. It should include big and small letters, as well as numbers. In the classic version, this parameter is configured with a code of 10 characters or more.
  5. Having specified the router address, we set the network security key.
  6. Save the data and open the browser - Wi-Fi already must be active.

How to set up IPTV

Many people are interested in the question of how to provide access to IPTV through a router. This is not difficult to do, and if you complete the simplest settings, you will be able to watch digital channels in excellent quality. Even if you have not previously configured a modem and had no idea what and where to insert into the router, the recommendations below will help you.

  1. We go to the browser at the same address indicated above and already familiar to us from the description in the previous paragraphs. Enter the same login and password information.
  2. Select the “Network Settings” tab. Here we activate multicast data transfer by checking the box next to Enable IGMP. Upon completion, save the data.
  3. Go to the WAN settings and create a new configuration. The connection to the router in this case is of the IpoE type.

Having completed entering all the data and indicating that you want to connect the Multicast VLAN ID, do not forget to save them.

Reset

If you need to reset everything installed settings router to factory settings, then the procedure is carried out as follows:

  1. Click Reset button when the router is turned on.
  2. Hold it for a few seconds and release.

The system has been reset to factory settings, and now you can configure it again.

Changing the factory password

It is recommended to change the factory password set by default on the modem immediately when initial setup. How to open desired page in the browser, you already know - it is located at the numeric address repeatedly mentioned in the article.

Next, go to the “Security” tab. The system will first ask you to specify your old password and login, after which it will ask you to enter new ones and confirm your actions. Specify the appropriate combination and save it.

Firmware update

If interruptions are noticed in the operation of the router, then it is quite possible that its firmware should be updated. This is done like this:

  1. Download the archive to your computer from the required version firmware. To do this, it is very important to know the exact name of the router model you have in your hands. Find the required firmware It's very easy on the Internet.
  2. Log in to the usual address http://192.168.100.1 in the browser in the settings menu.
  3. We go to the system settings and agree to the update, indicating the path where the new firmware is saved.
  4. When the process is completed, the settings will be automatically reset to factory settings, and you will have to reconfigure the router.

Huawei produces some of the most affordable and popular wireless modems both stationary and mobile. Their various models use cellular and wired telephone networks for transmitting and receiving information. The most convenient and practical version is wireless mobile. It can be used wherever it works cellular. That is, by connecting such a device to a computer, you can access the Internet from almost anywhere. It has compact dimensions, almost always - USB interface, low price, wide choose payment tariffs, simple management and installation. We will tell you in more detail about the latter - how to connect and configure a Huawei modem.

Find out how to connect and set up Huawei

How to set up a Huawei modem: step-by-step instructions

  • Remove the cover from the device and insert a SIM card that supports 4G service into the special slot.
  • We insert the device into the USB connector of the computer.
  • In the browser that opens, we see a settings window with empty lines into which you should type . Enter the word admin and click on the “Login” button to go to Huawei settings.

  • We see a page with several tabs at the top. Select the “Settings” tab and click on the “New Profile” button.

  • In the new window, fill in the empty lines: “profile name” and “access point”. “Username” and “Password” are filled in as desired. In the first line we enter any name, for example, Olga17, into the Huawei “access point” APN address: internet.olga17.ru. Save Huawei settings.

  • In the next window you need to configure Wi-Fi on Huawei. We see the lines “SSID” and “ WPA-PSK key" This is the Wi-Fi network name and password. The data for them is located under the cover of the gadget. We drive them in and click “Done”.
  • Go to the “Home” tab and check if the “Connected” message appears. If yes, congratulations - you managed to set up Huawei! If not, go through all the points again step by step instructions maybe you missed something.

How to set up, view or change the password on a Huawei modem


Huawei ADSL router: how to connect a modem to a computer

In addition to models with USB, Huawei produces ADSL routers for home use. They work at

Currently, there are several ways to access the Internet. You can connect to the network using a USB modem, satellite dish and optical cable. Connecting with a cable and a router has its advantages. This is a stable signal reception level, high speed data transfer and reasonable price. A router is the choice of those who value the reliability of transmitting their data. How to set up a router will be discussed in the material.

Huawei HG8245 router – modern remedy for high speed internet. Home or office multimedia gadgets that use internet access can be connected through this router. With one Huawei HG8245 router you can connect several devices. This includes a desktop computer, laptop, tablet, and cell phone. In addition, by connecting to the IP television service, you can use this router to watch your favorite TV programs in high definition.

The HG8245 optical terminal is equipped with 4 outputs for " fixed connection"(LAN) and 2 telephone outputs for IP telephony. The advantage of this model is the presence WI-FI functions. Thus, using the Internet at home or in a small office becomes even more convenient.

Characteristics

By appearance this router is different modern design. It is longer and thinner than routers previous generation. With a length of 19.5 cm, the thickness of the router is 3.5 centimeters, it will not take up much space on a computer desk or on top cover system unit. It can also be mounted on the wall - for this purpose, mounting connectors are located on the bottom of the device.

In addition to several connectors for communication with a computer, the HG8245 is equipped with connectors for connecting a television cable (IP-TV), and IP-telephony inputs. In addition, you can connect a backup battery to the router, as well as a USB memory device.

Connection

Two wires are connected to the router: one – optical – to the Optical input, the second – to the LAN connector. When connecting to the Optical connector for the first time, you do not need to connect a wire. Next, you need to turn on the power of the router by pressing the on/off button located on the back wall of the device.

Login via Web interface

To configure the Huawei hg8245 router after turning it on for the first time, you must:


Upon completion of the data collection, all you have to do is click the “login” button and go to the router’s web page.

Internet and connection types

On the loaded page “http://192.168.100.1” you need to set all active LAN ports in the corresponding section of the menu (tick them) and save the changes.

After this, you need to follow the following algorithm:


Setting up the HuaweiHG8245 router for Rostelecom

In most modern operating systems, with a properly configured router, a high-speed connection is created automatically.

If this does not happen, you can create a new connection through the control panel:


MGTS

If your provider is MGTS, setting up the Huawei hg8245 router is quite easy. To do this, you need to create a high-speed connection. Except standard method through " Network connections” in the control panel, it can be created and edited in the router menu on the web page.

This requires:

  • follow the link http://192.168.100.1, on the “WAN” tab in the “Username” section, enter the login that is specified in the agreement with MGTS, and in the “Password” tab enter the password;
  • After activating the ports, you need to go to the “WAN” tab and create a new connection. To do this, click the “New” button;
  • then in the “Mode” mode you need to select the “Route” section;
  • Next, set the settings as follows: service list – INTERNET, connection type – PPPoE;
  • We fill out the “login” and “password” fields using the contract data. The name and code are indicated in the text of the agreement with the provider;
  • in the “Blinding options” section, you need to check off those ports that were activated at the very beginning of the setup;
  • in addition, you must specify the WLAN identification number; you can find it in the technical support of the provider you connected to;
  • Finally, the data must be saved, the computer can be restarted, and after that, to work on the Internet, you will need to connect the cable to the “Optical” connector.

Video: instructions for opening ports

Turning on and setting up Wi-Fi

For the right Wi-Fi settings necessary:


IPTV

Using the HG8245 router, you can watch digital channels in excellent quality.

To set up a router for IPTV, you need:

  • log in via browser at http://192.168.100.1. To access the settings page, you must enter the following data: username “root” and password “admin”;
  • then go to the Network application tab. Here you need to enable group data transfer. To do this, you need to check the box next to “Enable IGMP” and set the search mode to snooping, and then save this data;
  • in the WAN Settings menu section (WAN->WAN configuration) you need to create a new configuration by clicking the “New” button;
  • then in the “Encapsulation mode” column, select the connection type - IPoE. For IP-TV you need a protocol version - IPv4;
  • configure the configuration for connecting the set-top box like this:

After completing data entry, you must go to menu mode system settings(“System tools”) and save the configuration for digital television by clicking on the “Save configuration” button.

Reset

Sometimes it becomes necessary to reset the router settings to factory settings. This is due to insurmountable errors in the operation of the router that are not related to the technical component. In some cases, the need to reset settings arises if the user has forgotten the router password and there is no way to recover it.

To reset settings and personal passwords The HG8245 router has a “Reset” button.

To reset installed configurations, follows:

  • press the “Reset” button when the router is turned on;
  • hold for a few seconds and release.

After this, you can disconnect the optical cable and configure the Huawei HG8245 router again.

Changing the factory password

Many people know how important it is to install strong password on wireless connection, however in Lately The security of the router password is also important. Knowing his password, attackers are more likely to monitor the user’s online activity, steal confidential data, and even block access to the Internet. Therefore, it is recommended to change the factory default password.

To do this you need:

  • with the router turned on, go to the terminal page – http://192.168.100.1, specifying the default data: login – root, password – admin;
  • then you should go to the “Security” tab;
  • when changing the password, you will need to specify the old login and password, and then - New Password and its confirmation. To increase safety, it is better to use long and complex passwords– from 10 characters – Latin letters and numbers.

Firmware update

Modern routers, as a rule, use universal and flexible program codes, allowing you to make changes to the network configuration and easily change passwords. However, not all firmware is the same; the router may begin to work intermittently, and access to the Internet may be lost. In this case, updating the firmware will help.

To do this you need:


Once the update is complete, the router should reboot. After updating the firmware, the router settings will be reset to factory settings, so to access the Internet you need to configure the router.

Modern router manufacturers are trying to ensure that everyone, even a novice computer user, can configure and use it. To do this, clear and understandable instructions to the user are placed on the sites, and the system quick launch device helps prepare the router for operation. The main thing is that the more competently the router is configured, the fewer interruptions in the Internet.


2024 gtavrl.ru.