Samsung firmware 4 file firmware. Firmware

Facebook

Odin will become quite useful tool, which will allow product owners trademark Samsung to flash its devices. Next will be given detailed instructions via firmware via Odin. It is worth noting that the program was developed by professionals, so you don’t have to worry about the quality of the final result. Firmware via Odin is very simple and does not require users to have deep knowledge in certain aspects of Android devices.

Similar about Odin

The application was developed for Windows OS. After downloading the program, you get the opportunity to flash your Samsung phone or tablet. Once upon a time, Koreans used the utility only as professional software, introducing updates for their devices. Fortunately, its files were leaked onto the Internet, allowing every Samsung fan to use it. You can download the application on many fan sites dedicated to the Korean manufacturer or Android devices in general. have long ceased to be dangerous for your devices. However, not all users dare to do so radical measures, getting rid of stock ones and going free of pirated programs. It is worth noting that updating Samsung firmware via Odin will open up new capabilities of your device that are not available in stock solutions.

This is where a dilemma arises, because many people establish a certain identity that looks like this: flashing = big risk = loss of warranty on the device. But all these are just myths based on long-standing stereotypes. Nowadays there is simply an insane number of owners of Samsung devices in the world, so a measure was taken to create software that would be suitable only for these devices and only in a high-quality form. It was Odin that became such an application, “flying in” from the world of Scandinavian mythology. And here you can be 100% sure that you will definitely not harm your phone or tablet by using this program.

Program versions

In order for the firmware to be successfully installed via Odin, there are a number of different versions of the program, each of which is designed for a particular Samsung device. The main file extensions include the following: .bin, .tar and .md5. By the way, the most stable versions are 1.85, 3.07 and 3.10.6. Next, we will indicate how the Samsung firmware should be installed through Odin, and also talk about the main options of the program.

Program options

So that you don’t get lost in the Odin program, we will conduct short excursion by main options:

Auto Reboot - if this option is checked, your device will automatically reboot after successful completion of the firmware;
Re-Partition - allows you to redistribute file system according to factory presets (RFS);
F. Reset Time - function allows you to reset the counter of previous firmware;
PIT - if the Re-Partition function was checked in the second one, you will need to specify the path to the .pit file, which will make it possible to redistribute the device’s file system;
CSC - designed to open a file that contains data specific to certain states and operators;
PDA - the option is necessary to select the necessary files with firmware;
Phone - allows you to select the modem file that is needed for the firmware process.

You need to be extremely careful when using the Odin program. This is especially true for the Re-Partition function, because if you do not have a .pit file, then it is better not to check the box next to this option. Finally, it is worth remembering that the software is intended only for Samsung devices. Flashing other brands of phones via Odin can lead to unpleasant consequences. As alternatives, you can use FlashTools or KDZ Updater.

Preparing for the firmware process

In order for Samsung firmware via Odin to be successful, you need to complete several preparatory steps. The algorithm of actions will be as follows:

First of all, you need to download and install USB drivers for your device. If desired, you can use Samsung Kies, during installation of which the drivers will be installed automatically.
Then you need to make sure that there are backup copies on the device important files, which will be lost after the firmware. It is advisable to create backups on external map memory or computer.
Next, we charge the phone/tablet to 100% (or at least 80%), so that the power does not go out during the firmware process.
In the settings, enable the option “ USB Debugging", which is available in the "For Developers" section. We make sure that Samsung app Keys is not running. Otherwise, disable it through Device Manager.

It is worth noting that when installing official firmware via Odin, the chance of damaging the device is extremely low. Of course, if you follow all the instructions. Nevertheless, all actions are performed at your own peril and risk, so if you are not sure end result, it is better to take your device to a service center. Next, let's move on to the firmware process itself.

Firmware process

As an example, we will describe how firmware should be installed via Odin. The algorithm is as follows:

First of all, download official firmware for your device to your computer.
Next, enable download mode on the device. As a rule, in Samsung devices it is launched by pressing the following key combination: Power (Turn on/off the device) + Volume Down (volume down key). Then confirm the action by pressing the Volume Up button. Be sure to press the keys at the same time.
Next, launch the Odin program on the PC and make sure that the Auto Reboot and Reset Time options are checked. This is extremely important.
We connect the phone or tablet to the PC using a USB cable. After detecting your device, the program will change the color of one of the ID:COM windows.
Next, press the PDA button located in the Odin program interface and select the .tar or .md5 file.
Click on START, after which the firmware process starts. Disconnecting your device from the PC during installation is strictly prohibited.
Once your device has successfully completed the firmware process, it will automatically reboot. At this stage, you can remove the cable from the PC and start using the device. As you can see, everything is very simple.

This instruction for flashing firmware via Odin is the most common. If you adhere to all points, success awaits you!

Creating Root access to Samsung Galaxy Note 2 phones

If you need to open the “superuser” mode, then the Odin and SF-Autoroot programs can help with this. So, we follow this algorithm of actions:

Download SF-Autoroot for a certain model phone, which can be found in the settings menu item "About phone". The files themselves can be easily found on the Internet. If you cannot find a file for a particular model, it is better to leave everything in stock mode, because other actions can harm the device.
Download Odin and install USB drivers for your phone.
Turn off Galaxy Note 2 and put it into download mode. It turns on by simultaneously pressing 3 buttons: Volume Down + Home + Power. Then, to confirm the actions, press Volume Up and connect the device to the PC.
In Odin, click on the PDA button, where we select required file, which has the extension tar.md5. Then check the boxes next to the Auto Reboot and F. Reset Time options. Make sure that no other functions are checked.
Click "Start" and wait for the installation to complete.

As you can see, flashing firmware via Odin is not the only advantage of this program. If you do everything wisely and according to the instructions, the application will be an excellent help for owners of Samsung devices.

This time I will show you how to install stock firmware on your smartphone or tablet. Samsung lines Galaxy, that is, restore the state of a new device. This method will also allow you to revive your gadget after an unsuccessful installation of custom firmware or get rid of problems with the operation of the device. You can also update your device to latest version Software if you can’t wait for an over-the-air update. Everything is completely safe!

This method involves using the convenient Odin utility for Windows. Don't worry if you're not familiar with her. Thanks to step by step instructions Below, you will learn everything you need to successfully restore via Odin. It is worth noting that all data stored in internal memory The devices will be erased, so save them to your computer before you begin. You can also create backup copy SMS, contacts, media files and much more by reading our guide.

How to prepare for the Samsung Android device recovery process:

So, are you all set? Have you installed the drivers and rebooted your computer? Have you unpacked the Odin program archives and firmware? Is your smartphone/tablet charged? Then let's get started! Follow my instructions carefully and in 15 minutes you will receive a device with a freshly installed software.

How to restore stock firmware on any Samsung device:

Step 1: Launch Odin on your computer.

Step 2: Put your mobile device into Download Mode. To do this, turn it off, and then press the buttons one by one “Volume Down”, "Home" And “Nutrition“. Then press the button once “Volume Up”, to continue.

Step 3: Connect the gadget to your computer via a USB cable.

Step 4: When a blue light appears in front of the connected port in the Odin program, click on the button "AP" and select the firmware file that you should have downloaded in advance.

Step 5: The Odin utility takes a few minutes to check the firmware. When it is ready, press the button "Start", which is located at the bottom of the window.

Step 6: After the process is completed, the device will reboot automatically.

Step 7: In a few minutes you should see the screen initial setup, where you need to select the interface language, connect to the network, add an account, and so on.

That's all! Now your gadget has stock software installed that will receive official updates by air.

Before flashing Samsung via Odin, you need to adhere to some strict rules, otherwise you may end up with an excellent tool for cracking nuts, because it will not be suitable for anything else! Our instructions will help you eliminate such errors.

Before installing the firmware, we recommend doing Backup ( backup information on the phone). There are several applications: for older devices up to android 4.3 and for android 4.3 and higher. You can try as well, but it requires .

Firmware via Odin main rules

You need to know that you should never flash Samsung using Kies or Smart Switch programs, the reason is this:

Not fully downloaded firmware from the Samsung server.
Poor quality firmware Android files, due to which the device is regularly restarted (the /data partition is not deleted).
Flash your smartphone exclusively Odin program
Be sure to flash with at least 50% battery charge and stable power supply to the PC.
Don't pull USB cable in the process of flashing a smartphone.
You need a branded and undamaged USB cable.
It is important to use only the original USB cable that came with the device. Using low-quality wires, you risk turning your smartphone into a brick.
The path to the firmware must be without Russian letters (C: folder - not correct, C: or C: samsung - correct).

How to flash a smartphone via Odin

Download the official Samsung firmware file to your PC.
Install the driver.
Download and unzip.
Prepare the original USB cable.
Go to settings - "Developer options", "Enable USB debugging", for new devices you will also need "OEM unlocking" and disable " Remote control", see the diagram at the very bottom of the last picture.

Sources where to download firmware

How to use this software:

For example, you are looking for firmware for the S7 Edge SM - G935F smartphone.

Launch Firmware Linker.

Enter in the program the name of the group to which your device belongs (EK, GT, SC, SCH, SGH, SHV, SHW, SM, SPH, YP) and click " Enter".

Print the model, for example (G935F) - press "Enter".

You will be redirected to the website Samsung firmware.

Switching your Samsung smartphone to flash mode

When you download and install the drivers and firmware, switch your smartphone to firmware mode (bootloader or download):

Turn off the device and press the buttons " Volume Down" + "Center button" + "Power button".

A similar menu will appear, release all buttons and hold down " Volume up".

We switch the smartphone to " Download". Turn off your device and press the buttons " Volume down" + "Power button".

A message similar to this will appear:

If it doesn't work, enter the " Download":

Download the ADB RUN program.
Enable USB debugging.
Connect Android smartphone to PC.

Open the program Adb Run and enter the menu:

"Reboot Device" - "Reboot Download".

Connect Android to your PC and wait for the drivers to install.

Enter the Odin program, a notification will appear at the top left when you connect your smartphone:

Load the firmware files into the Odin program. After this, we will begin the flashing process, or rather configure it correctly so that everything works.

Single-file and multi-file firmware

Firmware using Odin can be single-file or multi-file:

Single-file - there is only one firmware file.

Multi-file - have several firmware files.

Firmware extensions (*.tar or *.tar.md5).

Single-file firmware:

Upload the file to the AP or PDA field (to upload, press the AP or PDA button).

Multi-file firmware:

Select the firmware files and paste them into the appropriate fields:

PIT (if any) in the PIT line (click on the PIT button)
APBOOT_*****.tar.md5 in the BL or Bootloader line (click on the Bootloader button)
CODE_*****.tar.md5 in the AP or PDA line (click on the button)
MODEM_*****.tar.md5 in the CP or PHONE line (click the button)
CSC_*****.tar.md5 in the CSC line (click on the button)

Do not touch anything else and do not check the boxes in the left corner unless necessary.

When you select the files, click the " button START", then the flashing process will begin at intervals of about 2 - 5 minutes. At the end of the download, a notification will be displayed " PASS" or " RESET", then you can disconnect Android from PC.

What to do if your smartphone freezes and does not boot after flashing?

If an error occurs or Samsung is stuck on eternal loading, when the firmware was flashed via Odin, you need to reset the settings ( Hard Reset) or otherwise called WIPE, if you provided Root or installed custom firmware, the electricity went out, then you will need advice on how to restore Samsung after unsuccessful firmware.

The main troubles that arise at the flashing stage:

Odin does not recognize the device
Stuck at loading stage
Crash at the stage when flashing the firmware using Odin
Sudden break
Failure to start updating your smartphone

To understand the malfunction of the Odin program, your PC and Samsung, you will need this guide - Main errors at the stage of flashing Samsung.

How to flash kernels (boot.img, zImage), Recovery files or modems

How to flash a modem

If you need to flash the modem, then load the modem file in the CP (Phone) line in the Odin program and start the flashing process.

How to flash the kernel or Recovery

Firmware using Odin third-party kernels or Recovery with installed Android 5.X.X and higher, requires changing some parameters in the Android settings:

Activate "USB Debugging" in the same tab, activate "OEM Unlocking"

Turn off" Remote control"Samsung. Flash the kernel, Kernel or CWM means that the file must be loaded into the AP or PDA field and then flashed.

Possible errors during the Recovery installation stage

In case, after flashing custom Recovery, it remains the usual factory one, then look at what you can do:

Uncheck this box Auto Reboot in the Odin program.
Try flashing custom Recovery again.
Turn off your Android device.
Turn on Recovery mode(if the smartphone starts to boot into normal mode repeat the process a couple of times).
Use the patch (root rights).

Every smartphone user is not immune from failures in its operation, and sometimes from complete system failure. Often one the only way out the firmware remains mobile device. Among owners of phones based on OS Android program Odin is considered an indispensable tool for flashing the device. It is quite simple to use, but there are some nuances in the program settings.

Firmware is a cure for all diseases

Modern smartphone or tablet - powerful computer carrying on board multi-core processor, graphics accelerator, gigabytes of RAM and solid state memory, as well as a variety of peripheral devices. It works under control operating system(in our case - Android), and individual subsystems: radio module, camera, biometric sensors - are also controlled by their own microprograms.

Firmware is a specialized distribution kit that contains all the software components necessary for the full operation of the “gadget”. To flash a device means to install this distribution into the device's memory. And there are usually only two main reasons for updating firmware - updating to new version or restoring a broken smartphone. After the firmware has been correctly installed, we receive the device in a new condition, just like from a store.

The main reasons for flashing firmware are updating or restoring a broken smartphone

The flash memory of the smartphone, on which the firmware and microprograms of the radio module are written, is designed for limited quantity recording cycles. Therefore, you should not flash several times a day in search of the perfect firmware. When the Flash memory cannot record, the device will have to be thrown out or disassembled into “organs”.

Types of firmware

There are several types of firmware for Android smartphones or tablets:

OTA firmware, loaded into the device “over the air”, via cellular networks 3G or Wi-Fi. It contains updates individual programs or a newer version of the Android operating system. At correct installation user data, Accounts And installed applications are saved. Such firmware is the easiest way to flash a smartphone, but also the most dangerous: often during this operation the device becomes a “brick” - it does not respond to keys, the sensor and does not display anything on the screen;
firmware in the form of a zip archive. Designed for installation into the device via Recovery - a built-in flash driver, which can be accessed by pressing when turning on a certain combination buttons Firmware rewrites system partition - installed programs and accounts are deleted;
single-file firmware for the Odin program. Contains an operating system with pre-installed applications. As in previous version, programs and user accounts are deleted;
The 5-file firmware consists of the operating system, service firmware and partition tables of the device’s internal memory. Installing it deletes absolutely all user data from the phone’s memory, including those that were on the “internal” memory card.

Forewarned is forearmed: preparing the phone for firmware

During the production process, the manufacturer may make changes to the design of the smartphone/tablet. Therefore, devices released at different times may differ in hardware, despite the same appearance, model name and operating system. Before flashing the firmware, you need to identify the hardware revision of your device as accurately as possible. In most cases this can be done by checking serial number smartphone on specialized forums. For example, on a smartphone Samsung Galaxy Win (GT-85520) there are two hardware revisions and they require different firmware.

We list the criteria for successful smartphone firmware:

firmware downloaded from the network corresponding to the hardware revision of your device;
smartphone drivers and the Odin program itself, downloaded from a trusted source, ideally from the official Samsung website;
battery charged to at least 90%;
reliable, tested cable for connecting to a computer;
computer, as clean as possible background processes and programs, ideally containing only the operating system and the Odin program.

Preparing the operating system

So, the phone is charged to the maximum, a reliable thick USB cable has been found, games have been unloaded from the computer and a thousand tabs in the browser have been closed. It remains to take the last preparatory steps before the firmware process itself:

Remember that a power surge, a pulled out computer power cord or a power outage will lead to an emergency termination of the firmware, and the device will become inoperable - a “brick”. That's why desktop computer connect via source uninterruptible power supply(UPS), and charge the laptop battery.

How to flash an Android device

Working with single-file and 5-file firmware differs slightly. The program has several buttons for selecting the appropriate firmware file:

BL - bootloader (bootloader) - load a file like APBOOT_xxxxx.tar.md5 (will be present only in 5-file firmware);
AP or PDA, depending on the Odin version - the main firmware file CODE_xxxxx.tar.md5 (in the case of a single file - the only one);
CP or PHONE - phone radio module file MODEM_xxxxx.tar.md5;
CSC - file of the form CSC_xxxxx.tar.md5;
PIT - PIT file, is included only in 5-file service firmware. When you select it, the program opens additional settings breakdown of the device's internal memory. Firmware with this file will delete ALL DATA on the device, and if it fails, with a 99% probability it will be “bricked”.

Installing single-file factory firmware

Installation of 5-file service firmware

If the firmware recording is successful, the program will write PASS in the left top corner windows and reboot the smartphone.

Enable Re-Partition mode only in case of serious problems with the device: it does not boot, freezes on the screensaver, there are errors in the internal memory - files do not open or open with errors. Most of the devices that died during firmware were flashed with a 5-file firmware service firmware and troubles happened during the re-partitioning of internal memory. Operating kernel firmware Android systems and Recovery files

After that:

Click the AP or PDA button in the program window and select the *.img file in the window that opens.
Click the Start button.

If your device Android version 5 or higher, before flashing the firmware you need to perform several manipulations with the smartphone itself:

Loading custom firmware

Installing custom firmware via Odin is not the best best method. The safest option is custom firmware compiled for installation from recovery. The risks of getting a “brick” are much lower than when flashing firmware via Odin. Don’t expect miracles from “custom” ones; they won’t make your old device a top-end one. And in terms of stability and energy consumption factory firmware will always be in the lead.

Installing custom firmware is no different from installing single-file factory firmware:

Click the AP or PDA button in the program window and select a *.img file in the window that opens.
In the options block, enable the Auto Reboot mode.
Click the Start button.
If the firmware is successfully written, the program will write PASS in the upper left corner of the window and the smartphone will automatically reboot.

My smartphone is a “brick”

If the firmware completed with errors, the program will report this by writing Fail on a red background. But there are often situations when the firmware was successful, the smartphone went into reboot and never came out of it. Do not panic! The worst has already happened. Remove from device battery and let sit for 20–30 minutes. Then return the battery to its place. Use button combinations to try to enter recovery (Power + VolumeUp + Home) or emergency mode(Power + VolumeDown + Home).

I managed to get into recovery - great! We execute the command wipe data/factory reset and try to reboot the smartphone. If we can only enter emergency mode, we try to flash the device with a 5-file service firmware. If it doesn’t help either, the smartphone has a direct route to the service center. Restore it using software methods it won't work anymore.

Video: restoring a smartphone after flashing

In this short article, we looked at the pros and cons of flashing firmware with the Odin program, assessed the risks and learned what to do if the situation develops abnormally. Don't forget that the program is designed for service centers, and not for smartphone users and allows you not only to bring a junky device back to life, but also with a couple of keystrokes to send a previously working smartphone or tablet to digital paradise.

(How to distinguish the Original single-file firmware from the Repacked one)

Contents Repacked : Cache.rfs, Dbdata.rfs, Factoryfs.rfs, Modem.bin, Param.lfs, zImage ( 6 files)

File added dbdata.rfs. To check, open for example in WinRar and see if the file described above is available.

(Connecting the phone and installing drivers. (Required if you have never flashed the phone before))

1. Install Kies or just drivers.
2. We switch the body to the firmware mode, on the OFF body we sequentially press the buttons VOLUME_LOW+HOME (center) and the last one is ON. Hold until a picture appears - a yellow triangle, a robot with a shovel and a bunch of something)).
3. Connect the cable to the PC, the drivers are determined. If the drivers are not installed, check the installation of Kies/drivers.
4. Disconnect the USB cable. Turn off the firmware mode by holding the ON key or removing the battery.

This all applies to the original firmware from fus.samsungmobile.com, which in a decrypted state is posted on XDA-Developers and on SAMFIRMWARE.COM.

(Method No. 1 of installing the Original single-file firmware without Repartition and without PIT)

2. Launch Odin3.
3. Select the TAR file as PDA (Original Single-File Firmware) (Example (picture))

(Method No. 2 of installing the Original single-file firmware with Repartition and PIT)

1. Close Kies and all other applications.
2. Launch Odin3.
3a. Select the TAR file as PDA (Original Single-File Firmware) (Example (picture))

3b. Select Dbdata.TAR file as CSC ( Missing file which is not in the original firmware)
(Example (picture))

DBDATA.tar(1.32 MB) Download- (http://4pda.ru/forum/dl/post/757546/DBDATA.tar)

3s. Select the PIT file and check the box for RePartition (In Odin3 v1.70, the box is checked automatically) (Example (picture))

4. Let's do it full reset to Factory settings.
4a. We switch the body to recovery mode, on the OFF body we successively press the VOLUME_UP+HOME (center) and the last ON buttons. Let's keep it until it appears Galaxy screensaver S, then release the ON button and continue to hold the other 2 buttons until the Recovery Menu appears. In the Menu that appears, do “Wipe/Fact. Reset” and Formatting SDcard.
4b. The second option, resetting all settings to Factory, is done using the code *2767*3855#.
5. We switch the body to the firmware mode, on the OFF body we sequentially press the buttons VOLUME_LOW+HOME (center) and the last one is ON. Hold until a picture appears - a yellow triangle, a robot with a shovel and a bunch of something)).
6. Connect the cable to the PC. Attention: We are already connecting in firmware mode!!. In Odin3, some COM should appear in the ID:COM field, and the field turns yellow. (Example (picture))

7. Click Start. The green bar should run and messages should appear in the Message field.
8. After 3-5 minutes, the firmware is completed, the first cell turns blue, the body begins to reboot. Disconnect the USB cable!
9. This item is optional. It won't get any worse. Repeat the factory reset step 4.

This all applies to repackaged firmware with fus.samsungmobile.com, which are posted everywhere, including here.

(Installation method Repacked single-file firmware)

1. Close Kies and all other applications.
2. Launch Odin3.
3a. Select the TAR file as PDA (Single-file firmware Repacked) (Example (picture))

3b. Select the PIT file and check the box for RePartition (In Odin3 v1.70, the box is checked automatically) (Example (picture))

4. Do a full reset to Factory settings.
4a. We switch the body to recovery mode, on the OFF body we successively press the VOLUME_UP+HOME (center) and the last ON buttons. Hold until the Galaxy S screensaver appears, then release the ON button and continue to hold the other 2 buttons until the Recovery Menu appears. In the Menu that appears, do “Wipe/Fact. Reset” and Formatting SDcard.
4b. The second option, resetting all settings to Factory, is done using the code *2767*3855#.
5. We switch the body to the firmware mode, on the OFF body we sequentially press the buttons VOLUME_LOW+HOME (center) and the last one is ON. Hold until a picture appears - a yellow triangle, a robot with a shovel and a bunch of something)).
6. Connect the cable to the PC. Attention: We are already connecting in firmware mode!!. In Odin3, some COM should appear in the ID:COM field, and the field turns yellow. (Example (picture))

(Installation method of Repacked 3-file firmware)

1. Close Kies and all other applications.
2. Launch Odin3.
3a. In the PDA field, select the PDA part of the firmware packed in TAR or TAR.MD5. (Example (picture))

3b. In the PHONE field, select the MODEM part of the firmware packed in TAR or TAR.MD5. (Example (picture))

3c. In the CSC Field, select the CSC part of the firmware packed in TAR or TAR.MD5. (Example (picture))

3d. Select the PIT file and check the box for RePartition (In Odin3 v1.70, the box is checked automatically) (Example (picture))

Additionally - (