The firmware for dir 300 is not official. Emergency firmware recovery


Today we will look at the process of flashing the extremely popular D-link Dir-300 router in Russia. Despite the fact that the firmware process this router does not present any particular difficulties; sometimes this task confuses a novice user. I will explain to you how to flash D-link Dir-300 in a simple and accessible instructions. We will also find out where download firmware for Dir-300, without fear of downloading a virus instead of the firmware. So let's get started.

Preparing for D-link Dir-300 firmware

If you have already connected the router and know how to log into the admin panel via 192.168.0.1, you can skip the preparation process. For everyone else, let's write a few words about connecting Dir-300.

1. Connect the router with the cable provided to the network card of the computer from which you will update the firmware. Port LAN1 - to the computer’s network card. If you only have Wi-Fi on your device, it doesn’t matter, we’ll flash it via Wi-Fi.

2. Turn on the router. If you are flashing via Wi-fi, then connect to unsecured network DIR-300. If you have already tried setting up your router and cannot connect to wireless network(forgot the password you set on Wi-fi), then reset the settings to factory settings. To do this, hold down the “reset” button for about 10 seconds (until the router blinks all the lights), then wait 30 seconds and feel free to connect to the unsecured Dir-300 network.

3. Open your favorite browser and enter the address of the router web interface 192.168.0.1 into the address bar. If the page does not open, make sure that in the settings network connection(in the properties of the TCP/IP protocol) there are parameters “Obtain IP and DNS automatically”

4. Enter the initial login/password - admin/admin. If the password does not match, check the keyboard layout or reset the router.

Download the D-link Dir-300 firmware from the official website.

Important! U D-Link router Dir-300 has several modifications. If you choose the wrong firmware for your device, this will most likely lead to it being unrepairable at home. Carefully read the information on how to choose the right firmware.

So, every router D-Link Dir-300 there is a sticker at the bottom. It contains, among other things, the information we need. Find the inscription H/W Ver. This line will indicate the Dir-300 version. The following variations may occur: B1, B2, B3, B5, B6, B7, A/C1. With these instructions we can flash any version of Dir-300.

So, we decided on the firmware version. But what about download firmware for D-Link Dir-300? And it's very simple! We go to the official D-Link website using the link ftp://ftp.dlink.ru/. Next, go to the folder pub, Then Router and find our router version in the list. Go to the router folder, then to Firmware and download the firmware in .bin format.

So, we have the firmware, the router is connected - let's move on to updating the firmware.

Firmware for router DIR-300.

We go to the administrative panel of the router at 192.168.0.1. Login/password: admin/admin. Depending on the modification of the router and the firmware version, the interface may differ. Here are some examples of what the DIR-300 web interface might look like.


Picture 1

1. Click on "Advanced Settings".

2. In the “System” item, click the right arrow, then “Software Update”

3. Specify the firmware file you downloaded earlier.

4. Click the "Update" button.

Picture 2

1. Click on “Configure manually”.

4. Specify the firmware file you downloaded earlier.

4. Click the "Update" button.

5. Wait for the firmware to finish

Do you feel like your router is frozen? Read the "Note at the end of the article"

Picture 3

1. Click on Top Menu « Maintenance"("Maintenance")

2. Select “Firmware Update” in the left menu.

3. In the “Update Setting” section, click “Browse” and select the firmware file.

4. Wait for the firmware to finish

Do you feel like your router is frozen? Read the "Note at the end of the article"

As you can see, the process D-Link firmware Dir-300 is extremely similar for all modifications of this router. I think I explained the principle of the firmware quite clearly.

Note on the firmware of the D-Link DIR-300 router.

If it seems to you that the router is stuck in the firmware process because the firmware loading bar moves endlessly or the browser reports that the page is unavailable, this is most likely not the case. It’s just that during the firmware installation the connection between the router and the computer is interrupted and you need to wait a couple of minutes until it is restored or update the page yourself after a while. I hope my article on firmware for the D-Link DIR-300 router helped you.

Despite the fact that the DIR-300 firmware has different a large number of differences from previous versions of this device, users often ask questions about where to download such firmware, as well as how to properly use the updated web interface. However, in fact, it is enough to understand as much as possible simple instructions, and then you can do all the procedures completely independently.

How to download?

It is immediately worth noting the fact that this instruction is relevant only for those routers that have the inscription H/W: D1 on the sticker below. In other cases, other DIR-300 firmware is needed.

Before you start installing the software, you should download the firmware file from the official website. On the site itself, you will need to go to the pub-Router-DIR-300-Firmware folder. You should pay attention to the fact that in this folder there are several directories under the same name, which differ from each other by underscores. If you bought your router in 2015 or made an even later purchase, then you will need to select DIR-300 firmware with the ending “A_D1”.

This folder contains the latest firmware versions intended for the corresponding router. As of January 2015, the latest version is 2.5.11.

Preparation

If you have not yet connected your own router, and have not previously dealt with similar procedures, you should perform a certain set of works before getting the DIR-300:

  • Connect the router cable to the computer. In the vast majority of cases this cable present in the starting configuration of the device. One end of the wire is connected to the computer's network card, while the other is connected to the LAN 1 connector on the router itself. If your computer does not have network port, you should connect this device via Wi-Fi.
  • Connect power to the router. In the event that you are going to flash the DIR-300 router via wireless connection, then in this case through certain time a DIR-300 network should appear that does not have password protection installed, and you will need to connect to it.
  • Launch any browser convenient for you, then address bar dial 192.186.0.1. In case if this page does not open, you should check that in the characteristics of the connection you are using in the “TCP/IP Protocol Properties” section there is a checkmark next to the “Obtain IP and DNS automatically” section.
  • When you are asked for your username and password, you will need to enter admin. It is worth noting that when you first log in, you will most likely be asked to change standard password, and if you still decide to change it, do not forget it, since then the setting will be blocked for you in the DIR-300 router. If the password doesn't work, then you or someone else has already changed it before. IN in this case It is recommended to completely reset the starting characteristics of the router using the Reset button located on the back of the device. After this, the configuration must be carried out again in the DIR-300 router.

If all the above procedures were successful, then you can immediately proceed to the next part.

Firmware

Depending on what this moment The firmware version is present on your device, after logging in you will see one of the interface options. Pay attention to this point.

Gray interface

The gray background of the interface is typical for firmware versions 1.0.11 or 1.0.4, and in this case you should perform the following procedures:

  • Go to the “Advanced Settings” category using the button at the bottom of the screen. If necessary, you should switch the language using the Language button located at the top of the page.
  • In the “System” column, click double arrow to the right, and then select “Software Update”.
  • Select the firmware file you need, which was downloaded earlier from the official website.
  • Click "Update".

Then you will need to wait a certain time before the firmware is installed on your Wi-Fi DIR-300. If it seems to you that everything is completely frozen or the page is in the “Not responding” state, do not be surprised, this point will be discussed in more detail later.

White interface

The white interface is typical for firmware version 2.5.4 or 2.5.11, as well as for subsequent versions. In this case, you will need to do the following work to update:

  • On the left side of the menu, select “System”, and then click on “Software Update”. Do not forget that if necessary or to ensure greater convenience in working with the interface, you can switch its language using the corresponding button at the top of the screen.
  • Go to the “Local Update” section, click on the “Browse” button and look for the firmware file that you previously downloaded.
  • Click the "Update" button.

Your DIR-300 will be updated within a short period of time, Wi-Fi connection will be completed and you will be able to use the Internet.

What to do if everything is frozen?

If, during the process of installing the update, it seemed to you that the device was completely frozen because the progress bar was constantly moving in the browser or it simply displayed that the page was inaccessible, this situation occurs because during the software update process the connection between the computer and the router is completely lost . Thus, you will have to wait for one or two minutes and then connect again. this device and go into settings to see that the firmware has been updated normally.

If you have experience from this manufacturer, you can begin to determine the device parameters on your computer, since the same principles are used in the DIR-300. Instructions for those who do not have experience in such selection of configurations are below.

How is the setup done?

Despite the perceptions of many users, there is actually nothing difficult about setting up a router correctly. To do this, you will need literally 10 minutes of free time and a competent approach to business.

How to connect?

Initially, you need to connect the device to the network itself. To do this you will need to back side of the router, plug the cable from your Internet provider, which was provided to you during the installation process, into the yellow Internet port, and connect one of the LAN connectors to the network card of your computer. It is worth noting the fact that the most convenient is precisely wired setup DIR-300. WRT firmware and other variations, of course, allow you to flash the firmware even in wireless mode via a tablet or phone, but still it is the wired mode that can be called the most convenient among all existing ones. Now connect the router to the outlet, but do not rush to try connecting to the Internet through it from various wireless devices.

If you have some kind of TV set-top box, then in this case you can also connect it to one of the LAN ports, but experts recommend doing this after final settings equipment, since in some situations the set-top box greatly interferes with normal setup.

How to go to settings?

It’s worth noting right away that a fairly common mistake made by modern users is that the network is actively connected during the setup process on the computer, both during setup and after it. You must first completely terminate the current connection if it is running on your laptop or personal computer, and subsequently do not connect it exactly until the setup is completely completed. The router will independently establish a connection and also “distribute” the Internet to all kinds of gadgets.

Now launch a browser and enter 192.168.0.1 in the address bar. You will see a window in which you will be asked for a password and login, and you should enter the word “admin” in both fields. This password and the login is the default in the standard web interface of this router.

What to do if it doesn't work?

If, after entering this data, the system sends you back to the input page, this means that someone tried to change the router settings, and, in particular, changed the standard password, since you are asked to change it at the first login. It happens that you cannot remember it, in which case you will need to reset the device to standard settings. To do this you need to click Reset button, located on the back of the case, and not just press, but hold for 15-20 seconds while the router is connected to the network.

How to setup?

After entering your login and password, you will see the main page of your router’s interface, where all the settings are present, and where we previously updated the DIR-300. At the bottom of the page you will need to click “Advanced settings”, and if necessary, change the initial interface language.

After that, go to the “Network” item and select the WAN section. Now you should see a list of connections, where you will see the only active one, which you need to open. Its parameters should be as follows:

  • connection type - “Dynamic IP + L2TP”;
  • name - may remain standard, but often users prefer to enter something more convenient (this does not in any way affect the functionality of the installed equipment);
  • username - here you will need to enter your individual Internet login (for example, for the Beeline network it usually starts with 0891);
  • password and confirmation - again, the Internet password is entered in order to gain access to the network;
  • VPN server address - check in service center your provider.

Experts recommend leaving all other parameters at default and not trying to change them if you are not a qualified specialist. Now you can click the “Change” button, after which you will be thrown back to the page with full list available connections. After this, you should turn your attention to the indicator located in the upper right part of the screen - you need to click on it and select “Save”, which will allow you to completely save the settings in the router’s memory so that they will not be reset later in the event of a power outage.

If you enter all the relevant information correctly, and there are no active L2TP connections on the computer itself, the next time you refresh the browser page you will find that you have a configured Internet connection and have access to the Internet. Now all that remains is to configure the basic security settings, or more precisely, set some complex password router DIR-300.

It is recommended to set some really complex combination as a password so that no one can connect to your Internet from the outside. You will be able to use random generators passwords or simply create your own combination of numbers and letters.

Hello, dear readers of the inforkomp blog. So, as you understand from the title of the article, today I want to return to the topic again: settings wireless point access. To be more precise, I want to talk about: how to flash a router and why do it. I will show the process of resetting the software using an example. Wi-Fi router Dlink Dir-300. But, if your router model is different from the one shown here, it’s okay, the process itself is the same, except that only the design of the settings window and the name of the menu items will differ.

Why did I decide to write specifically about the router firmware? First of all, the idea of ​​writing an article about router firmware update, but I couldn’t get it together and do it. The second reason is that Lately, many friends began to ask me exactly this question: how to flash a router, what to press and what firmware to use.

As a rule, many users initially try to update it. For example, when purchasing or setting up a new device, I personally check the firmware version and, if possible, update it to latest version. And you know what, my router has probably been working for more than a year now and has never frozen.

I believe that it is necessary to update the firmware on the router. The very meaning of updates is that when developers release new firmware versions, they correct all the shortcomings and errors that could appear when working with the Internet and the router. Moreover, the process of flashing the router itself is very easy.

Therefore, if you have serious problems with Wi-Fi, then be sure to read the article and try to reflash your Wi-Fi router.

Why reflash your router?

Well, there can be a lot of reasons to flash a router. Here are a few of them:

  • 1. The most common reason is updating the firmware for stable and high-quality Wi-Fi work signal;
  • 2. No device receives a Wi-Fi signal;
  • 3. The message that the smartphone and computer is constantly on;
  • 4. The Internet cable inserted into the WAN port is not visible or not detected;
  • 5. Constantly disappears and appears Wi-Fi signal; etc.

In general, there are simply a huge number of types of problems that the router firmware can help you deal with.

Preparation and selection of firmware

IMPORTANT!!!

  • Choose your firmware carefully. Do not make a mistake in determining the hardware version of the device;
  • Disconnect the Internet cable from the router, leaving only the power supply and connection to the computer;
  • You should only flash the router using a network cable, which we connect to any port of the access point (except WAN), and the other side to network card computer. Update router software from using WiFi it is forbidden;
  • All settings, passwords and logins will be reset to factory settings. What, after the update you will have to configure it again;
  • Do not turn off the access point while flashing;

Well, let's start by determining the router revision and download required firmware. In order to find out the hardware version, we need to turn the device over and look at the sticker with technical information. I have this " H/W Ver.: B5" And " F/W Ver.: 1.2.94“Therefore, for those who have the same revision or B6, then download the firmware here: link.

For those who have Dlink dir-300 NRU B7, download the update from this link by selecting the required version. For owners of routers with revision B1, B2, B3, download. If you have a different router, then go here, and in the list that appears, select the device with the appropriate revision. Then, going to the folder " Firmware", which contains the latest firmware version in the form of a "bin" file.

Now, by clicking on the file, we save it to the computer.

Once again, be careful when choosing the firmware version. Because if you try to install the firmware that is required for revisions B1-3 on a router with revisions B5-7, this may cause it to break. And it will be possible to restore its functionality only at a service center by paying a certain amount for it.

Firmware for D-Link Dir 300 router

As always, for any setup, first use the technical data (password, login) indicated on the sticker. If you accidentally forgot your password, then you will need.

The web interface window of our device will open.

To start updating the router firmware, you need to go to the following menu items: “ System» -> « Software Update».

In the firmware update menu, click on the " Choose"We will be required to find the downloaded file and open it. If the name appears next to the selection button, then everything is in order. To start the process, click on “ Update».

All that remains is to wait for the firmware update to finish and reboot the router.

The next time you enter the settings, use the standard password and check current version BY.

Also, do not forget that all settings are abandoned. Therefore, be sure not to forget. Leave comments if you have questions or need help finding the right firmware.

The router firmware is one of the most important moments during its operation. Safety and stability of work largely depend on this computer network. Therefore, in order for your router to make full use of the capabilities built into it by the manufacturer, you need to support it in current state. Next we will look at how this can be done in such a common router model as the D-Link DIR-615.

For a novice user, the firmware update process may seem very complex and difficult to understand. However, in reality this is not the case at all. The D-Link DIR-615 router has two update methods.

Method 1: Remote update

Remotely updating the router firmware is convenient because it requires minimal effort from the user. But in order for it to work, you need to have a configured and functioning Internet connection. In the future you need to do this:

The update itself takes some time, during which the browser may display an error message, or even give the impression that the process has frozen. You should not pay attention to this, but be patient and wait a little. Usually everything takes no more than 4 minutes. After the router reboots, the new settings will take effect.

In the future, you just need to periodically check the relevance of the firmware using the above method.

Method 2: Local update

In cases where the router does not have a configured Internet connection, there is no section in the web interface automatic update Software or the user simply does not want to use the previous method - the D-Link DIR-615 firmware can be updated in manual mode. To do this you should:


In the future, everything will happen in the same way as with a remote update. After the process is completed, the router will reboot with the new firmware.

These are the ways to update the firmware in D-Link router DIR-615. As you can see, there is nothing complicated in this process. However, this does not relieve the user of the need to be careful when selecting the firmware file in the event of a local update. Choosing software designed for a different revision of the router may cause it to malfunction.

The D-Link DIR-615 Wi-Fi router (router page) is very popular among buyers, which means that the instructions for updating the firmware on the D-Link DIR-615 will be popular and relevant. Good router, with an excellent price/quality ratio. To organize your home Wi-Fi networks, this router is just perfect.

After purchasing a router (not only DIR-615), it can be installed outdated version software (firmware). This is not a big deal, but before setting up your router, it is best to update its firmware to a new version. Yes, and if your router is already working long time, then it is possible that more a new version firmware, and it is better to update it. Or, you noticed some problems in the operation of the Internet through the router: frequent network breaks, problems in the operation of certain functions, etc.

As I wrote above, if you just bought a router, then software It's better to install a new one. If the router works, and works well, and you are not very knowledgeable about these matters, then it is better not to touch anything. It works, let it work. But there is nothing scary or difficult about updating software.

Yes, if you don't follow the instructions, you can turn your router into a brick. Also, if you have already configured everything, then after the firmware you will need to re-specify all the parameters. If you are not sure that you can do this, then it is better to leave everything as is.

New firmware may have many improvements and new functions that will have a good effect on the operation of the router. And perhaps new features will appear. There may also be a new design for the control panel.

Download firmware for D-Link DIR-615

First of all, we need to find out the revision (hardware version) our router and download the firmware to your computer.

Find out the hardware version of D-Link DIR-615

Take your device and look at the sticker that is located at the bottom. The model and hardware version should be indicated there. It looks like this:

We are interested in what is written after "Ver.:". In my case, the hardware version of the device K1 (there may also be K2, B, C, U, etc.).

We remember what hardware version we have and go to the server D-Link follow the link http://ftp.dlink.ru/pub/Router/DIR-615/Firmware/. There we select our version. In my case, this is "K".

If necessary, then select another subfolder.

Next, we see the folders are usually there Old folder (it contains old firmware versions), and the beta folder (it may contain firmware that is under development). We don’t need these folders, but we need the file itself, with the extension .bin and something like this: 20140711_1343_DIR_615K1_2.5.4_sdk-master.bin. This file is located next to the folders. If you look closely at the file name, you can see what router it is for, what revision it is for, what version and date.

The file with the firmware we need is on our computer. You can begin the software update process itself.

Updating the firmware on DIR-615

Need to know:

1. Make sure that the firmware you download is exactly suitable for your router model. Pay attention to the device revision (I wrote about this above).

2. Software can only be updated by network cable. When connected via Wi-Fi, this is not possible.

3. Do not turn off the router while flashing. Be careful not to touch the power cord or network cable.

Another funny thing is that DIR-615 has about 4 different panels management. I mean, they look different. And write universal instructions very difficult compared to . The settings there are the same on all devices. I will try to show by example the most popular control panels.

Connect the router to the computer via a network cable (LAN)

We take our router and connect it to a computer (or laptop) via a network cable. A small cable should be included with the router. If this computer was previously connected via Wi-Fi, be sure to turn off the wireless connection. Make sure that the router is connected to the computer only via a network cable.

Open any browser and type the address in the address bar 192.168.0.1 . Let's go through it. You will be asked for a login and password to access the settings. If you have already changed them, then indicate those that you installed. If you haven’t changed it, then enter the standard ones - admin And admin.

Here we are in the control panel of our router. Now, we just need to upload the firmware. If your settings appear dark (such as in the screenshot below), then click on the button Advanced settings, then on the tab System click on the button right and select Software Update.

If the settings are light, then home page select item Configure manually and then go to the tab System And Software Update.

Click on the button Review... and on your computer select the firmware file. Click on the button Update.

Or like this:

The file is selected and the firmware update process is started. The update status will appear, do not touch anything. We wait until the router reboots. If something freezes, it's okay. Wait 4 minutes and refresh the page in your browser. You must see new panel controls and a request to change the password to access the settings. You can come up with your own username and password (just write them down so you don’t forget), or specify the same standard admin and admin.

After changing these data, you can use them to go into the router settings and configure it.

Automatic firmware update via Internet on D-Link

If your router is already configured for Internet, then you can update the firmware much easier. There is no need to search for and download the firmware file to your computer, the router will do everything itself.

Attention. If you do not find the option to automatically update the software in your router’s settings, or your control panel differs from the one in the screenshots below, then first update the software to the latest version using the method I described above.

After entering the settings of the D-Link router, you can immediately see a message stating that there is a new firmware version.

A warning message will appear and the firmware update process will begin. During the process, a window may appear asking you to enter a password twice to enter the router settings. Come up with it and indicate it.

After updating the firmware, the control panel may change (how I don’t like this). For example, after updating my D-link DIR-615/A to version 2.5.20, everything looks like this:

In the new version, updating the firmware on D-Link is done like this:

Well, why not make one version of the control panel and simply improve it. It would also be much easier for ordinary users. And there's a lot different instructions, and the control panels do not match anywhere.

That's it, the sewing of our DIR-615 has been successfully completed. It has the latest version of the software installed.


2024 gtavrl.ru.