A program for recording voices under minus. Online services for recording
For creating voice recording you need to connect and configure the microphone, install additional software or use the built-in Windows utility. Once the equipment is connected and configured, you can proceed directly to recording. This can be done in different ways.
Method 1: Audacity
The program is suitable for recording and simple post-processing of audio files. Fully translated into Russian and allows you to apply effects and add plugins.
- Launch the program and select from the drop-down list required driver, microphone, channels (mono, stereo), playback device.
- Press the key R on the keyboard or "Record" in the toolbar to start creating a track. The process will be displayed at the bottom of the screen.
- To create multiple tracks, click on the menu "Tracks" and select "Create new". It will appear below the existing one.
- Click the button "Solo" to save the microphone signal to the specified track only. If necessary, adjust the channel volume (right, left).
- If the output voice is too quiet or loud, use amplification. To do this, move the slider to the desired position (by default, the slider is in the center).
- To listen to the result, click "Space" on the keyboard or click on the icon "Lose".
- To save audio click "File" - "Export" and select the desired format. Specify the location on your computer where the file will be sent, the name, Extra options(bit rate mode, quality) and press "Save".
- If you made several takes on different tracks, then after export they will be automatically merged. Therefore, do not forget to delete unnecessary tracks. It is recommended to save the result in MP3 or WAV format.
Method 2: Free Audio Recorder
Automatically detects all signal input and output devices connected to the computer. Is different minimum quantity settings and can be used as a replacement for a voice recorder.
How to record audio from a microphone using Free Audio Recorder:
Free Audio Recorder can be used as a replacement for standard utility"Sound recording". The program does not support the Russian language, but thanks to intuitive clear interface can be used by all users.
Method 3: Sound recording
The utility is suitable for cases when you urgently need to record a voice. It launches quickly and does not allow you to configure additional parameters or select audio input/output devices. To record via Windows Voice Recorder, follow these steps:
The program allows you to save finished audio only in WMA format. The result can be reproduced via Windows player Media or any other, send to friends.
If your sound card supports ASIO, download latest version ASIO4All drivers. It is available for free download from the official website.
The listed programs are suitable for recording voice and other signals using a microphone. Audacity allows you to perform post-editing, trim finished tracks, and apply effects, so it can be considered semi-professional software for sound recording. To perform a simple recording without editing, you can use other options suggested in the article.
If you have a microphone or camera with a microphone, then why not try recording your voice.
There are three ways to do this:
- Use the software bundled with your Windows. A very inconvenient option. Apart from noise and wheezing, I was unable to really record anything. Although my microphone is very high quality. And I closed the room and there were no extraneous noises or sounds.
- Use the program that comes with a microphone or camera. This option is already better. But there are very few settings, just like in the first case. And the recording quality again leaves much to be desired.
- Or install special program for recording sound and voice. The best option: the recording quality is excellent and there are additional settings. In addition, you can then process the recorded content a little: remove noise, increase or decrease the volume, and so on.
I'm all for the latter option. Conventionally, all special software for sound recording can be divided into the following groups:
- free. Very simple, and the recording quality is normal, but most often they do not have additional settings. And sometimes they don’t work stably. But still suitable for a novice user. And they basically only have one function: recording. And in the end, you will then have to use other software, for example, in order to clean or somehow process the sound. This includes programs such as UV SoundRecorder.
- Paid programs for recording voice and sound. Excellent programs, with good quality recordings and a large range of settings. But they are more suitable for professionals who make music or audio recordings. Of course, their recording quality is much better, and their range of processing tools is also wider than that of the first group, but many are worth good money. These are such as AV Voice Changer Diamond, Total Recorder and GoldWave.
If you just need to record your voice or some sound from a microphone, and perfect quality is not important to you, then choose the first option accordingly. Well, if it’s important to you as well high quality and the possibility of additional processing of what you wrote down, then the second group will be suitable for you.
(just click on its name to go to the analysis and then download it):
It is valued for its ease of use; for the possibility of overlay various effects to a recorded voice or sound; because it makes it easy to create ringtones for your phone. It is valued for its free, simple and reliable operation; for being able to remove sound from online toys; for being loud and high quality sound; for the ability to convert to mp3; for the fact that it works perfectly and without unnecessary bells and whistles. It is valued for being one of the best of its kind; for improving sound quality; for excellent opportunities; because everything with it is quite simple and functional. She is appreciated because she has all the settings; for simplicity and ease of use; for normal voice recording; for being able to extract soundtracks from films. |
IN Lately Microphone recording is becoming increasingly popular among audio enthusiasts. Contrary to popular belief that it is impossible to make a decent recording at home without expensive equipment, this is not true. There are a number of Russian-language programs that provide the opportunity convenient recording voices and musical instruments. For example, this is the audio editor AudioMASTER from AMS Software.
This article will discuss how to record sound from a microphone at home quickly and efficiently. Some simple steps will help you master AudioMASTER on your own.
STEP 1. INSTALLING THE PROGRAM
To begin with, you need “AudioMASTER” - your main working tool. The size of the distribution is 50 MB, which is quite acceptable with a good Internet connection speed. After you have downloaded installation file, open it double click mice. Use the instructions provided Installation Wizard, and proceed to the next step.
STEP 2. RECORD SOUND
Recording audio from a microphone is not difficult at all. To do this, in the main program window, select “Record audio from microphone”. In the dialog that appears, select the recording device and click "Begin new entry» . The recording process starts in exactly 3 seconds, so prepare for it in advance. If something goes wrong, you can always press pause or cancel. As soon as the right sound or your voice has been recorded, click "Save".
STEP 3. EDITING THE FILE
The audio file you recorded will open in the program itself. Now you can listen to it, edit it and also. If processing or correction is necessary, use one or more functions.
Invert. If when playing a file you hear extraneous noise, which were not present during recording, this may be due to equipment malfunctions. In this regard, it is advisable to use the inversion function - changing the phase of the audio signal. To do this, in the action bar, select "Invert", and then - "Apply".
Equalizer settings. An equalizer is needed to improve the sound quality of an audio recording by adjusting the frequencies. Click on the button "Equalizer" located in the action bar. Check out the ready-made settings and decide which one you need. If a musical instrument is recorded poorly, we recommend that you use the command "Noise Reduction". By lowering the level of a certain frequency in this preset, you can easily eliminate sound defects. To make speech more intelligible, select a setting "Intelligible Speech". You can save changes using the button "Apply".
Voice change. The essence of this function is to create original effect. If you want to experiment with the sound of your own voice in a recorded audio track, in the action bar, click "Change Voice". From the number available settings select the one you need. In addition, you can change the tempo, echo volume, etc. Changes made can be previewed using the button "Listen", and then apply - using the button "Apply".
STEP 4. SAVING THE RECORDING
The program allows you to save audio recordings in MP3, WAV, WMA, etc. format. Click File > Save As in the main menu and you will see a list of available extensions. If necessary, you can read information about any of them - just click once. Now click "Save". You also have a great opportunity to save an audio file as a ringtone for mobile device. To do this, you must select from the main menu File > Save as Ringtone. Next, enter the trimming time the desired fragment and click "Save".
Compatibility
The program supports:
Windows 7, XP, Vista, 8, 8.1, 10
Sound recording is the domain of not only professional sound engineers, but also ordinary users who often need to record their voices for various purposes. This could be a Skype conversation or a vocal part of an audio track. In both cases, you will need a special one.
Most the best option in the price/quality ratio is the audio editor “AudioMASTER” from AMS Software, the main functions of which we will now consider.
A significant advantage of the program is its clarity - thanks to the nice and intuitive interface, you won’t have to search for long the desired button. If you need record voice or a musical instrument to a microphone, you can easily find this option in the main editor window. The created file will be available for listening and editing immediately after you stop recording. It is proposed to save it in one of the following formats: MP3, WAV, WMA, OGG, FLAC, etc. Each format has its own brief description.
Among the processing effects, we highlight sound atmospheres, voice change, echo overlay and equalizer. Users have dozens of ready-made settings to enrich the sound and eliminate various noises.
Atmospheres– perhaps the most interesting effect of all of the above. Using this unique function, you can add a thematic sound to an audio recording, be it the crunch of steps in the snow, the sound of the sea surf or the singing of birds in the forest. You have the right to add absolutely any number of similar sounds.
For those who like to experiment with the timbre of their own or someone else’s voice, the program provides special opportunity voice changes on Pinocchio, monster, mutant, robot or alien.
If you go to the appropriate tab, you can overlay it on a song echo and thus create the effect of a specific place in space (forest, mountains, well, cathedral).
The built-in equalizer. To achieve the result, you will only need to move the frequency sliders available in each preset. For example, working with the “intelligible speech” preset will allow you to understand the words in the track. By varying the settings, you can highlight or mute a certain instrument, increase the bass volume, etc.
The functionality of AudioMASTER, of course, does not end there. Those who have an iPhone will have a chance to download it to their device. If desired, you can also splice or mix music tracks, extract music from videos, and capture audio from CDs. Getting more familiar with the program will give you the opportunity to fully appreciate its potential.
In general, “AudioMASTER” fully lives up to its name. This utility may well become your universal assistant not only for recording sound, but also for its complex processing. Whatever your initial skills and abilities, you can master this product in less than half an hour!
Compatibility
The program supports:
Windows 7, XP, Vista, 8, 8.1, 10
Recording sound from a microphone is a simple matter. In addition, a great many programs have been written that can record audio. Such software may be very different from its competitors, but at the same time, it copes with its tasks quite well.
Let's look at the most “capable” representatives of audio recording software.
Small but quite powerful utility, “tailored” for recording audio in MP3 format. It is for this format that the program provides a large number of settings.
Free Audio Recorder
Another program for recording sound from a computer. Unlike Free MP3 Sound Recorder keeps a record (logging) of all actions performed by the user. Logs can be used to diagnose and correct errors.
Free Sound Recorder
Kat MP3 Recorder
Quite an old, but quite functional program. It copes with its tasks perfectly.
It can record audio in rare formats, and the scheduler has a built-in function for recording audio using a link from the Internet.
UV Sound Recorder
A very easy to use program for recording audio with sound card. For all its simplicity, it can record sound from several devices at once in different files, and also convert audio to MP3 format on the fly.
Sound Forge
Powerful paid program. In addition to recording sound, it allows you to edit audio. The editor is professional, with many functions.
NanoStudio
NanoStudio is a free software for creating music with a large set of built-in tools.
Audacity
The program is very similar in functionality to Sound Forge, with one small difference - it is completely free. For free Audacity programs has surprisingly powerful functionality.
These are the representatives of audio recording software. Some can only write audio, some can also edit, some are paid, others are free. It's up to you to choose.