Problems with ping on Windows 10. How to reduce ping in games - the most effective ways

Useful tips

Every modern child who lives by playing video games, and adults too, has probably repeatedly encountered the concept of “ping”. It is also an integral part of the computer networks established by the master. Next, we’ll look in more detail at what this concept means and how to reduce ping in order to optimize gameplay or network performance.

What is ping and how to check it

Ping is the time period during which one information packet is transmitted from the client to the server and returned. Associating this process with real life, we can say that ping is like the time spent moving from home to the store and on the way back. The store is the server, and the person is the client. The unit of measurement is millisecond (ms).

To determine the Windows OS ping, simply enter the command line by entering the cmd command in the “Run” menu, which is called by the “WIN” + “R” key combination, or the search bar of the “Start” menu.

Then, you need to enter the “ping” command and, separated by a space, indicate the address of the remote machine/site to which the connection will be checked.

As you can see in the screenshot, the basic information allows you to see the average value and determine if there are sharp changes in it due to a poor connection.

How to reduce ping - current methods

There are a number of basic actions during which the user may have the idea that they should reduce the ping value regarding the connection to a particular server/site. Of course, this is necessary when it comes to playing online video games, where it greatly influences how the player's battle turns out. This may also be required when setting up an integral computer network, where you simply cannot do without a high-quality connection.

If it is excessively high or constantly “jumps” relative to any direction of the client connection to the server, then the problem may be the following:

Poor internet connection. It is corrected as follows: the method of connecting to the network is changed (the modem is changed to a direct cable connection or another), the provider is changed, if the low-quality connection is its defect, the tariff is updated to increase the bandwidth allocated to the channel client.
Outdated network card driver. Everything is quite simple - you need to update it by downloading the necessary files from the manufacturer’s website or any other thematic resource.
Viruses, startup list, loaders. All of the above can have a negative impact on the speed of the network. Naturally, the system needs to be cleaned of viruses, the startup list must be adjusted, leaving only what is necessary, and bootloaders must be disabled during the game or any other actions related to connecting to a specific server. The latter especially applies to torrent clients, which, when downloading, can “clog” the entire Internet channel allocated to the user.

You can also make certain changes to the system registry, but you should do this with caution, remembering that the consequences of actions performed with the registry are sometimes quite difficult to correct.

Having launched the registry with the “regedit” command, entered in the same paragraphs as for the command line, you must do the following:

Non-existing parameters can be created, but, again, we remind you that it is better to entrust such changes to a specialist who feels confident when setting up system registry configurations. All these actions will help reduce, but be careful.

How to reduce ping on a modem

People who use 3G modems to connect to the Internet are a separate category of users. The problem with working with such equipment is that they pick up signals from mobile towers of various operators, but this signal itself can be blocked by anything. All actions to improve the performance of a 3G modem and reduce ping require increasing the power of the device itself.

Experienced players and specialists working with such devices recommend the following methods of signal amplification:

Each of these actions will positively affect the speed of the Internet and significantly reduce the ping. You can check the connection level through the MDMA (Mobile Data Monitoring Application) application, which, after downloading and launching, will detect the connected modem (maybe not the first time), and then display the signal quality value in dbm units. Dynamic reading of information in real time with a delay of 5-30 seconds will allow you to determine the best place to place the modem.

How to reduce ping in games

Finally, we have come to the most important stage, since the decrease in online games worries users the most, because a poor Internet connection and other defects affect their success during battles. Let's look at making the necessary settings using the example of two very popular games: World Of Tanks and Counter-Strike: Global Offensive.

How to reduce ping in CS GO

When playing CS GO, you can change the ping using all the means described above, as well as by intelligently making changes to the launch parameters. To do this, you need to enter the game library of the STEAM platform and select CS GO from it. Further steps are shown in the screenshot.

In the window that opens, click “Set launch parameters” and enter the values shown in the screenshot in the line that appears.

Also, to start the competitive mode, it is recommended that the player set the game to the optimal ping so that it does not select servers for him that exceed a certain level, if this is, of course, possible. To do this, in the “Settings” – “Game Options” menu, you need to set the slider to the minimum value.

How to reduce ping in World Of Tanks

The peculiarity of World Of Tanks is that the game is played on a large number of servers, each of which is located regionally in different places. Below is the geographical location of the main servers from the Russian cluster of the game.

You can control it by installing a special game modification or software, such as WOT Pinger.

Using this software, you can track the most optimal servers for the game and use them exclusively.

Thus, we can conclude that ping has a significant impact on the performance of certain servers/sites. To reduce it, you can use any of the methods suggested above. You can also contact specialists who will make the necessary adjustments to the system and specific applications, significantly speeding up the operation of your computer/laptop. It is recommended to order the same setting from the provider, where the user can be advised which high-speed Internet access tariff will be much more profitable for him.

Hello everyone, today a small note on how to allow pings in the firewall via the command line, it may be useful if you have installed the core version of Windows or Hyper-V server 2012R2. And for those people who like to automate everything in their environments, it is suitable for writing bat or cmd files that can be used when installing and configuring the server adopted in your organization. I will also teach you how to open a firewall through a cmd shell, this knowledge has helped me out many times, since there are situations when the mouse on the server does not work, and it is very necessary to open the treasured equipment, since an important service may lie due to a closed port .

Setting up a firewall from the command line

Let's assume that you have a server on which the Windows Server 2012 R2 operating system is installed on the server, according to the standard you should have ping packets open, it is clear that such things can be done by group policy and this is correct, but in my example there is a small branch (branch) and in it you need to open ports on three servers, sending such a file with a command to the manager there, special efforts and knowledge will not be required to complete the task and setting up a firewall using the command line will be very appropriate.

Open the command line and write the following text in it:

netsh advfirewall firewall add rule name="ICMP Allow incoming V4 echo request" protocol=icmpv4:8,any dir=in action=allow

As you can see, the rule worked fine, now the required ports should be open in our firewall. Let's check if the rule has been added.

How to start a firewall from the command line

To start the firewall from the command line, enter the following text in it:

and in the incoming rules we see ours, which opens ICMP packets.

Hi all! If you are a regular reader of this blog, then remember that we recently discussed the topic of creating and configuring a local network. But they completely undeservedly kept silent about very important points.

For example, they didn’t cover the topic of what the PING command is in the Windows 10 command line. So, what kind of animal is this and what do you eat it with? In fact, this utility is simply irreplaceable when diagnosing network problems.

So, the essence of PING is to poll a specified node on the network. For example, we need to understand whether a certain computer is responding to requests. To do this, you just need to know its IP address.

In our case it will be as follows: 192.168.1.150. Well, let's ping him. Right-click on “Start” and in the menu that opens, select “Command Prompt (Administrator)”:

After this, the system will ask you to once again confirm the seriousness of your intentions. Select "Yes", then enter the command itself in the command line:

Remember that in our case it will look like this:

Naturally, instead of the IP address indicated above, in each specific case you need to substitute your own. And now we look, if the node responded and packet loss is zero, then everything is fine, the network is working.

And this is what the situation will look like when the desired computer for some reason does not respond to requests:

As you can see, the request timed out and the specified node is unavailable. This means that this is a problem, something is wrong with our network, we need to do it again.

It is also important to understand that this method can diagnose not only a PC, but also any devices with a network card. These can be Smart TVs or satellite tuners.

You can also enter an alphabetic one instead of a numeric IP address. Look, now we will test the accessibility of this blog on the Internet:

Phew, thank God everything is fine! For those who are especially experienced, it should be noted that the PING command has many additional parameters. Here they are:

Let's look at what this might look like in practice. In fact, everything is very simple. For a live example, let's reduce the number of requests sent from 4 to 2. Here we will need the "-n" operator from the list above:

In general, now you can see for yourself, dear readers, that the PING command in the Windows 10 command line is not at all difficult. Therefore, use it to your health and remember the author of the blog with good words.

Let's wrap this up. If you have any questions or unclear points, knock on the comments to the article. By the way, another cool utility will be discussed, don’t miss it. In the meantime, let's watch an interesting video about your age.

To check the connection on the network, a special system command ping is used, which sends an ICMP protocol request to a resource with a specific address on the network and displays the result received in response from this device.

That is, the ping command helps to identify the period of time required to transfer certain data from one device to another.

The lower the latency, the faster the connection between two nodes.

What is ping

Ping is the length of time during which a packet sent from one network device will be delivered to another device on the network and returned back.

The higher the ping, the longer, for example, the waiting time required to open an Internet page.

There is one more concept in relation to Ping, bordering on the first one. Ping is also the most popular command for determining the access speed of certain network devices. It can be used as the main means of determining the return period of packets along the route of interest.

Ping should be used with any Internet node, including to monitor the quality of the connection to terminal equipment. At the same time, ping allows you to quickly determine the presence or absence of problems with the connection at the physical (break, cable damage, network card failure, etc.) and software (for example, blocking of all network traffic) levels.

Pinging involves sending a number of data packets from one device to another device, both on a local network and on the Internet. Thanks to this exchange of packets, it is possible to obtain information on the quality of the connection.

If there are no responses received from the device being tested, it means there are connection problems. Packets that do not come back are called “losses”. The greater the number of lost packets, the worse it is. If all sent packets are lost, this means either there is no network connection or the pinged device is unavailable.

The ping speed is very important: the lower it is, the faster and more reliable the connection between nodes.

Video: checking ping

Verification methods

To check the connection using ping, you can either run the ping command from the operating system console, or use specialized online services.

Via command line

To check ping via cmd you need to do the following sequence of actions:

Open the command line in one of three ways:

Online

An alternative option for checking ping to an online server is to use online services. These Internet services allow you to check the availability of an information resource and user waiting time.

Let's look at the most common of them:

How to check ping to a router

The fastest and easiest way on Windows to check ping to your router is to use the Ping command. To do this, you first need to find out its IP address. It is usually applied to the back of the router body. Most often the router has the following IP address 192.168.1.1.

In the command line, type the command: ping 192.168.1.1 -t.

If the router has an IP address of 192.168.0.1 (as is the case with D-Link routers), then the command should be: ping 192.168.0.1 –t.

The -t parameter means that pings will be sent until the user interrupts the process by pressing the keyboard shortcut “Ctrl” + “C”, or closes the console window. A successful ping result is shown in the figure:

This result indicates that the IP address is accessible and responses to ICMP requests are being received. If the router pings, therefore, we can talk about its accessibility from the workstation. In such a situation, you can connect to the router settings through its web interface.

If the router's IP address is unavailable and there is no response from the device, then the result of the ping command is as follows:

Photo: result of executing the ping command

In such a situation, you need to check what IP address is set in the network card settings, try changing the port in the router and, as a last resort, reset the router settings to factory settings.

Usually we talk about ping when the time between operations on a local network or the Internet increases, or when there is no response from the recipient. For example, quite often you need to check your ping in relation to search engines. Comfort during online games often depends on ping.

It is wise to check the ping to the game server before playing. Of course, the lower the ping, the more comfortable the network experience.

The ping command sends data packets to a specific IP address on the network and then lets you know how long it took for that data to be sent and a response to be received. This is a handy tool that you can use to quickly test various points on your network. Here's how to use it.

How Ping works

Ping comes from a term used in sonar technology, which sends out pulses of sound and then listens for the echo to return. In computer networking, the ping tool is built into most operating systems, which work in much the same way. You issue the ping command along with a specific URL or IP address. Your computer sends several packets of information to this and then waits for a response. When it receives a response, the ping tool shows you how long each packet took to make that journey, or tells you that there was no response.

It sounds simple, and it is. You can check whether your computer can connect to another device—for example, your router—on your local network or to a device on the Internet. This can help you determine if there is a network problem somewhere on your local network or somewhere else. The time it takes for packets to return can help you identify a slow connection or if you are experiencing packet loss.

And it doesn't matter what operating system you use. Pull up a terminal or command prompt window and you can use ping for MacOS, Linux or any version of Windows.

How to use Ping

We're going to use the Windows Command Prompt in our example here. But you can also use the ping command in Windows PowerShell or the Terminal application on macOS or any Linux distribution. Once you get to the actual command, it works the same everywhere.

On Windows, press Windows + R. In the Run window, type "cmd" in the search box and press Enter.

At the command prompt, type "ping" along with the URL or IP address you want to check and press "Enter".

This response shows the URL you are viewing, the IP address associated with that URL, and the size of the packets being sent on the first line. The next four lines show the responses from each individual packet, including the time (in milliseconds) it takes to respond and the packet's time to live (TTL), which is the amount of time that must pass before the packet is discarded.

At the bottom you will see a summary that shows how many packets were sent and received, as well as the minimum, maximum and average response time.

And in the following picture, we are pinging a router on our local network using its IP address. We also get a normal response from him.

When the ping tool does not receive a response from any devices you pinged, it also lets you know about it.

And here's how to use ping at the most basic level. Of course, like most commands, there are a few additional options you can use to make it behave differently. For example, you can make it track a destination until you stop the command, specify how many times you want it to ping, set how often it should ping, and much more. But, unless you are performing some specific types of troubleshooting, you don't need to worry about these advanced options.

If you're interested, just type "ping /?" On the command line to see a list of options.

What You Can Do with Ping

Now that you know how to use this command, here are some cool things you can do with it:

Ping a URL (eg website) or IP address to see if you can reach the internet destination. If you receive a successful response, you know that all network devices between you and that recipient are working, including the network adapter on your computer, your router, and any devices on the Internet between your router and the destination. And if you are interested in exploring these routes further, you can use another networking tool called tracert to do so.
Ping a URL to see its IP address. If you want to know the IP address for a specific URL, you can submit the URL. The ping tool shows you at the top the IP address it is working with.
Ping your router to see if you can reach it. If you cannot successfully ping an Internet address, you can try to ping a connection to your router. A successful response lets you know that your local network is working normally and the problem with accessing the Internet site is somewhere outside of your control.
Ping your loopback address (127.0.0.1). If you can't successfully ping your router, but your router appears to be up and running, you can try ping a so-called loopback address. This address is always 127.0.0.1, and testing it successfully lets you know that the network adapter on your computer (and the networking software in your OS) is working correctly.

Note: You can't get a ping response from other computers on your local network because the built-in firewalls on those devices prevent them from responding to ping requests. If you want to be able to ping these devices, you will need to disable this setting to allow passage through the firewall.

The list above uses an external approach, where you first send a request to the most distant destination and then work your way to more local devices. Some people like to work the other way around, ping the loopback address first, then the router (or other local device), and then the internet address.

And of course, what we talk about in this article mainly relates to using ping to troubleshoot a home or small business network. Additionally, if you are tasked with troubleshooting large networks, you probably already know how to use ping and many other network tools.