Note: antivirus installed on the system. Disabling antivirus software

Twitter

Surely many users, while working on Windows 7, have encountered a situation where the antivirus installed on their computer blocked some user actions. In this case, temporarily disabling or uninstalling the security software may help resolve the problem. However, not all users, even those with good knowledge of Windows 7, know how to implement this. It is for these people that our article today is intended, in which we will talk about the most common situations in which it may be necessary to neutralize antivirus software, as well as methods for disabling it temporarily or completely.

In what situations is it necessary to disable the antivirus?

Before we talk about methods for disabling the antivirus in the Windows 7 operating system, it is necessary to consider the main situations that require this action. It is very important to have an idea about this, because by disabling your antivirus program, you leave your PC unprotected for some time.

One of the most common reasons for disabling antivirus software is the use of pirated utilities that use special crack.exe files, KeyGen.exe key generators or files like Patch.exe, which are responsible for cracking the standard license. The thing is that because of these files, the antivirus recognizes pirated programs as unwanted or posing a potential threat. However, in fact, pirated programs do not cause any harm to the computer, but installing and using them may require disabling the antivirus.

In addition, a similar situation arises when downloading files from popular Internet resources such as DepositeFiles, Letitbit, Rapidshare, Turbobit and some others.
Also, disabling antivirus software may be necessary when working with resource-intensive programs or games on computers with low technical specifications. The thing is that for stable operation, the antivirus requires significant processor and RAM resources, which creates a large load on the computer’s hardware.

In addition, some antivirus programs may conflict with the security measures integrated into the operating system, namely the firewall. In this case, completely disabling the antivirus or removing it will help solve the problem.

Temporarily deactivate antivirus software

Regardless of what antivirus you use on your computer, the process of disabling it on Windows 7 is absolutely identical. This can be done by right-clicking on the antivirus program icon located in the tray near the system time on the Start menu bar. After the context menu appears, select the “Temporarily disable protection” item. The deactivation time depends on the antivirus used. Some programs allow you to specify the period for which you want to pause the utility.

This method of disabling antivirus on Windows 7 works on all modern antivirus programs, however, it is suitable for suspending work for a short period of time.

Complete deactivation of antivirus software

To completely stop the operation of security software for an indefinite period of time, there is another method. To do this, go to the “Start” menu item and select the “Control Panel” line. Next, go to the “Administration” section and uncheck all the boxes next to the antivirus line in the “Configuration Settings” and “Startup” sections.

When all the boxes are unchecked. Click on the “Ok” button, confirm saving the changes made and wait until Windows 7 reboots the system. After this, the antivirus software will be disabled.

You can also disable the antivirus through the “Task Manager”. To call it, you need to use the key combination Alt+Ctrl+Delete, and then select the line “Start task manager”. Next, go to the “Processes” tab, find the installed antivirus in the list, click on the “Stop” button and confirm your intention to disable the antivirus

How to stop the Windows 7 firewall?

The Windows family operating system from Microsoft comes without integrated anti-virus software, and the protective functions are performed by standard protection tools, which include a firewall, also called a firewall.

To disable the Windows Firewall, you need to open the main Start menu, select the Control Panel section, go to the System and Security menu item and go to the Windows Firewall settings section. To completely stop the operation of this service, you must click on the line “Turn the firewall on or off” located on the left side of the screen, check the box next to the deactivation line and confirm the changes being made.
To ensure that anti-virus software does not conflict with the firewall during operation, it is necessary to add it to the exclusion list. To do this, go to the system settings section “Allow a program or component to run through Windows Firewall” and check the box next to your antivirus.

Uninstalling an antivirus

If disabling the antivirus did not help or you decide to install another utility of this class, then you will need to uninstall the program. However, the main problem is that it is impossible to remove the antivirus using standard methods. To completely remove anti-virus software from your computer, you must boot the operating system in safe mode or first install a special utility designed specifically for these purposes. However, most modern antivirus programs can be uninstalled without using such utilities.

Adobe Flash Player is a free, widely used media player for viewing Flash files (SWF files).

Flash has been an indispensable tool for creating presentations, games, websites, animated films and other add-ons that require rich multimedia content for quite a long period of time.

As a rule, browsers install the Flash player automatically; it is recommended to update the program regularly, since Adobe is constantly improving its development.

If, when opening any sites, video is not displayed and it is impossible to listen to audio files, then most likely you do not have Adobe Flash Player installed (or an outdated version of it is installed). Therefore, you need to download and install the latest version of this program. It would seem that there is nothing complicated about this, but it turns out that many users have problems installing a flash player.

How to install Adobe Flash Player correctly will be discussed in this article.

H To install Flash Player, follow these steps:

1 . Make sure your computer meets the system requirements for Flash Player

2. Before installing the flash player, you need update your browser to the latest version , otherwise, the Adobe Flash Player you downloaded will not install.

In the Opera browser, for example, this is done like this: Move the mouse over the browser menu located in the upper left corner, click once with the right mouse, select from the drop-down menu Reference->Check for updates. If there are updates, they are installed, if not, then your browser version is the latest.

For Mozilla Firefox browser You can check for updates like this: Help → About Firefox → Check for updates

3. Download the latest version of Flash Player

The most important! You only need to download Adobe Flash Player on the official Adobe website: http://www.adobe.com

In the lower section "Download"

press "Adobe Flash Player":

If for some reason you see another page of the Adobe.com website, then in the “footer” of any page there are links to download a flash player:

If Adobe Flash Player was already installed on your computer, you need to check that you have the latest available version of Flash Player installed on this page adobe.com

The following window displays the installed version of Flash Player and your operating system:

For those who are not familiar with English:

If Flash Player is not installed, you will receive an error message.

Note: It is possible that the version number in the picture is different from the version you installed. At the momentlatest version of Flash Player for Windows, 11.3.300.265:

In order for Flash content to be displayed correctly, you need to update the Flash player to the latest version. To do this, it is best to delete the previous one.

So, in order to download the flash player, use the direct link of Adobe Flash Player and you will be taken to the Russian-language download page.

Check that the downloaded file matches the type of your operating system and browser

Note: You will be prompted to install the Google Chrome browser or McAfee Security Scan Plus scanner in parallel:

If you do not need the proposed application, then uncheck the box. "Include in download":

4. Install Adobe Flash Player according to your browser type

For Mozilla Firefox browser

Click on the button Download on the download page of the Russian-language site (see link above) - on the official site it’s this button:

1. When the file open dialog box is displayed click the button Save File:

for a suggestion where exactly you can choose the Desktop:

Here is our downloaded original Adobe Flash Player, on the desktop:

To start installation double click on the Flash Player icon.

2. If you downloaded the install Adobe Flash Player installation file without a save prompt, then in the “Downloads” window d Double-click the file name:

3. When a security warning appears , press the button Run:

or Yes :

Note: Please note the publisher before agreeing to installation

Before you run it, you need to close all browser windows, for its successful integration.

If this is not done, the installation will pause with the error:

If this window appears, close Firefox. The installer runs automatically after Mozilla Firefox is closed.:

By default, the automatic update option is selected ( P When you select this option, the flash player is updated without your intervention when a new version is released). Adobe recommends using this option to update Flash Player.

But you can choose others:

Click the button Ready. That's it: Adobe Flash Player is installed on your computer.

Sometimes Adobe Flash Player installed as a browser add-on Mozilla Firefox. In this case, appears at the top of the browser warning "Firefox is warning you that this site (get.adobe.com) is asking you to install software on your computer"

Note: If you are using Internet Explorer 9 you must disable ActiveX filtering :

In Internet Explorer, select Tools>Security. If ActiveX filtering is checked, uncheck it:

Quit Internet Explorer, and then restart it.

After pressing the button Start installation(or Download) sometimes an information window pops up - we get rid of it by checking the box and clicking on "Close":

or “Run”

or yes"

We agree with terms of the license agreement and click "Install".
When the following window appears, close Internet Explorer.

The installer runs automatically after you close Internet Explorer.

After successful installation, select the update method. Click the button "Ready".

For Google Chrome browser

E If you are using Chrome then Adobe Flash Player does not need to be installed. because He built into Chrome and enabled by default (updates automatically when new versions of Flash Player are available.)

To make sure you have the latest version of Chrome, select Chrome> About Google Chrome.

In the message "Google Chrome has been updated to..." you see the latest updated version of Chrome. If Chrome is not the latest version, click the button"Update Now"

Note: The integrated Google Chrome flash plugin cannot be removed . You can only enable or disable the integrated plugin.

5. Make sure installation is complete

And below you will see the version of your Flash Player and your operating system.

PS. For any reason, if the installation fails, Adobe Flash Player must be removed from your computer:

Then restart your computer and re-download and install Adobe Flash Player
Based on materials from helpx.adobe.com, remontcompa.ru, www.dmosk.ru

Well, that seems to be all. Somehow the article turned out to be voluminous.
But, in principle, downloading and installing Adobe Flash Player is not difficult, the main thing is to do everything slowly, consistently and correctly.

Before downloading some programs from the Internet, in order to ensure that the programs download correctly, you may be prompted to disable your installed antivirus software. If you intend to download software from the Internet, then you should read the installation instructions to see if you need to disable protection from viruses. If this step must be completed before downloading, you will need to follow these steps to disable anti-virus protection in order to install the software correctly. Once you download the program, you will need to do a few things to ensure that your computer remains safe and protected.

Instructions

1.Open your installed antivirus program from the taskbar. Right-click on the icon. Some antivirus programs will require you to open the software to stop it.
2.Select “Stop protection”. Although each antivirus protection may have a different stop protection, they will have some wording that means "stop protection". After stopping the protection, check it to be sure.
3.In the lower left corner, click on the “Start” button, then click on “Control Panel”, and then click on the “Security Center” button.
4.Look at your "Security Center." It will show that your virus protection is disabled. If you need to turn off the firewall, you can do this by clicking at the bottom of the page "Windows Firewall". This will open a new window that allows you to select “Off” to disable the firewall.
5.Complete the download and enable antivirus protection by clicking on the icon on the desktop or selecting your “Start” button, then “Programs” and click on antivirus software to protect your computer.
6.Enable the firewall in the "Security Center." Run a virus scan and anti-spyware scan to make sure your computer remains safe and free of spyware and viruses.

Instructions

Log into the operating system with an account that has administrator rights. Open the Run utility in the Start menu and enter gpedit.msc in the line, press Enter. In the user configuration window that appears, select the menu called “Administrative Templates”, and then go to components.

In the Management Console, select the "Banned or allowed snap-ins" setting, then find Group Policy Settings. In the snap-in extension, specify the “Not specified” parameter next to each position. After you set the default settings, installation of programs will be available to users of limited accounts.

Move the account to administrators, however, after this, in addition to installing and uninstalling programs user Other operations will also be available. To do this, open the “Control Panel” and go to the “User Accounts” menu. Select the one you need using the mouse and select change account in the menu.

After that, click the “Make computer administrator” button. Save the changes and re-log into the system, check whether the installation and removal of programs and other functions appear for this computer user.

If you want to configure the security settings of your computer in a special way, read articles on this topic, for example, this one: http://stfw.ru/page.php?id=8718. When setting a specific configuration for a particular operating system user, remember that in some cases the setting cannot be changed without changing the account type. Therefore, if, for example, you create an account with limited rights for children, think carefully about each component of the settings that may be needed in the future.

If you do not need the proposed application, then uncheck the box. "Include in download":

4. Install Adobe Flash Player according to your browser type

For Mozilla Firefox browser

Click on the button Download on the download page of the Russian-language site (see link above) - on the official site it’s this button:

1. When the file open dialog box is displayed click the button Save File:

for a suggestion where exactly you can choose the Desktop:

Here is our downloaded original Adobe Flash Player, on the desktop:

To start installation double click on the Flash Player icon.

2. If you downloaded the install Adobe Flash Player installation file without a save prompt, then in the “Downloads” window d Double-click the file name:

3. When a security warning appears , press the button Run:

or Yes :

Note: Please note the publisher before agreeing to installation

Before you run it, you need to close all browser windows, for its successful integration.

If this is not done, the installation will pause with the error:

If this window appears, close Firefox. The installer runs automatically after Mozilla Firefox is closed.:

After successful installation, select the update method. By default, the automatic update option is selected ( P When you select this option, the flash player is updated without your intervention when a new version is released). Adobe recommends using this option to update Flash Player.

But you can choose others:

Click the button Ready. That's it: Adobe Flash Player is installed on your computer.

Note: If you are using Internet Explorer 9 you must disable ActiveX filtering :

In Internet Explorer, select Tools>Security. If ActiveX filtering is checked, uncheck it:

Quit Internet Explorer, and then restart it.

After pressing the button Start installation(or Download) sometimes an information window pops up - we get rid of it by checking the box and clicking on "Close":

And below you will see the version of your Flash Player and your operating system.

PS. For any reason, if the installation fails, Adobe Flash Player must be removed from your computer:

Then restart your computer and re-download and install Adobe Flash Player
Based on materials from helpx.adobe.com, remontcompa.ru, www.dmosk.ru

This documentation has been archived and is no longer maintained.

Software installation

Updated: December 2008

Applies to: System Center Configuration Manager 2007, System Center Configuration Manager 2007 R2, System Center Configuration Manager 2007 R3, System Center Configuration Manager 2007 SP1, System Center Configuration Manager 2007 SP2

A task sequence step allows you to specify the Configuration Manager 2007 package and program that you want to install as part of the task sequence. Installation of the package program will begin immediately, without waiting for the policy polling interval.

The task sequence step runs only on the standard operating system and does not run on Windows Preinstallation Environment (WinPE).

You can configure the following settings.

Name Specifies a short, user-defined name that describes the action that is performed in this step. Description Allows you to specify more detailed information about the action performed in this step. Installing one application Configures a task sequence step to install a single application. This step will wait for the application installation to complete. To specify the Configuration Manager 2007 package that you want to install, click Review. If Configuration Manager 2007 R2 is installed, you can select the Configuration Manager 2007 R2 Application Virtualization package when selecting a package. Use the drop-down list to select the program to use to install the package.

The program you select must meet the following criteria.

It should not initiate a reboot on its own. The program must request a reboot using the standard reboot code, exit code 3010. This will ensure that the reboot is successfully processed at this task sequence step. If the program returns exit code 3010, the internal task sequence engine will reboot. After a reboot, the task sequence will continue automatically.

Configuration Manager 2007 programs that use the option to install a dependent program as part of a package are not supported by operating system deployment. If the program has the option enabled Start another program first, and another program was already running on the target computer, the specified program will be launched. However, if another program is not already running on the destination computer, the task sequence step will fail. Configuration Manager 2007 filters any programs that are disabled and any programs that have the following settings: These programs will not appear in the drop-down menu.

Only after user login
Execute with user rights

Installing multiple applications Select this option to configure sequential installation of multiple applications in a task sequence step Install software. This step specifies a base variable name for a series of task sequence variables, each containing a pair of package identifier values: program name> separated by a colon. A series of variable names are formed by adding a numeric suffix from 001 to 999 to a specified base name. Variable names and associated values form a dynamic list of packages. The list of packages ends when there are no more variable names followed by a numeric suffix. The linked packages will be installed in the order they are listed. Before the installation of each subsequent package begins, the installation of the previous one is completed. The package ID should always be in capital letters. The program name is case-sensitive and must exactly match the name assigned to the program when it was created. Virtual application packages distributed using the Configuration Manager 2007 R2 application virtualization feature are not distributed as part of the application list. If the variable's value is incorrectly formatted or indicates an invalid package identifier and program name, the package installation will fail. If there are no variables with the specified base name and suffix "001", the packages are not installed and the action completes successfully. The selected program must meet the following criteria.

It must be run as the local system account, not as the user account.
It should not interact with the desktop. The program should work without notifications or in automatic mode.

It should not initiate a reboot on its own. The program must request a reboot using return code 3010. This will ensure that the reboot is successfully processed in the task sequence step Install software For example, to install a single application using a task sequence variable named AA001, you must provide the following information. Variable name: AA001 Variable value: CEN00054:InstallTo install three applications, the following additional variables must be specified.AA002 Value: package: CEN00107:Install Silent Task sequence variable: AA003 Value: package id: CEN0031:Install If an application installation fails, continue installing other applications from the list Select this check box so that if the installation of an application from the list fails, the task sequence will run Install software was continued. If this check box is not selected, if installation fails, the task sequence step will exit immediately. If the checkbox is checked, the next package or program from the list of variables will be installed, regardless of errors.

Instructions

1.Open your installed antivirus program from the taskbar. Right-click on the icon. Some antivirus programs will require you to open the software to stop it.
2.Select “Stop protection”. Although each antivirus protection may have a different stop protection, they will have some wording that means "stop protection". After stopping the protection, check it to be sure.
3.In the lower left corner, click on the “Start” button, then click on “Control Panel”, and then click on the “Security Center” button.
4.Look at your "Security Center." It will show that your virus protection is disabled. If you need to turn off your firewall, you can do so by clicking at the bottom of the Windows Firewall page. This will open a new window that allows you to select “Off” to disable the firewall.
5.Complete the download and enable antivirus protection by clicking on the icon on the desktop or selecting your “Start” button, then “Programs” and click on antivirus software to protect your computer.
6.Enable the firewall in the "Security Center." Run a virus scan and anti-spyware scan to make sure your computer remains safe and free of spyware and viruses.

After downloading from the Internet or from a disk, always check for viruses and spyware, if during installation you are told to disable your anti-virus protection and/or firewall.

Note: antivirus installed on the system. Disabling antivirus software

5. Make sure installation is complete

Instructions

Software installation

see also

Instructions

Popular articles

Latest articles

Sections

Pages

Special projects

Contacts