One click results in a double click. Computer mouse: how to get rid of double click

Twitter

Hello, I have logitech mouse on the laptop, I began to involuntarily double-click the left button with one click. This is an abnormal phenomenon, nothing more than a problem that we will solve today.

There are two ways to resolve the situation, your solution may differ from mine, since our mice and systems are different, let’s do a diagnostic! There are two solutions here, mechanical and software, now you will understand everything.

Problem

In this article we solve the problem of involuntary double clicks, which should not exist in principle. That is, we fix glitches and software violations, and perhaps mechanically configure the rodent...

If you just want to change a double click to a single click, so as not to disturb your parents’ sleep, By the way, a note if you don’t yet know how to install Android applications, Odnoklassniki, VKontakte, games and applications, read this post.

Analysis

I came to the conclusion that my problem lies in the mouse itself, Windows itself told me this, quite recently, I switched from 7 to 8.1 and the double-click problem remained.

As a conclusion, we can assume that the problem is in the mouse itself.

How to fix it mechanically, just below. Now, you need to think, do a little analysis.

You may have changed the OS recently, but... is there a click left?

This can also be confirmed by removing the device drivers or reinstalling them.

If you have a cool gaming device, then 100% it comes with a disk with firewood.

Remove old drivers and install them again, or better yet, visit the manufacturer’s website and download fresh driver, for your operating system. How to determine the real office. site and to distinguish it from its double, read (important!).

Here's how to reinstall it: standard driver mouse on Windows:
Start => Control Panel => Device Manager =>

Choose your mouse. Right click to call context menu, "Properties".

“Driver” tab, and uninstalling the driver “Delete”.

We don’t argue with all the Windows warnings, we agree.

If everything goes smoothly, the driver will be completely removed, after which the mouse will stop working.

Now remove the connector and restart the computer, this is not necessary, but it definitely won’t hurt.

Since the mouse is disabled, we use the keyboard to restart the computer.

Click Start, use the arrows and the Tab key to select “Shutdown,” and press Enter.

After the reboot, plug the mouse back into the connector, the system will automatically detect the device and reinstall the driver.

If the double click didn’t disappear anywhere, but simply went to drink tea and returned, we conclude that the solution lies not in the software, but in the device itself. And it needs to be edited for this:

And so, we take a chisel, a hammer and a file and act like this guy on one of the forums:

But seriously, let's look at how this is done.

Mechanical method

We disassemble the mouse by unscrewing several bolts from the bottom, my problem was that the deflection of the plate increased, changed to an indecent state in the micro switch of the left mouse button, the figure shows how to disassemble and fix this nuance:

Using caution and consistency:

1. Unscrew the screw
2. Take out the chip
3. Disconnect power from the chip
4. Hold the chip up to the light

5. Straighten the record.
5.1. Use a knife to disconnect this box.
5.2. We remove the plate with our hands and bend it almost flat.
5.3. Let's install it back.
5.4. We hold the nutcracker with scissors to clamp it and place it in the box.
5.5. Using the same scissors, we take the entire structure by the nutcracker and insert the box back.
5.6. We click it with our fingers, it clicks and that’s it.

6. Connect the power cord back to the chip.
7. Insert the microcircuit.
8. Tighten the screw(s).

The log of your actions may differ slightly from mine, since the designs are different, but the essence does not change.

conclusions

As always, everything depends on the quality of workmanship, as a consequence of the cheapness of our choice.

And from the manufacturer, of course, for example, when buying your problem logitech mouse The sales consultant simply babbled** that the company is simply a leader in the niche and you simply cannot find such quality at a price of 250 rubles.

So, guys, I wish you fewer problems and a good choice!

Did my advice help you? Still have questions?

Be sure to write in the comments, the topic is topical and perhaps my recommendations are not enough!

And also, don’t forget to repost the article on your social networks, I will be pleased

What should you do if the mouse starts making double clicks instead of single clicks (constantly or occasionally), although you only click the button once? The causes of this problem and how to solve it are discussed here.

Causes

Microswitch wear

The most common reason is wear of the microswitch, which results in contact chatter. The left mouse button always requires more clicks than the right (and vice versa if you are left-handed and have configured the mouse to left hand), and the microswitch is designed for a very large, but still limited quantity clicks. You can fix this yourself; it will require your accuracy and half an hour of time. If your mouse is several years old and you don’t want to bother with repairs, the easiest way is to go to the store and buy new mouse.

Place your mouse pointer over that word and double-click with the left mouse button. Place the mouse pointer to the left of the document window next to the line and double-click the left mouse button. Place your mouse pointer to the left of the document window, next to the first selected line, click left button mouse, move the pointer to last line to select, and then release the mouse button.

Place the mouse pointer inside the paragraph and click the left mouse button three times. Place the mouse pointer to the left of the window and click the mouse button 3 times. You can also use the Select All command in the Edit menu. To deselect a word or piece of text, simply left-click anywhere in the text.

Software problem

Double-clicking instead of single-clicking is not necessarily a problem with the mouse. This could be a purely software problem with drivers or additional software.

To determine what the problem is in your case, try connecting the mouse to another computer or laptop. If the symptoms persist, then the problem is obviously the microswitch.

Text formatting is primarily done using the toolbar. It offers the most quick solutions for change key parameters text. Text formatting includes character formatting and paragraph formatting. Additionally, edge size, page size, and orientation can affect the appearance of text.

Character formatting is the definition of their appearance and refers to the type and size of font used, as well as their style. Paragraph formatting consists of setting parameters for the entire paragraph. A paragraph can be centered, right-aligned, indented left or right, or just the first line of that paragraph can be indented. You can also set a specific spacing between paragraph lines.

Solutions

Solution for driver problems

If you have Windows, this method may help: through the “Control Panel”, find the mouse in the list of devices, remove it from there and reboot. After this, the mouse should connect again. Perhaps the double click problem will go away (unlikely).

Software solutions for microswitch wear

MouseFix

There is pure software solution, which helps with contact bounce in a microswitch: Daniel Jackson's MouseFix utility (for Windows). It intercepts clicks that occur a very short time after the first one, since such clicks can only be associated with contact bounce in the microswitch. This utility can be used at least as a temporary solution.

To change the text format, select required fragment text and change its format - choosing from the options available in the toolbar to format the text as needed. Text can also be formatted in other ways. The dialog box that appears as a result of selecting these commands provides a number of text formatting options. The upload window helps you manage and manage your shipments. For user convenience, information about all shipments and access to downloaded files is provided in one manager window.

Download the MouseFix utility and unpack it into a separate folder.
In the All Programs → Startup folder, create a shortcut pointing to MouseFix.exe.
Log out and log back in (or just run the utility manually the first time).

Left Mouse Button Fix

The mouse that took part in the filming has been working successfully for a year and a half after the operation.
How to open the download window?

Hi, I have a Logitech mouse on my laptop, and it started involuntarily double-clicking the left button when clicking once. This is an abnormal phenomenon, nothing more than a problem that we will solve today.

Load window settings

Disclaimer: If you find that you no longer need to download a file, click the Cancel button in the file description area. The line will be less busy and other downloads or browsing will be faster. The file is open. If you want to open the downloaded file at the end of the file, double-click in the upload area. Reset: If the file was not sent or the session was dropped, you can try resending the file.

How to open the download window?

Not only does the loading window keep information about all the items in one place, but there are also tools for making different deliveries. Pause: You can pause the file at any time by clicking the Pause button in the corresponding field. This command can be useful if, for example, when sending large file you need another file more urgently. Selecting one of the most frequently used files from one file at a time and using this command can speed up the download. A Continue button will appear while you wait to download.

Problem

If you just want to change a double click to a single click, so as not to disturb your parents’ sleep, By the way, if you don’t yet know how to install Android applications, Odnoklassniki, VKontakte, games and applications, read this post.

Analysis

I came to the conclusion that my problem lies in the mouse itself, Windows itself told me this, quite recently, I switched from 7 to 8.1 and the double-click problem remained.

As a conclusion, we can assume that the problem is in the mouse itself.

How to fix it mechanically, just below. Now, you need to think, do a little analysis.

You may have changed the OS recently, but... is there a click left?

This can also be confirmed by removing the device drivers or reinstalling them.

If you have a cool gaming device, then 100% it comes with a disk with firewood.

Remove old drivers and install them again, or better yet, visit the manufacturer’s website and download the latest driver for your operating system. How to determine the real office. site and distinguish it from its double, read (important!).

Here's how to reinstall the standard mouse driver in Windows:
Start => Control Panel => Device Manager =>

Choose your mouse. Right-click to open the context menu, “Properties”.

“Driver” tab, and uninstalling the driver “Delete”.

We don’t argue with all the Windows warnings, we agree.

If everything goes smoothly, the driver will be completely removed, after which the mouse will stop working.

Now remove the connector and restart the computer, this is not necessary, but it definitely won’t hurt.

Since the mouse is disabled, we use the keyboard to restart the computer.

Click Start, use the arrows and the Tab key to select “Shutdown,” and press Enter.

After the reboot, plug the mouse back into the connector, the system will automatically detect the device and reinstall the driver.

And so, we take a chisel, a hammer and a file and act like this guy on one of the forums:

But seriously, let's look at how this is done.

Mechanical method

Using caution and consistency:

1. Unscrew the screw
2. Take out the chip
3. Disconnect power from the chip
4. Hold the chip up to the light

5. Straighten the record.
5.1. Use a knife to disconnect this box.
5.2. We remove the plate with our hands and bend it almost flat.
5.3. Let's install it back.
5.4. We hold the nutcracker with scissors to clamp it and place it in the box.
5.5. Using the same scissors, we take the entire structure by the nutcracker and insert the box back.
5.6. We click it with our fingers, it clicks and that’s it.

6. Connect the power cord back to the chip.
7. Insert the microcircuit.
8. Tighten the screw(s).

The log of your actions may differ slightly from mine, since the designs are different, but the essence does not change.

conclusions

As always, everything depends on the quality of workmanship, as a consequence of the cheapness of our choice.

And from the manufacturer, of course, for example, when buying his problematic Logitech mouse, the sales consultant simply lied** that the company is simply a leader in the niche and you simply cannot find such quality at a price of 250 rubles.

So, guys, I wish you fewer problems and a good choice!

Did my advice help you? Still have questions?

Be sure to write in the comments, the topic is topical and perhaps my recommendations are not enough!

And also, don’t forget to repost the article on your social networks, I will be pleased

Instructions

If you have Windows 7 or Vista installed on your computer, click in any Explorer window Windows menu Organize and select Folder and Search Options. The Folder Options dialog box opens.

Now all commands that previously required double-clicking will now be a single click away. For example, to open any file or run a program, you only need to click once on the icon.

If you have a mouse model that has additional buttons, you can configure one of them to activate commands with one click. To do this, you should use special software from the mouse manufacturer, with which you can configure additional buttons.

Helpful advice

Please note that some models of manipulators have additional button, automatically configured to activate system commands in one click. Typically, this button is located directly on the left mouse button, closer to the wheel.

Sources:

how to set up one click mouse

How will they open on a computer? folders, in what form they themselves and the files they contain will be displayed - all this depends on what settings are selected for the folders. All necessary parameters can be configured in the dialog box " Properties folders" To do this, you need to perform several steps.

Instructions

Open the window " Properties folders" There are several ways to do this. Open any folder from any directory on your computer. IN top line menu, select “Service”. In the drop-down menu, left-click on the line “ Properties folders", - the required dialog box will open. Another way: Open Control Panel through the Start button. In the Appearance and Themes category, select the icon Properties folders" If the Control Panel has classic look, the icon you are looking for is immediately available.

In the window that opens, on the “General” tab, set the settings for the display and methods of opening folders on the computer. If in the “Tasks” section you have a marker set in the “Display a list of common tasks in folders” field, the area of your open folders will be visually divided in two. On the right side there will be icons of the files contained in the folders, on the left side there will be tasks that can be performed for these files (rename, copy, delete, and so on). Marker in the “Use regular” field folders Windows" means that the task field will be absent.

In the Browse for Folders and Mouse Clicks sections, set options for how folders are opened: when navigating sequentially from folders into a folder, all actions can take place in the same folder, or each folder can be opened separately, and the folders can be opened either with one click or double click. For example, the path My Computer / Local Disk C can be done in one folder, or you will have two open at once folders: the first is “My Computer”, the second is “C:/”.

Fix is a software tool which can be used to correct the actions taken when your left mouse button is broken. If this aforementioned device double clicks when you are trying to click only once, you might need this app.

Use it on any machine

This utility is portable, which means that you are not required to install it on your computer. You can copy the program files to any location on the hard drive, and simply double-click the EXE in order to launch it. Aside from that, you can place the last mentioned files on a USB flash drive and run Left Mouse Button Fix on any PC you can connect to.

Even though modern Windows iterations come with in the default feature package, it"s best to check if it"s installed because it"s a mandatory requirement.

Another important aspect is that the Windows registry and Start menu will not suffer any changes, and it will leave no trace after its removal.

Clear-cut interface

The UI you are greeted by sports a pretty minimal and straightforward design. To be more accurate, it is only comprised of two buttons which enable you to start and stop the fixing process. Moreover, you can view the number of double clicks fixed. This software tool is also unobtrusive, as it goes in the system tray from the first launch and can be sent there at any point.

Conclusion

CPU and memory usage remains low at all times, which means that your computer’s performance will not be affected, and you can run it alongside other apps without encountering issues.

To sum up, Left Mouse Button Fix is a tiny, yet handy piece of software for people with a broken mouse. It has a good response time and it is accessible to both power and novice users.

Controlling a computer with a mouse is based on an event mechanism. And the most simplest technique- this is pointer hover. Often it allows you to open a submenu or, for example, get a tooltip with additional information.

Another close technique is the rollover. It consists in the fact that when the mouse pointer is held (moved) over a control element, it changes shape. For example, buttons are recessed and then pop up again; The counters rotate one revolution, the drawings are animated (“come to life”). This technique is not used in the Windows operating system itself, but it is used on Internet Web pages and in some programs. Sometimes it is useful to move the mouse over graphic illustrations to see something new that is hidden from the surface.

For example, double-click the My Computer window and the Trash window. In the My Computer window, see how many disks are included in the computer, and in the Recycle Bin window, look at what documents and programs were previously deleted. If the Trash is empty, it means someone has already emptied it :). Don't close it yet open windows- they will be useful to us, but in the next article;).

P.S. I would like to remind you about the folder - My Documents - how do you approach it? Consumer or professional? Link to article: .

Tutorial
Recovery Mode

Once upon a time there was a mouse, and its name was Defender MM-525. She steadfastly pulled her mouse strap - clicked on links, scrolled through pages, moved the cursor. But one day a problem happened - instead of one click, she began making two, or even more. Sometimes you want to pause a video on YouTube, but instead it opens in full screen. Or you select text, but at the last moment the selection is reset. It is clear that this could not continue like this.

What to do? The Internet offers the following options:

At the top is the power supply, at the bottom is the ground, to the right is the wire to the processor input. And at the entrance it has a shutter field effect transistor. In our case, we can assume that this is simply an ideal voltage meter. The voltage is greater than the specified one, which means the output is output by the processor, the input is one, and if it is less, then it is zero.

But if the input to the processor is ideal, then with all due respect the switch cannot be considered as such. When a switch closes, it means that one piece of metal is in contact with another piece of metal. But between the states “off” and “on” there is that awkward moment when these two pieces barely touch. And if there is contact now, then in a microsecond it may disappear, and then be restored again. And sometimes one contact hits another and, according to Newton’s laws, bounces off it, or even several times. What will mother processor think? That's right - he will think that the switch was turned on, off, on, off, on, off, etc. Although “in fact” it was turned on only once. This phenomenon even has its own name - contact bounce.

Wait, doesn’t it remind you of anything? Oh yes, a similar incident just happened to our mouse! This means that our working hypothesis will be that the mouse developers either did not remember the possibility of rattling at all, or their efforts to combat it were in vain. And we will have to fight this enemy for them.

Let's notice two things. Firstly, our click speed is limited. It is unlikely that we will click on the mouse more than ten times per second. Secondly, the switches try to make the moment of rattling pass as quickly as possible, and certainly in one tenth of a second the mouse button will have time to calm down. Thus, our task comes down to separating high-frequency clicks from low-frequency ones, that is, we need a filter low frequencies. The simplest way to do this is to solder a capacitor:

This is exactly what we will do.

Here it is - our button:

And this is the same thing, but without the lid:

Let's sign the contact numbers for convenience:

The principle of operation is obvious - at rest, contacts 1 and 3 are closed, when you press the button for a while, all contacts open, and then contacts 1 and 2 close. When pressed, the same thing happens in reverse order.

We opened the button not to bend anything, but to see with our own eyes how it works, and if we’re lucky, to look at the rattling. And the Samsung WB2000 camera and I96U lens will help us with this. The mentioned device can shoot video at a frequency of 1000 frames per second. True, not so hot, but, as they say, what are they rich in?

The most complex setup for high-speed shooting:

And, actually, the movie:

As you can see, the contact manages to fly the entire required distance in five frames (that is, 5 milliseconds), and no visible chatter is observed. Perhaps the bounce could be seen on the oscillogram, but, unfortunately, I only remembered that I had an oscilloscope when the mouse was already assembled. But one way or another it is clear that the characteristic chatter time is clearly less than minimum time clique, and that the boundary between them is approximately five milliseconds.

Lyrical digression. How would I make a mouse if I had a switch like the one above? And like this:

Cheap and cheerful. The processor input is not only an ideal voltmeter, it is also a capacitor of several picofarads. So in those milliseconds while one contact flies from the second to the third, the voltage will not have time to change noticeably, and when it arrives, the capacitor will charge, and even if the contact jumps, it will still not be able to discharge, so there will be no chatter. Well, unless he jumps right up to the opposite contact, but this, as we have seen, is an extremely unlikely situation.

But the valiant mouse developers, as we will now see, are not looking for easy ways.

Let's measure our switch with a multimeter. First, we find that none of the contacts are shorted to power. Anyway. At rest there is 2.5 volts of power on the second contact, zero on the others. When pressed, all contacts are zero. This suggests that the developers did not follow my path, and the processor input, apparently, is the second contact, and the third contact is not used at all. But the funny thing is that after pressing the zero button, the zero on the second contact remains for another five seconds! Unfortunately, the mechanism of operation and the advantages of such a solution and the motivation of the developers remain a mystery to me. I hope someone in the know can enlighten me.

Thus, our entire harmonious scheme for combating chatter is broken against a blank wall of misunderstanding of modern circuit solutions. But, in fact, don’t stop when the job is almost done. So we will solder without understanding.

We will solder the capacitor between pins 1 and 2. And to measure the effect we will use a script like

I've been using A4Tech mice for several years now, and every time I encounter the same problem: mouse double clicksinstead of single. This happens so often that I decided to write a separate article.So how to remove double click ?

In general, the mouse can double-click for two reasons:1. Mechanical wear of buttons.
2. Problems with drivers or Windows settings. I already wrote about such cases once in an article .

1. Disassemble the mouse

In the first case “surgical” intervention may help. To do this, you need to disassemble the mouse. As I already noted in the article, one screw is under the sticker, one is visible and several more may be under the legs. By at least, that's how it was in mine.

Most likely, when you take it apart, you will see a bunch of dust, debris and similar delights. You need to start cleaning, for this it is best to use a piece of lint-free cloth moistened with alcohol (if you don’t have it, regular vodka will do). After cleaning, if possible, remove the wheel so that it does not interfere with our further work.

2. Correcting the backlash of the buttons

In most cases The problem is the backlash of the buttons. We take regular electrical tape and stick it on as in the picture. But don’t stick too much – it will only make things worse . You can use unnecessary protective film from a smartphone or PDA - it is stronger and more durable.

In the end it will look something like this.

When the glue dries, put the mouse back together. Let's check if everything is fine now. If the button is difficult to press or does not press at all, you need to disassemble the mouse again and remove the excess layer of electrical tape.

3. The problem is in the button sensors

If now the mouse double clicks, then problem with button sensors. Now we are looking sensors left and right button (they are on the board). Typically, sensors are small rectangles with a button on top. Click on this button. If everything is fine, we hear the usual click of your X7 mouse. If the sensor is damaged or broken, then there are only two options:

1. Most mice have three sensors: left, right and middle - under the wheel. They are all exactly the same - so easier for the manufacturer. And since most users don’t really need the middle mouse button, its sensor can be soldered in place of the damaged one. Alternatively, you can take an old unnecessary mouse and resolder a working sensor from there.

2. If you don’t have an old mouse, it’s a pity to sacrifice the middle button, or you don’t have the skills to work with a soldering iron, it’s easier to buy a new mouse. Fortunately, they are inexpensive now.

This is what the left and right button sensors look like.

The second case is when mouse double clicks instead of single due to Windows settings or driver problems, I discuss in the article.

Related materials:

Today I will tell you how to remove double mouse click. As I've already noted, computer mice can double-click for two main reasons:

1. Becausemechanical faults . I described such cases in the article .
2. BecauseWindows settings or drivers the mouse itself.

In this article I consider the second option.

1. Configure mouse settings

Now I'll tell you how to remove double mouse click. Often the problem is solved through Windows settings or the mouse driver itself. Therefore, first you need to look at Mouse Properties. You can find them in the Control Panel: Start -> Control Panel -> Mouse Properties. In the “Mouse Buttons” tab, check if it is enabled mouse sticking. If yes, feel free to turn it off. We also look at "Double click speed". By default, the speed is set slightly above average. Let's try to customize this parameter for ourselves.

This is what the mouse properties look like in Windows 7. The picture shows standard settings.

2. Setting Set up papo parameters To

If setting the mouse parameters does not help, go to Start -> Control Panel -> Folder Options. We look at the “Mouse clicks” parameter. Check the box next to “Open with double click and select with one click.”

This is what the folder properties should look like.

3. Reinstall the mouse driver

How else is it possible remove double click? Let's move on to the most radical method. Let's go to Start -> Control Panel -> Device Manager . We look for our mouse there (usually in the “Mice and other pointing devices” section). Right-click to open the context menu, where we select “Properties”. Next, find the “Driver” tab, where we select driver removal. We agree with all Windows warnings.

The easiest way to remove the mouse driver is here.

If everything is fine, then the driver will be completely removed, after which the mouse will no longer work. Now you can remove it and then restart the computer (this is not at all necessary, but it still won’t hurt). Since the mouse is disabled, you can use the keyboard to restart your computer. Click the Start button, then use the arrows and the Tab key to select “Shut Down,” and then press Enter. Alternatively, you can simply press the corresponding button on the system unit or keyboard.

After the reboot, plug the mouse back into the connector. Windows will automatically detect it and reinstall all drivers.

After this, the problem should disappear. If you are still concerned about the question "how to remove double click" , then the problem is still mechanical wear. More details about this in the article.

Related materials:

Today I will tell you how to remove double mouse click. As I've already noted, computer mice can double-click for two main reasons:

1. Becausemechanical faults . I described such cases in the article .
2. Because the mouse itself.

In this article I consider the second option.

1. Configure mouse settings

Now I'll tell you how to remove double mouse click. Often the problem is solved through Windows settings or the mouse driver itself. Therefore, first you need to look at Mouse Properties. You can find them in the Control Panel: Start -> Control Panel -> Mouse Properties. In the “Mouse Buttons” tab, check if it is enabled mouse sticking. If yes, feel free to turn it off. We also look at "Double-click speed". By default, the speed is set slightly above average. Let's try to customize this parameter for ourselves.

This is what the mouse properties look like in Windows 7. The picture shows standard settings.

2. Setting Set up papo parameters To

This is what the folder properties should look like.

3. Reinstall the mouse driver

How else is it possible remove double click? Let's move on to the most radical method. Let's go to Start -> Control Panel -> Device Manager . We look for our mouse there (usually in the “Mice and other pointing devices” section). Right-click to open the context menu and select “Properties”. Next, find the “Driver” tab, where we select driver removal. We agree with all Windows warnings.

The easiest way to remove the mouse driver is here.

After the reboot, plug the mouse back into the connector. Windows will automatically detect it and reinstall all drivers.

Related materials:

In general, the mouse can double-click for two reasons:1. Mechanical wear of buttons.
2. Problems with drivers or Windows settings. I already wrote about such cases once in an article .

1. Disassemble the mouse

2. Correcting the backlash of the buttons

In the end it will look something like this.

3. The problem is in the button sensors

If now the mouse double clicks, then problem with button sensors. Now we are looking left and right button sensors(they are on the board). Typically, sensors are small rectangles with a button on top. Click on this button. If everything is fine, we hear the usual click of your X7 mouse. If the sensor is damaged or broken, then there are only two options:

1. Most mice have three sensors: left, right and middle - under the wheel. They are all exactly the same - it’s easier for the manufacturer. And since most users don’t really need the middle mouse button, its sensor can be soldered in place of the damaged one. Alternatively, you can take an old unnecessary mouse and resolder a working sensor from there.

This is what the left and right button sensors look like.

The second case is when mouse double clicks instead of a single one due to Windows settings or driver problems, I discuss in the article.

Related materials: