Connecting the tablet to a Wi-Fi router. An important point when setting up a router over a Wi-Fi network

Facebook

IN modern world mobile technologies are becoming increasingly used. Tablets with a variety of operating platforms are a huge success among users from all over the world. Using these devices you can solve various tasks and, above all, they are very comfortable and transportable. However, despite the fact that tablets are extremely popular, many of their users, especially beginners, cannot figure out how to properly connect Wi-Fi on a tablet in order to enjoy good and high-speed Internet.

A Wi-Fi network is no surprise these days, and all modern devices have a wireless connection module installed. Wi-Fi can be found everywhere: at home, at work, in recreational areas, at train stations, subways and many other places. The hotspot is very easy to find.

Setting up Wi-Fi on your tablet

To connect your tablet via Wi-Fi to the Internet, you need to perform a list of simple operations:

First you need to turn on Wi-Fi on the device - this can be done if you have a special widget that will be placed on the gadget’s desktop (sometimes you can open widgets by swiping down on the main screen). You can also activate the module in the settings: just click on “On”.
After the wireless connection is activated, a list of available connections will appear on the gadget screen.
Click on the appropriate network.
If it has a password, you must enter it.

If all steps are completed correctly and the password is entered correctly, the device will be connected to Wi-Fi.

Connecting your tablet to your home network

Before using the home point Wi-Fi access, you need to activate and configure it through the router:

Enter the following numbers in any Internet browser on your PC: 192.168.1.*. (The IP address of your router is indicated on the router itself or the box)
After this, a window will appear where you need to specify the login and key to open access to the router.
If the password is unknown, then on the Internet you can find out the standard login/password for any router model.

All further operations for setting up the router will depend on what specific device is used to distribute the Internet via Wi-Fi.

You need to go to the router settings and find the WLAN section (maybe Wireless Lan).
Here you need to check the Active Wireless LAN box or activate it (set the value to Enable).
Determine what type of security the network will have (WPA2-PSK is best).
You must enter the name in the SSID column wireless point access.
Please indicate the key below and confirm it if necessary.
Save settings.

After the router has been set up, all that remains is to connect to the new wireless network.

Quite often, tablet owners encounter the following difficulty: the tablet does not connect to Wi-Fi - the connection to the network continues indefinitely. Decide this problem possible through the following:

The Wi-Fi network needs to be renamed (preferably in English letters). As practice shows, some gadgets do not want to connect to wireless networks whose names contain at least one Russian letter.
The problem may be with the router. Restart it.
The DHCP server may need to be enabled. To do this, you need to go to the router settings again (DHCP Setup) and check the box next to Enable.
The gadget may not work with a certain type of encryption Wi-Fi networks. To change the type of protection, you need to go to the security settings and try to enter some value. For the new settings to be active, you need to reboot the router.
Another way is to enter the IP address and DNS servers manually. To do this, you need to open the connection settings on the device. They are located in a special window that appears when connected to a Wi-Fi network. You should open the user IP parameters and enter your address in the following form: 192.168.1.***. You also need to fill in the “Gateway” and “DNS” fields with data, which you need to obtain from your Internet provider.

Connecting to a Wi-Fi network in public places

Wi-Fi has faster and better data transmission compared to the cellular network. Using a wireless network makes it possible to achieve significant savings (if you do not have unlimited tariff plan). In addition, many tablets do not have 3G, so connecting to Wi-Fi in in public places is a necessity. Most networks are secure and will require a password to connect.

How to connect a Wi-Fi tablet to a wireless network

The first step is to open the device configuration and go to the wireless connections section.
You need to make sure that the Wi-Fi function on the tablet is activated. This means that the tablet device will search for available networks in active mode. If such a point is detected, it will be shown here, indicating whether the network is password protected or has open access.
You must touch the name of the network to which you will connect.

In the tablet settings, you can activate a function that will periodically notify the user about the availability available networks in the current area. To connect to the network, you need to tap this notification. If you need to deactivate the notification function, you can open the tablet device settings, the “Wi-Fi” section, and uncheck the box next to “Notify when new networks are detected.”

If there is accurate information that there should be wireless networks in the current area, but for some reason they are not displayed on the device, then you need to turn it off and then activate it again Wi-Fi function. To connect to a password-protected network, you need to know the access key. Just enter it in the appropriate field and touch the “Done” icon. To disconnect from a network, you need to touch and hold its name, and then select Remove.

Some points may be hidden and not displayed on the device. In this case, even if the notification function about available networks is active, the access point will not be displayed. To connect to such a connection, you need Wi-Fi settings select the “Add” function, and then specify the network name and password.

When you enter your network name and passkey, be aware that they are case sensitive. You must enter this data very carefully, since the slightest mistake will prevent access to the wireless connection. The function of adding and connecting to an invisible network may not work on some gadgets. This is due to the lack of required software, which must be preinstalled by the gadget manufacturer.

How to activate Wi-Fi without a router, even if there are no other wireless networks? In such a situation, you can resort to the help of others mobile device, for example, a smartphone. You need to make it become an access point and distribute Wi-Fi itself. The required function is present in many devices as standard parameter. If there is none, then you can install third party application, of which there are a lot.

Summarize

In most cases, connecting to Wi-Fi on a tablet does not cause any difficulties. It is enough to use standard features tablet device. If you still have any difficulties with how to connect Wi-Fi on your tablet, it is recommended that you carefully read the above instructions and tips. Wireless Internet the connection is much more convenient and cost-effective compared to mobile networks. You can comfortably download movies, play online games, listen to music and watch videos online.

A tablet, like a laptop, cannot be fully used without an Internet connection. Without an internet connection, you won't be able to download apps, update Android, or use apps that require access to worldwide network. Therefore, the first problem that users who buy a tablet face is how to connect Wi-Fi on the tablet. How to decide similar problem we will tell you using Android as an example Samsung tablet Nexus 10.

The first thing you need to do when connecting your tablet to Wi-Fi is to make sure that the so-called “Airplane Mode” is disabled. "Airplane mode" is a mode in which everything wireless modules are switched off. Therefore, while Airplane Mode is turned on, you will not be able to.

After we have checked "Airplane Mode" we need to open Android settings. You can open the settings using the top curtain, which opens by swiping down, or using the icon on the desktop.

In the Android settings we need to find the Wi-Fi section and enable the module wireless communication Wi-Fi. Most often, the Wi-Fi section is located at the very top of the settings window, and the switch with which you can turn on Wi-Fi is located to the right of the Wi-Fi section.

After you have turned on Wi-Fi module on your tablet, you need to open the Wi-Fi section. After this, a list of all available Wi-Fi networks. Select the Wi-Fi network you need and click on it.

After this, you will see a pop-up window in which you need to enter the password to connect to Wi-Fi. Enter your password and click on the “Connect” button. If necessary, you can check the box next to the “Show password” function. In this case, the password will be displayed as you enter it and it will be easier for you to type text.

If the password you entered is correct, the tablet will connect to Wi-Fi. This is the process Wi-Fi connections on the tablet is finished and you can use the Internet.

How to connect a tablet to Wi-Fi with a hidden SSID

It should be noted that Wi-Fi networks with a hidden SSID do not appear in the list of available networks. If you need to connect your tablet to such a Wi-Fi network, then you must press the button with the plus sign.

After this, a pop-up window will open in which you need to enter a name required Wi-Fi network and password.

How to connect Wi-Fi on a tablet using WPS

WPS (or Wi-Fi Protected Setup) this is the protocol secure connection to a Wi-Fi network without using a password. There are two methods of connecting using WPS: connecting using a hardware button on the router and using a client PIN code. Let's consider both of these options.

In order to connect Wi-Fi using the WPS button, you need to open the list of available Wi-Fi networks on the tablet and click on the button in the form of two arrows.

After this, a window will appear asking you to click on a button on the router.

Without closing this window on the tablet, find the WPS button on the router and press it.

After pressing the WPS button, you need to wait about 1 minute for the tablet and router to connect to each other. After this, you will see a message indicating that the connection to the Wi-Fi network has been completed.

Connecting using a client PIN code occurs in a similar way. Open the drop-down menu and select “Login by WPS PIN code”

After this, a window with a PIN code will open.

When buying a tablet, the issue of connecting to the Internet becomes very relevant. Without it, the device will not be able to use all its functionality and will become a useless piece of plastic. Possibilities and ways to connect the tablet to World Wide Web a lot: most normal use SIM cards and Wi-Fi, computer with special utility, phone as an access point and even the use of exotic adapters for network cable. Let's consider each of these methods separately.

A tablet without the Internet is an unnecessary thing

mobile connection

Allows you to use the Internet anywhere there is coverage. 3G has long been the norm for everyone; in many cities even 4G communications are available, offering access speeds at home levels. Depends on the need to purchase additional equipment and the complexity of the settings, you can use access through the built-in SIM card slot, a mobile 3G router and an external 3G modem.

Built-in 3G module

Majority modern models Android tablets, even budget ones, are equipped with a 3G module, allowing you to use the device as regular phone. If not every model can make calls, then access to the network is possible on any of them. You will need to purchase a SIM card from any Russian operator. After that select suitable tariff for the Internet and make simple settings.

For settings on your Android tablet, you need to go to Settings - Wireless & networks - More - Mobile network. Create new point access. Operators offer automatic settings, but in rare cases they need to be entered manually. You can learn more about the parameters from the operator’s technical support.

For settings on iPad, go to Settings - cellular - Cellular network data transfer and add connection parameters. Some Windows tablets have a built-in 3G module. When connecting for the first time, click on the Internet icon - select the operator's name - adjust the settings and connect.

3G router

This and all other methods will have to be used on those tablet models that do not have a SIM card slot.

Having purchased such a router and inserted a SIM card into it, enter the interface using the information from the user manual or indicated on the router to establish an Internet connection. This requires a computer. When you buy a device from an operator, the settings are usually set automatically. After completing the procedure, connect to the Wi-Fi network from your tablet.

3G modem

Here you will have to tinker a little, and in addition to the tablet and router itself, you will need a computer or laptop. Please note that using this method is not possible on every model. If your tablet supports OTG mode, then we proceed to the next stage. Follow these steps:

Insert the modem into the computer. Wait for it to be determined by the system. The proprietary configuration utility should launch.
Disable PIN code verification.
Download the 3G modem “Mode switcher” program and install it on your computer.
Use it to switch the device to Modem Only mode.
After successfully changing the mode, disconnect from the PC and connect the modem to the tablet using an OTG cable.

Home Internet

Wi-Fi router

This is the most easy way use landline internet on the tablet. If you already use it on other devices, for example, a TV, a computer, then simply select your home network, enter the password and enjoy it. You can also connect your phone if you want to save money mobile traffic. If you just purchased a router, then configure it on your computer via a disk with a utility or a web interface, entering the connection parameters of your Internet provider and using a reliable security method.

Ethernet cable adapter

It is the most exotic and rarely seen way to connect an Android tablet to the Internet. You will need a special USB-network adapter. It is unlikely that you will find it in every store, but you can order it online without any problems. We recommend this method only to very experienced users, otherwise you may damage the tablet. Our next steps:

On the website http://forum.xda-developers.com, download special drivers for your Android tablet and install them in “Recovery” mode. Each model has its own drivers, so read it very carefully.
Connect the tablet to the adapter via an OTG cable, insert the power cord at one end into the router and the other into the adapter. The Internet should work.

Other computer equipment

Telephone

This is relevant when you have an Android or iOS phone and a tablet without SIM card support, but with Wi-Fi. We will use the phone as a Wi-Fi router. To do this on Android, go to Settings - Wireless networks - More - Modem mode - Wi-Fi access point. Rename the connection and create a password. After activating the mode, you can connect to the Wi-Fi network on your tablet. On an iPhone, this mode is activated through Settings - Cellular - Modem Mode. Please note that the battery of your access point will quickly deplete, so you can connect your phone via a USB cable and activate the USB modem in settings.

Laptop and special programs

When there is a computer or laptop connected to home internet, and there is no router, try installing a special program to organize an access point from a laptop. The most famous are “ Connectify Hotspot" and "MyPublicWifi" (more about this - How to distribute Wi-Fi from a Windows 8 (8.1) laptop, Programs for distributing Wi-Fi from a laptop). It is very convenient to use this method when traveling, since not all hotels have wireless connection, while the cable may be in each room or when it is not possible to buy a router for the home, or is simply impractical.

Conclusion

We've covered everything possible ways connecting the tablet to the Internet. Choose the one that is most appropriate in your situation and depending on your technical background.

How do you connect to the Internet? Leave comments.

TO wifi networks, first of all you need to turn on the wireless connection. To do this, open the settings and enable wifi module. The settings differ slightly depending on the type of operating system installed on your .

If you prefer iPad, then you should open the first screen, then go to “Settings”, select “wifi” (at the very top). By turning on the “lever”, you will immediately see a list of available networks.

In tablets on which it is installed Android platform, the principle of operation is approximately the same. To enable the connection module, you must also go to “Settings” and select “ Wireless connections».

After turning on the connection, a list of available networks will open in front of you. To successfully connect, all you have to do is select the network you need. If next to wifi icon is located depicting a lock, then this network is protected by a password, without which you will not be able to connect to it. If there is no “lock”, then the network is open and you can connect to it without hindrance.

There are times when you know for sure that there is a network at your location, but it is not automatically found. This is where adding a network manually comes in handy. To do this, select “Other” (in iOS) or “Add network” (in Android), then enter the network name, security settings (usually WPA/WPA2 PSK) and password.

pay attention to additional settings. The iPad has a "Confirm Connection" button. If you press it, then every time you try to connect to an access point that you have already connected to, the device will ask you for permission. For home network It's inconvenient, but if you've connected once in a cafe and don't want to do it again, this feature will be quite useful.

If you wish, the device can “forget” the network it connected to. Then when you try again you will have to enter the password again.

Connecting wifi at home

A home wifi network is very convenient and allows you to perform the same operations as on a computer at comparable speeds. Using special applications You can chat with friends on VKontakte or watch YouTube without leaving the couch.

Anyone who has a connection at home can create a home point. To do this, you need to purchase a router and configure it according to the instructions.

To protect your connection, you need to register .

You can connect several devices to one access point: laptops, tablets, phones, etc.

Wifi connection in public places

Away from home, you can also use a wifi network. Now in almost all cafes and restaurants, in many shops, shopping centers, museums and other places there are points wifi access. As a rule, they are open. If a password is set on them, you can find it out from the administrators.

Please note that open networks create a vulnerability for your data. Under no circumstances use online banking via open wifi networks. Also, when connecting to the Internet via open wifi, you do not need to enter passwords, logins and other secret data on websites.

You should use email and social networks with caution while connected to open wifi. If you often have to do this, then in the settings social networks And mail servers(where available) you should specify that you always use a secure connection.

In the last few years tablet computers have become ordinary companions of any modern man. They are compact, easy to use and multitasking. However, the main function that most owners use is, of course, access to the Internet.

You can plunge into the vastness of the Internet using a tablet in two ways: using the service mobile Internet(if your tablet has a SIM card slot) or by connecting to a Wi-Fi wireless network. As a rule, mobile Internet settings are automatically sent cellular company, so there is no point in focusing on this. When connecting to Wi-Fi, things are a little different: it all depends on the level of network security and the specifics of your tablet’s operating system.

So, there are several levels of Wi-Fi network protection. It can be open or closed. If the network is open, then there are no problems - any device can freely connect. If this is a closed, secure network, then the user must enter a password set by the owner of the network. However, sometimes a password is not enough. If in the settings of the router distributing wifi signal, filtering by Mac addresses is enabled, then you can connect to such a network only with the personal permission of the owner. This method protection is usually used only on home networks.

A Mac address is a unique device address assigned to it by the manufacturer and does not change under any circumstances (unlike an IP address, which can vary depending on the network to which the device is connected).

Let's give detailed instructions connection to a Wi-Fi network for tablet users of the three most common operating systems: Android, iOS and Windows 8.

Important! Be sure to check that you entered the password correctly, otherwise access will be denied!

How to connect an Android tablet to Wi-Fi

First of all, go to the settings menu.
In the “Networks” section, activate the Wi-Fi icon and go to the window of available networks. If necessary, click “Search”.
After I found the tablet the desired network, and it appears in the list, click on its name. Pay attention to the mark under the name of the network: “Protected” or “Unprotected”.
If the network is open, or unsecured, then nothing else is required - you are already on the Internet!
If this is a secure network, a window will open with a password entry line. Simply enter the required characters, having previously learned them from the owner of the access point. Once “Connected” appears under the network name, you can safely use the Internet.

How to connect an iOS tablet to Wi-Fi

Click on the “Settings” icon.
On the left panel, select the “Wi-Fi” line and move the switch to active position. This opens a list of available networks.
Select the desired network with one touch. In this case, you should also pay attention to the icons to the right of the access point name: the icon in the form of a lock shows that the network is protected.
After selecting an access point, a window appears with a field for entering a password. We find out the password from the owner of the network, enter it, and click “Connect”. Ready!

How to connect a Windows 8 tablet to Wi-Fi

On the desktop on the taskbar we find an icon in the form of an antenna “ Network connections" This will open a panel on the right with a list of available networks.
Find the desired network, select it and click “Connect”.
A secure network will require you to provide a password. Enter in the window that appears the desired combination characters.
After “Connected” appears next to the name of the access point, you can use the network.