I've been preparing my iPhone for restoration for a long time. Update iPhone over Wi-Fi


When a person tries to restore his iPhone, but problems begin, many questions arise. To use the device in normal mode and troubleshoot, you need to figure out why this or that error appeared and what it means.

Description of common errors when restoring an iPhone

1. One of frequently asked questions What users are asking is: “what to do if you couldn’t restore your iPhone, error 3194 is preventing this process.” This means that iTunes program cannot request the required SHSH from the server. You can solve this problem as follows: you need to check the version of your iTunes program and install the latest one. Most often this is the solution to the problem. After that, restore your phone.

Increase

Another method is performed if the previous one did not show results. This is done easily:

  • You need to exit the program and find the hosts file in the C:\Windows\System32\drivers\etc\ folder.
  • Next, you need to open the file with Notepad and delete the line “74.208.105.171 gs.apple.com”, and then save the document.
  • After this, you need to connect the device to the computer by launching iTunes and entering DFU mode.
  • To do this, hold the lock button and after 3 seconds hold down the main button with it. Then, after 10 seconds, release the lock and wait without releasing the Home button. You will see gray screen on your device.
  • After this, you can try restoring the firmware again.

If this all works out, it is best to delete the line from the hosts file again and in the future you will be able to update from official servers.

Another way is to restore the system using special programs, for example, TinyUmbrella, which will help troubleshoot the problem.

2. When your iPhone does not want to recover and error 1 appears, there could be several reasons.

What to do in this case?

  • Update iTunes.
  • You can make sure that you are using the latest firmware on your phone, or simply install the newest one.
  • It's also best to reconnect USB cable to another port.
  • Try restarting your computer.

3. In case of error 9, the USB cable itself may be to blame.

  • Try to examine it in detail and check for damage.
  • Try inserting it into a different port on your computer.
  • Restart your computer or get a new cable to make sure everything works.

4. Error 1015 is common when your iPhone's modem version is changed to a lower version. The problem appears if the device's Baseband has more than new number than the one in the firmware. To resolve the issue, do the following.

Users report that their iPhone8/X cannot restore the backup copy from the latest one backup copy By various reasons. In this article, we have listed the reasons and corresponding solutions when you were unable to restore your iTunes or iCloud backup.

Part 1: Fix iTunes couldn't restore iPhone

When you have problems with iPhone not restoring from backup iTunes copies, below you can find useful tips.

iTunes backup is corrupted or incompatible

When you are in this situation, removing damaged files backup copies - good way to fix the error - iPhone cannot restore the backup.

1. Firstly, you should find backups of your iPhone8.

On PC with Windows 7,8 and 10:

To find a list of backups, select \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\

You can also do next steps.
Find the search string:

In Windows 7, click the Start button.
In Windows 8, click the magnifying glass icon on the right top corner screen.
On Windows 10, go to the search bar next to the Start button.

Type %appdata% in the search bar and press Enter, then click these folders: Apple Computer > MobileSync > Backup.

On Mac:

Step 1: Click on search in the menu bar.
Step 2: Type or copy and paste next text: ~/Library/Application Support/MobileSync/Backup/
Step 3: Press Enter.

To find a specific backup, follow these steps:

Open iTunes. From the menu bar, click iTunes and select Preferences.
Select "Devices".

Control-click the backup you want and choose Show in Finder.

2. Copy your iOS backups to another location, such as your desktop or external drive.

3. Open iTunes on your computer and select "Devices".


4. Select all backup files and click "Delete Backup".

5. Copy all previous backup files back to the Backup folder.

6. Try restoring iTunes again.

If this doesn't help, you may want to consider deleting all backups and creating a new backup if the new iPhone doesn't see the iTunes backup.

Error when restoring a backup

If the message says unknown error, you cannot restore iPhone 8 from iTunes backup, you can turn to free Tenorshare TunesCare. Instead of trying every time to use possible solutions Tenorshare TunesCare offers the ultimate solution to fix various errors iTunes sync/backup/restore.


iPhone is disabled or not recognized by iTunes

Make sure it's new iTunes version updated.
Check the USB cable and connections.
Restart your computer and iPhone 8.
Put your iPhone into recovery mode with a free one that will be detected.

Backup password is incorrect

If you enabled an encrypted backup and accidentally forgot backup password There is no way to restore iTunes backup to your iPhone 8 unless you remove the password using a third party software, such as . Learn more about how to remove a backup password iPhone copies, .

Part 2: New iPhone 8/8 Plus cannot restore data from iCloud backup

In another situation, if you are using a backup iCloud copy and can't restore iPhone from iCloud iOS 11, everything is different. Most iCloud backup errors are caused by:

Not enough space on iPhone 8

If previous file backup is large enough in size, you may be prompted to specify that you want to restore from the backup iCloud copies not enough space. In this case, it is suggested to clear some space on iOS device. - good tool to recover limited storage space.

iCloud recovery takes too long to complete

The problem iPhone won't complete restoring from iCloud backup is mainly caused by slow network connection, and also large size file. Make sure your device is connected to a reliable and stable Wi-Fi networks, and then wait patiently.

Or you can try the backup alternative iTunes copying- . Supporting both iTunes and iCloud backups, UltData processes recover with incredible speed. You just need to log in to your account Apple entry ID and select the file to backup.


Some items cannot be recovered or iCloud recovery is incomplete

When your backups contain purchases made from more than one Apple ID, you will be prompted to send a message requiring you to sign your Apple ID, otherwise the iPhone cannot be restored from the backup. Click "Skip this step" and sign in later.

Hope these suggestions work for you. Share it if this article helps in resolving your iPhone 8/8 Plus/X will not be restored from iTunes/iCloud backup.

If a user encounters problems on an iOS device, the most effective solution iPhone will be restored to factory settings or from a backup. However, it is not always possible to do this. As practice shows, restoring an iPhone from a backup in iTunes or iCloud does not always end in success. Some, judging by the reviews on the forums, experience errors such as 3194, 4013 during the recovery process. If you encounter a similar problem, use the solution described below.

iPhone cannot be restored after updating to iOS 11

If you installed on your mobile device the latest version of the software and now you want to restore your iPhone via iTunes, but iTunes does not recognize your device when connected, most likely the problem again lies in the operation of the Apple media processor.

Check what version of iTunes you have installed - it may be outdated. If yes, then install the most current one. After that, put your device into recovery mode and connect it to iTunes again to try again. If necessary, use TunesCare again to resolve sync issues mobile device from iTunes.

Can't restore iPhone - unknown error

If you connect your smartphone to your computer and launch iTunes, then begin the recovery procedure, and a notification appears on your screen stating that the iPhone cannot be restored because an error has occurred (error code), then you should use the program.

The most frequent mistakes usually 3194, 9, 4014. Each one indicates a specific problem. For example, error 4014 indicates faulty cable, a damaged port, or some other hardware problem. If the error is related to the operation of the iTunes program, then you need to fix it.

Restoring from iCloud backup takes too long

If, during the process of activating and setting up your iPhone, you selected the restore function from iCloud backup, and the process takes too long and never ends, most likely the device has lost a stable connection to the Network.

Check Wi-Fi connection, to which the iPhone is connected. If necessary, connect your phone to a power source. Only then start the recovery process again.

4 situation. iPhone stuck in recovery mode

You are trying to restore your device, but it is stuck in recovery mode. You try to update it through iTunes, but a message appears saying that you need to restore it. Once the restore process is complete, the phone reboots and asks you to restore or update again.

To get out of this vicious circle, use the program. Free tool will allow you to exit recovery mode with one click. After which you can perform the restore again through iTunes.

Can't restore iPhone after jailbreak

A common situation among the jailbreak community. Trying to restore your phone after jailbreak results in a crash and a pop-up message stating that the device is not suitable for the requested build. What to do in this case?

Transfer your phone to DFU mode and try to restore again. It can also help to cope with the error ReiBoot program– with its help you can return your iPhone to factory settings.

How to reset iPhone/iPhone to factory settings without iTunes & password

How to restore iPhone if it is locked

Another possible situation is if you forgot your phone password, made several unsuccessful attempts to enter the PIN code, and the device became locked. If in this case you try to restore via iTunes, at some point you will still be asked to enter the password for the device.

If you have Find My iPhone set up on your phone, you can open iCloud, sign in with your Apple ID, select your phone in the My Devices section, and click the Erase button. After this, you will need to restore all data from the backup.

iPhone cannot be restored - not enough memory

Very common during recovery iPhone program iTunes refuses to do this and says that there is not enough memory on the device. You can view memory consumption statistics through the application. Settings – General – StorageiPhone.

If you really don't have enough memory, delete it. large applications, photos and other data. If there is space, but the message still pops up, then you need to update iTunes to the latest version. latest version, update iOS, restart your computer and iPhone.

If you find yourself in one of these situations, we hope that the solutions described helped you fix the problem. If you still cannot restore your iPhone, ask us your questions in the comments.

After changing iPhone 7/6/5 for a new top-end iPhone model 10, many users wondered how to quickly transfer data from an old iPhone to a new one. Of course, the most common way for everyone is to back up all data on one device and then restore it on another. This can be done through iTunes or iCloud. However, not everyone succeeded: some “users” report that the iPhone is not restored from a backup. Why this happens and how to restore data from a backup copy will be described in detail below.

Can't restore iPhone X from backup

So, let's figure out why users are unable to restore data to iPhone X from a backup made on the old one. In order to transfer all data from iPhone 7 to iPhone 10, you must first backup all information on your old iPhone.

How to Recover Data on iPhone X from iPhone 7/7 Plus Backup

This can be done through iTunes by connecting the device using a USB cable and selecting the appropriate function in the program window. Or backup can be done via iCloud. To do this, open the application on iPhone 7 Settings - Accounts and passwords -iCloud – Backup toiCloud, activate the slider and click Create a backup.

After this you are left with iPhone activation select the option to restore from iTunes/iCloud backup and wait until the process is completed. If iPhone is not restored from iPhone backup, then something went wrong.

I can't restore from a backup via iTunes

The most important condition for successful recovery is the absence of a conflict between operating systems. Installed on the phone new platform iOS 11. If installed on your device operating system below iOS 11.2/11.1 (such as iOS 10 or iOS 10.2, etc.), then you will not be able to restore your device from a backup. It is necessary that both devices have iOS 11 installed, but the firmware version is not important. Then do the following:

1. Update your iPhone to the latest current version iOS firmware 11.

2. Back up all your data again via iTunes or iCloud (whichever is convenient for you).

3. After that, restore from the backup on your iPhone, specifying last file backup.

How to Recover Data on iPhone X from iPhone 7 Backup Using UltData

If you still cannot restore your device from a backup copy in a standard way, then you can use the program. It is designed to recover deleted and lost data and allows you to use three different ways. In our case, we can use only two methods - restore from an iTunes or iCloud backup file.

1. Back up all your data to iTunes or iCloud, whichever is convenient for you.

2. Download the UltData program to your computer, install and run. Then connect your iPhone using a cable to your computer.

3. In the program window that opens, select “Recover from iTunes Backup Files” if you backed up your iPhone 7 using iTunes. From the list of backup files, select the last one you just made in the first step. Select and click on the scan button.


4. Once the scan is complete, you will be asked to select required types files with preview capabilities.


5. Select and click on the restore button. All files will be automatically saved to your new device.

The advantage of using the UltData program is the ability to restore not all data from a backup copy, but selectively - only those that are needed. You can use the tool on both Mac and Windows. You can also use the utility to recover accidentally deleted files.


2024 gtavrl.ru.